Next Article in Journal
Defect Creation in the Root of Single-Crystalline Turbine Blades Made of Ni-Based Superalloy
Next Article in Special Issue
Identification of Mechanical Properties for Titanium Alloy Ti-6Al-4V Produced Using LENS Technology
Previous Article in Journal
Influence of Manufacturing Parameters on Mechanical Properties of Porous Materials by Selective Laser Sintering
Previous Article in Special Issue
The Influence of Post-Weld Heat Treatment on the Microstructure and Fatigue Properties of Sc-Modified AA2519 Friction Stir-Welded Joint
 
 
Article

Article Versions Notes

Materials 2019, 12(6), 872; https://doi.org/10.3390/ma12060872
Action Date Notes Link
article xml file uploaded 15 March 2019 07:32 CET Original file -
article xml uploaded. 15 March 2019 07:32 CET Update https://www.mdpi.com/1996-1944/12/6/872/xml
article pdf uploaded. 15 March 2019 07:32 CET Version of Record https://www.mdpi.com/1996-1944/12/6/872/pdf
article html file updated 15 March 2019 07:33 CET Original file -
article html file updated 4 April 2019 13:45 CEST Update -
article html file updated 9 April 2019 18:51 CEST Update -
article html file updated 11 April 2019 21:54 CEST Update -
article html file updated 26 April 2019 02:52 CEST Update -
article html file updated 16 October 2019 15:31 CEST Update -
article html file updated 11 February 2020 22:23 CET Update https://www.mdpi.com/1996-1944/12/6/872/html
Back to TopTop