Skip to Content
You are currently on the new version of our website. Access the old version .
SensorsSensors
  • Article
  • Open Access

10 July 2020

16 Pages

Power Control and Clustering-Based Interference Management for UAV-Assisted Networks

,
and
School of Information and Communication Engineering, Beijing University of Posts and Telecommunications, Beijing 100000, China
*
Author to whom correspondence should be addressed.
This article belongs to the Special Issue UAV-Based Smart Sensor Systems and Applications

Abstract

Unmanned Aerial Vehicle (UAV) has been widely used in various applications of wireless network. A system of UAVs has the function of collecting data, offloading traffic for ground Base Stations (BSs) and illuminating coverage holes. However, inter-UAV interference is easily introduced because of the huge number of LoS paths in the air-to-ground channel. In this paper, we propose an interference management framework for UAV-assisted networks, consisting of two main modules: power control and UAV clustering. The power control is executed first to adjust the power levels of UAVs. We model the problem of power control for UAV networks as a non-cooperative game which is proved to be an exact potential game and the Nash equilibrium is reached. Next, to further improve system user rate, coordinated multi-point (CoMP) technique is implemented. The cooperative UAV sets are established to serve users and thus transforming the interfering links into useful links. Affinity propagation is applied to build clusters of UAVs based on the interference strength. Simulation results show that the proposed algorithm integrating power control with CoMP can effectively reduce the interference and improve system sum-rate, compared to Non-CoMP scenario. The law of cluster formation is also obtained where the average cluster size and the number of clusters are affected by inter-UAV distance.

Article Metrics

Citations

Article Access Statistics

Multiple requests from the same IP address are counted as one view.