Search Results (542)

Using waste biomass as a raw material for the combined production of electricity and heat offers corresponding energy, economic, environmental and resource efficiency benefits. The study examines both the performance of a system for combined energy production based on the Organic Rankine Cycle (ORC) utilizing wood biomass and the market interest in its deployment within Bulgaria. Its objective is to propose a technically and economically viable solution for the recovery of waste biomass through the combined production of electricity and heat while simultaneously assessing the readiness of industrial and municipal sectors to adopt such systems. The cogeneration plant incorporates an ORC module enhanced with three additional economizers that capture residual heat from flue gases. Operating on 2 t/h of biomass, the system delivers 1156 kW of electric power and 3660 kW of thermal energy, recovering an additional 2664 kW of heat. The overall energy efficiency reaches 85%, with projected annual revenues exceeding EUR 600,000 and a reduction in carbon dioxide emissions of over 5800 t/yr. These indicators can be achieved through optimal installation and operation. When operating at a reduced load, however, the specific fuel consumption increases and the overall efficiency of the installation decreases. The marketing survey results indicate that 75% of respondents express interest in adopting such technologies, contingent upon the availability of financial incentives. The strongest demand is observed for systems with capacities up to 1000 kW. However, significant barriers remain, including high initial investment costs and uneven access to raw materials. The findings confirm that the developed system offers a technologically robust, environmentally efficient and market-relevant solution, aligned with the goals of energy independence, sustainability and the transition to a low-carbon economy. Full article

Robotic timber joinery demands integrated, adaptive methods to compensate for the inherent dimensional variability of wood. We introduce a seamless robotic workflow to enhance the measurement accuracy of the Workpiece Coordinate System (WCS). The approach leverages a Zivid 3D camera mounted in an eye-in-hand configuration on a KUKA industrial robot. The proposed algorithm applies a geometric method that strategically crops the point cloud and fits planes to the workpiece surfaces to define a reference frame, calculate the corresponding transformation between coordinate systems, and measure the cross-section of the workpiece. This enables reliable toolpath generation by dynamically updating WCS and effectively accommodating real-world geometric deviations in timber components. The workflow includes camera-to-robot calibration, point cloud acquisition, robust detection of workpiece features, and precise alignment of the WCS. Experimental validation confirms that the proposed method is efficient and improves milling accuracy. By dynamically identifying the workpiece geometry, the system successfully addresses challenges posed by irregular timber shapes, resulting in higher accuracy for timber joints. This method contributes to advanced manufacturing strategies in robotic timber construction and supports the processing of diverse workpiece geometries, with potential applications in civil engineering for building construction through the precise fabrication of structural timber components. Full article

China’s timber market is very complex and heterogeneous, and is experiencing the impact of the construction of national reserve forests and the downturn in the real estate sector. By setting up a partial equilibrium model which reflects the heterogeneity of China’s wood market, not only difference among domestic timber groups can be identified, but the dissimilarity of imported timber can also be differentiated from the aspects of species and sources. This model is capable of capturing the effects of macroeconomic conditions, forestry sector policies, and trade cost variations on China’s timber market structure. According to simulations of supply shocks, China’s large-diameter log capacity enhancement will have a noticeable crowding-out effect on imported timber, suggesting the diameter of logs is an important factor for market entities to make trade-offs between domestic and imported timber. Amidst both supply and demand shocks, the equilibrium quantity changes in China’s domestic small-diameter logs and imported timber are dominated by demand shocks, whereas the equilibrium quantity change in China’s domestic large-diameter logs is dominated by supply shocks; moreover, only domestic large-diameter logs realize quantity increase in double shocks; this improves China’s domestic timber supply structure, and is a good example of “opportunities in crisis” in the face of negative demand shocks. Full article

Canadian sawmills commonly use chipper-canters to process softwood logs into squared lumber and wood chips for pulp mills. However, the declining demand for newsprint and print paper has led to an oversupply of wood chips, resulting in economic losses and environmental concerns. To address this issue, a strander-canter capable of producing both softwood cants and strands for oriented strand board (OSB) presents a promising alternative. This study evaluates the feasibility of using jack pine strands generated by a novel strander-canter equipped with a cutterhead for OSB strand production. Strands were generated from frozen and unfrozen logs under varying cutting parameters and incorporated in the core layer of the panels. Industrial aspen strands were used for the surface layers. OSB panels were assessed for mechanical and physical properties following the CSA O325:21 standard. Strand size distribution and vertical density profiles were also analyzed. The results indicated that panels made from jack pine strands demonstrated bending and internal bond properties that were either comparable to or superior to those of the control panels. However, including jack pine strands in the core layer increased the thickness swelling of the panels. Full article

Societies are aiming to have a higher ecological consciousness in wastewater treatment operations and achieve a more sustainable future. With this said, global demands for larger quantities of resources and the consequent waste generated will inevitably lead to the exhaustion of current municipal wastewater treatment works. The utilization of biosolids (particularly microbial proteins) from wastewater treatment operations could generate a sustainable bio-adhesive for the wood industry, reduce carbon footprint, mitigate health concerns related to the use of carcinogenic components, and support a more circular economic option for wastewater treatment. A techno-economic analysis for three 10 MGD wastewater treatment operations producing roughly 11,300 dry pounds of biosolids per day, in conjunction with co-feedstock defatted soy flour protein at varying ratios (i.e., 0%, 15%, and 50% wet weight), was conducted. Aspen Capital Cost Estimator V12 was used to design and estimate installed equipment additions for wastewater treatment plant integration into an urban biorefinery process. Due to the mechanical attributes and market competition, the chosen selling prices of each adhesive per pound were set for analysis as USD 0.75 for Plant Option P1, USD 0.85 for Plant Option P2, and USD 1.00 for Plant Option P3. Over a 20-year life, each plant option demonstrated economic viability with high NPVs of USD 107.9M, USD 178.7M, and USD 502.2M and internal rates of return (IRRs) of 24.0%, 29.0%, and 44.2% respectively. The options examined have low production costs of USD 0.14 and USD 0.19 per pound, minimum selling prices of USD 0.42–USD 0.51 per pound, resulting in between 2- and 4-year payback periods. Sensitivity analysis shows the effects biosolid production fluctuations, raw material market price, and adhesive selling price have on economics. The results proved profitable even with large variations in the feedstock and raw material prices, requiring low market selling prices to reach the hurdle rate of examination. This technology is economically enticing, and the positive environmental impact of waste utilization encourages further development and analysis of the bio-adhesive process. Full article

The growing demand for sustainable materials has intensified the search for biodegradable polymers. Poly(ε-caprolactone) (PCL), though biodegradable, is fossil-derived. In this study, a novel lignin extracted from pine wood using a green solvent was incorporated into PCL and compared with commercial lignins (dealkaline, alkaline, and lignosulfonate). The lignin additions imparted antioxidant properties, enhanced thermal stability, and promoted circular economy goals through lignin valorization. Notably, the green-extracted lignin showed superior compatibility with PCL when compared with commercial lignins, as evidenced by lower water uptake and solubility, and improved surface hydrophobicity (higher contact angle). Although the addition of lignin reduced the tensile strength and elongation at break, it greatly increased the PCL radical scavenging activity (DPPH) from 8 ± 1% of neat PCL to 94.8 ± 0.3% when 20 wt% of lignin-LA was added. Among the tested lignins, lignin-LA stands out as the most promising candidate to be applied as a functional additive in biodegradable polymer blends and composites for advanced sustainable applications. Not only given its intrinsically higher sustainability but also due to its capacity for improving the thermal properties of PCL–lignin blends. Full article

Energy demand in the building sector has drastically increased due to rising occupant comfort requirements, accounting for 30% of the world’s final energy consumption and 26% of global carbon emissions. Thus, to improve building efficiency in heating and cooling applications, phase change material (PCM)-based passive thermal management techniques have been considered due to their energy storage capabilities. This study provides a comprehensive review of the research on PCM applications, types, and encapsulation forms. Various solutions have been proposed to enhance PCM performance. In this review, the authors suggest new methods to improve PCM efficiency by using the multilayered wall technique, which involves employing two layers of a hybrid bio-composite—specifically, the hybrid hemp/wood fiber-reinforced composite with a polypropylene (PP) matrix—along with a layer of PCM made from spent coffee grounds (SCGs). Previous studies have shown that oil extracted from SCGs demonstrates good thermal and chemical stability, as it contains approximately 60–80% fatty acids, with a phase transition temperature of approximately 4.5 ± 0.72 °C and latent heat values of 51.15 ± 1.46 kJ/kg. Full article

Native forest timber supplies are declining, and industry needs to do more with less to meet growing demand for wood products. An Australian-based, vertically integrated timber manufacturing business is commissioning a spindleless lathe to produce engineered wood products from small logs. The literature on innovation in timber manufacturing was found to generally focus on technical innovation, with relatively little use of market-oriented concepts and theory. This was particularly true in the Australian context. Using a market-oriented case study approach, this research assessed innovation in the business. It aimed to inform industry-wide innovation approaches to meet market demand in the face of timber supply challenges. Interviews were conducted with key personnel at the firm. Data and outputs were produced to facilitate comparison to existing research and conceptual frameworks. The business was found to empower key staff and willingly access knowledge, information and data from outside its corporate domain. It was also found to prioritise corporate goals outside of traditional goals of profit and competitive advantage. This was shown to increase willingness to try new things at the mill and increase the chances that new approaches would succeed. Thinking outside of the corporate domain was shown to allow access to resources that the firm could not otherwise count on. It is recommended that wood processing businesses seek to emulate this element of the case study, and that academia and the broader sector examine further the potential benefits of using enterprise and market-oriented lenses to better utilise available resources and maintain progress towards corporate goals. Full article

In the field of the wood industry, the competitive effect caused by interregional resource differences and the linkage effect generated by industrial chain synergy profoundly affects the development direction of the industry in each province. Based on China’s input–output table from 2002 to 2017, this paper constructs an industrial comparative advantage measurement model using location entropy and finds that the industrial agglomeration advantage of the wood products industry in Heilongjiang Province is remarkable in the national context, and that it had already caught up with 79% of the provinces in 2017; we analyze the industrial characteristics of the wood products industry in Heilongjiang Province through the upstream and downstream degrees, the backward and forward correlation coefficients. The findings indicate that the average value of the downstream degree is 28.57% higher than the average value of the upstream degree in Heilongjiang Province, and the industry association mode has shifted from “demand-pull” to “supply-led”. Therefore, the timber industry in Heilongjiang Province has the capability to transform its resource advantage into a competitive edge across the entire industrial chain. Meanwhile, its sensitivity to economic fluctuations in various provinces is increasing significantly. However, there are still notable shortcomings: insufficient capacity to expand the terminal market and integrate the downstream segments of the industrial chain. Full article

In the context of global timber supply chains facing policy adjustments, resource fluctuations, and market uncertainties, this study focuses on the resilience of the Sino-Russian timber supply chain. A system dynamics (SD) model is developed to analyze the dynamic evolution of the key segments. By integrating the entropy weight–TOPSIS method, the research quantitatively assesses overall supply chain resilience by synthesizing data from four capability dimensions—Russian logistics and transportation capability, Russian primary wood processing capability, Sino-Russian timber import–export capability, and Heilongjiang furniture sales capability—over the 2017–2033 period. Results indicate a “first decline, then rise” trajectory for resilience, with a minimum normalized resilience index of 0.1549 recorded in 2021, followed by a gradual recovery and sustained strengthening thereafter. Among evaluated segments, Russian logistics demonstrates the strongest short-term shock resistance (36.2% reduction in minimum resilience), while Heilongjiang’s sales segment exhibits optimal long-term recoverability (the normalized resilience index increased by an average of 0.0363 units per year during the recovery phase). Based on these findings, a “short-term logistics enhancement–long-term demand-driven” strategy is proposed to improve resilience, providing actionable insights for the high-quality development of the Sino-Russian timber supply chain. Full article

The production of food with a naturally enriched protein content is a strategic response to the growing global demand for sustainable protein sources. Wood distillate (WD), a by-product of the pyrolysis of woody biomass, has previously been shown to increase the protein concentration and bioavailability in chickpea seeds. Here, we evaluated the effect of 0.5% (v/v) WD soil drenching on chickpea productivity, nutritional profile, and proteomic pattern. WD treatment significantly improved the yield by increasing plant biomass (+144%), number of pods and seeds (+148% and +147%), and seed size (diameter: +6%; weight: +25%). Nutritional analyses revealed elevated levels of soluble proteins (+15%), starch (+11%), fructose (+135%), and polyphenols (+14%) and a greater antioxidant capacity (25%), alongside a reduction in glucose content, albeit not statistically significant, suggesting an unchanged or even lowered glycemic index. Although their concentration decreased, Ca (−31%), K (−12%), P (−5%), and Zn (−14%) in WD-treated plants remained within normal ranges. To preliminary assess the quality and safety of the protein enrichment, a differential proteomic analysis was performed on coarse flours from individual seeds. Despite the higher protein content, the overall protein profiles of the WD-treated seeds showed limited variation, with only a few storage proteins, identified as legumin and vicilin-like isoforms, being differentially abundant. These findings indicate a general protein concentration increase without a major alteration in the proteoform composition or differential protein synthesis. Overall, WD emerged as a promising and sustainable biostimulant for chickpea cultivation, capable of enhancing both yield and nutritional value, while maintaining the proteomic integrity and, bona fide, food safety. Full article

The rising prevalence of antibiotic-resistant bacteria demands exploration of alternative antimicrobials. Antimicrobial peptides (AMPs) are a promising group of compounds naturally produced by microorganisms and could serve as potent agents against resistant pathogens. In this study, we evaluated the antimicrobial potential of the cell-free supernatant obtained from Pedobacter silvilitoris—a bacterium originally isolated from decomposing wood—and performed comprehensive genomic screening to uncover novel AMP-encoding genes. The supernatant showed strong inhibitory effects against a diverse selection of pathogens. Scanning electron microscopy (SEM) revealed extensive membrane damage, including pore formation in target bacterial cells, suggesting AMP-mediated activity. A genomic analysis identified 11 candidate AMP genes, named PS_AMP1 to PS_AMP11, based on the significant sequence similarity with known AMPs. Transcriptomic profiling further indicated that several candidates are expressed differentially between the logarithmic and stationary growth phases. Functional assays via gene cloning and peptide synthesis confirmed antimicrobial activity against both Gram-stain-negative and Gram-stain-positive bacteria, with PS_AMP11 emerging as the most effective candidate. Our findings demonstrate that AMPs derived from P. silvilitoris hold substantial promise as alternative antimicrobial agents. Nonetheless, additional structural optimizations may be necessary to fine-tune specificity and to reduce potential host toxicity before clinical deployment. Full article

Environmental concerns drive the search for sustainable organic alternatives in horticultural substrates. This review critically examines three agro-industry renewable byproducts—wood fiber, coffee silverskin, and brewer’s spent grain—as partial peat substitutes. We aimed to comprehensively analyze their origin, processing methods, current applications, and key physical, hydrological, and chemical properties relevant to horticultural use. In soilless culture, wood fiber can be used as a stand-alone substrate. When incorporated at 30–50% (v/v) in peat mixtures, it supports plant growth comparable to peat; however, higher proportions may restrict water and nutrient availability. Coffee silverskin demonstrates high water retention and nutrient content, but its inherent phytotoxicity requires pre-treatment (e.g., co-composting); at concentrations up to 20%, it shows promise for potted ornamental crops. Brewer’s spent grain is nutrient-rich but demands careful management due to its rapid decomposition and potential salinity issues; inclusion rates around 10% have shown beneficial effects. In conclusion, when used appropriately in blends, these bio-based byproducts represent viable alternatives to reduce peat dependence in vegetable and ornamental cultivation, contributing to more sustainable horticultural practices. Future research should optimize pre-treatment methods for coffee silverskin and brewer’s spent grain, investigate long-term stability in diverse cropping systems, and explore novel combinations with other organic waste streams to develop circular horticultural substrates. Full article

In the face of accelerating urbanization and the growing demand for environmentally responsible materials and designs, this study presents the development and implementation of a modular parklet demonstrator fabricated using dual-material 3D printing. The structure integrates polylactic acid (PLA) and wood-filled PLA (wood/PLA), combining the mechanical robustness of pure PLA in the core with the tactile and aesthetic appeal of wood-based biocomposite on the surface. The newly developed dual-nozzle 3D printing approach enabled precise spatial control over material distribution, optimizing both structural integrity and sustainability. A comprehensive evaluation was conducted for developed filaments and printed materials, including optical microscopy, coupled thermogravimetry analysis and Fourier Transform Infrared Spectroscopy (TG/FTIR), differential scanning calorimetry (DSC), and chemical and mechanical resistance testing. Results revealed distinct thermal behaviors and degradation pathways between filaments and printed parts composed of PLA and PLA/wood. The biocomposite exhibited slightly increased sensitivity to aggressive chemical environments and mechanical wear, dual-material prints maintained high thermal stability and interlayer adhesion. The 3D-printed demonstrator bench and stools were successfully deployed in public spaces as a functional urban intervention. This work demonstrates the feasibility and advantages of using biocomposite materials and dual-head 3D printing for the rapid, local, and sustainable fabrication of small-scale urban infrastructure. Full article

The land use, land-use change, and forestry (LULUCF) sector plays a crucial role in climate change mitigation; therefore, it is included in national and international climate change policies. However, renewable energy and bioeconomy development increase the demand for biomass for energy and material needs and challenge greenhouse gas (GHG) removal in LULUCF. Therefore, this study aims to analyze whether climate change mitigation and bioeconomy goals are compatible from an LULUCF perspective at the EU level. This study mainly covers the 2000–2020 period, looking at decoupling trends and LULUCF removal as well as estimating the substitution effect, which enables a broader view of the LULUCF GHG removal potential. The results reveal that decoupling is taking place at the EU level regarding economic growth and GHG, with a steady increase in renewables. The share of biomass in renewables is increasing at a slower pace, and the reduction in LULUCF GHG removal is proportionally lower compared to the pace of wood being harvested from forest land at the EU level. Still, biomass demand raises the pressure for LULUCF GHG removal, considering the sector itself is highly uncertain. Despite this, some possibilities to align climate and bioeconomy goals could remain, especially if the substitution effect is considered. Based on historical data, the estimated substitution effect is even higher (−367 mill. t CO₂ eq. on average in 2000–2020) than the sector’s removal (−300 mill. t CO₂ eq. on average in 2000–2020) and is dominated by material substitution (61%). Hence, LULUCF contributes to a reduction in GHG in other sectors, but it is still seldom acknowledged and not accounted for. Full article