Search Results (1,218)

This study investigates the pyrolysis of construction, renovation, and demolition (CRD) wood waste to produce biochar, with a focus on its robustness, scalability, and characterization for energy and environmental applications. Pyrolysis conditions, including the temperature, biomass residence time (BRT), and feedstock mass, were varied to evaluate their effects on biochar properties. High-temperature biochars (B800) showed the highest fixed carbon (FC) (87%) and thermostable fraction (TSF) (96%) and the lowest volatile carbon (VC) (9%), with a high carbon content (92%), a large BET surface area (300 m²/g), and a high micropore volume (0.146 cm³/g). However, the hydrogen (0.9%) and oxygen (2.2%) content, Van-Krevelen parameters (H/C: 0.1; O/C: 0.02), and biochar yield (21%) decreased with increasing temperature. Moderate-temperature biochars (B600) have balanced physicochemical properties and yields, making them suitable for adsorption applications. Methyl orange dye removal exceeded 90% under the optimal conditions, with B600 fitting well with the Freundlich isotherm model (R² = 0.97; 1/n = 0.5) and pseudo-second-order kinetic model (R² = 1). The study highlights biochar’s suitability for varied applications, emphasizing the need for scalability in CRD wood pyrolysis. Full article

Flash thermal pretreatment (FTT) is a promising technique for enhancing virgin olive oil (VOO) quality. This study investigated the effects of FTT, both cooling (15–25 °C) and heating (30–40 °C), on phenolics, tocopherols, fatty acid composition, oxidative stability (OSI), antioxidant capacity (AC), and volatile composition in VOOs from three Croatian varieties: Istarska Bjelica, Levantinka, and Oblica. A full factorial experimental design was used with two independent variables: treatment temperature and olive variety. Olive pastes were treated after crushing and before malaxation. Data were evaluated using ANOVA, partial least squares (PLS) regression, and response surface methodology (RSM). Istarska Bjelica showed the highest OSI improvement (+16%) mostly linked to elevated phenolic compounds. Levantinka exhibited moderate responses, with slight OSI and AC declines. Oblica was most sensitive to heating, showing OSI and AC reductions (up to 28%), despite increased oleocanthal and olacein. RSM identified optimal FTT temperatures for each variety: 18.9 °C (Istarska Bjelica), 15.4 °C (Levantinka), and 15.5 °C (Oblica). These findings support variety-specific FTT as an effective strategy to improve VOO functional and sensory quality. Full article

Glancing Angle Deposition (GLAD) has emerged as a versatile and powerful nanofabrication technique for developing next-generation gas sensors by enabling precise control over nanostructure geometry, porosity, and material composition. Through dynamic substrate tilting and rotation, GLAD facilitates the fabrication of highly porous, anisotropic nanostructures, such as aligned, tilted, zigzag, helical, and multilayered nanorods, with tunable surface area and diffusion pathways optimized for gas detection. This review provides a comprehensive synthesis of recent advances in GLAD-based gas sensor design, focusing on how structural engineering and material integration converge to enhance sensor performance. Key materials strategies include the construction of heterojunctions and core–shell architectures, controlled doping, and nanoparticle decoration using noble metals or metal oxides to amplify charge transfer, catalytic activity, and redox responsiveness. GLAD-fabricated nanostructures have been effectively deployed across multiple gas sensing modalities, including resistive, capacitive, piezoelectric, and optical platforms, where their high aspect ratios, tailored porosity, and defect-rich surfaces facilitate enhanced gas adsorption kinetics and efficient signal transduction. These devices exhibit high sensitivity and selectivity toward a range of analytes, including NO₂, CO, H₂S, and volatile organic compounds (VOCs), with detection limits often reaching the parts-per-billion level. Emerging innovations, such as photo-assisted sensing and integration with artificial intelligence for data analysis and pattern recognition, further extend the capabilities of GLAD-based systems for multifunctional, real-time, and adaptive sensing. Finally, current challenges and future research directions are discussed, emphasizing the promise of GLAD as a scalable platform for next-generation gas sensing technologies. Full article

Researchers increasingly agree that livestock farming is the leading cause of air pollution with ammonia (NH₃) gas. The existing research suggests that 30–80% of nitrogen is lost from slurry and liquid manure in the gaseous form of ammonia. Most studies have focused on environmental factors influencing ammonia volatilization and manure composition but not on controlling the moisture level on the surface of the excreta. Applying the principles of convective mass exchange, this study was undertaken to compare different types of organic covers that mitigate NH₃ emissions and offer recommendations on how to properly apply organic covers on the surface of manure. Data was obtained from research in laboratory conditions comparing well-known coatings (chopped straw) with less commonly used organic materials (peat) or waste generated in other industries (sawdust, hemp chaff). This research demonstrated that applying bio-coatings can reduce ammonia (NH₃) emissions at coating thicknesses of ≥5 cm for sawdust, ≥3 cm for peat, ≥10 cm for hemp chaff, and 8–12 cm for straw. These reductions are linked to the ability of the coatings to lower manure surface moisture evaporation, a key driver of ammonia volatilization, highlighting the role of surface moisture control in emission mitigation. Full article

Postharvest fungal diseases are a major cause of fruit spoilage and economic losses, particularly in perishable commodities like strawberries. In this study, a plant-derived Weissella paramesenteroides strain R2 was isolated from the mango fruit surface and evaluated for its antifungal potential. Dual-culture assays revealed the strong inhibitory activity of strain R2 against key postharvest pathogens, including Botrytis cinerea, Colletotrichum gloeosporioides, and Fusarium oxysporum. Notably, cell-free fermentation broth exhibited no antifungal activity, whereas the volatile organic compounds (VOCs) produced by R2 significantly suppressed fungal growth in sealed plate assays. GC-MS analysis identified 84 VOCs, with pyrazines as the dominant group. Three major compounds, 2,5-dimethylpyrazine, 2,4-di-tert-butylphenol, and 2-furanmethanol, were validated for their antifungal activity. The application of R2 VOCs in strawberry preservation significantly reduced disease incidence and severity during storage. These findings highlight W. paramesenteroides R2 as a promising, food-safe biocontrol agent for postharvest disease management via VOC-mediated mechanisms. Full article

Water scarcity is a growing global challenge, intensified by climate change, seawater intrusion, and pollution. While conventional desalination methods are energy-intensive, solar-driven interfacial evaporators offer a promising low-energy solution by leveraging solar energy for water evaporation, with the resulting steam condensed into purified water. Despite advancements, challenges persist, particularly in addressing volatile contaminants and biofouling, which can compromise long-term performance. The integration of photocatalysts into solar-driven interfacial evaporators has been proposed as a solution, enabling pollutant degradation and microbial inactivation while enhancing water transport and self-cleaning properties. This review critically assesses testing methodologies for solar-driven interfacial evaporators incorporating both photothermal and photocatalytic functions. While previous studies have examined materials and system design, the added complexity of photocatalysis necessitates new testing approaches. First, solar still setups are analyzed, particularly concentrating on the selection of materials and geometry for the transparent cover and water-collecting surfaces. Then, performance evaluation tests are discussed, with focus on the types of tested pollutants and analytical techniques. Finally, key challenges are presented, providing insights for future advancements in sustainable water purification. Full article

Volatile organic compounds (VOCs) are presently posing a rather considerable threat to both human health and environmental sustainability. Among these, n-butanol is commonly identified as bringing potential hazards to environmental integrity and individual health. This study presents the creation of a highly sensitive n-butanol gas sensor utilizing cobalt-doped zinc oxide (ZnO) derived from a metal–organic framework (MOF). A series of x-Co/MOF-ZnO (x = 1, 3, 5, 7 wt%) nanomaterials with varying Co ratios were generated using the homogeneous co-precipitation method and assessed for their gas-sensing performances under a low operating temperature (191 °C) and UV excitation (220 mW/cm²). These findings demonstrated that the 5-Co/MOF-ZnO sensor presented the highest oxygen vacancy (O_v) concentration and the largest specific surface area (SSA), representing the optimal reactivity, selectivity, and durability for n-butanol detection. Regarding the sensor’s response to 100 ppm n-butanol under UV excitation, it achieved a value of 1259.06, 9.80 times greater than that of pure MOF-ZnO (128.56) and 2.07 times higher than that in darkness (608.38). Additionally, under UV illumination, the sensor achieved a rapid response time (11 s) and recovery rate (23 s). As a strategy to transform the functionality of ZnO-based sensors for n-butanol gas detection, this study also investigated potential possible redox reactions occurring during the detection process. Full article

This study analyzes the aromatic profiles of kiwi-based fermented beverages, inoculated with varying proportions of milk kefir grains and incubated under different shaking rates. The experiments were designed using response surface methodology and three consecutive batch cultures were performed under each experimental condition. At the end of each fermentation, the grains were separated from the beverage and reused as the inoculum for fermenting fresh kiwi juice in the subsequent batch. Based on the results, together with the previously determined microbiological and chemical characteristics, two beverages were identified as having broader aromatic profiles, lower contents of sugars, ethanol, and acids, and high counts of lactic acid bacteria (LAB) and yeasts (>10⁶ CFU/mL). These beverages were produced under relatively low agitation rates (38 and 86 rpm) and high inoculum proportions (4.33% and 4.68% w/v) during the second and third batch cultures, respectively. Over 28 days of refrigerated storage, the pH values of both beverages remained relatively stable, and the LAB counts consistently exceeded 10⁶ CFU/mL. Yeast counts, along with the production of ethanol, glycerol, lactic acid, and acetic acid, increased slightly over time. In contrast, the concentrations of citric acid, quinic acid, total sugars, and acetic acid bacteria declined by day 28. Full article

There are discrepancies regarding the effectiveness of enhanced efficiency nitrogen (N) fertilizer (EENF) products on ammonia loss from unincorporated, surface applications of urea-based fertilizers. Soil properties and management practices may account for the differences in the performance of EENF. However, few studies have investigated the performance of urea- and urea ammonium nitrate (UAN)-based EENF on soils with contrasting properties. Controlled-environment incubation experiments were conducted on two soils with different properties to evaluate the efficacy of urea and UAN forms of EENF to minimize ammonia volatilization losses. The experiments were set up as a completely randomized design, with seven treatments replicated four times for 16 days. The N treatments, which were surface-applied at 134 kg N ha⁻¹, included untreated urea, untreated UAN, urea+ANVOL^TM (urease inhibitor product), UAN+ANVOL^TM, environmentally smart nitrogen (ESN^®), SUPERU^® (urease and nitrification inhibitor product), and urea+Excelis^® (urease and nitrification inhibitor product). In this study, urea was more susceptible to ammonia loss (24.12 and 26.49% of applied N) than UAN (5.24 and 16.17% of applied N), with lower ammonia volatility from soil with a pH of 5.8 when compared to 7.0. Urea-based EENF products performed better in soil with a pH of 5.8 compared to the soil with pH 7.0, except for ESN, which was not influenced by pH. In contrast, the UAN-based EENF was more effective in the high-pH soil (7.0). Across both soils, all EENFs reduced cumulative ammonia loss by 32–91% in urea and 27–70% in UAN, respectively, when compared to their untreated forms. The urea-based EENF formulations containing both nitrification and urease inhibitors were the least effective among the EENF types, performing particularly poorly in high-pH soil (pH 7.0). In conclusion, the efficacy of EENF is dependent on soil pH, N source, and the form of EENF. These findings underscore the importance of tailoring EENF applications to specific soil conditions and N sources to optimize N use efficiency (NUE), enhance economic returns for producers, and minimize environmental impacts. Full article

The co-disposal of municipal solid waste incineration fly ash (MSWI-FA) in cement kilns is an effective method for managing incineration by-products in China. However, the presence of heavy metals in MSWI-FA raises environmental concerns. This study analyzed the Cu, Zn, Cd, Pb, Cr, and Ni concentrations in MSWI-FA from 11 representative facilities across China and assessed the efficacy of a three-stage water washing process for Cl and heavy metal removal. The results revealed significant regional variations in heavy metal content that were strongly correlated with surface soil levels, with Zn, Pb, and Cu exhibiting the highest concentrations. Elemental correlations, such as Cu-Pb and Zn-Cd synergies and Cd-Ni antagonism, suggest common waste sources and temperature-dependent volatilization during incineration. The washing process (solid–liquid ratio = 1:10) achieved 97.1 ± 2.0% Cl removal, reducing residual Cl to 0.45 ± 0.32%, but demonstrated limited heavy metal elimination (10.28–19.38% efficiency), resulting in elevated concentrations (32.5–60.8% increase) due to 43.4 ± 9.2% mass loss. Notably, the washing effluents exceeded municipal wastewater discharge limits by up to 52-fold for Pb and 38-fold for Cd, underscoring the need for advanced effluent treatment. To mitigate environmental risks, the addition of washed MSWI-FA in cement kilns should be restricted to ≤0.5%, with Cd content prioritized in pre-disposal assessments. This study provides actionable insights for optimizing MSWI-FA co-processing while ensuring compliance with ecological safety standards. Full article

Termites pose significant threats to the structural integrity of embankments due to their nesting and tunneling behavior, which leads to internal voids, water leakage, or even dam failure. This review systematically classifies and evaluates current termite detection techniques in the context of embankment maintenance, focusing on physical sensing technologies and biological characteristic-based methods. Physical sensing methods enable non-invasive localization of subsurface anomalies, including ground-penetrating radar, acoustic detection, and electrical resistivity imaging. Biological characteristic-based methods, such as electronic noses, sniffer dogs, visual inspection, intelligent monitoring, and UAV-based image analysis, are capable of detecting volatile compounds and surface activity signs associated with termites. The review summarizes key principles, application scenarios, advantages, and limitations of each technique. It also highlights integrated multi-sensor frameworks and artificial intelligence algorithms as emerging solutions to enhance detection accuracy, adaptability, and automation. The findings suggest that future termite detection in embankments will rely on interdisciplinary integration and intelligent monitoring systems to support early warning, rapid response, and long-term structural resilience. This work provides a scientific foundation and practical reference for advancing termite management and embankment safety strategies. Full article

Membrane distillation (MD) has attracted increasing attention as a thermally driven separation process for water purification, desalination, and wastewater treatment. Its primary advantages include high rejection of non-volatile solutes, compatibility with low-grade or waste heat sources, and operation at ambient pressure. Despite these benefits, large-scale implementation remains limited due to the lack of membrane materials capable of withstanding harsh operating conditions and maintaining their hydrophobic character. Polymeric membranes have traditionally been used in MD applications; however, their limited thermal and chemical stability compromises long-term performance and reliability. In contrast, ceramic membranes are emerging as a promising alternative, offering superior mechanical strength, chemical resistance, and thermal stability. Nevertheless, their broader adoption in MD is hindered by several challenges, including high thermal conductivity, surface wettability, high fabrication costs, and limited scalability. This review provides a critical assessment of current developments, key opportunities, and ongoing challenges associated with the use of ceramic membranes in MD. Particular emphasis is placed on advances in surface modification techniques and the emerging applications in advanced MD configurations. Full article

This perspective explores the use of biochar, a carbon-rich material derived from biomass, as a sustainable solution for mitigating volatile organic compounds (VOCs) emitted during asphalt production and use. VOCs from asphalt contribute to ozone formation and harmful secondary organic aerosols (SOAs), which negatively impact air quality and public health. Biochar, with its high surface area and capacity to adsorb VOCs, provides an effective means of addressing these challenges. By tailoring biochar’s surface chemistry, it can efficiently capture VOCs, while also offering long-term carbon sequestration benefits. Additionally, biochar enhances the durability of asphalt, extending road lifespan and reducing maintenance needs, making it a promising material for sustainable infrastructure. Despite these promising benefits, several challenges remain. Variations in biochar properties, driven by differences in feedstock and production methods, can affect its performance in asphalt. Moreover, the integration of biochar into existing plant operations requires the further development of methods to streamline the process and ensure consistency in biochar’s quality and cost-effectiveness. Standardizing production methods and addressing logistical hurdles will be crucial for biochar’s widespread adoption. Research into improving its long-term stability in asphalt is also needed to ensure sustained efficacy over time. Overcoming these challenges will be essential for fully realizing biochar’s potential in sustainable infrastructure development Full article

Sweet cherry (Prunus avium L.), as a high-economic-value fruit with both nutritional and health functions, faces severely constrained plant growth due to underdeveloped root systems and suboptimal orchard site conditions. Plant growth-promoting rhizobacteria (PGPR) demonstrate application potential in regulating plant development and improving soil structure through the release of volatile organic compounds (VOCs). This study systematically evaluated the effects of VOCs from three PGPR strains—Pantoea ananatis D1-28, Burkholderia sp. D4-24, and Burkholderia territorii D4-36—on cherry root development and rhizosphere microbial communities. The results indicate that when D1-28 and D4-24 strains were at 10³ cfu·mL⁻¹ and D4-36 was at 10⁵ CFU·mL⁻¹, their VOCs exhibited optimal growth-promoting effects. Compared with the control group, significant improvements were observed in cherry seedling parameters, including plant height, total biomass, root length, root surface area, and root volume. The VOCs from these strains synergistically promoted plant growth by regulating auxin synthesis pathways in cherry roots while enhancing the relative abundance of beneficial rhizosphere microorganisms. This study establishes the strain-concentration–effect relationship, providing a theoretical foundation to optimize soil microbial environments and promote cherry root development using PGPR. Full article

This study employed cellulase-assisted hydrodistillation (cellulase-HD) to extract volatile oils from Wurfbainia villosa (Lour.) Škorničk. & A.D.Poulsen (W. villosa) leaves, with process optimization conducted via the response surface methodology (RSM). The optimized extraction parameters were as follows: enzyme dosage 2.2%, enzymatic hydrolysis temperature 49 °C, hydrolysis duration 73 min, and material/liquid ratio (1:10.7 mg/mL). Under these optimal conditions, the volatile oil yield reached 0.772%, representing a 31.29% increase compared to conventional hydrodistillation (HD). GC-MS analysis identified 54 and 49 volatile compounds in cellulase-HD and HD extracts, respectively, with 39 shared components. The cellulase-HD extract was predominantly composed of γ-terpinene (14.981%), limonene (13.352%), β-phellandrene (10.634%), 4-terpineol (10.145%), and α-terpineol (8.085%). In contrast, the HD extract showed higher contents of β-phellandrene (41.881%), followed by β-myrcene (8.656%) and limonene (8.444%). Notably, cellulase pretreatment significantly increased the yield of oxygenated compounds. Orthogonal partial least squares discriminant analysis (OPLS-DA) revealed substantial compositional differences between the two extraction methods, with key differential components including fenchol, borneol, and γ-elemene. Antioxidant activity assessment demonstrated superior free radical scavenging capacity in cellulase-HD extracts. Structure–activity relationship analysis identified seven compounds with DPPH radical scavenging rates >50%, particularly, epi-bicyclosesquiphellandrene (71.51%) and γ-elemene (78.91%). Furthermore, thirteen components, including isopinocamphone (66.58%) and α-terpineol (66.95%), exhibited ABTS radical scavenging rates above 50%. This study provides theoretical and technical foundations for the extraction and functional development of volatile oils from W. villosa leaves. Full article