Search Results (104)

The realization of desirable vertical phase separation, enabled by sequential processing that allows for the separate deposition and targeted regulation of donor and acceptor components to construct a well-defined donor–acceptor (D-A) interface, serves as a pivotal factor governing the performance of layer-by-layer organic photovoltaics (LOPVs). This study explores the utility of 4-trifluoromethyl benzoic anhydride (4-TBA), a multifunctional benzene-based solid additive, in the PM6/L8-BO LOPV system, focusing on its role in regulating the vertical phase separation of donor-PM6 and acceptor-L8-BO components to form a well-structured D-A interface. To this end, 4-TBA is doped into the donor-PM6 layer, acceptor-L8-BO layer, or both layers, and its effects on device performance are systematically characterized. The results show that simultaneous doping of 0.05 wt% 4-TBA in both PM6 and L8-BO layers yields the optimal performance, with the power conversion efficiency reaching 18.49% compared to the pristine device with a PCE of 17.05%, and this is accompanied by a significant increase in short-circuit current density from 24.71 mA/cm² to 26.65 mA/cm². Additionally, the optimal devices exhibit better stability, as unencapsulated devices retain 76% of their initial PCE after 175 h under ambient conditions compared to 73% for the devices without 4-TBA doping. Essentially, solid additive 4-TBA modulates molecular packing via its interaction between the donor and acceptor molecules and enhances molecular aggregation and hydrophobicity, thereby suppressing bimolecular and trap-assisted recombination, reducing trap density of states, and forming favorable interpenetrating networks. This work validates 4-TBA, which contains benzene rings and other functional groups, as a versatile additive suitable for the LOPV system and offers a generalizable strategy for optimizing LOPV performance by leveraging multifunctional solid additives. Full article

In response to the problem of high energy consumption caused by inefficient temperature control of energy storage aggregates in traditional building envelope structures, this study developed a decanoic acid–stearic acid composite phase-change ceramsite aggregate to improve the thermal performance of buildings and promote the utilization of solid waste resources. Based on the theory of minimum melting, composite phase-change materials were screened through thermodynamic models. The capric acid–stearic acid (CA-SA) melt system, whose theoretical phase-transition temperature falls within the building indoor thermal environment control range (18–26 °C), was preferred as the experimental object of this study, and its characteristics were verified through step cooling curves and thermal property tests. Subsequently, the ceramsite adsorption process was optimized, and the encapsulation process was studied. Finally, the encapsulation performance was evaluated through thermal stability and stirring crushing rate tests. The results showed that the phase-transition temperature of the decanoic acid–stearic acid melt system was 24.83 °C, which accurately matched the indoor thermal environment control requirements. The ceramsite particles treated by a physical vibrating screen can reach equilibrium after 30 min of adsorption at room temperature and pressure, which is both efficient and economical. The encapsulation layer of sludge biochar cement slurry with a water–cement ratio of 0.5 and a biochar content of 3% has both thermal conductivity and encapsulation integrity. The thermal stability test showed that the percentage of leakage of sludge biochar cement slurry and epoxy resin encapsulated aggregates was 0%, and the thermal stability rating was “very stable”. However, the percentage of leakage of unencapsulated and spray-coated encapsulated aggregates was as high as 193% and 40%, respectively. The results of the mixing and crushing rate test show that although the mixing and crushing rate of sludge biochar cement slurry encapsulation is slightly higher, its production cost is much lower than that of epoxy resin, and it is also environmentally friendly. This study improves the thermal performance of buildings by using composite phase-change ceramsite aggregate, and simultaneously realizes the resource utilization of sludge biochar, providing a solution for building energy saving and efficiency that combines environmental and engineering value. Full article

The present study demonstrates encapsulation of Coriandrum sativum essential oil in chitosan nanoemulsion and its effectiveness against fungal infestation and fumonisin B₁ (FB₁)- and B₂ (FB₂)-mediated biodeterioration of stored rice samples. Mycoflora analysis of different rice varieties revealed fungal occurrence and Fusarium proliferatum-BRC-R2 as the most toxigenic strain with highest FB₁- and FB₂-producing potentiality. GC-MS analysis of Coriandrum sativum essential oil (CEO) revealed linalool as the major component. The CEO-loaded chitosan nanoemulsion (Ne-CEO) was characterized by Scanning electron microscopy, X-ray diffractometry, Dynamic light scattering, and Fourier transform infrared spectroscopy. The Ne-CEO showed better antifungal and anti-fumonisin effectiveness as compared to unencapsulated CEO. The antifungal mechanism was associated with reduced ergosterol content, efflux of ions, proteins, nucleic acids, and destruction of plasma membrane integrity. The in silico interaction of linalool with Fum 1 protein confirmed the molecular action of anti-fumonisin activity. Additionally, the Ne-CEO displayed improved antioxidant activity and promising antifungal and anti-fumonisin activity during in situ investigation in rice samples (Gobindobhog variety) along with inhibition of the deterioration of carbohydrate, protein content, and lipid peroxidation without altering organoleptic properties and seed germination potentiality. Overall, the investigation strengthens the potentiality of Ne-CEO as a novel preservative of stored food commodities. Full article

Abdominal aortic aneurysm (AAA) is a dilatation of the distal aorta to a diameter of 50% or more of its normal size of about 2 cm. Risk of aortic rupture can be nearly eliminated with either open surgery or endovascular repair. Procedural risks limit the value of these interventions unless the diameter of the aneurysm has reached a critical threshold (established as 5.5 cm in men or 5.0 cm in women). Thus, patients are monitored until this threshold is reached. Approximately 80% of small AAA will grow and exceed the threshold, providing a therapeutic window for altering this natural history and reducing the risk of rupture. Previous work in our lab has utilized adipose-derived mesenchymal stem cells (ASCs) to treat AAA in vivo, preserving elastic fibers and slowing aneurysm expansion. This work sought to create a delivery system for therapeutic extracellular vesicles (ASC-EVs) secreted by ASCs. Our delivery system incorporated the biocompatibility of regenerated silk fibroin (RSF), the magnetic moveability of iron oxide nanoparticles (IONPs), and the regenerative nature of ASC-EVs to create silk-iron packaged extracellular vesicles (SIPEs). Using this system, we tested the ability to magnetically localize the SIPEs and release their encapsulated ASC-EVs to exert their regenerative effects in vitro. We were successful in magnetically localizing the SIPEs in vitro and silk-iron microparticles (SIMPs) in vivo and in detecting their releasates via flow cytometry and cellular uptake assays. However, while their releasates were detected, their biological effects were diminished compared to unencapsulated controls. Thus, additional optimization related to loading efficiency is needed. Full article

Perovskite materials have garnered significant attention in both fundamental research and practical applications owing to their exceptional light absorption coefficients, low fabrication costs, and inherent advantages for thin-film and flexible device fabrication. Nevertheless, interface defects within perovskite films induce detrimental non-radiative carrier recombination and pronounced hysteresis effects, which collectively impose substantial limitations on the photovoltaic performance and long-term operational stability of perovskite solar cells (PSCs). Conventional passivation strategies, despite their demonstrated efficacy in mitigating interface defects, often inadvertently introduce secondary defects in originally defect-free regions, thereby restricting the extent of device performance improvement. To overcome this critical limitation, we have developed a precision defect passivation methodology that employs a targeted two-step immersion–cleaning process, achieving selective defect passivation while concomitantly eliminating residual passivating agents. This approach effectively prevents the formation of new defects in unaffected regions of the perovskite films, and the resultant PSC possesses a power conversion efficiency (PCE) of 21.08%, accompanied by a substantial mitigation of hysteresis behavior. Furthermore, unencapsulated devices demonstrate remarkable stability, retaining over 81% of their initial efficiency after 20 days of atmospheric storage under 50% relative humidity, which underscores the effectiveness of our passivation strategy in simultaneously enhancing both device performance and operational stability. Full article

To unlock the potential value of the emulsified by-product from the aqueous enzymatic extraction (AEE) of Camellia oleifera seed oil, this study introduced an innovative approach for its food industrial application. We applied spray-drying microencapsulation technology to convert the emulsion-phase (EP) by-product into value-added microcapsules (EPM). The properties of EPM were systematically compared with those of microcapsules derived from the oil phase (OPM). The encapsulation efficiencies of EPM and OPM were 83.94% and 86.53%, respectively. Scanning electron microscopy revealed the formation of irregular spheroids with smooth surfaces and intact structures, with EPM exhibiting superior particle uniformity (D₅₀ = 1.11 μm) compared to OPM (D₅₀ = 2.30 μm). Fourier-transform infrared spectroscopy confirmed the successful encapsulation of EP. Differential scanning calorimetry indicated good thermal stability of the microcapsules, and the oxidative stability of EPM (24.75 h) was 9.2 times higher than that of the unencapsulated EP and 13.15 h longer than that of OPM. Lipidomic analysis using LC-MS/MS identified 477 lipid species across five subclasses—glycerolipids, glycerophospholipids, fatty acids, prenol lipids, and sphingolipids—revealing distinct lipid profiles between EPM and OPM. This microencapsulation strategy offers a sustainable approach to valorize aqueous enzymatic extraction by-products, with promising applications in functional foods and nutraceuticals, thereby enhancing the economic and environmental sustainability of Camellia oleifera seed oil processing. Full article

Spermatogenesis in teleosts is essential for reproductive function; however, it varies considerably among species. The testis of the viviparous molly fish (Poecilia sphenops) was examined using both ultrastructural and immunohistochemical methods. The testis displays a restricted lobular type, where germ cells develop synchronously within Sertoli cell-forming cysts. Transmission electron microscopy (TEM) revealed all stages of spermatogenesis. Mature sperm are at the apex of the cysts and migrate toward the sperm ducts. Sperm duct epithelium is lined by cuboidal cells joined by tight junctions, with apical cilia and desmosomal complexes contributing to transport and structural integrity. The sperm ducts showed strong Periodic Acid–Schiff (PAS)-positive expression among negative stained spermatocysts. Centrally, a cavity serves as a storage area for spermatozoa that are organized into unencapsulated bundles known as spermatozeugmata. Sertoli cells exhibited extended cytoplasmic processes that supported developing germ cells, whereas Leydig cells occupied the interstitial tissue, contributing to hormonal regulation. Immunohistochemical labeling demonstrated strong vimentin expression in Sertoli cells and telocytes, indicating their mesenchymal origin and structural role. Calretinin expression was confined to Leydig cells and certain ductal epithelial cells, supporting its use as a marker for steroidogenic and secretory functions. These findings provide new insights into the testicular specialization of P. sphenops, highlighting key somatic–germ cell interactions, ductal adaptations, and marker expression patterns that underlie male reproductive success in viviparous fish. Full article

Background/Objectives: This study presents the development and characterization of a novel thermoresponsive hydrogel composed of hyaluronic acid (HA), poloxamer 407, cannabidiol (CBD), and colloidal silver (Ag), designed for topical antimicrobial therapy. Methods: The Ag-CBD complex was first synthesized and subsequently incorporated into a HA–poloxamer gel matrix to produce a stable, sprayable formulation with suitable physicochemical properties for dermal applications. Results: The HA-Ag-CBD hybrid gel exhibited a physiological pH, a gelation temperature compatible with skin surface conditions, and favorable rheological behavior, including thixotropy and shear thinning—critical for uniform application and retention under dynamic conditions. Release studies confirmed a sustained delivery profile, supporting prolonged local activity of CBD and colloidal Ag. Antimicrobial assays demonstrated that the HA-Ag-CBD hybrid gel retained potent activity against Staphylococcus aureus and Candida albicans, with minimum inhibitory and bactericidal concentrations (MIC/MBC) statistically comparable to those of the unencapsulated Ag-CBD complex. Against E. coli, the HA-Ag-CBD hydrogel exhibited primarily bacteriostatic activity, with a low MIC (9.24 μg/mL) but a substantially higher MBC (387.35 μg/mL), consistent with the intrinsic structural resistance of Gram-negative bacteria. In contrast, bactericidal activity was more pronounced against Gram-positive strains, reflecting differential susceptibility related to bacterial envelope properties. CBD consistently demonstrated superior antimicrobial efficacy to colloidal Ag, while the Ag-CBD combination produced slightly enhanced, mainly additive effects, likely due to complementary membrane disruption and intracellular Ag⁺ ion activity. Cytotoxicity assays on normal human dermal fibroblasts confirmed that the HA-Ag-CBD hybrid gel maintained >70% cell viability at therapeutically relevant concentrations, in accordance with ISO 10993-5:2009 guidelines, and effectively mitigated the inherent cytotoxicity of the Ag-CBD complex. Conclusions: The HA-Ag-CBD hybrid gel demonstrates strong potential as a biocompatible, multifunctional topical formulation for the treatment of infected wounds and skin lesions. Future work will focus on in vivo evaluation, assessment of skin permeation, and further development to support translational applications. Full article

Inverted (p-i-n) CsPbI_xBr_3−x (x = 0~3) perovskite solar cells (PSCs) are of growing interest due to their excellent thermal stability and optoelectronic performance. However, they suffer from severe energy level mismatch and significant interfacial energy losses at the bottom hole transport layers (HTLs). Herein, we propose a strategy to simultaneously enhance the crystallinity of CsPbI_2.85Br_0.15 and facilitate hole extraction at the HTL/CsPbI_2.85Br_0.15 interface by incorporating semiconducting single-walled carbon nanotubes (SWCNTs) onto [2-(3,6-dimethoxy-9H-carbazol-9-yl)ethyl] phosphonic acid (MeO-2PACz) HTL. The unique electrical properties of SWCNTs enable the MeO-2PACz/SWCNT HTL to achieve high conductivity, optimal energy level alignment, and an adaptable surface. Consequently, the defect density is reduced, hole extraction is accelerated, and interfacial charge recombination is effectively suppressed. As a result, these synergistic benefits boost the power conversion efficiency (PCE) from 15.74% to 18.78%. Moreover, unencapsulated devices retained 92.35% of their initial PCE after 150 h of storage in ambient air and 89.03% after accelerated aging at 85 °C for 10 h. These findings highlight the strong potential of SWCNTs as an effective interlayer for inverted CsPbI_2.85Br_0.15 PSCs and provide a promising strategy for designing high-performance HTLs by integrating SWCNTs with self-assembled monolayers (SAMs). Full article

Low fertility limits reproductive efficiency in cattle. This study was conducted with multiparous Brangus cows receiving dietary supplementation with or without L-citrulline [Cit; an immediate precursor of L-arginine (Arg)]. During the entire experimental period, cows grazed green pasture and had free access to drinking water and mineral blocks. One hundred and seven (107) cows were assigned randomly to one of three treatment groups: dried distillers grains with solubles (DDGS) without Cit supplement (n = 36); DDGS top-dressed with rumen-protected Cit product (RPAA; n = 36); or unprotected Cit product (RUAA; n = 35). After 2 months of lactation, all cows were synchronized to estrus and were bred once via artificial insemination. From Day 1 to Day 60 of gestation, cows were individually fed once daily 0.84 kg of a supplement (DDGS; control), 0.56 kg of DDGS plus 0.28 kg of RUAA (containing 0.07 kg of unencapsulated Cit), or 0.56 kg of DDGS plus 0.28 kg of RPAA (containing 0.07 kg of rumen-protected Cit). The supplemental dose of Cit was equivalent to 0.5% of the estimated daily intake of 14 kg dry matter from pasture. On Days 40 and 60 of gestation, ultrasound was used to determine pregnancy rates. Each pregnant cow had a single conceptus. On Day 60 of gestation, blood samples were obtained from the jugular vein. All cows grazed normally and appeared healthy. Birth rates for live-born calves were 22% and 35% in cows receiving DDGS alone and Cit supplementation, respectively (p < 0.05). The beneficial effect of Cit was associated with increases in concentrations of Cit (+19%), Arg (+20%), ornithine (+19%), proline (+17%), and insulin (+82%) but decreases in concentrations of ammonia (–14%) in maternal plasma (p < 0.05). Thus, dietary supplementation with Cit is a simple, novel, and cost-effective nutritional method to increase the reproductive efficiency of lactating beef cows. Full article

To investigate the impact of microencapsulation on the volatile organic compounds (VOCs) in Zanthoxylum oil, this study compared unencapsulated Zanthoxylum oil (ZO) with microencapsulated Zanthoxylum oil (MZO) using physicochemical analysis, sensory evaluation, and molecular sensory analysis. Sensory evaluation revealed significant differences in aroma attributes between ZO and MZO, whereas no notable differences were observed in numbing intensity or overall acceptability. Colorimetric analysis indicated significant distinctions between the two samples. Electronic nose (E-nose) analysis demonstrated a reduction in overall aroma intensity for MZO compared to ZO. Gas chromatography–mass spectrometry (GC–MS) identified 43 VOCs, including 22 compounds present in both samples, accounting for 46.8% of the total. Terpenes represented the predominant class in both ZO (69.7%) and MZO (68.2%). Comprehensive analysis based on odor activity value (OAV) and variable importance in projection (VIP) identified nine volatile compounds as key aroma contributors. Gas chromatography–ion mobility spectrometry (GC–IMS) detected 90 the volatile organic compounds (VOCs), with esters (30.38%) and heterocyclic compounds (10.42%) predominating in ZO, while esters (29.08%) and alcohols (26.12%) were predominant in MZO. Compared to ZO, MZO exhibited increased levels of alcohols (from 12.04% to 26.12%) and terpenes (from 1.39% to 3.53%), but decreased levels of acids (from 5.77% to 2.72%) and aldehydes (from 10.29% to 4.62%). This approach provides a comprehensive assessment of flavor quality before and after microencapsulation, offers a scientific basis for quality control, and facilitates the development and utilization of Zanthoxylum oil resources. Full article

Metal halide perovskites have appeared as a promising semiconductor for high-efficiency and low-cost photovoltaic technologies. However, their performance and long-term stability are dramatically constrained by defects at the surface and grain boundaries of polycrystalline perovskite films formed during the processing. Herein, we propose a defect-targeted passivation strategy using 2-chlorocinnamic acid (2-Cl) to simultaneously enhance the efficiency and stability of perovskite solar cells (PSCs). The crystallization kinetics, film morphology, and optical and electronic properties of the used formamidinium–cesium lead halide (FA_0.85Cs_0.15Pb(I_0.95Br_0.05)₃, FACs) absorber were modulated and systematically investigated by various characterizations. Mechanistically, the carbonyl group in 2-Cl coordinates with undercoordinated Pb²⁺ ions, while the chlorine atom forms Pb–Cl bonds, effectively passivating the surface and interfacial defects. The optimized FACs perovskite film was incorporated into inverted (p-i-n) PSCs with a typical architecture of ITO/NiO_x/PTAA/Al₂O₃/FACs/PEAI/PCBM/BCP/Ag. The optimal device delivers a champion power conversion efficiency (PCE) of 22.58% with an open-circuit voltage of 1.14 V and a fill factor of 82.8%. Furthermore, the unencapsulated devices retain 90% of their initial efficiency after storage in ambient air for 30 days and 83% of their original PCE after stress under 1 sun illumination with maximum power point tracking at 50 °C in a N₂ environment, demonstrating the practical potential of dual-site molecular passivation for durable perovskite photovoltaics. Full article

Ferulic acid (FA) exhibits beneficial properties in ulcerative colitis (UC) pathogenesis, while sensitivity to the environment and enzymes limits its use in UC therapy. Therefore, this study aims to develop a colon-targeted nanocomplex delivery system using FA and investigate its protective effects and underlying regulatory mechanisms in UC mice. A novel Zein/FA–pectin (PEC)/chitosan (CS) nanocomplex was successfully fabricated in this study. Through systematic adjustment of the PEC/CS-to-Zein/FA ratio, optimal encapsulation efficiency (60.1%) and loading capacity (26.2%) were achieved. The characterized data indicated that hydrogen bonds, electrostatic interactions, and hydrophobic forces were the main driving forces maintaining the formation of the nanocomplexes, accompanied by alterations in the secondary structure of Zein. The Zein/FA–PEC/CS nanocomplexes demonstrated excellent thermal/storage particle size stability and exhibited both protective and sustained-release effects of FA during simulated gastrointestinal digestion. Furthermore, the results demonstrated that the nanocomplexes potentially alleviate UC by regulating inflammatory cytokines, oxidative stress, and gut microbiota. Compared to unencapsulated FA, the nanocomplexes have a better effect on alleviating UC symptoms. In summary, Zein/FA–PEC/CS nanocomplexes have promising prospects in alleviating colitis in UC mice. Full article

Background/Objectives: While adenovirus (Ad) therapies have been proven to be effective in local administration, systemic Ad treatments have shown limited success due to pre-existing antibodies in the human blood that neutralize the virus. We developed a liposome coating procedure that protects the Ad from pre-existing neutralizing antibodies in human blood. To assess the in vivo stability of the liposomes, the present study used a novel in vivo method to quantitatively assess the protective capabilities of liposome-encapsulated Ad (DfAd) from neutralizing antibodies. Methods: The assay systemically administers DfAd with a green fluorescent protein transgene (DfAd-GFP) into pre-immunized mice and allows it to circulate in the presence of neutralizing antibodies; the infected blood is extracted and used to transduce HEK293 cells, which emits fluorescence in the presence of protected, un-neutralized Ad. Results: The PEGylated liposome formulation provides 12× protection in vivo relative to unencapsulated Ads. In vitro optimization of the liposome coating reveals a strong correlation between the structural stability of liposomes and protection against anti-Ad neutralizing antibodies, where DSPE-PEG2000-carboxylic acid (DSPE-PEG2000-CA) is a critical component for liposome stability and increasing protection against antibody neutralization of the encapsulated Ad. Conclusions: The findings in the present study confirm that the DfAd liposome can protect against neutralizing antibodies in blood circulation. The novel in vivo assay for liposome protection against neutralizing antibodies and in vitro experiments in the present study provide new tools and insights toward designing liposome–Ad complexes for the systemic treatment of cancer. Full article

Background/Objectives: The limited permeability of the blood–brain barrier (BBB) to biotherapeutics is a major challenge in the treatment of brain tumors. The nose-to-brain (N2B) delivery approach, which bypasses the BBB, offers a promising alternative way to treat these tumors. The aim of this work was to develop PLGA nanoparticles for N2B delivery of biodrugs using trastuzumab (TZB) as a paradigm. Methods: An in vitro model was used to evaluate the ability of PLGA nanoparticles to enhance passage through the nasal epithelium. We also compared the passage of loaded TZB versus unencapsulated TZB across an in vitro BBB model simulating systemic administration of TZB. TZB-loaded PLGA nanoparticles (NP-TZBs) were prepared using a double emulsion method followed by solvent evaporation and characterized for various properties, including particle size, polydispersity index, zeta potential, morphology, encapsulation efficiency, and drug loading capacity and release kinetics. TZB functionality was assessed after release from NP or passage through an in vitro barrier model. The permeability of TZB and NP-TZBs through in vitro models of nasal epithelium and BBB was investigated. Results: NP-TZBs exhibited an average size of about 200 nm with a polydispersity index of less than 20%, neutral charge, and a loading efficiency of 67%. Transmission electron microscopy revealed spherical nanoparticles with a smooth surface. Importantly, the TZB released from the nanoparticles retained all of its physicochemical properties and functionality. We observed that the NP-TZB formulation results in at least a nine-fold increase in TZB permeability across the nasal epithelium 24 h post-exposure, depending on the exposure conditions, but shows no significant improvement across the BBB model. The TZB released in the basal compartment is fully functional and able to recognize HER2 expressed on the surface of breast tumor BT474 cells. Conclusions: Using compounds already validated for clinical use, we were able to develop a formulation that allowed efficient passage of TZB across an in vitro nasal epithelial model. In contrast, no passage was observed across the BBB, supporting the notion of the superiority of the nose–brain route over systemic injection for in vivo delivery of TZB to the central nervous system. Full article