Search Results (136)

Background: The emergence and spread of antimicrobial-resistant bacteria (ARB) has become an urgent global concern as a silent pandemic. When taking measures to reduce the impact of antimicrobial resistance (AMR) on the environment, it is important to consider appropriate treatment of wastewater from medical facilities. Methods: In this study, a continuous-flow wastewater treatment system using ozone and ultraviolet light, which has excellent inactivation effects, was implemented in a hospital in an urban area of Japan. Results: The results showed that 99% (2 log₁₀) of Gram-negative rods and more than 99.99% (>99.99%) of ARB comprising ESBL-producing Enterobacterales were reduced by ozone treatment from the first day after treatment, and ultraviolet light-emitting diode (UV-LED) irradiation after ozone treatment; UV-LED irradiation after ozonation further inactivated the bacteria to below the detection limit. Inactivation effects were maintained throughout the treatment period in this study. Metagenomic analysis showed that the removal of these microorganisms at the DNA level tended to be gradual in ozone treatment; however, the treated water after ozone/UV-LED treatment showed a 2 log₁₀ (>99%) removal rate at the end of the treatment. The residual antimicrobials in the effluent were benzylpenicillin, cefpodoxime, ciprofloxacin, levofloxacin, azithromycin, clarithromycin, doxycycline, minocycline, and vancomycin, which were removed by ozone treatment on day 1. In contrast, the removal of ampicillin and cefdinir ranged from 19% to 64% even when combined with UV-LED treatment. Conclusions: Our findings will help to reduce the discharge of ARB and antimicrobials into rivers and maintain the safety of aquatic environments. Full article

Irradiation with ultraviolet light-emitting diodes (UV-LEDs) represents a promising method for viral inactivation, but a detailed understanding of the wavelength-dependent action spectra remains limited, particularly across different viral components. In this study, we established standardized UV action spectra for infectivity reduction in pathogenic viruses using a system equipped with interchangeable LEDs at 13 different peak wavelengths (250–365 nm). The reduction in viral infectivity induced by UV-LED exposure was strongly related to viral genome damage, whereas no significant degradation of viral structural proteins was detected. Peak virucidal efficiency was observed at 267–270 nm across all tested viruses, representing a slight shift from the traditionally expected 260 nm nucleic acid absorption peak. Enveloped RNA viruses, including influenza A virus, respiratory syncytial virus, and coronavirus, exhibited greater UV sensitivity than nonenveloped viruses such as feline calicivirus and adenovirus. These observations indicate that structural characteristics, such as the presence of an envelope and genome organization, influence UV susceptibility. The wavelength-specific action spectra established in this study provide critical data for optimizing UV-LED disinfection systems to achieve efficient viral inactivation while minimizing energy consumption in healthcare, food safety, and environmental sanitation. Full article

This study presents a novel approach to mitigate electron overflow in deep ultraviolet (UV) AlGaN light-emitting diodes (LEDs) by integrating engineered quantum barriers (QBs) with a concave shape and an optimized AlGaN superlattice (SL) electron blocking layer (EBL). The concave QBs reduce electron leakage by lowering the electron thermal velocity and mean free path, enhancing electron capture in the active region. The SL EBL further reduces electron overflow without compromising hole transport. At a wavelength of ~253.7 nm, the proposed LED demonstrates a 2.67× improvement in internal quantum efficiency (IQE) and a 2.64× increase in output power at 150 mA injection, with electron leakage reduced by ~4 orders of magnitude compared to conventional LEDs. The efficiency droop is found to be just 2.32%. Full article

Ultraviolet (UV) radiation can be used to inactivate microorganisms, with upper-room UV germicidal irradiation (UR-UVGI) representing a promising approach. This study investigated the inactivation of the airborne surrogate virus Phi6 by a UR-UVGI system based on light-emitting diodes (LEDs) in a realistic test setup. Two test scenarios were used, one with continuous Phi6 release, simulating a source located in the room and leading to a dynamic equilibrium, and the second simulating a situation in which the source has left the room and an exponential decay is evaluated. The “Incremental Evaluation Model” was adapted and used to evaluate the dynamic equilibrium measurement. At a position in the breathing direction 5 m away from the Phi6 source, the loss coefficient (air exchange rate) was 25 h⁻¹ in the first scenario and 30 h⁻¹ in the second. These results show that UR-UVGI systems can effectively inactivate microorganisms. However, at 1 m distance from the Phi6 source perpendicular to the breathing direction, only minimal inactivation was observed due to short-circuit airflow. At this position, the loss coefficient was <2 h⁻¹ in the first scenario and 17 h⁻¹ in the second scenario, indicating that short-circuit airflows can only be detected by dynamic equilibrium measurements. Full article

Pomegranates are rich in nutrients and classified among ready-to-eat fruits and vegetables. Although this ready-to-eat produce offers convenience, it presents risks associated with pathogenic microorganisms, highlighting the need for pre-sale disinfection. Ultraviolet light-emitting diodes (UV-LEDs) constitute an innovative non-thermal processing technology for food products, offering reduced heat generation and lower energy consumption compared to traditional ultraviolet (UV) irradiation methods. This study analyzed the effects of UV-LED technology on pomegranate seed quality over 0 to 5 days of storage. The results demonstrated significant increases in anthocyanins, polyphenols, ascorbic acid, and the antioxidant capacity in pomegranate following treatment, peaking on day 3. In contrast, the control group showed declining trends. After treatment, the aerobic mesophilic counts and counts of mold and yeast levels during storage measured between 2.73–3.23 log CFU/g and 2.56–3.29 log CFU/g, respectively, significantly lower than the control group. Non-targeted metabolomic analysis showed that UV-LED treatment prompted modifications in the biosynthetic pathways of flavonoids, flavonols, and anthocyanins. The expression of peonidin-3-O-rutinoside chloride increased by 46.46-fold within the anthocyanin biosynthesis pathway. In conclusion, UV-LED treatment represents a potential approach to the disinfection of ready-to-eat fruits and vegetables. Full article

Hepatitis A viral outbreaks continue to occur. It can be transmitted through aerosolized droplets and thus can contaminate surfaces and the environment. Ultraviolet light emitting diode (UV-C LED) systems are used for inactivation of microbes, though research is needed to determine optimal doses for aerosolized HAV inactivation. This study evaluates the UV-C LED doses for the inactivation of aerosolized hepatitis A virus (HAV) deposited on stainless-steel and glass discs. HAV was aseptically deposited onto stainless-steel or glass discs (1.27 cm diameter) using a nebulizer within a chamber followed by treatments for up to 1.5 min with 255 nm (surface dose = 0–76.5 mJ/cm²) or 279 nm (surface dose = 0–8.1 mJ/cm²) UV-C LED. Plaque assays were used to enumerate infectious titers of recovered viruses and data from three replicates were statistically analyzed. The calculated linear D₁₀-value (UV-C dose for a 1-log reduction in aerosolized deposits) for HAV by 255 nm UV-C LED was 47.39 ± 7.40 and 40.0 ± 2.94 mJ/cm² (R² = 0.94 and 0.91) and using 279 nm UV-C LED were 6.60 ± 0.27 and 5.57 ± 0.74 mJ/cm² (R² = 0.98 and 0.94) on stainless-steel and glass discs, respectively. The non-linear Weibull model showed δ (dose needed for a 1-log reduction in aerosolized HAV deposits) values for HAV of 29.69 ± 5.49 and 35.25 ± 15.01 mJ/cm² by 255 nm UV-C LED (R² = 0.99 and 0.92) and 6.67 ± 0.63 and 5.21 ± 1.25 mJ/cm² by 279 nm UV-C LED (R² = 0.98 and 0.95) on stainless-steel and glass discs, respectively. These data indicate that 279 nm UV-C LED showed higher efficiency for HAV inactivation than 255 nm UV-C LED, and that Weibull models were a better fit when tailing was observed. This study provides the inactivation data needed to aid in designing UV-C LED systems for delivering doses required to inactivate bio-aerosolized HAV deposits on stainless-steel and glass. Full article

The use of ultraviolet (UV) for water disinfection is known for its chemical-free process and with no harmful disinfection by-products. Yet, the disinfection process remains time-consuming, and many studies are limited to disinfection of one or two microbial species. Direct photolytic and glass-embedded TiO₂ photocatalytic disinfection of four different bacterial species (Staphylococcus aureus, Salmonella senftenberg, Bacillus subtilis, and Escherichia coli) were assessed using UV-LED radiation with wavelengths of 365 nm. The optimization of the UV disinfection under different masses of the TiO₂ photocatalyst was evaluated. Additionally, the order of disinfection of the different bacteria species was assessed. The disinfection effects were measured based on the potential to reduce the number of bacteria species, calculated in colony-forming units/mL and log reduction units. The disinfection of Staphylococcus aureus was enhanced from 1.46 log reduction units in the UV-alone treatment to a high of 5.65 log reduction units in the UV + 0.08 g TiO₂ treatment. Regarding Salmonella senftenberg, disinfection was enhanced from 1.26 log reduction units to 3.85 log reduction units in UV-alone experimental treatments and UV + 0.04 g TiO₂, respectively. Similarly, an increase in Bacillus subtilis reduction was achieved from a low of 0.69 log reduction units to a high of 2.98 log reduction units in UV-alone treatments and UV + 0.08 g TiO₂, respectively. The disinfection of Escherichia coli was enhanced from 2.49 log reduction units (UV-alone treatment) to a high of 6.35 log reduction units (UV + 0.02 g TiO₂). The findings provide key implications and new insights into the studied bacteria species and the future application of porous glass-embedded TiO₂ photocatalysts to enhance bacteria disinfection using UV light for improved water. Full article

The increasing presence of persistent pollutants in industrial wastewater underscores the shortcomings of conventional treatment methods, prompting the adoption of advanced oxidation processes (AOPs) for sustainable water remediation. This review examines the development of AOPs, focusing on their ability to produce hydroxyl radicals and reactive oxygen species (ROS) to mineralize complex pollutants. Homogeneous systems such as Fenton’s reagent show high degradation efficiency. However, challenges like pH sensitivity, catalyst recovery issues, sludge generation, and energy-intensive operations limit their scalability. Heterogeneous catalysts, such as TiO₂-based photocatalysts and Fe₃O₄ composites, offer improved pH adaptability, visible-light activation, and recyclability. Emerging innovations like ultraviolet light emitting diode (UV-LED)-driven systems, plasma-assisted oxidation, and artificial intelligence (AI)-enhanced hybrid reactors demonstrate progress in energy efficiency and process optimization. Nevertheless, key challenges remain, including secondary byproduct formation, mass transfer constraints, and economic feasibility for large-scale applications. Integrating AOPs with membrane filtration or biological treatments enhances treatment synergy, while advances in materials science and computational modeling refine catalyst design and reaction mechanisms. Addressing barriers in energy use, catalyst durability, and practical adaptability requires multidisciplinary collaboration. This review highlights AOPs as pivotal solutions for water security amid growing environmental pollution, urging targeted research to bridge gaps between laboratory success and real-world implementation. Full article

The presence of fungal spores in water poses a significant risk to public health, requiring effective inactivation strategies. Ultraviolet (UV) radiation is a widely used approach, traditionally employing mercury vapor lamps. However, these lamps have efficiency limitations and contain hazardous materials. As an alternative, ultraviolet light-emitting diodes (UV-LEDs) have emerged as a safer and more sustainable option. Despite their advantages, research on their efficacy against fungal spores remains limited. This study investigates the inactivation and post-exposure response of Aspergillus niger and Penicillium sp. spores using a collimated UV-LED system. The impact of two different wavelengths (265 nm and 280 nm) and post-treatment conditions (light and darkness for 24 h) on fungal viability was analyzed. Kinetic modeling was applied to assess the resistance of the spores and their capacity for photoreactivation. The results demonstrate that both the UV wavelength and the environmental conditions after exposure significantly influence disinfection outcomes. Penicillium sp. exhibited greater susceptibility to UV radiation but also higher photoreactivation potential, while A. niger showed stronger resistance and lower recovery capacity. The UV dose required for 99% inactivation, considering photoreactivation effects, was 323.7 ± 90.0 mJ cm⁻² and 321.9 ± 43.8 mJ cm⁻² for A. niger, whereas for Penicillium sp., it was 167.7 ± 13.0 mJ cm⁻² and 146.5 ± 29.2 mJ cm⁻² at 265 nm and 280 nm, respectively. These findings emphasize the necessity of tailoring UV-LED disinfection strategies based on the specific characteristics of the target organisms and post-treatment environmental factors. Full article

This study presents the fabrication and characterization of highly selective, room-temperature gas sensors based on ternary zinc oxide–molybdenum disulfide–titanium dioxide (ZnO-MoS₂-TiO₂) nanoheterostructures. Integrating two-dimensional (2D) MoS₂ with oxide nano materials synergistically combines their unique properties, significantly enhancing gas sensing performance. Comprehensive structural and chemical analyses, including scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), Raman spectroscopy, and Fourier transform infrared spectroscopy (FTIR), confirmed the successful synthesis and composition of the ternary nanoheterostructures. The sensors demonstrated excellent selectivity in detecting low concentrations of nitrogen dioxide (NO₂) among target gases such as ammonia (NH₃), methane (CH₄), and carbon dioxide (CO₂) at room temperature, achieving up to 58% sensitivity at 4 ppm and 6% at 0.1 ppm for NO₂. The prototypes demonstrated outstanding selectivity and a short response time of approximately 0.51 min. The impact of light-assisted enhancement was examined under 1 mW/cm² weak ultraviolet (UV), blue, yellow, and red light-emitting diode (LED) illuminations, with the blue LED proving to deliver the highest sensor responsiveness. These results position ternary ZnO-MoS₂-TiO₂ nanoheterostructures as highly sensitive and selective room-temperature NO₂ gas sensors that are suitable for applications in environmental monitoring, public health, and industrial processes. Full article

In space-based gravitational wave detection missions, inertial sensors act as the inertial reference, requiring the test mass (TM) to maintain exceptionally low residual acceleration noise. High-energy particles, cosmic rays, and ion pumps during ground tests can quickly lead to charge accumulation on the TM surface, necessitating a charge management system to regulate surface charges. To manage the TM surface potential, this paper develops a mathematical model of the charge management system using established ultraviolet (UV) discharge simulation methods. The model describes how photoelectron emission or absorption on the TM surface varies with UV light-emitting diodes (LEDs) power and bias voltage. For the first time, a dual-loop control method is implemented for charge control, highlighting its practical significance. The controller precisely regulates the TM surface potential and residual charges to specified values, achieving a control accuracy of $1.1\times {10}^6$e, meeting the stringent requirements of space-based gravitational wave detection missions. This approach offers a closed-loop charge management solution and provides valuable insights for designing future charge management systems. Full article

In this study, we aim to enhance the internal quantum efficiency (IQE) of AlGaN-based ultraviolet (UV) light-emitting diodes (LEDs) by using the short-period AlGaN/GaN superlattice as a tunnel junction (TJ) to construct polarized structures. We analyze in detail the effect of this polarized TJ on the carrier injection efficiency and investigate the increase in hole and electron density caused by the formation of 2D hole gas (2DHG) and 2D electron gas (2DEG) in the superlattice structure. In addition, a dielectric layer is introduced to evaluate the effect of stress changes on the tunneling probability and current spread in TJ. At a current of 140 mA, this method demonstrates effective current expansion. Our results not only improve the performance of UV LEDs but also provide an important theoretical and experimental basis for future research on UV LEDs based on superlattice TJ. In addition, our study also highlights the key role of group III nitride materials in achieving efficient UV luminescence, and the polarization characteristics and band structure of these materials are critical for optimizing carrier injection and recombination processes. Full article

We investigated hybrid functional transparent conductive electrodes (HFTCEs) composed of indium-tin-oxide (ITO) and silver nanowires (AgNWs) for the enhancement of output efficiency in GaN-based ultraviolet light-emitting diodes (UVLEDs). The HFTCEs demonstrated an optical transmittance of 69.5% at a wavelength of 380 nm and a sheet resistance of 16.4 Ω/sq, while the reference ITO TCE exhibited a transmittance of 76.4% and a sheet resistance of 18.7 Ω/sq. Despite the 8.9% lower optical transmittance, the UVLEDs fabricated with HFTCEs achieved a 25% increase in output efficiency compared to reference UVLEDs. This improvement is attributed to the HFTCE’s twofold longer current spreading length under operating forward voltages, and more significantly, the enhanced out-coupling of localized surface plasmon (LSP) resonance with the trapped wave-guided light modes. Full article

This review describes the development history of group-III nitride light-emitting diodes (LEDs) for over 30 years, which has achieved brilliant achievements and changed people′s lifestyles. The development process of group-III nitride LEDs is the sum of challenges and solutions constantly encountered with shrinking size. Therefore, this paper uses these challenges and solutions as clues for review. It begins with reviewing the development of group-III nitride materials and substrates. On this basis, some key technological breakthroughs in the development of group-III nitride LEDs are reviewed, mainly including substrate pretreatment and p-type doping in material growth, the proposal of new device structures such as nano-LED and quantum dot (QD) LED, and the improvement in luminous efficiency, from the initial challenge of high-efficiency blue luminescence to current challenge of high-efficiency ultraviolet (UV) and red luminescence. Then, the development of micro-LEDs based on group-III nitride LEDs is reviewed in detail. As a new type of display device, micro-LED has drawn a great deal of attention and has become a research hotspot in the current international display area. Finally, based on micro-LEDs, the development trend of nano-LEDs is proposed, which is greener and energy-saving and is expected to become a new star in the future display field. Full article

Several studies have demonstrated that ultraviolet-band-C (UV-C) irradiation can enhance plants’ natural resistance to pathogens and diseases. A suitable dose of UV-C radiation induces the production of metabolites that strengthen plant defenses, an effect known as “hormesis”. Hormesis presents a promising alternative that could supplement and reduce the use of pesticides, which pose risks to the environment and human health. This paper investigates the effects of UV-C radiation emitted by an array of Light-Emitting Diodes (LEDs) in generating a hormetic response in three kiwifruit species, namely A. chinensis var. deliciosa cv. Hayward, A. chinensis var. chinensis cv. Soreli^®, and A. arguta plantlets, grown in vitro and in pots, exposed to the pathogen Pseudomonas syringae pv. actinidiae (Psa) either before or after UV-C irradiation. Analyses of morpho-physiological parameters and spectrophotometric assays were conducted to evaluate changes in chlorophyll a and b content, carotenoids, total phenols, and antioxidant activity in relation to the UV-C irradiation. Results indicate partial protection against Psa infection and increased levels of chlorophylls, carotenoids, polyphenols and antioxidant activity. The optimal UV-C dose was determined to be 2.2 kJ/m² for in vitro shoots and 1.3 kJ/m², for ex vitro plants. Full article