Search Results (250)

Enhancing light absorption in two-dimensional (2D) materials, particularly few-layer structures, is critical for advancing optoelectronic devices such as light sources, photodetectors, and sensors. However, conventional absorption enhancement strategies often suffer from unstable resonant wavelengths and low-quality factors (Q-factors) due to the inherent weak light–matter interactions in 2D materials. To address these limitations, we propose an all-dielectric metasurface graphene-perfect absorber based on toroidal dipole bound state in the continuum (TD-BIC) with an ultra-narrow bandwidth and stable resonant wavelength. The proposed structure achieves tunable absorption linewidths spanning three orders of magnitude (6 nm to 0.0076 nm) through critical coupling modulation. Furthermore, the operational wavelength can be flexibly extended to any near-infrared region by adjusting the grating width. This work establishes a novel paradigm for enhancing the absorption of 2D materials in photonic device applications. Full article

The ability to perform instantaneous frequency measurement (IFM) of unknown microwave signals holds significant importance across various application domains. This paper presents a power-independent microwave photonic IFM system. The proposed system implements frequency measurement through the construction of an amplitude comparison function (ACF) curve, achieved by introducing a frequency-dependent time delay via an optical tunable delay line (OTDL) for the signal under test (SUT). System simulation demonstrates the measurement capability across a wide bandwidth of 0.1–40 GHz with high precision, exhibiting frequency errors ranging from −0.03 to 0.04 GHz. The scheme also maintains consistent performance under varying input power levels. Key implementation aspects, including single-sideband modulation selection and system extension methods, are analyzed in detail to optimize measurement accuracy. Notably, the proposed architecture features a simple and compact design with excellent integration potential. These characteristics, combined with its wide operational bandwidth and high measurement precision, make this approach particularly suitable for demanding applications in electronic reconnaissance and communication. Full article

Entangled multiphoton is an ideal resource for quantum information technology. Here, narrow-bandwidth hyper-entangled quadphoton is theoretically demonstrated by quantizing degenerate Zeeman sub states through spontaneous eight-wave mixing (EWM) in a hot ⁸⁵Rb. Polarization-based energy-time entanglement (output) under multiple polarized dressings is presented in detail with uncorrelated photons and Raman scattering suppressed. High-dimensional entanglement is contrived by passive non-Hermitian characteristic, and EWM-based quadphoton is genuine quadphoton with quadripartite entanglement. High quadphoton production rate is achieved from co-action of four strong input fields, and electromagnetically induced transparency (EIT) slow light effect. Atomic passive non-Hermitian characteristic provides the system with acute coherent tunability around exceptional points (EPs). The results unveil multiple coherent channels (~8) inducing oscillations with multiple periods (~19) in quantum correlations, and high-dimensional (~8) four-body entangled quantum network (capacity ~65536). Coexistent hyper and high-dimensional entanglements facilitate high quantum information capacity. The system can be converted among three working states under regulating passive non-Hermitian characteristic via triple polarized dressing. The research provides a promising approach for applying hyper-entangled multiphoton to tunable quantum networks with high information capacity, whose multi-partite entanglement and multiple-degree-of-freedom properties help optimize the accuracy of quantum sensors. Full article

MOFs-derived magnetic carbon-based composites are considered to be valuable materials for the design of high-performance microwave absorbents. Regulating phase structures and introducing mixed-valence states within the composites is a promising strategy to enhance their charge transfer properties, resulting in improved microwave absorption performance. In this study, iron oxide components show a temperature-dependent phase evolution process (α-Fe₂O₃→Fe₃O₄→Fe₃O₄/FeO), during which the valence states of iron ions are regulated. The tunable phases modulate the magnetic Fe₃O₄ component, resulting in enhanced magnetic loss. The changed valence states affect the polarization relaxation by adjusting the electronic structure and tune the electron scattering by introducing defects, leading to enhanced dielectric loss. The microwave absorption properties of iron oxide@carbon composites display phase- and valence state-dependent characteristics. Especially, Fe₃O₄@C composites exhibit superior microwave absorption properties, ascribed to the improved magnetic/dielectric losses induced by good impedance matching and strong microwave attenuation capacity. The minimum reflection loss of Fe₃O₄@C composites reaches −73.14 dB at 10.35 GHz with an effective absorption bandwidth of 4.9 GHz (7.69–12.59 GHz) when the absorber thickness is 2.31 mm. This work provides new insights into the adjustment of electromagnetic parameters and microwave absorption properties by regulating the phase and valence state. Full article

A novel photonics-assisted technique for generating reconfigurable frequency hopping (FH) signals is proposed and demonstrated through optical comb filtering (OCF). The arithmetic progression of frequency difference between OCF passbands and optical frequency comb lines is exploited to enable wavelength selection controlled by an intermediate frequency signal, with ultra-wideband FH signals subsequently being generated through optical heterodyning. Comprehensive theoretical and numerical investigations are conducted, demonstrating the successful generation of diverse FH waveforms including 5-, 10-, and 25-level stepped frequency signals, Costas-coded patterns, as well as complex wideband signals such as 30 GHz linear frequency modulated and 24 GHz sinusoidal chirped waveforms. Critical system considerations including laser frequency stability, FH speed, and parameter optimization are examined. Wide tunable bandwidth exceeding 30 GHz, good stability, and inherent compatibility with photonic integration is achieved, showing significant potential for advanced applications in cognitive radio and modern radar systems where high-performance frequency-agile signal generation is required. Full article

The ability to broaden the bandwidth of nanodevices holds significant promise for applications in modern science and technology. In this work, we demonstrate a tunable approach to the bandwidth modulation of nanoresonators by applying a direct current electric field. Quantum hydrodynamic theory reveals that the biased electric field redistributes surface charges, inducing positively and negatively charged regions on the metal surface. This charge asymmetry splits the plasmonic modes, resulting in bandwidth broadening. The optical response can be finely tuned by varying the amplitude and polarization direction of the bias field. This mechanism offers a versatile strategy for developing nanodevices, including metasurfaces with dynamically adjustable bandwidths. Full article

With the rapid advancement of Internet of Things (IoT) technology, ultra-wideband flexible transparent antennas have garnered substantial attention for their potential applications in wireless communication devices. Poly(methyl methacrylate) (PMMA), renowned for its exceptional optical properties and favorable processing characteristics, has been extensively utilized as a transparent substrate material for antennas. However, the intrinsic brittleness of transparent PMMA substrates poses a significant limitation in applications such as flexible antennas. In this study, we introduce a superspreading strategy to address the complex trade-off among transparency, toughness, and dielectric properties in flexible electronics through molecular disorder engineering. The PMMA films fabricated via this superspreading strategy exhibit a visible transmittance of 85–95% at 400 nm, a toughness of 9 × 10⁵ J/m³ (representing an enhancement of 150–225% compared to conventional methods), and a frequency-stable permittivity (ε_r = 3.6 ± 0.05) within the 9–12 GHz range. These films also feature a precisely tunable thickness range of 5.5–60 μm. The PMMA-based flexible transparent antenna demonstrates a gain of 2–4 dBi and a relative bandwidth of 40%, thereby confirming its suitability for ultra-wideband applications. Collectively, this research presents a promising candidate for the development of ultra-wideband flexible transparent antennas. Full article

We report a coherent tri-frequency microwave signal generation approach using an optoelectronic oscillator (OEO). In the previous literature, the OEO-based schemes can only generate coherent microwave signals with dual frequencies. In this work, we demonstrate that the generation of coherent tri-frequency microwave signals is also possible using an OEO loop. The key component in our scheme is a tri-passband electrical filter, which has a narrow passband in the middle and two wide passbands on both sides. The OEO loop initially oscillates at the central frequency of the narrow passband with a single-tone f₁. By injecting a microwave signal, f_inj, into the OEO loop, down- and up-converted microwave signals at frequencies of f₂ = f₁ − f_inj and f₃ = f₁ + f_inj, respectively, are generated by frequency mixing in a microwave mixer. The two wide passbands of the electrical filter allow the oscillation of the converted signals at a wide frequency bandwidth by simply tuning the frequency of the injected signal. Moreover, the tri-frequency microwave signals are phase-locked through frequency mixing and mutual injection locking. The proposed scheme is theoretically analyzed and experimentally validated. In the experiments, coherent tri-frequency microwave signals with low phase noise are successfully generated at a fixed frequency of 14 GHz and two tunable frequency ranges from 9 to 12 GHz and from 16 to 19 GHz, respectively. Full article

In this paper, a scheme for generating high-quality tunable microwave-frequency combs (MFCs) is proposed. The proposed scheme is based on an initially non-flat MFC generated by a directly modulated laser operating in gain-switching status. Filtering operations are used to increase the flatness of the MFC. Concretely, by employing an optical bandpass filter and a two-tap negative-coefficient microwave photonic filter, the flatness of the MFC is significantly optimized. In the experiment, MFCs with adjustable comb spacing from 0.5 GHz to 1.6 GHz and bandwidths ranging from 0 to 26.5 GHz are generated. The flatness is better than ±2.5 dB for the MFC. The proposed scheme provides a simple, efficient, and high-performance solution for generating MFCs, making it a promising candidate for various applications requiring high-quality MFC sources. Full article

Phononic crystals (PnCs) have garnered significant interest owing to their ability to manipulate wave propagation, particularly through phononic band gaps and defect modes. However, conventional defective PnCs are limited by their fixed defect-band frequencies, which restricts their adaptability to dynamic environments. This study introduces a novel approach for temperature-controlled tunability of defective PnCs by integrating shape memory alloys (SMAs) into defect regions. The reversible phase transformations of SMAs, driven by temperature variations, induce significant changes in their mechanical properties, enabling real-time adjustment of defect-band frequencies. An analytical model is developed to predict the relationship between the temperature-modulated material properties and defect-band shifts, which is validated through numerical simulations. The results demonstrate that defect-band frequencies can be dynamically controlled within a specified range, thereby enhancing the operational bandwidth of the ultrasonic sensors. Additionally, sensing-performance analysis confirms that while defect-band frequencies shift with temperature, the output voltage of the sensors remains stable, ensuring reliable sensitivity across varying conditions. This study represents a significant advancement in tunable PnC technology, paving the way for next-generation ultrasonic sensors with enhanced adaptability and reliability in complex environments. Full article

In the realm of quantum communication and photonic technologies, the extension of coherence time for photon wave packets is essential for improving system efficacy. This research introduces a methodology for measuring coherence time utilizing an unbalanced fiber interferometer, specifically designed for tunable pulse-width photon wave packets produced by cold atoms. By synchronously generating write pulses, signal light, and frequency-locking light from a single laser source, the study effectively mitigated frequency discrepancies that typically arise from the use of multiple light sources. The implementation of frequency-resolved photon counting under phase-locked conditions was accomplished through the application of polarization filtering and cascaded filtering techniques. The experimental results indicated that the periodicity of frequency shifts in interference fringe patterns diminishes as the differences in delay arm lengths increase, while fluctuations in fiber length and high-frequency laser jitter adversely affect interference visibility. Through an analysis of the correlation between delay and photon counts, the coherence time of the write laser was determined to be 2.56 µs, whereas the Stokes photons produced through interactions with cold atoms exhibited a reduced coherence time of 1.23 µs. The findings suggest that enhancements in laser bandwidth compression and fiber phase stability could further prolong the coherence time of photon wave packets generated by cold atoms, thereby providing valuable technical support for high-fidelity quantum information processing. Full article

The realization of broad-wavelength tunability of the structural color in Double layered Cholesteric Liquid Crystal Elastomers (DCLCEs), along with good flexibility and processability, presents a significant challenge. This research introduces a facile and effective fabrication technique, Solvent Evaporation-Induced Self-Assembly (SEISA), for the production of DCLCEs exhibiting broad wavelength tunability, superior flexibility, and robust mechanical characteristics. Focusing on initial color tuning, bubble defect minimization, UV photopolymerization, and coating procedures, this research systematically optimizes the fabrication process through experimental investigation of factors like chiral dopant amount, temperature, UV exposure duration, coating thickness, and speed. The method enabled the successful fabrication of DCLCEs with uniform and controllable coloration, demonstrating the effectiveness of this controlled synthesis approach in significantly enhancing structural color features. Upon stretching to 2.8 times its original length, the center wavelength shifted from 613 nm to 404 nm, yielding a tunable bandwidth of up to 209 nm across the visible spectrum. Full article

Hyperspectral LiDAR (HSL) is a promising active detection technique for underwater positioning and remote sensing, enabling the simultaneous acquisition of three-dimensional topographic and spectral information of underwater targets. This study presents an advanced underwater hyperspectral LiDAR (UDHSL) system with a spectral range of 450–700 nm, adjustable spectral bandwidth of 10–300 nm, and tunable repetition frequency of 50 kHz to 1 MHz. The system achieves high precision with a laser divergence angle of ≤1 mrad, pulse width of 7 ns, laser energy of 7.5 µJ, ranging resolution of 1.13 cm and ranging accuracy of 1.02 m@distance of 27 m. Hyperspectral point clouds spanning 11 bands (450–650 nm) are generated during 3D pool experiments. The distance-colored point clouds precisely align with the geometric characteristics of targets, the normalized intensity-colored point clouds across spectral bands exhibit discriminative capabilities for target identification, and the color-composite point clouds approximate the true colors of targets, collectively validating the system’s ability to concurrently acquire spectral and topographic data. These results underscore the potential of this technology for underwater exploration and positioning applications. Full article

MXene is widely used in the fields of microwave absorption and electromagnetic shielding to balance electromagnetic pollution with the development of communication technologies and human health, due to its excellent surface functional groups and tunable electronic properties. Although pure multilayered MXene has an excellent accordion-like structure, the weak dielectric loss and lack of magnetic loss result in poor microwave absorption performance. Here, we propose a strategy for the catalytic growth of CNTs by the electrophoretic deposition of adsorbed metal ions, leading to the successful preparation of Ni-MWCNTs/Ti₃C₂T_x composites with a “layer-by-layer” structure, achieved through in situ regulated growth of CNTs. By introducing dielectric–magnetic synergy to improve the impedance matching conditions, and by regulating the diameter of the CNTs to alter the electromagnetic parameters of Ni-MWCNTs/Ti₃C₂T_x, the 2-Ni-MWCNTs/Ti₃C₂T_x composite achieves the best reflection loss (RL) value of −44.08 dB and an effective absorption bandwidth of 1.52 GHz at only 2.49 mm thickness. This unique layered structure and the regulation strategy provide new opportunities for the development of few-layered MXene composites. Full article

We propose and demonstrate a tunable femtosecond electro-optic optical frequency comb by shaping a continuous-wave seed laser in an all-fiber configuration. The seed laser, operating at 1.5 μm, is first cascade-phase-modulated and subsequently de-chirped to generate low-contrast pulses of approximately 8 ps at a repetition rate of 5.95 GHz. These pulses are then refined into clean, high-quality picosecond pulses using a Mamyshev regenerator. The generated source is further amplified using an erbium–ytterbium-doped fiber amplifier operating in a highly nonlinear regime, yielding output pulses compressed to around 470 fs. Tunable continuously across a 5.7~6 GHz range with a 1 MHz resolution, the picosecond pulses undergo nonlinear propagation in the final amplification stage, leading to output pulses that can be further compressed to a few hundred femtoseconds. By using a tunable bandpass filter, the center wavelength and spectral bandwidth can be flexibly tuned. This system eliminates the need for mode-locked cavities, simplifying conventional ultrafast electro-optic combs by relying solely on phase modulation, while delivering femtosecond pulses at multiple-gigahertz repetition rates. Full article