Search Results (74)

In this in vitro study, we compare the discoloration potential of three premixed calcium silicate cements, specifically EndoCem MTA Premixed, Bio-C Repair, and NeoPUTTY, when applied with or without two surface pretreatments (Nd-YAG laser irradiation or dentin-bonding agents). One hundred extracted human maxillary incisors were allocated into ten groups (n = 10), including the untreated control group. A standard access cavity was prepared in all teeth except the control group. Groups were formed according to the type of premixed calcium silicate cement used and the surface pretreatment applied to the internal surfaces of the cavities. Color measurements were taken with a VITA Easyshade Advance 5.0 spectrophotometer and converted to ΔE values using the CIEDE2000 formula at baseline (T0) and 7 (T1), 30 (T2), 90 (T3), and 180 (T4) days. Data were analyzed using the Shapiro–Wilk test to assess normality, followed by the Friedman and Kruskal–Wallis tests for within- and between-group comparisons, respectively (α = 0.05). No statistically or clinically significant differences in ${∆\mathrm{E}}_{00}$ were detected among materials, surface treatments, or timepoints (p > 0.05). All mean ${∆\mathrm{E}}_{00}$ values remained below the perceptibility threshold (3.5). Within the limitations of this 180-day in vitro model, the tested materials showed favorable short-term color stability, and neither the Nd-YAG laser nor the dentin-bonding agents altered the outcomes. Long-term in vivo studies are required to recommend their clinical use in aesthetically critical areas. Full article

Background/Objectives: Tooth discoloration is a common concern associated with the use of intra-canal medicaments, particularly those containing antibiotics. This study aims to evaluate the tooth discoloration potential of an experimental antibiotic paste modified with Nano Chitosan (APNC) and compare it with two antibiotic pastes and two calcium hydroxide-based pastes over different time intervals. Methods: Fifty bovine incisors were standardized and prepared up to size 60. The teeth were randomly assigned into five groups based on the medicament applied: Metapaste, Metapex, modified Triple Antibiotic Paste (mTAP), Double Antibiotic Paste (DAP), and APNC. A digital spectrophotometer was used to measure the color parameters (L*, a*, and b*) at two zones, above and below the cemento-enamel junction (CEJ), across four-time points: before application (T0- baseline), immediately after application (T1), after two weeks (T2), and after one month (T3). The color changes (ΔE) were calculated and statistically analyzed using repeated-measure ANOVA. Results: Statistically significant differences in discoloration were observed between the tested medicaments after one month (p < 0.05). mTAP caused the highest ΔE values both above and below the CEJ at all time points, particularly after one month (p < 0.05). Conversely, APNC, Metapaste, and DAP demonstrated the least discoloration, with no significant differences among them. The degree of discoloration was time-dependent and more pronounced below the CEJ in all groups. Conclusions: After one month, the experimental APNC paste induced tooth discoloration comparable to that of Metapaste, indicating minimal esthetic compromise. APNC may be a promising alternative to traditional antibiotic pastes with minimal discoloration effects. Full article

Tooth bleaching is a widely used esthetic treatment; however, bleaching agents can temporarily alter the surface morphology of enamel, increasing surface roughness and porosity, which may lead to increased susceptibility to discoloration. This in vitro study investigated the effectiveness of fluoride varnish in preventing immediate discoloration of bovine incisors after bleaching. Specimens were bleached with 35% hydrogen peroxide and treated with either Clinpro White Varnish (CW) or Enamelast Fluoride Varnish (EN), whereas control specimens received no treatment after bleaching. The samples were immersed in coffee for 24 h, and the color difference (ΔE₀₀) was calculated using the CIEDE2000 formula. The surface morphology of enamel was examined using SEM. The fluoride varnish groups showed significantly lower color difference values than the control group (p < 0.05), with ΔE₀₀ reduced by approximately two-thirds in both the CW and EN groups. SEM observations showed that the enamel surfaces in the varnish-treated groups exhibited reduced surface irregularities compared to the untreated group, suggesting remineralization. These results suggest that the immediate application of fluoride varnish after bleaching can effectively reduce short-term discoloration by providing physical protection and promoting remineralization. Fluoride varnish may serve as a simple and effective strategy to maintain whitening outcomes and minimize early discoloration. Full article

Background: Early childhood dental decay remains a pervasive chronic condition, and environmental toxicants—particularly lead—may exacerbate its development. This systematic review was designed to synthesize evidence on how lead exposure correlates with both the occurrence of carious lesions and aesthetic alterations in children’s primary teeth. Methods: A comprehensive search was conducted in PubMed, Scopus, and Web of Science through April 2025, selecting observational investigations that assessed the link between lead levels and primary-tooth decay in pediatric cohorts. Thirteen eligible studies, encompassing 44,846 participants aged 2–19 years, were included for qualitative synthesis. Aesthetics were screened using author-defined enamel-defect or discoloration endpoints; however, only three studies reported compatible metrics, precluding quantitative pooling. Heterogeneity in exposure matrices likewise ruled out meta-analysis. Results: Most studies reported a statistically significant association between higher lead burden and greater prevalence or severity of caries in primary teeth. Blood lead concentrations across studies ranged from means of 1.53 μg/dL to geometric means of 7.2 μg/dL. Notably, elevated lead was linked to increased decayed, missing, or filled surfaces—with an adjusted risk ratio of 1.14 (95% CI: 1.02–1.27) at levels below 5 μg/dL—and adjusted mean ratios of up to 2.14 for decayed or filled teeth when blood lead reached 5–10 μg/dL. Conclusions: Current evidence suggests that children’s exposure to lead may heighten the risk of caries and detract from the aesthetic quality of primary teeth. However, variability in study design, lead quantification methods, and confounder adjustment limit the consistency of findings. Mitigating lead exposure in early life could represent a valuable preventive strategy against dental decay in susceptible pediatric populations. Full article

Smoking is a major risk factor for a variety of oral diseases. In particular, smoking-induced dental stains have been shown to be more refractory than those in non-smokers. Hydroxyapatite (HAP) is a biomimetic material that has been shown to be helpful in many oral health applications; however, its efficacy in stain removal in smokers and non-smokers is uncertain. To compare the effects of HAP toothpaste on the removal/control of extrinsic tooth discoloration in smokers and non-smokers. The secondary goal was to compare smokers and non-smokers in terms of staining extent and response to HAP. A total of 100 adults (50 smokers, 50 non-smokers) who met the inclusion and exclusion criteria were invited to participate in the study. At baseline and 2 weeks after the intervention, the same examiner performed clinical observations, including measurements of anterior tooth stain using the approximal plaque index (API) and the Lobene stain index. Adverse events and any changes in general health conditions of the patients were monitored. Comparisons of indices at baseline and post-intervention yielded statistically significant differences. In non-smokers, the median API (IQR) at baseline was 32.5 (19.0, 63.0) which decreased to 16.5 (7.0, 42.0) after the intervention (p < 0.001). The median Lobene stain index (extension) at baseline and after the intervention was 0.9 (0.5, 1.3) and 0.3 (0.2, 0.7), respectively (p < 0.001). In smokers, the median API at baseline (IQR) was 46.0 (30.0, 86.0), which decreased to 23.0 (7.0, 43.0) (p < 0.001) post-intervention. Lobene stain indices were lower after intervention in all groups than at baseline (all, p < 0.001), and the magnitude of reduction was more prominent in the smoker group. This study demonstrates that 2-week use of a toothpaste containing HAP can effectively reduce extrinsic tooth stains in smokers and non-smokers. Full article

Background: Composite resin veneers have gained popularity due to their affordability and minimally invasive application as biomimetic restorations. However, long-term clinical challenges, such as discoloration, wear, and reduced fracture resistance, necessitate their replacement over time. Ceramic veneers, particularly feldspathic and lithium disilicate, offer superior esthetics and durability, as demonstrated by studies showing their high survival rates and enamel-preserving preparation designs. However, while ceramic veneers survive longer than composite resin veneers, ceramic veneers may need to be removed and replaced. Reports vary for using Er:YAG (erbium-doped yttrium aluminum garnet) lasers for the removal of existing veneers. Methods: A review was conducted to evaluate the effectiveness of removing restorative materials with an Er:YAG laser. A clinical study was included, highlighting the conservative removal of aged composite resin veneers using the Er:YAG laser. This method minimizes enamel damage and facilitates efficient debonding. Following laser application, minimally invasive tooth preparation was performed, and feldspathic porcelain veneers were bonded. Results: The review showed positive outcomes whenever the Er:YAG laser was used. In the case study, after a 3-year follow-up, the restorations exhibited optimal function and esthetics. Conclusions: Laser-assisted debonding provides a safe and predictable method for replacing failing composite veneers with ceramic alternatives, aligning with contemporary biomimetic principles. Full article

Objectives: The synergistic effect of shock wave-enhanced emission photoacoustic streaming (SWEEPS) and antimicrobial photodynamic therapy (aPDT) in mandibular molar root canal disinfection remains underexplored, particularly against dual-species biofilms that better simulate clinical conditions. This study evaluates their combined antimicrobial efficacy against Enterococcus faecalis and Candida albicans biofilms and assesses potential tooth discoloration caused by riboflavin and nano-curcumin. Materials and Methods: The mesiobuccal canals of 57 extracted mandibular molars were inoculated with E. faecalis and C. albicans biofilms. The antimicrobial effects were assessed using riboflavin or nano-curcumin with a 450 nm diode laser (BDL), SWEEPS, or their combinations, compared to 5.25% NaOCl (positive control) and saline (negative control). Biofilm reduction was quantified by colony-forming units (CFUs/mL), and discoloration was evaluated using the ΔE metric in the CIE L*a*b* color space. Results: Both microorganisms showed a significant decrease in colony numbers in all experimental groups compared to the negative control (p < 0.001), except for E. faecalis, where no significant difference was observed between the riboflavin/nano-curcumin groups and the negative control. Combining riboflavin or nano-curcumin with SWEEPS or BDL significantly enhanced antimicrobial efficacy compared to individual treatments (p < 0.001). The combined photodynamic therapy and SWEEPS groups showed the lowest colony counts. The ΔE values were, on average, 1.81 for riboflavin and 1.09 for nano-curcumin. Conclusions: The combination of SWEEPS and aPDT effectively reduces E. faecalis and C. albicans biofilms in molars, supporting its potential as an adjunct in endodontic disinfection. Minimal discoloration further highlights its clinical applicability. Full article

Background: Lithium disilicate ceramic veneers are considered the gold standard in aesthetic dentistry due to their translucency, strength, and adhesive bonding properties. This clinical case report details the aesthetic rehabilitation of a patient through the use of pressed lithium disilicate veneers, highlighting the treatment workflow, material selection rationale, and the long-term functional and aesthetic outcomes achieved. Methods: A review was conducted to evaluate the long-term success of lithium disilicate. A case study is presented that involves a 32-year-old female patient with anterior tooth discoloration, minor morphological discrepancies, and a desire for smile enhancement. A conservative approach using pressed lithium disilicate was chosen to restore harmony and enhance natural aesthetics. The treatment involved minimally invasive tooth preparation, digital smile design, and adhesive cementation using a total-etch technique with light-cured resin cement. High-resolution intra-oral and extra-oral photographs documented the case, capturing the preoperative, preparation, and final restoration stages. These images highlight shade matching, margin adaptation, and smile transformation after veneering. Results: Postoperative evaluation showed excellent aesthetic outcomes, color integration, and marginal adaptation, with the patient expressing high satisfaction. The veneers exhibited optimal translucency and strength, ensuring long-term durability. A one-year follow-up revealed no debonding, marginal discoloration, or surface degradation, confirming the clinical reliability of lithium disilicate veneers. Conclusions: Lithium disilicate provides predictability, durability, and high aesthetic results, making it an ideal choice for minimally invasive smile enhancement. The use of photographic documentation emphasizes the importance of case planning, precise preparation, and adhesive bonding for successful outcomes. Future research should focus on long-term survival rates and complication prevention to further refine material selection and bonding protocols. Full article

This study assessed the bleaching and abrasiveness levels of different kinds of toothpaste with various RDA values on nanohybrid and microhybrid composite samples using a novel Press-on Force-Guided brushing simulator. One hundred and forty disc-shaped samples were prepared using two nano-hybrid and three microhybrid composites and divided randomly into four subgroups (n = 7). The samples were immersed in a coffee solution for 144 h and then brushed using R.O.C.S. (Remineralizing Oral Care Systems) brand toothpaste with different RDA values [Sensitive Instant Relief (SIR), Sensation Whitening (SW), and their combination with PRO Polishing (PP) (once a week)] using a brushing simulator for 140, 280 and 560 strokes (140 strokes correspondence to one week of real-time brushing). The level of surface roughness and color change (ΔE) were measured before and after the simulated brushing. Color changes were evaluated in Photoshop CC software through ∆E₀₀* values generated from before and after L, a*, b* parameters on sample photographs taken by a mobile dental photography tool. The surface structure of samples was measured before and after the brushing using a profilometer. The measurements were analyzed in SPSS V23 software by Analysis of Variance and the Bonferroni Test, and the level of significance was set at <0.05. Regarding ΔE values comparisons, there were no significant differences between the toothpastes after 2 weeks of brushing. SW (2.82 ± 1.24), SIR + PP (2.78 ± 0.98), and SW + PP (2.84 ± 1.22) values were found to be similar after one month of brushing (p < 0.007). Regarding surface roughness comparisons between the toothpastes, two-week and one-month brushing values were found to be similar and statistically rougher than the initial values. Using R.O.C.S. PRO Polishing with low-abrasive toothpaste may increase the whitening effect by enhancing color recovery. Full article

This study aimed to investigate the effects of shade, thickness, and the application of an opaquer on the masking ability and translucency of direct gingiva-colored giomer. Five shades of giomer, namely Gum-Light-Pink, Gum-Dark-Pink, Gum-Brown, Gum-Violet, and Gum-Orange, were evaluated at thicknesses of 0.5, 1.0, 1.5, and 2.0 mm. Color measurements were obtained using a spectrophotometer against white, black, and giomer backgrounds. The results were analyzed using the CIEDE2000 color-difference formula and interpreted based on the 50:50% thresholds for excellent perceptibility (ΔE₀₀ < 1.1) and acceptability (ΔE₀₀ < 2.8). Measurements were repeated after applying an opaquer. Acceptable masking ability was achieved at 0.5 mm for all shades. Excellent masking ability was achieved at 1.5 mm for all shades, except Gum-Brown, which required 1.0 mm. The opaquer increased masking ability in all specimens. Translucency decreased as thickness increased (p < 0.0001). Gum-Brown and Gum-Light-Pink, as well as Gum-Orange and Gum-Dark-Pink, demonstrated similar translucency at 0.5, 1.0, and 1.5 mm (p > 0.05). After applying the opaquer, there were no statistically significant differences in translucency among shades at 1.5 mm and 2.0 mm (p > 0.05). In conclusion, increasing thickness improved masking ability but reduced translucency of gingiva-colored material. The opaquer further enhanced masking ability and reduced translucency. The clinical significance of these results are that gingiva-colored restorations mask discolored tooth defects in the pink aesthetic area with minimal 0.5 mm tooth preparation, achieving acceptable results. The addition of an opaquer enhances masking ability for excellent outcomes. Full article

A novel water-soluble root canal filling material based on sodium iodide (NaI) has been developed to overcome the limitations of existing iodine-based formulations. However, the biological stability of this approach in animal studies remains unverified. This study evaluated the biocompatibility of NaI compared to commercial root canal filling materials (Calcipex II and Vitapex^®) in pulpectomized canine teeth to assess its clinical applicability. Following a four-week observation period, none of the experimental groups exhibited tooth mobility or fistula formation. Radiographic and micro-CT analyses revealed no radiolucency in periapical lesions. Histopathologic evaluation demonstrated the absence of inflammatory responses in periapical regions across all material groups, with histological inflammation scoring 0. High-magnification histological examination of periapical areas showed well-preserved periodontal ligament tissue in all groups. Despite certain limitations of NaI-based fillings in the pulp cavity, including loss of radiopacity and tooth discoloration, NaI demonstrates potential as a safe and effective alternative for pulp filling material, particularly due to its minimal risk of root resorption and inflammatory response. Full article

Background: Root fractures are defined as injuries involving dentine, cementum, and the pulp. They are rare, and they account for 0.5–7% of the dental injuries in the permanent teeth. Root fractures may be the result of direct trauma to the teeth or indirect trauma to the oral cavity. Their incidence is highest in the group of adolescent patients aged 11 to 20 years. The purpose of the paper is to review the literature supported by a case series with three different types of root fractures with various healing patterns, though all with successful long-term treatment outcomes. Case series: All presented patients were boys aged 10 to 11 years. Root fractures occurred as a result of direct impact with the teeth by an object. Only one boy had his root-fractured teeth endodontically treated. However, one of the teeth was misdiagnosed with pulp necrosis, and the other became non-vital after additional trauma. Conclusions: Root fractures in young patients have good healing potential. Appropriate and early diagnostic and therapeutic procedures for treating root-fractured teeth are necessary to achieve favorable healing and a good long-term prognosis. Regardless of the pattern of healing of fractured roots and the treatment provided, patients require long-term follow-up and the need to plan a management strategy in case complications occur. Failure of the healing of fractured root is a worst-case scenario, especially in patients of developmental age. In such cases, the primary goal of treatment is to preserve the alveolar ridge until growth is complete. Full article

Objective: Esthetic dentistry is an important factor in increasing patients’ quality of life. This study aimed to investigate the impact of laser use on bleaching procedures for natural teeth and dental restorative materials. Methods: In January 2024, an electronic search was conducted using PubMed, Web of Science (WoS), and Scopus databases with the keywords (tooth) AND (laser) AND (bleaching), following PRISMA guidelines and the PICO framework. The initial search yielded 852 articles, of which 441 were screened. After applying inclusion criteria, 376 articles were excluded as they did not focus on the use of lasers in bleaching natural teeth and restorative materials. Consequently, 40 articles were included in the final review. Results: Of the 40 qualified publications, 29 utilized a diode laser, of which 10 authors concluded that it increases the whitening effect comparing classical methods. Three of included publications investigated the whitening of dental materials, while another three focused on endodontically treated teeth. Whitening procedures on ceramics effectively removed discoloration, but the resulting color did not significantly differ from the initial shade. Conversely, composite materials not only failed to bleach but also exhibited altered physical properties, thereby increasing their susceptibility to further discoloration. The KTP laser demonstrated promising outcomes on specific stains. The Er,Cr:YSGG and Er:YAG lasers also showed beneficial effects, although there were variations in their efficacy and required activation times. Conclusions: The findings partially indicate that laser-assisted bleaching improves the whitening of natural teeth. Further research on the effect of laser bleaching on the physical parameters of restorative materials is necessary. Full article

Background: The discoloration of endodontically treated anterior teeth poses a significant aesthetic concern for many individuals, impacting their confidence and self-image. Porcelain veneers have emerged as a popular solution for the aesthetic restoration of such teeth. This paper explores the role of porcelain veneers in addressing tooth discoloration, examining their efficacy, durability, and aesthetic outcomes via a clinical case. Case description: In this clinical case, an aesthetic restoration of a discolored central incisor was performed using a ceramic veneer. Due to the high degree of discoloration, an internal bleaching of the tooth was carried out prior to the final restoration. Various factors influencing the selection of porcelain veneers as a treatment modality, including shade matching, preparation techniques, and adhesive bonding, are discussed. Conclusions: The advancements in materials and techniques have enhanced the versatility and aesthetic appeal of porcelain veneers, making them a valuable option for achieving natural-looking and durable aesthetic restorations in individuals with discolored endodontically treated anterior teeth. Full article

Color stability is crucial for dental materials to ensure they perfectly match a patient’s tooth color. This is particularly challenging in photoresist-based additive manufacturing. Although some studies have addressed this issue, the exact causes of discoloration and ways to minimize it remain unclear. In this study, the intrinsic causes of discoloration in materials intended for 3D printing are investigated by examining thin-film samples (1200 µm) of various compositions, which are stored under different conditions. The samples are evaluated by measuring the UV-Vis absorption spectra at regular intervals to monitor changes. The findings reveal that both the composition of the formulations and the storage conditions significantly influence the discoloration behavior. Furthermore, methods have been developed to reduce or completely prevent discoloration. The use of photoinitiators with sterically demanding benzoyl moieties, as well as the addition of stabilizers, effectively decreases the intensity of emerging discoloration. Furthermore, incorporating the oxidizing agent cumene hydroperoxide (CHP) results in materials that maintain color stability. Full article