Search Results (386)

In this study, we synthesized anode materials based on iron oxide (Fe₂O₃), titanium dioxide (TiO₂), and reduced graphene oxide (rGO) via the electrophoretic deposition technique. The structural and morphological characteristics of electrodes were examined through various methods including SEM, XRD, Raman, and XPS. Among the investigated compositions, the three-component Fe₂O₃/TiO₂/rGO electrode displayed superior electrochemical characteristics in comparison to the binary Fe₂O₃/rGO and TiO₂/rGO electrodes. Specific capacities of 571, 683, and 729 mAh/g were achieved at 0.5 mA for the respective Fe₂O₃:TiO₂ molar ratios of 1:1, 2:1, and 3:1. The 2:1 ratio configuration offered the most promising balance between cycling stability and capacity, highlighting its potential as a high-performance anode in lithium-ion batteries. This work contributes valuable insights into the synergistic behavior of dual-transition metal oxides in composite electrode design using a low-cost and scalable method. Full article

Titanium dioxide (TiO₂) is a wide-bandgap semiconductor material with broad application potential, known for its excellent photocatalytic performance, high chemical stability, low cost, and non-toxicity. These properties make it highly attractive for applications in photovoltaic energy, environmental remediation, and optoelectronic devices. For instance, TiO₂ is widely used as a photocatalyst for hydrogen production via water splitting and for degrading organic pollutants, thanks to its efficient photo-generated electron–hole separation. Additionally, TiO₂ exhibits remarkable performance in dye-sensitized solar cells and photodetectors, providing critical support for advancements in green energy and photoelectric conversion technologies. Boron-doped diamond (BDD) is renowned for its exceptional electrical conductivity, high hardness, wide electrochemical window, and outstanding chemical inertness. These unique characteristics enable its extensive use in fields such as electrochemical analysis, electrocatalysis, sensors, and biomedicine. For example, BDD electrodes exhibit high sensitivity and stability in detecting trace chemicals and pollutants, while also demonstrating excellent performance in electrocatalytic water splitting and industrial wastewater treatment. Its chemical stability and biocompatibility make it an ideal material for biosensors and implantable devices. Research indicates that the combination of TiO₂ nanostructures and BDD into heterostructures can exhibit unexpected optical and electrical performance and transport behavior, opening up new possibilities for photoluminescence and rectifier diode devices. However, applications based on this heterostructure still face challenges, particularly in terms of photodetector, photoelectric emitter, optical modulator, and optical fiber devices under high-temperature conditions. This article explores the potential and prospects of their combined heterostructures in the field of optoelectronic devices such as photodetector, light emitting diode (LED), memory, field effect transistor (FET) and sensing. TiO₂/BDD heterojunction can enhance photoresponsivity and extend the spectral detection range which enables stability in high-temperature and harsh environments due to BDD’s thermal conductivity. This article proposes future research directions and prospects to facilitate the development of TiO₂ nanostructured materials and BDD-based heterostructures, providing a foundation for enhancing photoresponsivity and extending the spectral detection range enables stability in high-temperature and high-frequency optoelectronic devices field. Further research and exploration of optoelectronic devices based on TiO₂-BDD heterostructures hold significant importance, offering new breakthroughs and innovations for the future development of optoelectronic technology. Full article

Electrocatalytic urea synthesis offers great potential for sustainable strategies through CO₂ and NO₃⁻ reduction reactions. However, the development of high-performance catalysts is often hampered by the complexity of synthetic methodologies and the unresolved nature of C-N coupling pathways. In this study, we present a copper–indium co-doped titanium dioxide (CuIn-TiO₂) catalyst that exhibits remarkable efficacy in enhancing the synergistic reduction of CO₂ and NO₃⁻ to produce urea. The bimetallic CuIn site functions as the primary active site for the C-N coupling reaction, achieving a urea yield rate of 411.8 μg h⁻¹ mg_cat⁻¹ with a Faradaic efficiency of 6.7% at −0.8 V versus reversible hydrogen electrode (vs. RHE). A body of experimental and theoretical research has demonstrated that the nanoscale particles enhance the density of active sites and improve the feasibility of reactions on the surface of TiO₂. The co-doping of Cu and In has been shown to significantly enhance electronic conductivity, increase the adsorption affinity for *CO₂ and *NO₃⁻, and promote the C-N coupling process. The CuIn-TiO₂ catalyst has been demonstrated to effectively promote the reduction of NO₃⁻ and CO₂, as well as accelerate the C-N coupling reaction. This effect is a result of a synergistic interaction among the catalyst’s components. Full article

Both biochemical cues and the electrophysiological microenvironment play a pivotal role in influencing cell behaviors. In this study, collagen/polypyrrole biomimetic electroactive composite coatings with a fiber network structure were constructed on the surface of titanium substrates by hot alkali treatment and stepwise electrochemical deposition. Materialistic characterization and electrochemical performance tests demonstrated that the titanium electrodes modified with collagen/polypyrrole composite coatings exhibited the surface morphology of a collagen film layer, and their electroactivity was significantly enhanced. Cellular experiments demonstrated that the collagen in the composite coatings could provide good biomimetic biochemical cues as a main extracellular matrix component, which have a substantial effect in promoting cell adhesion, proliferation, and osteogenic differentiation. Furthermore, under exogenous electrical signals, the polypyrrole coating has the capacity to facilitate an appropriate electrophysiological microenvironment, thereby promoting osteogenic differentiation. The collagen/polypyrrole composite coating exhibited a better effect in promoting osteogenic differentiation among all samples by simultaneously providing the appropriate biochemical cues and electrophysiological microenvironments. This work demonstrates the feasibility of synergistic pro-osteogenesis by biochemical cues and an electrophysiological microenvironment, which is instructive for the field of bone tissue engineering. Full article

In this study, platinum (Pt) nanocatalysts were synthesized via a sol-gel method over the non-stoichiometric, Magnéli phase titanium oxides (TinO_2n−1) at varying Pt loadings (10–40 wt.%). Their structural and morphological properties were characterized, and after preliminary electrochemical screening, the catalysts were integrated into commercially available gas diffusion electrodes (GDEs) with a three-layer structure to enhance mass transport and catalyst utilization. Membrane electrode assemblies (MEAs) were fabricated using a Nafion^® 117 polymer membrane and tested in a laboratory PEM cell under controlled conditions. The electrochemical activity toward the hydrogen reduction reaction (HRR) was evaluated at room temperature and at elevated temperatures to determine the catalytic efficiency and stability. The optimal Pt loading was determined to be 30 wt.%, achieving a current density of approximately 0.12 A cm⁻² at 0.25 V, demonstrating a balance between catalyst efficiency and material utilization. The chronoamperometry tests showed minimal degradation over prolonged operation, suggesting that the catalysts were durable. These findings highlight the potential of Pt-based catalysts supported on Magnéli phase titanium oxides (TinO_2n−1) for efficient HRRs in electrochemical hydrogen pumps/compressors, offering a promising approach for improving hydrogen compression efficiency and advancing sustainable energy technologies. Full article

To address the challenge of detecting low-frequency electric field signals from vessels in complex marine environments, a vessel shaft frequency electric field feature extraction method based on intrinsic mode function energy arrangement entropy values is proposed, building upon a scaled model. This study initially establishes a measurement system for shaft frequency electric fields, utilizing a titanium-based oxide electrode to construct an equivalent dipole source simulating the shaft frequency electric field signals of different types of vessels. Subsequently, a comparative analysis of the time-domain and frequency-domain characteristics of signals after modal decomposition is conducted. A feature extraction method is then proposed that combines the maximum average energy of intrinsic mode functions with arrangement entropy values to achieve discrimination of target signals. Finally, the feasibility of the proposed method is validated through sea trials. The results indicate that the method can successfully screen different types of typical vessels and address the target screening failure caused by slight differences in the characteristic parameters of the shaft frequency electric field signal. The entropy difference has been improved from 0.05 to about 0.2, and the difference rate of the shaft frequency electric field signal has been improved by 75%. This has effectively reduced the false alarm rate of target detection. Full article

The gate reliability issues in SiC-based devices with a gate dielectric formed through heat oxidation are important factors limiting their application in power devices. Aluminum oxide (Al₂O₃) and titanium dioxide (TiO₂) were combined using the ALD process to form a composite AlTiO gate dielectric on a 4H-SiC substrate. TDMAT and TMA were the precursors selected and deposited at 200 °C, and the samples were Ar or N₂ annealed at temperatures ranging from 300 °C to 700 °C. An XPS analysis suggested that the AlTiO film had been deposited with a high overall quality and the involvement of Ti atoms had increased the interfacial bonding with the substrate. The as-deposited MOS structure had band shifts of ΔE_C = 1.08 eV and ΔE_V = 2.41 eV. After annealing, the AlTiO bandgap increased by 0.85 eV at most, and better band alignment was attained. Leakage current and breakdown voltage characteristic investigations were conducted after Al electrode deposition. The leakage current density and electrical breakdown field of an MOS capacitor structure with a SiC substrate were ~10⁻³ A/cm² and 6.3 MV/cm, respectively. After the annealing process, both the measures of the JV performance of the MOS capacitor had improved to ~10⁻⁶ A/cm² and 7.2 MV/cm. The interface charge N_eff of the AlTiO layer was 4.019 × 10¹⁰ cm⁻². The AlTiO/SiC structure fabricated in this work proved the feasibility of adjusting the properties of single-component gate dielectric materials using the ALD method, and using a suitable thermal annealing process has great potential to improve the performance of the compound MOS dielectric layer. Full article

Cortisol is a key biomarker for stress detection, and its levels can be monitored using point-of-care devices with sensors such as nanoparticles and interdigitated array electrodes (IDEs). This study developed an IDE platform using barium titanate (BaTiO₃) particles synthesized via colloidal precipitation with titanium tetraisopropoxide, barium chloride, and Pluronic^® P123. The calcination temperatures varied between 160 °C and 340 °C, with optimal results observed at 160 °C. Scanning electron microscopy revealed particles with an average size of 26 nm, and Fourier transform infrared spectroscopy confirmed the molecular composition after the removal of P123. X-ray diffraction analysis revealed anatase and brookite phases. Brunauer-Emmett-Teller analysis indicated changes in pore morphology, with samples treated at 160 °C exhibiting a type IV(a) mesoporous structure, a surface area of 163 m²/g, and an average pore diameter of 5.24 nm. Higher temperatures led to transitions to type IV(b) at 260 °C and type V at 340 °C, with reduced pore size. Electrochemical impedance spectroscopy was employed to evaluate the performance of the IDE sensor integrated with BaTiO₃ nanoparticles and albumin across cortisol concentrations ranging from 5.0 to 20 ng/mL. Impedance measurements revealed a significant decrease in impedance (Z′) with increasing cortisol concentrations, indicating increased conductivity. Specifically, Nyquist plots for a saliva sample containing 5 ng/mL cortisol—within the typical physiological range—exhibited a marked increase in charge-transfer resistance (Rct), confirming the sensor’s ability to detect low hormone levels in biological fluids. These findings underscore the potential of BaTiO₃-based IDE platforms at 160 °C for stress biomarker monitoring. Full article

The present study demonstrates, for the first time, the fundamental possibility of producing electrode materials for sodium-ion batteries through low-temperature carbothermic smelting of ilmenite concentrate fluxed with calcined soda and diatomite, followed by aqueous refining of titanium slag. The primary phase composition of the slag includes Na₂Ti₃O₇ (48.2%), Na_0.23TiO₂ (22.0%), Na₂TiSiO₅ (11%), and Na_0.67Al_0.1Mn_0.9O₂ (8.5%), which, upon hydrolysis, transform into a monophase titanium dioxide with intercalated sodium—Na_0.23TiO₂. Thermodynamic analysis of the heat effects of chemical reactions among raw materials and resulting products substantiates the role of silicon and sodium oxides, carbon, oxygen, and water in the formation of various electrode materials during carbothermic flux conversion and aqueous refining. Insights into the mechanisms of thermochemical formation and hydrothermal phase transformations offer a scientific basis for the development of intercalation systems from abundant and low-cost natural raw materials, bypassing the need for expensive precursor synthesis. Full article

Objective: This study evaluated the effectiveness of a new cold atmospheric plasma device (AmbiJet) for eradicating mature oral biofilm on titanium implant surfaces, aiming to improve decontamination methods for the treatment of peri-implant infections. Material and methods: Mature oral biofilms were grown on titanium disks placed in participants’ mouths. These disks were divided into control and plasma treatment groups. The AmbiJet device delivered plasma directly to the implant surface for 3 min per 20 mm², utilizing the applicator nozzle and implant as electrodes. Biofilm reduction was quantified by counting colony-forming units (CFUs). Results: Cold plasma treatment rendered approximately 90% of samples bacteria-free. A > 6-log₁₀ reduction (≈99.9999%) in bacterial load was achieved in 30% of samples, with an overall average reduction of 4.9-log₁₀ across all treated samples. The temperature during treatment remained below 40 °C. Conclusions: Within the study’s limitations, cold atmospheric plasma effectively eradicates mature oral biofilm on titanium surfaces. This high disinfection efficacy is likely due to the combined action of reactive species and electrical phenomena, which does not cause significant temperature increases. Full article

Uneven local electric fields and limited nucleation sites at the reaction interface can lead to the formation of hazardous lithium (Li) dendrites, posing a significant safety risk and impeding the practical utilization of Li metal anodes (LMAs). Here, we present a method utilizing atomic layer deposition (ALD) to create lithiophilic titanium nitride (TiN) sites on carbon nanotubes (CNTs) surfaces, integrated with nanocellulose to form a lithiophilic interlayer (NFCP@TN). This interlayer, which is highly flexible and electrolyte-wettable, functions as a current collector and host material for LMAs. The uniform deposition of Li is facilitated by the synergistic interplay of the lithiophilic active sites TiN, the conductive CNT network, and excellent electrolyte wettability of nanocellulose. As a result, Li preferentially adsorbs on TiN sheaths with lower diffusion barriers, leading to controlled nucleation sites and dendrite-free Li deposition. Furthermore, the well-designed NFCP@TN interlayer exhibits exceptional electrochemical performance and significantly extended cycle life when paired LMA with high areal capacity NCM811 (5.0 mAh cm⁻²) electrodes. Full article

Recently, integral electric hot incremental forming technology has been proposed to form hard-to-form sheet metals and to eliminate some defects obtained through the local heating method via current, such as inhomogeneous temperature distribution, arc burns for the sheet and the tool, unsuitability for multistage forming, etc. However, the simulation of integral electric hot incremental forming involves coupled electro-thermal-mechanical analysis, which is difficult through existing simulation software. Meanwhile, the effect of the electrode structure on temperature distribution is not clear; therefore, a preheating flux model for Joule heat was proposed to simulate the temperature distribution of Ti-6Al-4V titanium alloy sheet in this work, which could simplify the coupled electro-thermal-mechanical analysis to the coupled thermal–mechanical simulation. Meanwhile, the effect of the electrode section and length on the temperature distribution was analyzed in detail, and then a design criterion for the electrode length was obtained during integral electric hot incremental forming. Full article

In order to reduce space occupation and improve reliability, the modularization and integration of micro switches and their components are a necessary path for development. In this paper, a scheme for an alloy metal inertial micro switch using 3D printing technology is proposed for an integrated design. The switch realizes the turn-on function by causing the deformable electrodes to undergo plastic deformation and make close contact with the outer sleeve under the columnar block extrusion. The influence of electrode structure parameters on electrode contact performance was studied by the orthogonal experimental method. And the best parameter combination scheme for the electrode was determined. The aluminum alloy switch and titanium alloy switch were processed by SLM (selective laser melting) technology. The plastic deformation of the 3D-printed titanium alloy electrode occurred later than that of the 3D-printed aluminum alloy electrode under the same impact. The aluminum alloy electrode underwent plastic deformation and realized stable contact with a response time of 5 µs when the impact load was applied with an amplitude of 627 N and a pulse width of 2.7 ms (simulating high acceleration), which meets the application requirement of the response time being no more than 20 µs. The feasibility of 3D printing technology in high-precision and complex-structure micro switch manufacturing was verified. The research in this paper will provide guidance and reference for engineering applications. Full article

An electrochemically active and promising binary composite that is made up of titanium-based MXene (Ti₃C₂T_x) and rGO is developed to simultaneously detect the Cd²⁺ and Cu²⁺, in water. XRD, FTIR, Raman, XPS, FESEM, elemental mapping, and EDX analysis affirmed the successful formation of the Ti₃C₂T_x-rGO composite. The produced Ti₃C₂T_x-rGO electrode exhibited a homogeneous rGO sheet covering the Ti₃C₂T_x MXene plates with all the detailed Ti2p, C1s, and O1s XPS peaks. The high-performance Ti₃C₂T_x-rGO composite was successfully tested for the Cd²⁺ and Cu²⁺ ions via differential pulse voltammetry (DPV), altering the pH, concentration, and the real water sample’s quality. The electrochemical performances revealed that the proposed Ti₃C₂T_x-rGO composite depicted excellent detection and quantification limits (LOD and LOQ) for both Cd²⁺ (LOD = 0.31 nM, LOQ = 1.02 nM) and Cu²⁺ (LOD = 0.18 nM, LOQ = 0.62 nM) ions, where the result is highly comparable with the reported literature. The Ti₃C₂T_x-rGO was proven highly sensitive towards Cd²⁺ (0.345 μMμA⁻¹) and Cu²⁺ (0.575 μMμA⁻¹) with great repeatability and reproducibility properties. The Ti₃C₂T_x-rGO electrode also exhibited excellent stability over four weeks with a retention of 97.86% and 98.01% for Cd²⁺ and Cu²⁺, respectively. This simple modification of Ti₃C₂T_x with rGO can potentially be advantageous in the development of highly sensitive electrochemical sensors for the simultaneous detection of heavy metal ions. Full article

We present a corrosion-resistant quadrupole ion trap mass spectrometer (QIT-MS) for the direct detection of biosignature gasses in chemically reactive planetary atmospheres, such as Venusian clouds. The system employs a Paul trap with hyperbolic titanium alloy electrodes and alumina spacers for chemical durability and precise ion confinement. An yttria-coated iridium filament serves as the thermionic emitter within a modular electron gun capable of axial and radial ionization. Analytes are introduced through fused silica capillaries and crescent inlets into a miniature pressure cell. The testbed integrates high-voltage RF electronics, pressure-regulated sample delivery, and FPGA-based control for real-time tuning. Continuous operation in 98% sulfuric acid vapor for over three months demonstrated no degradation in emitter or sensor performance. Mass spectra revealed H₂SO₄ fragmentation and thermally induced decomposition up to 425 K. Spectral variations with filament current and electron energy highlight thermal and electron-induced dissociation dynamics. Operational modes include high-resolution scans and selective ion ejection (e.g., CO₂⁺, N₂⁺) to enhance the detection of PH₃⁺, H₂S⁺, and daughter ions. The compact QIT-MS platform is validated for future missions targeting corrosive atmospheres, enabling in situ astrobiological investigations through the detection of biosignature gasses such as phosphine and hydrogen sulfide. Full article