Search Results (62)

Increasing environmental pollution has intensified the focus on sustainability, encouraging the development of eco-friendly materials. This study reports the synthesis of binary (ZnO–TiO₂) and ternary (SnO₂–ZnO–TiO₂) compounds and their loading with Au/Ag/Pt/P noble metals (NMs) to enhance photodegradation efficiency under visible light compared to pristine TiO₂. The compounds were synthesized in a single step via laser pyrolysis, and then noble metal deposition through chemical impregnation and reduction was performed. Structural and morphological analyses revealed TiO₂-based nanoparticles with varied morphologies decorated with noble metal nanoparticles with sizes between 2 and 6 nm (for Pt and Pd). Photocatalytic tests demonstrated a significant improvement in Methyl Orange (MO) degradation under visible light, especially for Ag-loaded samples. The degradation rate increased from 1.03 × 10⁻³ min⁻¹ (TZ) to 22.65 × 10⁻³ min⁻¹ (TZS_Ag), while it was 0.09 × 10⁻³ min⁻¹ for the commercial P25 sample. Biocompatibility assays indicated lower cytotoxicity than Degussa P25, with Au- and Pd-loaded samples showing improved compatibility with HaCaT and HEK293 cells. Overall, these findings demonstrate that the developed TiO₂-based nanocomposites, designed through a novel and sustainable strategy combining binary/ternary heterostructures with noble metal loading, are promising candidates for efficient visible light-driven photocatalytic environmental decontamination with enhanced biological compatibility. Full article

Water pollution caused by antibiotics is a growing problem. Therefore, photodegradation by efficient catalysts is an environmentally friendly technology that can effectively degrade organic pollutants in water. In this work, a method was innovatively used to prepare a ternary heterostructure of plasmon-enhanced Ag-CuO/TiO₂. The composite was synthesized through a facile stepwise strategy involving the formation of CuO nanorods, TiO₂ coating, and subsequent deposition of Ag nanoparticles on their surface using AgNO₃, enabling intimate interfacial contact among the different components. The prepared samples were characterized by XRD, HRTEM, XPS, and UV-Vis. The chemical composition of the composite Ag-CuO/TiO₂ showed a Cu/Ti atomic ratio of 2.58, as well as a Ag/Cu ratio of 0.91. The UV-Vis spectrum reveals the largest absorption peak at 550 nm for the composite Ag-CuO/TiO₂. The prepared Ag-CuO/TiO₂ composites were applied to the visible-light degradation of tetracycline hydrochloride, with the photocatalytic degradation rate reaching 80.7% under the optimal conditions within 60 min, which is significantly better than CuO and CuO/TiO₂ without silver nanoparticles. Capture experiments indicated that h⁺ are involved during the course of the photodegradation and that h⁺ are the main active substances. Furthermore, the proposed mechanism for the photodegradation of the Ag-CuO/TiO₂ composites is given. It has potential applications in the treatment of organic pollutants in water. Full article

The reasonable structural design and interfacial modification of heterojunction photocatalysts for accelerated charge separation and boosting photocatalytic activity remains a crucial challenge in solar-driven water splitting for H₂ production. Herein, a hierarchical structured In₂S₃/Ti₃C₂/TiO₂ ternary heterojunction was effectively constructed through a facile hydrothermal method integrated with a self-assembly strategy, in which Ti₃C₂ and TiO₂ were loaded on the surface of hierarchical In₂S₃ microspheres assembled from nanosheets. In the photocatalytic system, the in situ electron paramagnetic resonance verifies that the photogenerated charge transfer between In₂S₃ and TiO₂ obeys a typical S-scheme mechanism. Meanwhile, the introduction of Ti₃C₂ MXene as a conductive cocatalyst further promotes the separation and transfer of photogenerated charge through the formation of a Schottky junction, thus remarkably boosting the photocatalytic performance. Under simulated sunlight irradiation, the In₂S₃/Ti₃C₂/TiO₂ ternary heterojunction exhibits a superior H₂ production rate compared to pure TiO₂ and In₂S₃. Moreover, the ternary heterojunction also displays outstanding stability after five consecutive cycling tests. This work highlights the synergistic integration of an S-scheme and Schottky junction in a ternary heterostructure for efficient charge separation, providing a feasible strategy for designing high-performance photocatalysts toward solar-driven H₂ production. Full article

Active and cost-effective catalysts are essential for obtaining high hydrogen evolution activity. In this paper, we report ZnO/ZnLDH/ZnLDO as a novel ternary Zn²⁺-based heterostructure obtained via the partial structural reconstruction of Zn-based layered double hydroxides (LDH) in a Zn²⁺-containing solution and evaluate its catalytic performance in hydrogen evolution under solar light. The reconstruction strategy induces the formation of a ZnLDH/ZnLDO platform decorated with small ZnO nanoparticles (~3 nm) that are generated in situ during the reconstruction process. The catalysts were extensively characterized for their structure and morphology by XRD, SEM, and TEM/HRTEM, while XPS analysis reveals electronic modulation across the interfaced units. For photocatalytic H₂ evolution under simulated solar light, the optimized ZnO/ZnLDH/ZnLDO (x = 15%) achieves the highest performance with a hydrogen evolution rate of 1.8 mmol h⁻¹ gcat⁻¹, outperforming the individual (ZnLDH, ZnLDO) and binary (ZnO/ZnLDH, ZnO/ZnLDO) catalysts. The enhanced activity is attributed to cascade-type charge transfer across the ternary Zn²⁺-based structures, which promotes efficient charge separation. However, excessive reconstruction (high x%) or high-temperature calcination alter the LDH/LDO balance, resulting in decreased photocatalytic activity. This work provides a new idea for designing active multiple interfaced heterostructured photocatalysts by using the partial reconstruction of LDH as a facile and cost-effective approach. Full article

A ternary CdS–MoS₂–rGO photocathode was developed to enhance visible light-driven hydrogen evolution through interfacial heterostructure engineering. The composite was fabricated via a solution-based deposition method followed by thermal conversion, resulting in crystalline CdS and MoS₂ phases that were uniformly integrated within a conductive reduced graphene oxide (rGO) framework. Structural and surface analyses (XRD and XPS) confirmed the coexistence of Cd²⁺, Mo⁴⁺, and S²⁻ chemical states without detectable secondary phases. Photoelectrochemical measurements revealed that the ternary architecture significantly improves charge separation efficiency and interfacial charge-transfer kinetics compared to binary and single-component films. The CdS–MoS₂–rGO photocathode exhibited the highest photocurrent density, reduced charge-transfer resistance, and favorable Tafel slope under visible-light irradiation (0.25 sun, neutral electrolyte). Gas chromatography measurements verified that these electrochemical enhancements translate into increased hydrogen production rates, following the trend: CdS–MoS₂–rGO > CdS–rGO > MoS₂–rGO >> rGO. Applied bias photon-to-current efficiency (ABPE) analysis further confirmed improved photon utilization efficiency in the ternary system. The enhanced performance is attributed to synergistic integration of CdS (light harvesting), rGO (rapid electron transport), and MoS₂ (catalytic edge sites), which suppresses recombination and accelerates proton reduction kinetics. These findings demonstrate that rational multi-component heterostructure design is an effective strategy for improving hydrogen evolution rate under mild operating conditions. Full article

The construction of heterostructures has been recognized as an effective strategy for enhancing material activity and stability. Herein, a ternary heterojunction FeSe₂-BiSe₂-CoSe₂ was synthesized via a hydrothermal selenidation reaction. The significant electronegativity difference between Bi and Fe/Co triggers charge transfer within the FeSe₂-BiSe₂-CoSe₂ lattice. Furthermore, the abundant pore structure of FeSe₂-BiSe₂-CoSe₂ provides efficient pathways for electron diffusion, significantly enhancing the HER catalytic kinetics. Results demonstrate that FeSe₂-BiSe₂-CoSe₂ exhibits outstanding HER activity in both acidic and alkaline media. In 0.5 M H₂SO₄, it exhibits an overpotential of only 44 mV with a Tafel slope of 108 mV dec⁻¹. In 1 M KOH, the corresponding overpotential is 188 mV, with a Tafel slope of 45 mV dec⁻¹ at 10 mA cm⁻². This study constructs electron-rich active sites through electronic structure regulation, providing valuable insights for designing low-cost, high-performance transition metal selenide HER catalysts. Full article

Hetero-multicomponent metal oxide catalysts are attracting increasing attention for wastewater remediation due to their tunable band structures, synergistic redox activity, and enhanced stability. This review thoroughly evaluates recent progress in the synthesis and application of such catalysts, highlighting Ti–Cu–Zn nanostructures as a representative case study. We examine synthesis approaches—including hydrothermal, biosynthesis, precipitation, and spray-based methods, with additional insight into sol–gel and other less commonly applied techniques—with emphasis on their suitability for constructing layered and multicomponent heterostructures. Mechanistic aspects of photocatalysis, Fenton and Fenton-like processes, adsorption, and electrochemical routes are discussed, with particular focus on charge separation, reactive oxygen species (ROS) generation, and pollutant-specific degradation pathways. Comparative performance metrics against antibiotics, pesticides, dyes, and fertilizers are analyzed, alongside considerations of leaching, reusability, and scale-up potential. Importantly, while significant progress has been made for organic micropollutants, applications in heavy metal remediation remain scarce, highlighting an urgent research gap. By situating Ti–Cu–Zn systems within the broader class of multicomponent catalysts, this review not only synthesizes current advances but also identifies opportunities to expand their role in sustainable wastewater management, including field deployment, regulatory compliance, and integration into decentralized treatment systems. Full article

Electrocatalytic CO₂ reduction driven by renewable electricity offers a sustainable approach to producing valuable chemicals, though it is often hindered by low activity and selectivity. CuO, an important transition metal oxide, exhibits unique advantages in photoelectrocatalysis due to its high intrinsic catalytic activity and ability to serve as an active site for CO₂ reduction. SiO₂, a widely used substrate, facilitates Cu loading and increases the specific surface area of the catalyst. Meanwhile, g-C₃N₄ provides excellent visible-light responsiveness and efficient charge carrier mobility. Together, CuO, SiO₂, and g-C₃N₄ are earth-abundant, low-cost, and chemically stable, making them ideal for solar-to-fuel applications. Here, a novel ternary heterojunction photocatalyst was constructed using SiO₂, CuO, and g-C₃N₄. The heterostructure significantly improves light-harvesting efficiency, promotes efficient charge separation and transport, and simultaneously mitigates photogenerated carrier recombination and catalyst corrosion. The resulting SiO₂@CuO/g-C₃N₄ catalyst demonstrates outstanding CO₂ conversion performance, achieving a CO yield of 17 mmolg⁻¹h⁻¹ at 1.2 V_RHE with nearly 100% selectivity. Moreover, this work systematically investigates the electrocatalytic CO₂ reduction reaction (CO₂RR) mechanism on Cu-based catalysts, offering insights into the formation of high-value multicarbon products and highlighting the potential of rational heterojunction design in enhancing solar-driven fuel production efficiency. Full article

Persistent reactive azo dyes released from textile finishing are a serious threat to water systems, but effective methods using sunlight to break them down are still limited. Everzol Yellow 3RS (EY-3RS) is particularly recalcitrant: past studies have relied almost exclusively on physical adsorption onto natural or modified clays and zeolites, and no photocatalytic pathway employing engineered nanomaterials has been documented to date. This study reports the synthesis, characterization, and performance of a visible-active ternary nanocomposite, Cu₄O₃/ZrO₂/TiO₂, prepared hydrothermally alongside its binary (Cu₄O₃/ZrO₂) and rutile TiO₂ counterparts. XRD, FT-IR, SEM-EDX, UV-Vis, and PL analyses confirm a heterostructured architecture with a narrowed optical bandgap of 2.91 eV, efficient charge separation, and a mesoporous nanosphere-in-matrix morphology. Photocatalytic tests conducted under midsummer sunlight reveal that the ternary catalyst removes 91.41% of 40 ppm EY-3RS within 100 min, markedly surpassing the binary catalyst (86.65%) and TiO₂ (81.48%). Activity trends persist across a wide range of operational variables, including dye concentrations (20–100 ppm), catalyst dosages (10–40 mg), pH levels (3–11), and irradiation times (up to 100 min). The material retains ≈ 93% of its initial efficiency after four consecutive cycles, evidencing good reusability. This work introduces the first nanophotocatalytic strategy for EY-3RS degradation and underscores the promise of multi-oxide heterojunctions for solar-driven remediation of colored effluents. Full article

A novel catalyst with a metal sulfide/hydroxide heterostructure was prepared by introducing sulfur ions into NiMnFe layered hydroxide by a simple hydrothermal method, using a series of characterization methods and electrochemical tests to explore the optimal sulfur ion doping amount. The XPS results show that the introduction of sulfur ions leads to a change in metal electron delocalization, which is conducive to the OER procedure. The newly formed metal sulfide can not only improve the conductivity of NiMnFe LDH/NF electrode materials but also enhance the intrinsic catalytic activity of the materials. The electrochemical performance indicated that the S₂-NiMnFe LDH/NF catalyst required only 205 mV overpotential to provide a current density of 10 mA⁻², and the Tafel slope was only 45.79 mV dec⁻¹. In addition, the large turnover frequency value (1.2614 S⁻¹) reflects the excellent intrinsic activity of the novel catalytic material. Full article

Both ZnO and BeO semiconductors crystallize in the hexagonal wurtzite (wz), cubic rock salt (rs), and zinc-blende (zb) phases, depending upon their growth conditions. Low-dimensional heterostructures ZnO/Be_xZn_1-xO and Be_xZn_1-xO ternary alloy-based devices have recently gained substantial interest to design/improve the operations of highly efficient and flexible nano- and micro-electronics. Attempts are being made to engineer different electronic devices to cover light emission over a wide range of wavelengths to meet the growing industrial needs in photonics, energy harvesting, and biomedical applications. For zb materials, both experimental and theoretical studies of lattice dynamics ${\mathsf{\omega }}_{\mathrm{j}}\left(\overrightarrow{\mathrm{q}}\right)$ have played crucial roles for understanding their optical and electronic properties. Except for zb ZnO, inelastic neutron scattering measurement of ${\mathsf{\omega }}_{\mathrm{j}}\left(\overrightarrow{\mathrm{q}}\right)$ for BeO is still lacking. For the Be_xZn_1-xO ternary alloys, no experimental and/or theoretical studies exist for comprehending their structural, vibrational, and thermodynamical traits (e.g., Debye temperature ${\mathsf{\Theta }}_{\mathrm{D}}\left(\mathrm{T}\right);$ specific heat ${\mathrm{C}}_{\mathrm{v}}\left(\mathrm{T}\right))$. By adopting a realistic rigid-ion model, we have meticulously simulated the results of lattice dynamics, and thermodynamic properties for both the binary zb ZnO, BeO and ternary Be_xZn_1-xO alloys. The theoretical results are compared/contrasted against the limited experimental data and/or ab initio calculations. We strongly feel that the phonon/thermodynamic features reported here will encourage spectroscopists to perform similar measurements and check our theoretical conjectures. Full article

Rapid charge separation and transfer is the key scientific problem in photocatalysis. The construction of S-scheme heterojunction is one of the effective strategies to promote charge separation and maintain the strong redox properties. Herein, the NiO, K_0.2WO₃, and NiWO₄ ternary double S-scheme K_0.2WO₃/NiO/NiWO₄ heterojunction (W/NiO) was created by a one-step molten salt method. Ultraviolet-visible (UV-Vis) diffuse reflectance spectra, photoluminescence (PL) spectra, photoelectrochemistry tests, and other analyses revealed that the double S-scheme heterostructure broadened the spectral response range of NiO and promoted its separation of photocarriers. Compared with pristine NiO, the modified double S-scheme heterojunction enhanced the surface adsorption of water molecules and the accumulation of intermediate product of HCOO⁻, and optimized the CO₂ reduction system, realizing the improved CO yield of 373 μmol·g⁻¹·h⁻¹ in Ru(byp)₃²⁺/ethanolamine of CO₂ reduction system. This study indicates that double S-scheme heterojunction could facilitate efficient photogenerated charge transfer and separation, thereby achieving high activity and selectivity for CO₂ photoreduction. Our work provides a reference for the one-step construction of double S-scheme heterojunction. Full article

This study presents the fabrication and characterization of highly selective, room-temperature gas sensors based on ternary zinc oxide–molybdenum disulfide–titanium dioxide (ZnO-MoS₂-TiO₂) nanoheterostructures. Integrating two-dimensional (2D) MoS₂ with oxide nano materials synergistically combines their unique properties, significantly enhancing gas sensing performance. Comprehensive structural and chemical analyses, including scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), Raman spectroscopy, and Fourier transform infrared spectroscopy (FTIR), confirmed the successful synthesis and composition of the ternary nanoheterostructures. The sensors demonstrated excellent selectivity in detecting low concentrations of nitrogen dioxide (NO₂) among target gases such as ammonia (NH₃), methane (CH₄), and carbon dioxide (CO₂) at room temperature, achieving up to 58% sensitivity at 4 ppm and 6% at 0.1 ppm for NO₂. The prototypes demonstrated outstanding selectivity and a short response time of approximately 0.51 min. The impact of light-assisted enhancement was examined under 1 mW/cm² weak ultraviolet (UV), blue, yellow, and red light-emitting diode (LED) illuminations, with the blue LED proving to deliver the highest sensor responsiveness. These results position ternary ZnO-MoS₂-TiO₂ nanoheterostructures as highly sensitive and selective room-temperature NO₂ gas sensors that are suitable for applications in environmental monitoring, public health, and industrial processes. Full article

We propose a temperature-dependent optimization procedure for the second-nearest neighbor (2NN) sp³s* tight-binding (TB) theory parameters to calculate the effects of strain, structure dimensions, and alloy composition on the band structure of heterostructure spherical core/shell quantum dots (QDs). We integrate the thermoelastic theory of solids with the 2NN sp³s* TB theory to calculate the strain, core and shell dimensions, and composition effects on the band structure of binary/ternary CdSe/Cd(Zn)S and ZnSe/Zn(Cd)S QDs at any temperature. We show that the 2NN sp³s* TB theory with optimized parameters greatly improves the prediction of the energy dispersion curve at and in the vicinity of L and X symmetry points. We further used the optimized 2NN sp³s* TB parameters to calculate the strain, core and shell dimensions, and composition effects on the nanocrystal bandgaps of binary/ternary CdSe/Cd(Zn)S and ZnSe/Zn(Cd)S core/shell QDs. We conclude that the 2NN sp³s* TB theory provides remarkable agreement with the measured nanocrystal bandgaps of CdSe/Cd(Zn)S and ZnSe/Zn(Cd)S QDs and accurately reproduces the energy dispersion curves of the electronic band structure at any temperature. We believe that the proposed optimization procedure makes the 2NN sp³s* TB theory reliable and accurate in the modeling of core/shell QDs for nanoscale devices. Full article

The development of efficient and sustainable photocatalysts for wastewater treatment remains a critical challenge in environmental remediation. In this study, a ternary photocatalyst, Cu-Cu₂O/g-C₃N₄, was synthesized by embedding copper-copper oxide heterostructural nanocrystals onto g-C₃N₄ nanosheets via a simple deposition method. Structural and optical characterization confirmed the successful formation of the heterostructure, which combines the narrow bandgap of Cu₂O, the high stability of g-C₃N₄, and the surface plasmon resonance (SPR) effect of Cu nanoparticles. The photocatalytic performance was evaluated through the degradation of Rhodamine B (RhB) in a photo-Fenton-like reaction system under visible light irradiation. Among the catalysts tested, the 30 wt% Cu-Cu₂O/g-C₃N₄ composite exhibited the highest catalytic efficiency, achieving a reaction rate constant approximately 3 times and 1.5 times higher than those of Cu-Cu₂O and g-C₃N₄, respectively. Mechanistic studies suggest that the heterostructure facilitates efficient charge separation and promotes the reduction of Cu²⁺ to Cu⁺, thereby enhancing ∙OH radical generation. The catalyst also demonstrated excellent stability and reusability across a wide pH range. These findings provide a new strategy for designing highly efficient photocatalysts for organic pollutant degradation, contributing to the advancement of advanced oxidation processes for environmental applications. Full article