Search Results (45)

Monitoring biodiversity in coastal and marine ecosystems is essential for supporting conservation strategies, sustaining ecosystem services, and meeting policy commitments at multiple scales, including the European Union’s Habitats Directive, Sustainable Development Goal 14 (SDG 14, Life Below Water), and the Kunming–Montreal Global Biodiversity Framework (GBF). However, many benthic habitats remain insufficiently mapped or monitored due to the spatial, temporal, and logistical limitations of traditional field-based approaches. Optical Remote Sensing (ORS), based on the use of optical sensors to retrieve spectral information from shallow-water environments, has emerged as a powerful tool for mapping and monitoring these ecosystems. This study presents a systematic review aimed at providing a comprehensive synthesis of above-water ORS applications for benthic biodiversity and habitat monitoring over the period 2014–2023. A total of 179 peer-reviewed studies were analyzed to identify temporal trends, geographic patterns, target ecosystems, and methodological workflows. The review considered observation platforms including satellite, airborne, unmanned aerial vehicles (UAVs), and field spectrometry systems, together with key preprocessing procedures required for reliable benthic detection, such as atmospheric correction, water column correction, and sunglint removal, alongside validation using independent measurements. The analysis reveals a rapid expansion of ORS applications, with a strong geographic concentration in tropical and subtropical regions. Studies focusing on specific benthic groups predominantly target coral reefs and seagrass ecosystems, although many adopt integrative benthic habitat classifications that incorporate multiple benthic components at the habitat level. However, significant limitations persist, including inconsistent preprocessing workflows, limited reporting transparency, and the underrepresentation of several ecologically important taxa (e.g., annelids, mollusks, echinoderms). Despite these challenges, ORS has become a cornerstone of large-scale and repeatable coastal monitoring. By analyzing methodological practices, ecological targets, and geographic biases, this review provides a critical foundation for improving the robustness, scalability, and global applicability of ORS in benthic habitat mapping, biodiversity monitoring, and ecosystem-based management. Full article

Satellite-derived bathymetry (SDB) offers a practical alternative for mapping shallow reefs in remote oceanic settings where acoustic surveys are costly and logistically constrained. Here we benchmark PlanetScope 8-band (3 m) surface reflectance—an underused commercial constellation for reef SDB—using ICESat-2 Advanced Topographic Laser Altimeter System (ATLAS) ATL03 photon data (Release 006) as independent vertical control. Seventeen ATL03 ground tracks (2019–2025) were processed using geometric filtering, photon classification, and explicit air–water refraction correction. This yielded 5171 candidate seafloor observations, of which 5021 were co-located with valid PlanetScope water pixels after Usable Data Mask screening (UDM2/UDM2.1), sun-glint correction, and reflectance quality screening. Four SDB formulations (Lyzenga, Bierwirth, and Stumpf) were calibrated and independently validated using depth-stratified train/validation partitions (70/30, 80/20, and 90/10). Across partitions, the multiband polynomial model of Lyzenga 2006 generalized best (R² = 0.843–0.859; RMSE = 1.734–1.813 m; bias = −0.070 to −0.081 m), followed by Bierwirth (R² = 0.826–0.845; RMSE = 1.818–1.904 m). Lyzenga 1985 reported lower skill (RMSE ≈ 3.1 m), while the Stumpf log-ratio failed in independent validation. ICESat-2 photon bathymetry provides repeatable point-based control in clear waters but remains less precise than echo sounding due to photon classification and spatial-support effects; therefore, uncertainties and applicability limits must be reported. Overall, PlanetScope 3 m, 8-band surface reflectance supports reproducible reef-scale SDB in Seaflower under the evaluated conditions, with Lyzenga 2006 as a robust baseline. Full article

Coastal sandbars play a crucial role in shoreline protection, yet monitoring their dynamics remains challenging due to the cost and limited temporal coverage of traditional surveys. This study assesses the feasibility of using Sentinel-2 multispectral imagery combined with the logarithmic band ratio method to automatically detect submerged sandbar crests along three morphologically distinct beaches on the northwestern Mediterranean coast. Pseudo-bathymetry was derived from log-transformed band ratios of blue-green and blue-red reflectance used to extract the sandbar crest and validated against high-resolution in situ bathymetry. The blue-green band ratio achieved higher accuracy than the blue-red band ratio, which performed slightly better in very shallow waters. Its application across single, single/double, and double shore-parallel bar systems demonstrated the robustness and transferability of the approach. However, the method requires relatively clear or calm water conditions, and breaking-wave foam, sunglint, or cloud cover conditions limit the number of usable satellite images. A temporal analysis at a dissipative beach further revealed coherent bar migration patterns associated with storm events, consistent with observed hydrodynamic forcing. The proposed method is cost-free, computationally efficient, and broadly applicable for large-scale and long-term sandbar monitoring where optical water clarity permits. Its simplicity enables integration into coastal management frameworks, supporting sediment-budget assessment and resilience evaluation in data-limited regions. Full article

The Directional Polarimetric Camera (DPC) onboard the Gaofen-5 (02) satellite includes gas absorption bands that are crucial for the quantitative retrieval of clouds, atmospheric aerosols, and surface parameters. However, in-flight radiometric calibration of these bands remains challenging due to strong absorption features and the lack of onboard calibration devices. In this study, a calibration method that exploits functional relationships between the reflectance ratios of gas absorption and adjacent reference bands and key surface–atmosphere parameters over sunglint were presented. Radiative transfer simulations were combined with polynomial fitting to establish these relationships, and prior knowledge of surface pressure and water vapor column concentration was incorporated to achieve high-precision calibration. Results show that the calibration uncertainty of the oxygen absorption band is mainly driven by surface pressure, with a total uncertainty of 3.01%. For the water vapor absorption band, uncertainties are primarily associated with water vapor column concentration and surface reflectance, yielding total uncertainties of 3.45%. Validation demonstrates the robustness of the proposed method: (1) cross-calibration using desert samples confirms the stability of the results, and (2) the retrieved surface pressure agrees with the DEM-derived estimates, and the retrieved total column water vapor agrees with the MODIS products, confirming the calibration. Overall, the method provides reliable in-flight calibration of DPC gas absorption bands on Gaofen-5 (02) and can be adapted to similar sensors with comparable spectral configurations. Full article

The chlorophyll-a (Chl-a) concentration, a critical parameter for characterizing marine primary productivity and ecological health, plays a vital role in providing ecological environment monitoring and climate change assessment while serving as a core retrieval product in ocean color remote sensing. Currently, more than ten ocean color satellites operate globally, including China’s HY-1C, HY-1D and HY-1E satellites. However, significant spatial data gaps exist in Chl-a concentration retrieval from satellites because of cloud cover, sun-glint, and limitation of sensor swath. This study aimed to systematically enhance the spatiotemporal integrity of ocean monitoring data through multisource data merging and reconstruction techniques. We integrated Chl-a concentration datasets from four major sensor types—Moderate Resolution Imaging Spectroradiometer (MODIS), Visible Infrared Imaging Radiometer Suite (VIIRS), Ocean and Land Color Instrument (OLCI), and Chinese Ocean Color and Temperature Scanner (COCTS)—and quantitatively evaluated their global coverage performance under different payload combinations. The key findings revealed that single-sensor 4-day continuous observation achieved effective coverage levels ranging from only 10.45–26.1%, while multi-sensor merging substantially increased coverage, namely, homogeneous payload merging provided 25.7% coverage for two MODIS satellites, 41.1% coverage for three VIIRS satellites, 24.8% coverage for two OLCI satellites, and 37.1% coverage for three COCTS satellites, with 10-payload merging increasing the coverage rate to 55.4%. Employing the Data Interpolating Empirical Orthogonal Functions (DINEOFS) algorithm, we successfully reconstructed data for China’s ocean color satellites. Validation against VIIRS reconstructions indicated high consistency (a mean relative error of 26% and a linear correlation coefficient of 0.93), whereas self-verification yielded a mean relative error of 27% and a linear correlation coefficient of 0.90. Case studies in Chinese offshore and adjacent waters, waters east of Mindanao Island and north of New Guinea, demonstrated the successful reconstruction of spatiotemporal Chl-a dynamics. The results demonstrated that China’s HY-1C, HY-1D, and HY-1E satellites enable daily global-scale Chl-a reconstruction. Full article

Unmanned aerial vehicles (UAVs) are an ideal platform for the remote sensing of riverbeds in small, tree-lined streams, allowing unobstructed viewing of the channel at high spatial resolution. However, effective UAV surveying of these riverbeds is hindered by a range of phenomena associated with the complex light environments of rivers, and small tree-lined streams in particular, including reflections of the overlying cloud layer from the water surface, sunglint on the water surface, and shadows from topography and riparian vegetation. We used UAV imagery acquired from small, tree-lined streams under different light conditions to identify the prevalence of the main phenomena—reflections of clouds, sunglint, and shadows—that hinder the ability to discern the riverbed. We characterized how large a constraint these phenomena are on the optimal imaging window. We then examined the degree to which sub-optimal light conditions may restrict this window, both within the year and within the day, across Europe. Our investigations suggest that different regions across Europe will have different priorities with regard to imaging, with surveys in northern rivers emphasizing avoiding low irradiant intensity in winter and those in southern rivers emphasizing avoiding sunglint around midday. We use our findings to suggest a protocol for improved riverbed imaging that is specific to the light environment of the stream under investigation. Full article

The Sentinel-2 Multi-Spectral Instrument (MSI) is characterized by short revisit times (5 days), red-edge spectral bands (665 nm and 705 nm), and a high spatial resolution (10 m), making it highly suitable for monitoring water quality in both inland and coastal waters. Unlike SeaWiFS, which can adjust its viewing angles to minimize sunglint, the Sentinel-2 MSI operates with fixed near-nadir angles, which makes it more susceptible to sunglint. Additionally, the complex optical properties of water pose challenges in accurately determining its water-leaving reflectance. Therefore, we compared the effectiveness of six atmospheric correction (AC) algorithms (POLYMER, MUMM, DSF, C2RCC, BP, and GRS) in correcting sunglint using two typical lakes in Xinjiang, China, as examples. The results indicated that POLYMER achieved the highest overall evaluation score (1.61), followed by MUMM (1.21), while BP exhibited the lowest performance (0.62). Specifically, POLYMER showed robust performance at the 665 nm band with RMSE = 0.0012 sr⁻¹, R² = 0.74, and MAPE = 30.68%, as well as at the 705 nm band with RMSE = 0.0014 sr⁻¹, R² = 0.42, and MAPE = 38.44%. At the 443, 490, and 560 nm bands, MUMM showed better performance (RMSE ≤ 0.0026 sr⁻¹, R² ≥ 0.86, MAPE ≤ 28.20%). In terms of band ratios, POLYMER exhibited the highest accuracy (RMSE ≤ 0.093 and MAPE ≤ 22.2%), particularly for the ratio R_rs(490)/R_rs(560) (R² = 0.71). In general, POLYMER is the best choice for the sunglint correction of Xinjiang’s clean lakes. This study assessed the capability of different AC algorithms for sunglint correction and enhanced the monitoring capability of MSI data in clean waters. Full article

This study aims to develop and implement a methodology for retrieving bio-optical parameters in a lagoon located in the Biobío region, South-Central Chile, by analyzing time series of Landsat-8 OLI satellite images. The bio-optical parameters, i.e., chlorophyll-a (Chl-a, in mg·m⁻³) and turbidity (in NTU) were measured in situ during a satellite overpass to minimize the impact of atmospheric distortions. To calibrate the satellite images, various atmospheric correction methods (including ACOLITE, C2RCC, iCOR, and LaSRC) were evaluated during the image preprocessing phase. Spectral signatures obtained from the scenes for each atmospheric correction method were then compared with spectral signatures acquired in situ on the water surface. In short, the ACOLITE model emerged as the best fit for the calibration process, reaching R² values of 0.88 and 0.79 for Chl-a and turbidity, respectively. This underlies the importance of using inversion models, when processing water surfaces, to mitigate errors due to aerosols and the sun-glint effect. Subsequently, reflectance data derived from the ACOLITE model were used to establish correlations between various spectral indices and the in situ data. The empirical retrieval models (based on band combinations) yielding superior performance, with higher R² values, were subjected to a rigorous statistical validation and optimization by applying a bootstrapping approach. From this process the green chlorophyll index (GCI) was selected as the optimal choice for constructing the Chl-a retrieval model, reaching an R² of 0.88, while the red + NIR spectral index achieved the highest R² value (0.79) for turbidity analysis, although in the last case, it was necessary to incorporate data from several seasons for an adequate model training. Our analysis covered a broad spectrum of dates, seasons, and years, which allowed us to search deeper into the evolution of the trophic state associated with the lake. We identified a striking eight-year period (2014–2022) characterized by a decline in Chl-a concentration in the lake, possibly attributable to governmental measures in the region for the protection and conservation of the lake. Additionally, the OLI imagery showed a spatial pattern varying from higher Chl-a values in the northern zone compared to the southern zone, probably due to the heat island effect of the northern urban areas. The results of this study suggest a positive effect of recent local regulations and serve as the basis for the creation of a modern monitoring system that enhances traditional point-based methods, offering a holistic view of the ongoing processes within the lake. Full article

Reducing methane, which is the second most important anthropogenic greenhouse gas after carbon dioxide, has been shown to be a good opportunity to mitigate global warming in the short to medium time. Remote sensing is nowadays a useful tool for the identification of anthropogenic emission from methane point sources. In this work, we will demonstrate the capability of high-resolution satellites to detect point sources of methane. Specifically, this study focuses on emissions from offshore oil and gas platforms using sun-glint mode acquisitions, as these platforms represent a significant fraction of total emissions and pose a challenging issue due to the low radiation from water. Full article

The polarization crossfire (PCF) suite carried onboard the Chinese GaoFen-5B satellite is composed of a Particulate Observing Scanning Polarimeter (POSP) and a Directional Polarimetric Camera (DPC), which can provide multi-angle, multi-spectral, and polarization data. In this paper, the influence of polarization and the directionality of reflectance in open oceans on the inversion of chlorophyll a (Chla) concentrations are investigated, from 410 nm to 670 nm. First, we exploit a vector radiative transfer model to simulate the absolute and relative magnitudes of the water-leaving radiance signal (I) and the parallel polarization radiance (PPR) to the top-of-atmosphere (TOA) radiation field. The simulation results show that the PPR can enhance the relative contribution of the water-leaving signal, especially in sunglint observation geometry. The water-leaving signal for PPR exhibits significant directional and spectral variations relative to the observation geometries, and the maximum value of the water-leaving signal for PPR occurs in the backscattering direction. In addition, the sensitivity of the PPR to the Chla concentration is sufficient. The synthetic datasets are utilized to develop retrieval algorithms for the Chla concentrations based on the back-propagation neural network (BPNN). The inversion results show that the PCF strategy improves the accuracy of Chla retrieval, with an RMSE of 0.014 and an RRMSE of 6.57%. Thus, it is an effective method for retrieving the Chla concentration in open oceans, by utilizing both the directionality and polarization of the reflectance. Full article

The spatial and spectral information brought by the Very High Resolution (VHR) and multispectral satellite images present an advantage for Satellite-Derived Bathymetry (SDB), especially in shallow-water environments with dense wave patterns. This work focuses on Tavşan Island, located in the Sea of Marmara (SoM), and aims to evaluate the accuracy and reliability of two machine learning (ML) regression methods, Multi-Layer Perceptron (MLP) and Random Forest (RF), for bathymetry mapping using Worldview-2 (WV-2) imagery. In situ bathymetry measurements were collected to enhance model training and validation. Pre-processing techniques, including water pixel extraction, sun-glint correction, and median filtering, were applied for image enhancement. The MLP and RF regression models were then trained using a comprehensive dataset that included spectral bands from the satellite image and corresponding ground truth depth values. The accuracy of the models was assessed using metrics such as Root-Mean-Square Error (RMSE), Mean Absolute Error (MAE), and R² value. The RF regression model outperformed the MLP model, with a maximum R² value of 0.85, lowest MAE values from 0.65 to 1.86 m, and RMSE values from 0.93 to 2.41 m at depth intervals between 6 and 9 m. These findings highlight the effectiveness of ML regression methods, specifically the RF model, for SDB based on remotely sensed images in wave-dense shallow-water environments. Full article

Marine oil spills pose a crucial concern in the monitoring of marine environments, and optical remote sensing serves as a vital means for marine oil spill detection. However, optical remote sensing imagery is susceptible to interference from sunglints and shadows, leading to diminished spectral differences between oil films and seawater. This makes it challenging to accurately extract the boundaries of oil–water interfaces. To address these aforementioned issues, this paper proposes a model based on the graph convolutional architecture and spatial–spectral information fusion for the oil spill detection of real oil spill incidents. The model is experimentally evaluated using both spaceborne and airborne hyperspectral oil spill images. Research findings demonstrate the superior oil spill detection accuracy of the developed model when compared to Graph Convolutional Network (GCN) and CNN-Enhanced Graph Convolutional Network (CEGCN), across two hyperspectral datasets collected from the Bohai Sea. Moreover, the performance of the developed model in oil spill detection remains optimal, even with only 1% of the training samples. Similar conclusions are drawn from the oil spill hyperspectral data collected from the Yellow Sea. These results validate the efficacy and robustness of the proposed model for marine oil spill detection. Full article

This study investigates the application of unoccupied aerial vehicles (UAVs) equipped with a Micasense RedEdge-MX multispectral camera for the estimation of Secchi depth (SD) in inland water bodies. The research analyzed and compared five sun-glint correction methodologies—Hedley, Goodman, Lyzenga, Joyce, and threshold-removed glint—to model the SD values derived from UAV multispectral imagery, highlighting the role of reflectance accuracy and algorithmic precision in SD modeling. While Goodman’s method showed a higher correlation (0.92) with in situ SD measurements, Hedley’s method exhibited the smallest average deviation (0.65 m), suggesting its potential in water resource management, environmental monitoring, and ecological modeling. The study also underscored the quasi-analytical algorithm (QAA) potential in estimating SD due to its flexibility to process data from various sensors without requiring in situ measurements, offering scalability for large-scale water quality surveys. The accuracy of SD measures calculated using QAA was related to variability in water constituents of colored dissolved organic matter and the solar zenith angle. A practical workflow for SD acquisition using UAVs and multispectral data is proposed for monitoring inland water bodies. Full article

Seagrass is an essential component of coastal ecosystems because of its capability to absorb blue carbon, and its involvement in sustaining marine biodiversity. In this study, support vector machine (SVM) technologies with corrected satellite imagery data, were applied to identify the distribution of seagrasses. Observations of seagrasses from satellite imagery were obtained using GeoEye-1, Sentinel-2 MSI level 1C, and Landsat-8 OLI satellite imagery. The satellite imagery from Google Earth has been obtained at a very high resolution, and was to be used within both the training and testing of a classification method. The optical satellite imagery must be processed for image classification, throughout which radiometric correction, sunglint, and water column adjustments were applied. We restricted the scope of the study area to a maximum depth of 10 m due to the fact that light does not penetrate beyond this level. When classifying the distribution of seagrasses present in the research region, the recently developed SVM technique achieved overall accuracy values of up to 92% (GeoEye-1), 88% (Sentinel-2 MSI level 1C), and 83% (Landsat-8 OLI), respectively. The results of the overall accuracy values are also used to evaluate classification models. Full article

Human activities coupled with climate change impacts are becoming the main factors in decreasing inland surface water quantity and quality, leading to the disturbance of the aquatic ecological balance. Under such conditions, the introduction and proliferation of aquatic invasive alien species are more likely to occur. Hence, frequent surface water quality monitoring is required for aquatic ecosystem sustainability. The main objectives of the present study are to analyze the seasonal variation in the invasive plant species water hyacinth (Pontederia crassipes) and biogeochemical water quality parameters, i.e., chlorophyll-a (Chl-a) and total suspended matter (TSM), and to examine their relationship in Lake Tana (Ethiopia) during a one-year study period (2020). Sentinel-2A/B satellite images are used to monitor water hyacinth expansion and Chl-a and TSM concentrations in the water. The Case 2 Regional Coast Colour processor (C2RCC) is used for atmospheric and sunglint correction over inland waters, while the Sen2Cor atmospheric processor is used to calculate the normalized difference vegetation index (NDVI) for water hyacinth mapping. The water hyacinth cover and biomass are determined by NDVI values ranging from 0.60 to 0.95. A peak in cover and biomass is observed in October 2020, just a month after the peak of Chl-a (25.2 mg m⁻³) and TSM (62.5 g m⁻³) concentrations observed in September 2020 (end of the main rainy season). The influx of sediment and nutrient load from the upper catchment area during the rainy season could be most likely responsible for both Chl-a and TSM increased concentrations. This, in turn, created a fertile situation for water hyacinth proliferation in Lake Tana. Overall, the freely available Sentinel-2 satellite imagery and appropriate atmospheric correction processors are an emerging potent tool for inland water monitoring and management in large-scale regions under a global change scenario. Full article