Search Results (3,837)

Traditional liquid electrolyte batteries face safety concerns such as leakage and flammability, while further optimization has reached a bottleneck. Solid electrolytes are therefore considered a promising solution. Here, a PEO–LiTFSI–LATP (PELT) composite electrolyte was developed by incorporating nanosized Li_1.3Al_0.3Ti_1.7(PO₄)₃ fillers into a polyethylene oxide matrix, effectively reducing crystallinity, enhancing mechanical robustness, and providing additional Li⁺ transport channels. The PELT electrolyte exhibited an electrochemical stability window of 4.9 V, an ionic conductivity of 1.2 × 10⁻⁴ S·cm⁻¹ at 60 °C, and a Li⁺ transference number (tLi+) of 0.46, supporting stable Li plating/stripping for over 600 h in symmetric batteries. More importantly, to address poor electrode–electrolyte contact in conventional layered cells, we proposed an integrated electrode–electrolyte architecture by in situ coating the PELT precursor directly onto LiFePO₄ cathodes. This design minimized interfacial impedance, improved ion transport, and enhanced electrochemical stability. The integrated PELT/LFP battery retained 74% of its capacity after 200 cycles at 1 A·g⁻¹ and showed superior rate capability compared with sandwich-type batteries. These results highlight that coupling LATP-enhanced polymer electrolytes with an integrated architecture is a promising pathway toward high-safety, high-performance solid-state lithium-ion batteries. Full article

Background: The implant–abutment interface has been thoroughly examined due to its impact on the success of implant healing and longevity. Removing the abutment is advantageous, but it changes the biomechanics of the implant fixture and restoration. This in vitro three-dimensional finite element analytical (FEA) study aims to evaluate the distribution of von Mises stress (VMS) in abutment-free and three additional implant abutment connections composed of various titanium alloys. Materials and methods: A three-dimensional implant-supported single-crown prosthesis model was digitally generated on the mandibular section using a combination of microcomputed tomography imaging (microCT), a computer-assisted designing (CAD) program (SolidWorks), Analysis of Systems (ANSYS), and a 3D digital scan (Visual Computing Lab). Four digital models [A (BioHorizons), B (Straumann AG), C abutment-free (Matrix), and D (TRI)] representing three different functional biomaterials [wrought Ti-6Al-4Va ELI, Roxolid (85% Ti, 15% Zr), and Ti-6Al-4V ELI] were subjected to simulated static/cyclic static loading in axial/oblique directions after being restored with highly translucent monolithic zirconia restoration. The stresses generated on the implant fixture, abutment, crown, screw, cortical, and cancellous bones were measured. Results: The highest VMSs were generated by the abutment-free (Model C, Matrix) implant system on the implant fixture [static (32.36 Mpa), cyclic static (83.34 Mpa)], screw [static (16.85 Mpa), cyclic static (30.33 Mpa), oblique (57.46 Mpa)], and cortical bone [static (26.55), cyclic static (108.99 Mpa), oblique (47.8 Mpa)]. The lowest VMSs in the implant fixture, abutment, screw, and crown were associated with the binary alloy Roxolid [83–87% Ti and 13–17% Zr]. Conclusions: Abutment-free implant systems generate twice the stress on cortical bone than other abutment implant systems while producing the highest stresses on the fixture and screw, therefore demanding further clinical investigations. Roxolid, a binary alloy of titanium and zirconia, showed the least overall stresses in different loadings and directions. Full article

Wet–dry cycles are a key factor aggravating the durability degradation of foam concrete. To address this issue, this study prepared bentonite slurry–steel slag foam concrete (with steel slag and cement as main raw materials, and bentonite slurry as admixture) using the physical foaming method. Based on 7-day unconfined compressive strength tests with different mix proportions, the optimal mix proportion was determined as follows: mass ratio of bentonite to water 1:15, steel slag content 10%, and mass fraction of bentonite slurry 5%. Based on this optimal mix proportion, dry–wet cycle tests were carried out in both water and salt solution environments to systematically analyze the improvement effect of steel slag and bentonite slurry on the durability of foam concrete. The results show the following: steel slag can act as fine aggregate to play a skeleton role; after fully mixing with cement paste, it wraps the outer wall of foam, which not only reduces foam breakage but also inhibits the formation of large pores inside the specimen; bentonite slurry can densify the interface transition zone, improve the toughness of foam concrete, and inhibit the initiation and propagation of matrix cracks during the dry–wet cycle process; the composite addition of the two can significantly enhance the water erosion resistance and salt solution erosion resistance of foam concrete. The dry–wet cycle in the salt solution environment causes more severe erosion damage to foam concrete. The main reason is that, after chloride ions invade the cement matrix, they erode hydration products and generate expansive substances, thereby aggravating the matrix damage. Scanning Electron Microscopy (SEM) analysis shows that, whether in water environment or salt solution environment, the fractal dimension of foam concrete decreased slightly with an increasing number of wet–dry cycle times. Based on fractal theory, this study established a compressive strength–porosity prediction model and a dense concrete compressive strength–dry–wet cycle times prediction model, and both models were validated against experimental data from other researchers. The research results can provide technical support for the development of durable foam concrete in harsh environments and the high-value utilization of steel slag solid waste, and are applicable to civil engineering lightweight porous material application scenarios requiring resistance to dry–wet cycle erosion, such as wall bodies and subgrade filling. Full article

The increasing share of renewable energy sources in power grids demands greater load flexibility from thermal power plants. Circulating Fluidized Bed (CFB) combustion systems, while offering fuel flexibility and high thermal inertia, face challenges in maintaining hydrodynamic and thermal stability during load transitions. This study investigates partial flue gas recirculation (FGR) as a strategy to enhance short-term load flexibility in a 1 MW_th CFB pilot plant fired exclusively with solid recovered fuel. Two experimental test series were conducted. Under conventional operation, where fuel and fluidization air are reduced proportionally, load reductions to 86% and 80% led to operating regime shift. Particle entrainment from the riser to the freeboard and loop seal decreased, circulation weakened, and the temperature difference between bed and freeboard zone increased by 71 K. Grace diagram analysis confirmed that the system approached the boundary of the circulating regime. In contrast, the partial FGR strategy maintained total fluidization rates by replacing part of the combustion air with recirculated flue gas. This stabilized pressure conditions, sustained particle circulation, and limited the increase in the temperature difference to just 7 K. Heat extraction in the freeboard remained constant or improved, despite slightly lower flue gas temperatures. While partial FGR introduces a minor efficiency loss due to the reheating of recirculated gases, it significantly enhances combustion stability and enables low-load operation without compromising fluidization quality. These findings demonstrate the potential of partial FGR as a control strategy for flexible, waste-fueled CFB systems and supports its application in future low-carbon energy systems. Full article

The nominal compositions of Fe₆₅Co_10−xNi_10−xCr₁₅Si_2x (x = 1, 2, and 3 at.%) medium-entropy alloys (MEAs) were designed and fabricated by vacuum arc melting. Their microstructure, hardness, and mechanical properties were systematically characterized. Corrosion behavior was evaluated in 3.5 wt.% NaCl solution by potentiodynamic polarization and electrochemical impedance spectroscopy. The investigated MEAs exhibit a dual-phase microstructure composed of face-centered cubic (FCC) and body-centered-cubic (BCC) phases. With increasing Si content, yield strength and ultimate tensile strength increase, while uniform elongation decreases. Hardness also increases with increasing Si content. For the x = 3 MEA, the yield strength, ultimate tensile strength, and hardness of are ~518 MPa, ~1053 MPa, and 262 ± 4.8 HV, respectively. The observed strengthening can be primarily attributed to solid solution strengthening effect by Si. Polarization curves indicate that the x = 3 MEA exhibits the best corrosion resistance with the lowest corrosion current density ((0.401 ± 0.19) × 10⁻⁶ A × cm⁻²) and corrosion rate ((4.65 ± 0.19) × 10^–2 μm × year⁻¹)). Equivalent electric circuit analysis suggests the formation of a stable passive oxide film on the MEAs. This conclusion is supported by the capacitive behavior, high impedance values (> 10⁴ Ω cm²) at low frequencies, and phase angles within a narrow window of 80.05°~80.64° in the medium-frequency region. The passive-film thickness was calculated and the corrosion morphology was analyzed by SEM. These results provide a reference for developing high-strength, corrosion-resistant, medium-entropy alloys. Full article

The control of crystal form in chiral active pharmaceutical ingredients (APIs) is a critical challenge in pharmaceutical development, as differences in solid-state structure can significantly influence physical properties and manufacturing performance. Troglitazone, a molecule with two chiral centers, exists as four stereoisomers (RR, SS, RS, SR) that crystallize as two enantiomeric pairs: RR/SS and RS/SR. This study aims to elucidate the relationship between solution-state molecular interactions and crystallization behavior of these diastereomeric pairs. Antisolvent crystallization experiments were conducted for both mixed solutions containing all four isomers and solutions of individual pairs. Crystallization kinetics were monitored by HPLC, and the resulting solids were characterized by PXRD, DSC, TG, and microscopic observation. Nucleation induction times were determined over a range of supersaturation levels. To probe intermolecular interactions in solution, NOESY and targeted NOE NMR experiments were performed, and the results were compared with crystallographic data. The RS/SR crystals(H-form) consistently exhibited shorter induction times and faster crystallization rates than the RR/SS crystals (L-form), even under conditions where RR/SS solutions were more supersaturated. In mixed solutions, H-form crystallized preferentially, with L-form either remaining in solution or being incorporated into H-form crystals as a solid solution. NOESY and NOE analyses revealed intermolecular proximities between protons that are distant in the molecular structure, indicating the presence of ordered aggregates in solution. These aggregates were more structurally compatible with the H-form than with the L-form crystal lattice, as supported by crystallographic distance analysis. The results demonstrate that differences in nucleation kinetics between troglitazone diastereomers are closely linked to solution-state molecular arrangements. Understanding these relationships provides a molecular-level basis for the rational design of selective crystallization processes for chiral APIs. Full article

Although adding iron salts can improve phosphorus removal in membrane bioreactor (MBR) processes, overdosing iron salts may result in excessive iron concentrations in the effluent and pose risks of surface water contamination. In this study, an optimized iron salt dosing method was proposed to comprehensively investigate its effects on the performance of MBRs and the control of iron leakage. The results showed that batch dosing of solid iron salts (Fe₂(SO₄)₃) into the influent or activated sludge maintained an effluent Fe³⁺ concentration below 1.0 mg/L and a total phosphorus (TP) concentration below 0.30 mg/L. Long-term operation of the MBR (under conditions of HRT = 4.3 h, SRT = 20 d, and MLSS = 12 g/L) showed that batch dosing of solid iron salts led to an increase in the effluent ammonia–nitrogen (NH₃-N) concentration, and the nitrification effect was restored after supplementing the alkalinity. Iron salts increased the TP removal rate by approximately 40% while inhibiting the biological phosphorus removal capacity. The average Fe³⁺ concentration in the membrane effluent (0.23 ± 0.11 mg/L) met China’s Environmental Quality Standard for Surface Water (GB3838-2002). This study demonstrates that batch dosing of solid iron salts effectively controls iron concentration in the MBR effluent while preventing secondary pollution. The mechanisms of the impact of iron salts on MBR performance provide crucial theoretical and technical support for MBR process optimization. Full article

With the low-carbon transformation of the steel industry, using low-carbon raw materials is one of the important ways to achieve the “dual carbon” goals. Pellets have great physical and chemical properties as low-carbon furnace materials, which can significantly reduce blast furnace carbon emissions, exhibiting favorable overall environmental benefits. Increasing their proportion in the furnace is one of the important measures the steel industry can take to reduce carbon emissions. Binders play a critical role in the pelletizing process, and their properties directly influence pellet quality, thereby affecting the subsequent blast furnace smelting process. Compared with traditional bentonite, organic binders have become a potential alternative material due to their environmental friendliness, renewability, and ability to significantly reduce silica and alumina impurities in pellets while improving the iron grade. This work systematically elucidates the mechanism of organic binders, which primarily rely on the chemical adsorption of carboxyl groups and the hydrogen bonding of hydroxyl groups to enhance pellet strength, and then provides three typical examples of organic binders: lignosulfonate, carboxymethyl cellulose (CMC), and carboxymethyl starch (CMS). The common characteristic of these organic binders is that they are derived from renewable biomass through chemical modification, which is a derivative of biomass with renewable and abundant resources. However, the main problem with organic binders is that they burn and decompose at high temperatures. Current research has achieved technological breakthroughs in pellet quality by combining LD sludge, low-iron oxides, and nano-CaCO₃, including improved iron grade, reduced reduction swelling index (RSI), and enhanced preheating/roasting strength. Future studies should focus on optimizing the molecular structure of organic binders by increasing the degree of substitution of functional groups and the overall degree of polymerization. This approach aims to replace traditional bentonite while exploring applications of composite industrial solid wastes, effectively addressing the high-temperature strength loss issues in organic binders and providing strong support for the steel industry to achieve the green and low-carbon goals. Full article

The zucchini market is growing worldwide due to its health and nutritional properties and culinary versatility. However, fruits harvested in the early stages of development are very perishable, which requires efforts to extend their shelf life. The aim of this study was to determine the effect of an innovative method involving a dynamically controlled atmosphere (DCA) and controlled atmosphere (CA) on the quality of zucchini stored at two temperatures (5 and 8 °C). After 20 d of cold storage, the fruit was further monitored under retail conditions (air, 15 °C). CA and DCA applied in a cold store at 8 °C improved the storage ability of the zucchini and allowed it to remain marketable for another 8 days at 15 °C. However, there were no significant effects of the storage method at 5 °C on the shelf life of zucchini at 15 °C. In addition, after storage at 8 °C under CA and DCA conditions, zucchini contained more total soluble solids (4.0%), glucose (8.0 g kg⁻¹), fructose (11.0 g kg⁻¹), and polyphenols (436 mg kg⁻¹) than those stored under normal atmosphere (3.6%, 6.2 g kg⁻¹, 9.9 g kg⁻¹, 377.8 mg kg⁻¹ respectively). The use of CA and DCA extends the shelf life and supports sustainable production and consumption of zucchini fruit. Full article

Coffee silverskin (CS), the principal solid by-product from coffee roasting, is a promising raw material for sustainable food applications aligned with circular economy principles. Due to its high flammability at roasting temperatures, effective management of CS is not only an environmental but also a safety concern in coffee processing facilities. To the best of our knowledge, this is the first study evaluating the chemical composition, bioactivity, safety, and environmental impact of torrefacto (CT) and natural (CN) coffee silverskin. CT (from Arabica–Robusta blends subjected to sugar-glazing) and CN (from 100% Arabica) were characterized in terms of composition and function. Oven-dried CT showed higher levels of caffeine (13.2 ± 0.6 mg/g vs. 8.7 ± 0.7 mg/g for CN), chlorogenic acid (1.34 ± 0.08 mg/g vs. 0.92 ± 0.06 mg/g), protein (18.1 ± 0.2% vs. 16.7 ± 0.2%), and melanoidins (14.9 ± 0.3 mg/g vs. 9.6 ± 0.2 mg/g), but CN yielded more total phenolics (13.8 ± 0.6 mg GAE/g). Both types exhibited strong antioxidant capacity (ABTS: 48.9–59.2 µmol TE/g), and all oven-dried samples met food safety criteria (microbial loads below 10² CFU/g, moisture 7.9%). Oven drying was identified as the most industrially viable, ensuring preservation of bioactives and resulting in a 19% lower greenhouse gas emissions impact compared to freeze-drying. Sun drying was less reliable microbiologically. The valorization of oven-dried CT as a clean-label, antioxidant-rich colorant offers clear potential for food reformulation and waste reduction. Renewable energy use during drying is recommended to further enhance sustainability. This study provides scientific evidence to support the safe use of coffee silverskin as a novel food, contributing to regulatory assessment and sustainable food innovation aligned with SDGs 9, 12, and 13. Full article

Edible composite coatings represent an alternative approach to reducing postharvest losses and extending the shelf life of perishable fruits. This study developed a nano-biopolymer coating by integrating pullulan (PUL), nano-silica (Nano-SiO₂), and tea polyphenols (TP) to retard deterioration in cherry tomatoes (Solanum lycopersicum var. cerasiforme). Optimized through response surface methodology (0.06% Nano-SiO₂, 0.1% TP, 1.8% PUL, 0.77% glycerol), the resulting Nano-SiO₂/PUL/TP composite film showed improved barrier properties (water vapor permeability, WVP: 0.2063 g·mm·m⁻²·h⁻¹·kPa⁻¹) and increased mechanical strength (tensile strength, TS: 2.62 MPa; elongation at break, EB: 67.67%), which may be attributed to a homogeneous microstructure stabilized via intermolecular hydrogen bonding. The composite coating exhibited significant (p < 0.05) antioxidant activity (59.04% DPPH·scavenging) compared to the PUL film (1.17%) and showed efficacy against S. aureus. When applied to cherry tomatoes stored at 4 °C for 15 days, the coating contributed to improved postharvest quality by reducing weight loss (−27.6%) and decay incidence (−32.3%), delaying firmness loss (2.40 vs. 0.54 N in uncoated group, CK), suppressing respiration rate (−38.8%), and enhancing the retention of total acidity (+9.7%), vitamin C (+49.6%), and total soluble solids (+48.6%) compared to the CK (p < 0.05). Principal component analysis supported sensory evaluation results, indicating the coating helped maintain sensory quality (scores > 6.0) and commercial value while extending shelf life from 9 to 15 days. These results suggest that the Nano-SiO₂/TP/PUL composite coating may serve as a preservative for extending the shelf-life of cherry tomatoes by effectively reducing decay and mitigating quality degradation. Full article

Tomato leaves, typically discarded during harvest, are a rich yet underutilized source of bioactive compounds. This study aimed to valorize tomato leaves by optimizing the extraction of their phenolic compounds using a water-based method and response surface methodology. The optimal conditions, notably heating a mixture of 1:50 solid-to-liquid ratio at 71 °C for 29 min, yielded the most total phenolic content and antioxidant activity. The biological activities of the lyophilized tomato leaf extract (TLE) were then assessed. TLE showed dose-dependent antimicrobial activity against Escherichia coli and Candida albicans, but neither against Pseudomonas aeruginosa nor Staphylococcus aureus. In addition, it demonstrated moderate cytotoxicity against MCF-7 breast cancer cells with an IC₅₀ value of 114.5 µg/mL. Interestingly, the extract significantly reduced intracellular reactive oxygen species levels in RAW 264.7 macrophages, supporting its anti-inflammatory potential. LC-MS analysis identified rutin (45.21%), 4-hydroxycoumarin (13.60%), and α-tomatine (12.37%) as the major chemical constituents in TLE, suggesting contributing effects behind the observed bioactivities. These results support the potential of tomato leaf extract as an eco-friendly source for functional ingredients, transforming agricultural waste through green extraction into valuable applications for nutraceuticals and sustainable product development. Full article

Background/Objectives: Enhancement of cellular NAD⁺ mediated by NMN has emerged as a pivotal strategy in modulating the aging process. This study aimed to systematically investigate the anti-aging effects of NMN on human skin fibroblasts, focusing on how the former contributes to the improvement of cellular health and function. This study elucidated the molecular and functional mechanisms by which NMN contributes to the attenuation of skin aging. Methods: We performed extensive in vitro and transcriptomic analyses. Human skin fibroblasts were treated with NMN, and the induced biological responses were observed under oxidative stress/photo-aging models. Results: Transcriptome analysis revealed distinct gene expression patterns for NAD⁺ and its precursors (NMN, NR, and NAM), showing significant differences between NMN and other precursors (NR and NMN). NMN seemed to be significantly involved in cytokine and chemokine activity. It significantly elevated cellular NAD⁺ levels, activated sirtuin and autophagy pathways, and enhanced mitochondrial function, collectively maintaining cellular homeostasis under stress. Furthermore, it suppressed cellular senescence, promoted cell proliferation, supported extracellular matrix integrity, and accelerated wound healing. Conclusions: The study provided essential mechanistic evidence supporting the anti-aging effects of NMN in skin cells and addressed the current lack of scientific validation of NMN-based topical applications. The findings established a solid academic background for future translational research and the development of NMN-based therapeutics and cosmeceuticals. Full article

As one of the most important emerging contaminants, the increasing application and discharge of antibiotics have resulted in widespread public concerns due to their significant threat to various organisms, especially to human health. In this study, we collected the relevant published peer-reviewed articles investigating the occurrence, distribution, and environmental fates of antibiotics in a typical island province in China, followed by a statistical analysis, mainly including the categories and species, the concentration levels, and the ecological risk assessment of different antibiotics in various environmental media. As for the number of types of antibiotics, we found that, in the aqueous environment, there are more types of antibiotics detected in surface water and seawater, and those in the effluent of wastewater were fewer. In addition, antibiotics occurring in surface water sediment and solid waste were also noticed, even though the number of types was relatively lower than that in water matrices. As for the concentration levels, the fluoroquinolones, sulfonamides, macrolides, and tetracyclines were usually those with higher average concentrations and wider concentration ranges than the other classes, regardless of whether they were in aqueous or solid media. The concentrations of antibiotics in effluent and solid waste were significantly higher than those in other cases. Furthermore, the risk quotient method was also performed to assess the ecological risk of different antibiotics, mainly in surface water and seawater, and the similar categories presented significantly different risks in algae, invertebrates, or fish. This study provides a systematic management of antibiotic pollution and raises concern and support for the efficient treatment and disposal of antibiotics in future works and in life. Full article

Therapy resistance is a major obstacle to cancer treatment, and transforming growth factor-beta (TGF-β) signaling has emerged as a major instigator across many cancer types and therapeutic regimens. Solid tumors overexpress TGF-β ligands, and canonical and non-canonical TGF-β signaling pathways drive molecular changes in most cell types within the tumor to hijack therapeutic responses. Cancer therapies further stimulate TGF-β release to potentiate this problem. Molecular mechanisms of TGF-β action supporting resistance include upregulation of drug efflux pumps, enhanced DNA Damage Repair, elaboration of stiffened extracellular matrix, and decreased neoantigen presentation. TGF-β also activates pro-survival pathways, such as epidermal growth factor receptor, B-cell lymphoma-2 expression, and AKT-mTOR signaling. TGF-β-induced epithelial-to-mesenchymal transformation leads to tumor heterogeneity and acquisition of stem-like states. In the tumor microenvironment, TGF-β induces extracellular matrix production, contractility, and secretion of immunosuppressive cytokines by cancer-associated fibroblasts that contribute to drug resistance. TGF-β also blunts cytotoxic T and NK cell activities and stimulates recruitment and differentiation of immunosuppressive cells, including T-regulatory cells, M2 macrophages, and myeloid-derived suppressor cells. The importance of TGF-β signaling in development of drug resistance cannot be understated and should be further explored mechanistically to identify novel molecular approaches and combinatorial drug dosing strategies to prevent drug-resistance. Full article