Search Results (178)

Excessive application of chemical preservatives has raised increasing concerns regarding food safety and human health, prompting the search for safer natural alternatives. Lavender essential oil (LEO), a plant-derived antimicrobial agent, has been considered a promising substitute for synthetic preservatives, but its high volatility and poor water solubility limit its practical application. In this study, LEO nanoemulsions were fabricated via high-pressure homogenization using sodium caseinate (SC) and tea polyphenols (TPs) as composite emulsifiers. The preparation process was optimized using a three-factor, three-level orthogonal design, and the physicochemical properties, storage stability, and antibacterial activity were systematically investigated. The optimal preparation conditions were determined as an SC/TP mass ratio of 2:1, homogenization pressure of 70 MPa, and 7 homogenization cycles. The optimized nanoemulsion exhibited a droplet size of 130–210 nm, zeta potential of −30.89 mV, and encapsulation efficiency of 98.61%, with typical shear-thinning behavior and excellent storage stability. The percentage of free LEO remained below 7.5% within 15 days, indicating high stability, and the release behavior followed a zero-order kinetic model. The prepared nanoemulsion showed significant antibacterial activity against Staphylococcus aureus and Escherichia coli, with a minimum inhibitory concentration (MIC) of 62.5 μg/mL for both strains. This study confirms that the SC/TP composite interface can effectively stabilize LEO nanoemulsions, providing a theoretical basis for the development of natural and efficient food preservatives. Full article

Sodium caseinate (SC)-stabilized emulsions are highly susceptible to flocculation and phase separation near the protein isoelectric point (pI), limiting their application in acidified food systems. In this study, high acyl gellan gum (HA) was introduced to construct pH-responsive protein–polysaccharide complexes to modulate the interfacial assembly and stability of SC emulsions. Results demonstrated that HA interacts with SC primarily through electrostatic attraction and multi-site hydrogen bonding. This interaction induces protein conformational rearrangement and, as evidenced by combined structural and computational analyses, facilitates the assembly of a denser, interconnected composite network. The formation of HA–SC complexes significantly enhanced interfacial adsorption, reduced oil–water interfacial tension. Rheological and microrheological analyses revealed the composite system formed an elasticity-dominated weak gel network, restricting droplet mobility and suppressing aggregation. Consequently, HA–SC emulsions exhibited markedly improved pH tolerance and physical stability compared to SC-only emulsions, particularly near the pI, evidenced by reduced droplet size, lower Turbiscan stability indices, and more homogeneous microstructures. Crucially, utilizing a well-defined mechanistic model of fixed HA and SC concentrations, this study quantitatively links molecular interactions, interfacial network reconstruction, and macroscopic emulsion stability across a broad pH continuum. Rank-correlation analysis of pH-resolved descriptors shows the molecular charge state co-varies monotonically with the interfacial network and macroscopic stability, and is inversely coupled to droplet mobility. These findings provide new insights into protein–polysaccharide interfacial engineering, establishing the essential physical-stability foundation for the future rational design of acid-tolerant food emulsions and functional delivery systems. Full article

This study presents a novel approach to the use of kraft lignin in electrochemical energy sources, with a focus on its use as anode material. The key novelty of this study is the use of natural casein as an innovative binder in electrode production, offering a sustainable and efficient alternative to conventional binders. The carbonaceous material was obtained from kraft lignin by two heat treatments at a relatively low temperature of 300 °C—one in a nitrogen atmosphere and the other in air. The results indicate that carbonization at this lower temperature provides promising electrochemical properties while improving cost-effectiveness and energy efficiency compared to higher temperature processes. Additionally, wettability analysis based on contact-angle measurements revealed substantially improved electrolyte affinity for casein-based electrodes, which correlates with their enhanced electrochemical performance. The study showed promising performance of the developed electrodes as follows: a capacity of 67 F g⁻¹ for supercapacitor applications, 250 mAh g⁻¹ for lithium-ion batteries, and 50 mAh g⁻¹ for sodium-ion batteries. These results confirm that kraft lignin, in combination with casein as a binder, is an environmentally friendly and economically viable alternative to traditional electrode materials. Full article

In this study glycerol-plasticized sodium caseinate/polyvinyl alcohol NaC/PVA composite films were prepared by solution casting, and the effects of incorporating caffeic acid powder at different concentrations 0% 2.5% 5% and 15% w/w on structural mechanical barrier and postharvest performance were investigated. Caffeic acid (CA) (3,4-dihydroxycinnamic acid) is a naturally occurring phenolic compound commonly found in plant tissues and food sources such as apples, blueberries, and coffee. FTIR analysis revealed that shifts and broadening in OH bands indicated hydrogen bonding interactions between caffeic acid and the polymer matrix influencing structural organization. The pure NaC/PVA film exhibited high WVTR due to glycerol while maintaining low OTR. Adding 2.5% caffeic acid reduced WVTR but increased OTR through structural disruption. At 5% a continuous hydrogen-bonded network formed, restricting chain mobility and reducing free volume, thus lowering WVTR and OTR while preserving mechanical integrity. SEM micrographs revealed that high CA concentrations, particularly at 15%, led to aggregation-induced partial phase separation and consequent performance loss. Packaging treatments mainly affected physical and color attributes rather than primary metabolites. The NaC/PVA/5CA reduced weight loss and delayed sugar accumulation compared with NaC/PVA. Sugars peaked earlier in NaC/PVA but increased continuously in NaC/PVA/5CA, reaching maximum at the final storage stage. These findings indicate concentration-dependent mechanisms and highlight the potential of caffeic acid-based active packaging to regulate metabolism and extend postharvest quality. Overall results support its application in sustainable packaging systems for improved shelf life management. Full article

Citral exhibits favorable broad-spectrum antibacterial activity; however, it is prone to oxidative degradation or structural changes. To improve its stability and practical applicability, citral-loaded microcapsules were prepared using sodium carboxymethyl starch (CMS) and sodium caseinate (CS) via emulsification and freeze-drying. We then investigated the effects of the CMS-to-CS mass ratio on the physicochemical properties and microstructure of the microcapsules, and systematically evaluated the antibacterial activity and underlying mechanisms of the citral-loaded microcapsules against typical foodborne pathogenic bacteria and food-related bacteria. The results showed that when the CMS-to-CS mass ratio was 3:1, the microcapsules prepared exhibited the highest encapsulation efficiency (83.87%). The molecular interactions between citral and the wall materials were confirmed. The citral-loaded microcapsules demonstrated good thermal stability and a compact morphology with dense blocks. Furthermore, treatment with the citral-loaded microcapsules led to the leakage of intracellular contents and compromised the cell membrane integrity of Staphylococcus aureus, thereby inhibiting its normal physiological functions, as well as effectively disrupting bacterial aggregation at high concentrations. These findings offer a valuable reference for future studies aimed at improving the stability of citral when used as an antibacterial agent and at enhancing its practical application value. Full article

The purpose of the study was to characterize the basic structure of nanoparticles (Zein-CS-Cur-Que) embedded in curcumin and quercetin, realize the synergistic antioxidant of dietary polyphenols, and improve the transmembrane transport rate and bioavailability of curcumin. The oral delivery system Zein-CS-Cur-Que developed based on the synergistic encapsulation of curcumin and quercetin using the anti-solvent method with corn alkyd-soluble proteins and sodium caseinate possessed varying nanoparticle sizes (173.96–191.03 nm) and good dispersibility (PDI < 0.17), and relied on electrostatic interactions, hydrogen bonding, and hydrophobic interactions to successfully encapsulate curcumin (94.62%) and quercetin (73.75%). The results showed that Zein-CS-Cur-Que enhanced the stability and antioxidant activity of curcumin, and increased the bioaccessibility (nearly 2-fold) and rate of translocation (nearly 2-fold) of curcumin in the gastrointestinal tract significantly. Therefore, the nanocomposite system developed in this study is crucial for the development of functional foods and dietary supplements, providing effective insights into the synergy of polyphenol interactions. Full article

Incorporating hydrophobic flavonoids such as naringenin into food systems is challenging due to their poor water solubility and instability. Effective delivery systems are essential to improve solubility, dispersibility, and controlled release during digestion. This study developed a food-grade encapsulation system using basil seed gum water-soluble extract (BSG-WSE) combined with proteins, sodium caseinate (NaCas) and whey protein isolate (WPI), via pH-driven and mild heat treatments in aqueous media, without the use of organic solvents, to ensure safety and sustainability. BSG-WSE and NaCas were tested at mass ratios of 1:1, 1:3, and 1:5 under pH conditions of 4, 5, and 7, followed by heat treatments at 60 °C or 80 °C for 30 min. The total biopolymer concentrations were 0.15%, 0.3%, and 0.45% (w/v). The most stable colloidal system was obtained at a 1:1 ratio, pH 4, and 60 °C, which was further evaluated for two additional flavonoids (rutin and quercetin) and with WPI as an alternative protein source. The highest loading capacity (11.18 ± 0.17%) and encapsulation efficiency (72.50 ± 0.85%) were achieved for naringenin under these conditions. Quercetin exhibited superior performance, with a loading capacity of 14.1 ± 3.12% and an encapsulation efficiency of 94.36 ± 5.81%, indicating a stronger affinity for the delivery system. WPI showed lower encapsulation efficiency than NaCas. Ternary systems (BSG-WSE, NaCas, and naringenin) formed under different pH and heat treatments displayed distinct morphologies and interactions. The pH 4 system demonstrated good dispersion and pH-responsive release of naringenin, highlighting its potential as a delivery vehicle for hydrophobic flavonoids. BSG-WSE significantly improved the stability of protein-based complexes formed via pH-driven assembly. Physicochemical characterization, rheological analysis, and release studies suggest that this system is particularly suitable for semi-solid food products such as yogurt or emulsions, supporting its application in functional food development. Full article

Cherry tomatoes are highly appreciated for their nutritional value but remain highly perishable due to rapid respiration and senescence. This study evaluated a multi-hurdle strategy combining plasma-activated water (PAW), sodium caseinate-based edible coating, and antioxidant active packaging to preserve minimally processed (MP) cherry tomatoes stored at 1 °C, 4 °C, and 8 °C for 15 days. Quality evolution was monitored through physical, chemical, nutritional, and microbiological parameters and described using pseudo-zero- and first-order kinetic models, with temperature dependence expressed by the Arrhenius equation. The combined treatment (prototype) slowed the degradation rates of pH, titratable acidity, total polyphenols, and antioxidant capacity, as reflected by consistently lower kinetic rate constants across all temperatures. Prototype samples showed better retention of polyphenols and antioxidant capacity, particularly at 1 °C and 4 °C, without detrimental effects on visual appearance. Metagenomic analysis revealed that the multi-hurdle treatment reshaped the microbial community, reducing the relative abundance of potentially problematic taxa such as Acinetobacter johnsonii and limiting the occurrence of antimicrobial resistance (AMR) genes at the end of storage. This study provides the first integrated assessment of PAW, edible coating, and antioxidant active packaging as a synergistic multi-hurdle strategy, demonstrating their combined ability to extend shelf life while modulating the microbiome and resistome of minimally processed cherry tomatoes. Full article

Most previous research focuses on single-state palm oil (PO) modification of starch films, while the interaction between different physical states PO and starch matrix has not been deeply discussed. This study aimed to investigate the effects of PO nanoparticles in three physical states (liquid, semi-solid, solid) on starch-based films, where the physical state of PO nanoparticles was regulated by manipulating the melting point of PO. PO nanoparticles with five different melting points (8, 24, 33, 42, and 53 °C) were prepared at 30 °C using emulsification with sodium caseinate as the emulsifier and were integrated within a starch matrix to fabricate films. The findings revealed that the starch film with 33 °C PO nanoparticles had the smoothest and most homogeneous surface, the best dispersion state of the oils, the optimal compatibility, and the highest film crystallinity. These films exhibited enhanced tensile strength (TS), stiffness, and barrier properties. Furthermore, starch films containing solid nanoparticles exhibited superior thermal stability. This study innovatively prepared nano-scale palm oil-starch composite films and revealed the pivotal role of the viscoelastic attributes of semi-solid PO nanoparticles in enhancing the qualities of starch-based films. Full article

Chemoresistance is the leading cause of mortality in cancer patients. The poor clinical prognosis and limited therapeutic options for acute myeloid leukemia (AML) patients demand the development of new therapeutic strategies capable of overcoming chemoresistance and avoiding toxic side effects in normal cells. Sodium caseinate (SC), a derivative of casein protein found in milk, has demonstrated a dual role: it inhibits the proliferation of several murine AML cell lines while promoting the proliferation of normal hematopoietic cells. Furthermore, we previously showed that SC can modulate the expression of genes associated with chemoresistance in mouse cells. However, its biological effects on cytarabine-resistant human leukemia cells remain unclear. Here, we developed the HL60-CR50 subline, resistant to cytarabine, and investigated the effects of SC. We demonstrated that SC significantly reduced cell proliferation, decreased SIRT1 levels, increased acetylated p53, activated cleaved caspase-3, and enhanced apoptosis in cytarabine-resistant cells. These findings suggest that SC might have potential as a therapeutic adjuvant for AML, providing efficacy in chemoresistant cases compared with cytarabine treatment alone. Full article

This study investigates the formulation and optimization of acid-stable water-in-oil-in-water (W/O/W) double emulsions stabilized by sodium caseinate (NaCN)–xanthan gum (XG) complexes, with the aim of developing a natural biopolymer-based delivery system exhibiting controlled release behavior. The emulsions were prepared at pH 4, and the effects of NaCN concentration, XG concentration, and primary fraction (PF) on the encapsulation efficiency (EE) and droplet size (DS) were systematically evaluated using response surface methodology (RSM) based on a Box–Behnken design (BBD). Microscopic and rheological analyses confirmed the formation of a rigid interfacial film around the droplets, leading to improved emulsion stability over one month of storage at 4, 25, and 40 °C. The release kinetics of chlortetracycline (CTC), used as a model drug, followed a Fickian diffusion mechanism, indicating efficient control of the release rate by the NaCN/XG interfacial complex. The optimized formulation (NaCN = 0.652%, XG = 0.339%, PF = 10%) yielded an encapsulation efficiency of 87.7% and a mean droplet size of 24.83 µm, demonstrating excellent predictive accuracy of the statistical model. The results highlight the potential of NaCN/XG complexes to produce acid-stable, biopolymer-based double emulsions capable of sustained release of bioactive compounds, making this system promising for food and pharmaceutical delivery applications. Full article

Polysaccharide intervention is an effective strategy to regulate properties of emulsions. In this study, xanthan gum (XG), konjac glucomannan (KGM), guar gum (GG), and inulin (IN) were selected to regulate physical and gastrointestinal digestive properties of sodium caseinate (CAS) oil-in-water (O/W) emulsions. The results indicate that IN could not improve CAS emulsion properties, while XG, KGM, and GG significantly reduced droplet size and improved emulsions’ stability. With the increase of the polysaccharide concentration, the G′ and G″ of the emulsions increased and the emulsions showed an obvious “solid-like” state, which effectively slowed down the “strain-thinning” phenomenon. The microstructure demonstrated that the polysaccharide chains are effectively connected with the surface membrane of droplets, which effectively improves interfacial membrane strength and inhibits droplet aggregation. In vitro digestion simulations proved that polysaccharides effectively modulate emulsion lipid release, providing an excellent lipid environment for curcumin absorption in the gastrointestinal tract. The order of the four polysaccharides in improving CAS emulsions was XG > KGM > GG > IN. This study dissects the differential regulation of physical and gastrointestinal digestive properties of emulsion by polysaccharides, providing theoretical support for functional emulsions for diverse requirements. Full article

The paper explored the impact of sodium caseinate (CAS) emulsion on the freeze–thaw stability of konjac glucomannan (KGM)/κ-carrageenan (KC) composite gels. It found that the emulsion and KGM both increased the viscoelasticity of the composite gel, giving it a greater elastic stress. Emulsion addition enhanced the water-holding capacity (WHC) of the KC gel from 72.36% to 89.34%. KGM addition further improved WHC to 97.54%. The hardness of the emulsion KGM/KC gel reached 9.35 N, while the values were essentially not affected by freeze–thaw. This study shows that CAS emulsion, especially under the regulation of KGM and KC, can improve the freeze–thaw stability of the gel system. The results show that emulsion has great potential in regulating the physical and textural properties of multiphase gels. The emulsion coupling method could effectively enhance the freeze–thaw stability of gels, which may provide a new strategy for the development of frozen multiphase gel foods. Full article

This study aims to enhance the oxidative stability of fish oil through encapsulation in pullulan/sodium caseinate (PUL/NaCAS) nanofibers. Electrospinning was employed to produce three formulations: control (0% fish oil) and samples with 5% and 10% fish oil. Characterization of the emulsions showed that increasing oil content led to larger droplet size and reduced viscosity. Scanning electron microscopy (SEM) analysis revealed surface imperfections and a gradual increase in fiber diameter with higher oil loading. Fourier transform infrared (FTIR) spectroscopy confirmed molecular interactions, and fibers with 10% fish oil showed a shift toward a more amorphous structure. Fish oil incorporation also enhanced hydrophobicity and thermal stability, as indicated by thermal and wettability measurements. Antioxidant assays include 2,2-diphenyl-1-picrylhydrazyl (DPPH), 2,2′-azino-bis (3-ethylbenzothiazoline-6-sulfonic acid) (ABTS), and total phenolic content (TPC), which showed the highest bioactivity at 5% fish oil, with a slight decrease at 10%, likely due to structural saturation. Encapsulation at 5% fish oil significantly reduced lipid oxidation during storage (hydroperoxide values decreased from 8.6 to 4.8 mM at 60 °C/15 days), demonstrating the protective effect of the nanofiber matrix. Docking and density functional theory (DFT) analyses confirmed stable DHA/EPA–caseinate interactions and increased electronic stability, supporting the experimental results. Compared with conventional carriers such as spray-dried or maltodextrin-based systems, PUL/NaCAS nanofibers offered superior oxidative stability, bioactivity, and a biodegradable matrix. Overall, the 80PUL:20NaCAS:5% fish oil formulation represents a versatile platform for stabilizing omega-3 oils, with potential applications in food preservation, nutraceutical delivery, and functional packaging. Full article

To enhance the high-value utilization of camellia oil and innovation in functional foods, this study developed a stable emulsion template using xanthan gum (XG) and sodium caseinate (CAS) for the preparation of camellia oil microcapsules via spray drying. Employing scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), and thermogravimetric analysis (TGA), alongside additional analytical methods, this study systematically examined the influence of drying temperature (145 °C, 165 °C, and 185 °C) and XG concentration (0.2%, 0.3%, and 0.4%) on the physicochemical properties and functional attributes of the microcapsules. Results indicated that 0.3% XG was the optimal concentration, enabling uniform emulsion droplet dispersion while balancing microcapsule bulk density and solubility, thereby optimizing processing and dissolution properties. 165 °C was identified as the optimal drying temperature, yielding the highest microcapsule yield (53.68%), moisture content (<2.84%) meeting storage standards, and optimal β-carotene encapsulation efficiency (89.6%) and DPPH radical scavenging rate (74.80 ± 0.34%). FTIR analysis confirmed successful encapsulation of camellia oil within microcapsules. TGA and in vitro digestion experiments demonstrated excellent thermal stability and digestive characteristics of the microcapsules. In summary, this study identified the most favorable preparation conditions for camellia oil microcapsules, providing theoretical support and technical reference for expanding camellia oil applications in the food industry. Full article