Search Results (161)

The accelerated global transition toward eco-friendly mobility has necessitated robust decarbonization measures across the maritime sector, with battery-powered electric propulsion ships emerging as a promising alternative. Accordingly, the applicability of silicon carbide (SiC)-based technology to propulsion inverters, a key component of such vessels, is currently under investigation. Although life cycle assessment (LCA) studies comparing conventional silicon (Si)-based and SiC-based inverters have been conducted previously, these analyses neglect realistic operating profiles and load fluctuations, limiting their applicability. Furthermore, life cycle cost assessment (LCCA) integrating real-world operating conditions has rarely been addressed. To address these gaps, this study conducted a comparative LCA and LCCA of Si IGBT and SiC MOSFET inverters for marine electric propulsion systems across three vessel types: a cruise ship, a passenger and car ship, and a recreational boat, incorporating real-world load profiles to evaluate global warming potential (GWP), fossil depletion (FD), and cumulative energy demand (CED). The static LCA results showed negligible differences between inverter types, contributing less than 1% to total impacts. The dynamic LCA demonstrated that SiC MOSFET inverters reduced environmental impacts by approximately 57%, 52%, and 34% for cruise ships, passenger and car ships, and recreational boats, respectively. Despite a 40% higher initial investment cost, SiC inverters achieved payback periods well within vessel lifetimes across all vessel types. These findings support SiC inverters as a sustainable and economically viable solution for ship electrification. Full article

This paper presents a complete analysis and simulation of the operation of a zero-emission marine vessel with electric propulsion. A hypothetical passenger ferry operating in the Aegean Sea, Greece, is considered, which is powered by a hydrogen fuel cell, a battery energy storage system (BESS) and photovoltaic (PV) energy. Wind-assisted ship propulsion (WASP) is employed to reduce the energy consumption of the ship. A complete analysis is performed, which includes optimal energy management, dynamic analysis and emerging stability concerns due to the high integration of power electronic converters in the shipboard microgrid. The energy management system (EMS) applies multi-objective optimization based on the corona virus optimization (CVO) algorithm and the teaching–learning-based optimization algorithm (TLBO). The dynamic behavior of the microgrid is tested using real-time digital simulations. Converter-driven stability issues are investigated, which may arise due to interactions among the various converter controllers and passive components of the microgrid. Full article

This study presents an optimal strategy for hybrid electric propulsion ships with variable-speed diesel generators (VSDGs) and proton exchange membrane fuel cells (PEMFCs). With the International Maritime Organization imposing stricter environmental regulations, shipboard power systems must satisfy emission limits and operational constraints cost-effectively. To address this challenge, a Lagrangian relaxation (LR)-based optimization framework integrating unit commitment and economic dispatch is developed. Practical operational constraints reflecting realistic shipboard conditions are incorporated. The effectiveness of the proposed framework was evaluated through simulation-based case studies under various realistic operating conditions. Simulation results show that the proposed LR framework achieves lower total fuel costs than conventional priority-list methods while complying with environmental regulations under diverse operating scenarios. Full article

Maritime transport is under increasing pressure to cut greenhouse gas and pollutant emissions to meet global decarbonization goals and tighter environmental standards. Ship electric propulsion systems offer a promising solution for short-range maritime operations, particularly for small vessels and coastal activities. Full-electric vessels can significantly reduce operational emissions; however, a key challenge is the extensive charging time for onboard energy storage, which can affect operational continuity and logistical efficiency. This study examines mission planning and energy management for a hybrid multi-source electric mail boat operating in the Aeolian archipelago. It evaluates the viability and performance of a daily inter-island route powered by a high-temperature methanol fuel cell, batteries, and photovoltaic panels. A routing and simulation framework was developed to model the boat’s itinerary among seven islands, accounting for realistic navigation speeds, scheduled stops, solar energy availability, and battery state-of-charge constraints. The study analyzes distance, travel time, energy consumption, solar power generation, and fuel–electric usage with high temporal resolution, enabling detailed analysis of power flows during sailing and docking. Several operational strategies were assessed, including periods of increased speed supported by battery assistance and fuel–electric cell output, combined with coordinated energy management to keep battery levels above a lower acceptable threshold while completing the route in a single day. The methodology provides a practical tool for planning low-emission island networks and supports the integration of innovative energy systems into small electric workboats operating in specific maritime regions. Full article

Autonomous navigation technologies have been widely adopted in the automotive and aviation sectors, significantly reducing human-error-induced accidents and operational costs. However, their application to maritime systems remains limited due to the complexity of conventional propulsion systems. Electric propulsion ships, with well-defined system boundaries and accessible operational data, offer a promising platform for autonomous navigation. In this study, we propose an FMEA-guided selective multi-fidelity digital twin framework for fault detection, where model fidelity is adaptively selected between low- and high-fidelity models based on risk priority numbers derived from failure mode and effects analysis. This approach enables selective execution of computationally expensive models only under high-risk conditions, thereby improving computational efficiency. In addition, a sliding window-based algebraic aggregation method is employed to achieve lightweight and real-time fault diagnosis. The proposed framework is validated using operational sensor data from a 100 kW electric propulsion ship under multiple fault scenarios, including power supply faults and signal anomalies. Experimental results show that the proposed method reduces computational cost while maintaining stable real-time performance, compared to conventional data-driven AI-based approaches. These results demonstrate that the proposed framework provides an effective and efficient solution for enhancing the reliability and safety of autonomous ship systems. Full article

With increasingly stringent greenhouse gas emission regulations in the shipping industry, there is an urgent need for an efficient energy management strategy for new energy ship power systems. However, existing dispatch models often overlook the dynamic energy-saving potential of active drag reduction technologies and lack effective optimization algorithms capable of handling high-dimensional, multi-constrained problems. To address these problems, this paper proposes a novel integrated dispatch framework for hybrid energy ship power systems that incorporates air lubrication systems. First, a unified multi-energy dispatch model is established, coupling the dynamic operation of air lubrication systems with electrical, thermal, and propulsion energy flows. Second, an Improved Traffic Jam Optimizer algorithm is proposed, which enhances global exploration and local exploitation through a nonlinear parameter adaptation mechanism, differential mutation strategy, and dynamic hybrid search architecture. Convergence analysis based on Markov chain theory is provided to guarantee algorithmic reliability. Simulation results demonstrate that the proposed algorithm outperforms existing methods in terms of convergence speed, solution accuracy, and stability. Furthermore, integrating air lubrication systems into the ship power system reduces total operating costs and greenhouse gas emissions by up to 20.569% and 6.310%, respectively. Full article

Ship propulsion electrification is an important enabler towards a sustainable shipping industry. Ship power systems are turning into modern microgrids integrating different generation/storage resources, converter technologies and electric propulsion, utilizing different control levels and communication systems. The definition of comprehensive test requirements, set-ups and procedures is critical to ensure that the equipment will behave as expected in the ship system context. Comprehensive testing is becoming increasingly challenging due to complex interactions at the system level, attributed to electrical, mechanical/hydrodynamic, control, protection, and information and communication systems present in modern and future ships. Standardization has addressed the testing of several individual components, as well as specific system tests for marine applications; however, a holistic testing approach is missing. This paper reviews the generic and maritime standards for testing ship electric power propulsion systems and equipment, focusing on generators/motors, power electronic drives and onshore power supply systems. A review of the scientific literature is performed, classifying the publications according to the testing method, such as pure hardware tests, co-simulation and hardware in the loop simulation (HIL). The need for holistic testing of shipboard microgrids is explained. A holistic HIL testing approach is proposed, which integrates hardware controllers and power equipment of different manufacturers and functions, in order to reduce the complexity and cost of sea trials. The proposed approach is accompanied by example implementation and application guidelines. Full article

In this paper, the dynamic modeling and integrated simulation of a ship microgrid system designed to enhance power quality and energy efficiency in electric propulsion vessels are proposed. The proposed system consists of a photovoltaic (PV) array, a battery energy storage system (BESS), a diesel generator, and a propulsion system, all of which are organically integrated through power conversion devices. To compensate for the intermittent nature of solar power, a control strategy featuring Maximum Power Point Tracking (MPPT) for the PV system and bidirectional DC/DC converter control for the battery was implemented. Specifically, a control logic to stabilize the system output in response to the fluctuating loads of the electric propulsion system was developed using PSCAD (v50) software. The simulation results demonstrate that the proposed control strategy maintains DC-link voltage deviation within ±1.8% and achieves a settling time of less than 0.8 s while optimizing propulsion efficiency (peak-shaving ratio 25–30%) under both constant and variable speed operating conditions. Battery SOC variation is limited to 18–88%, preventing overcharge or discharge. This research provides a foundational framework for the design of energy management systems (EMSs) and grid stability assessments for future eco-friendly electric propulsion ships. Full article

Decarbonizing ocean-going shipping requires decision-grade environmental evidence for propulsion transitions, yet conventional LCA relies on static inventories that inadequately represent dynamic operations and route-dependent renewable generation. This study evaluates well-to-wake (WtW) Global Warming Potential (GWP) for two large container ships operated by a Korean company under four scenarios: conventional diesel main engine, diesel–electric with onboard generator, full battery-electric supplied by shore electricity from the Republic of Korea grid, and battery-electric with a route-resolved solar PV system. A Live-LCA (LLCA) framework couples LCI data with MATLAB/Simulink power and propulsion modeling driven by actual operating profiles and route environmental conditions to generate operational inventories for impact calculation. Diesel–electric operation increases annual WtW GWP by over 26% for both ships versus the baseline of a conventional diesel main engine, whereas shore-electric battery operation is able to reduce WtW GWP by around 40% versus diesel–electric. With limited PV installation, additional reductions are marginal. Depending on electricity profile, it can increase battery-electric GHG emissions by approximately 27%, highlighting sensitivity to electricity evolution. Overall, electric propulsion delivers climate benefits only when paired with low-carbon electricity, and LLCA enables operationally and route-grounded LCA for large container ships. Full article

This paper deals with the control of two five-phase permanent magnet synchronous motors (PMSMs), which are connected in series and operating at different speeds and torques. The topology under study is intended for use in an electrical naval propulsion system. The backstepping control strategy, which uses the Lyapunov stability concept, is employed to control the speed of the two machines considering the series connection of the PMSM stator windings. A comparative study, with respect to classical Vector Control (VC) using PI regulators, is provided to demonstrate the robustness of the proposed control strategies in both healthy and faulty conditions. Typically, dual PMSMs in series cannot operate in the degraded mode in the event of faults. This study optimizes their operation by adapting to such modes, including faults caused by symmetrical parameter changes or by an asymmetrical High Resistance Connection (HRC) in the stator windings, thereby ensuring continuity of service. The HRC is investigated and verified in one stator phase, in two adjacent stator phases and in two non-adjacent stator phases, as well as in a symmetrical HRC fault across all phases. Matlab-based simulation results validate the control design to achieve the desired performance and prove the effectiveness and the asymptotic stability of backstepping control for two series-connected 5-Փ PMSMs, thereby providing redundancy for the naval electric propulsion system. Full article

This study presents an analytical methodology for evaluating the influence of hull design parameters on the controllability and manoeuvrability of ships equipped with integrated electric propulsion systems. Unlike traditional approaches that examine the hull and propulsion plant independently, the proposed method employs a generalized model of transient modes within the propulsion complex, enabling the coupled interaction among the hull, propulsion units, electric motors, and the electrical power system to be captured during manoeuvring. Active experimental design and regression modelling are applied to construct controllability diagrams, identify the most influential dimensionless parameters, and reduce computational effort. The methodology is used to assess the effect of hull elongation (0.08–0.16 L) with curvature variation limited to 6%. The results show that this degree of elongation has minimal impact on turning performance and course-keeping stability, confirming the feasibility of such design modifications. The proposed approach provides an effective tool for early-stage design and modernization of electric ships and supports decision-making in ship behaviour prediction and traffic management. Full article

The maritime transportation industry is under pressure to reduce the level of emissions generated annually by commercial vessels. In order to achieve this objective, regulatory bodies, both national and international, have imposed strict limitations on the industry, and thus major changes have to be made in a tight time frame. In the last decade, engineers and ship designers have been searching for alternatives to traditional fuels, but it is not easy to find a perfect balance between operational costs and economic efficiency. Many potential solutions are being studied, with some of them already proven and implemented, such as liquefied natural gas, solar and wind power, electric propulsion, and many more. One solution might be biofuels, and this study aims to assess the potential impact of their use on the energy performance and durability of a typical marine propulsion engine, namely the MAN B&W 6S70MC-C7, fitted on board many types of ships including large oil tankers, container ships and bulk carriers. The main topic is approached through a progressive structure, starting from the analysis of general characteristics of these fuels and the engine installation, comparative simulations, operational experience, and technical recommendations. The comparative assessment is focused on two traditional types of fuels and two biofuel types. The aim is to identify a viable solution that can sustain the operational efficiency of this main engine without a major impact on its maintenance cycle and without additional costs on the components. Even if these biofuels are more expensive than the traditional ones, in the long run, they could prove to be a better choice in terms of operational costs and compliance with regulation. Full article

To achieve carbon neutrality in shipping and comply with the IMO’s increasingly stringent environmental regulations, the transition of small and medium-sized workboats to eco-friendly alternatives is an urgent issue. This study quantitatively compares the fuel efficiency and operational fuel cost savings of hybrid propulsion systems based on actual operational data from a buoy maintenance vessel. The methodology comprised four stages: First, measurement equipment was installed on the vessel to collect real-sea data. Second, the collected data were processed to derive specific fuel oil consumption curves and load profiles. Third, fuel consumption models for mechanical and hybrid propulsion systems were developed. The battery capacity of the hybrid models was selected based on actual operational requirements. Performance indicators and economic analyses were conducted for a comparative evaluation. Fourth, simulation results indicated that the hybrid electric system achieves 2.02% fuel savings, translating to annual fuel savings of USD 1053.24 and a corresponding 2.02% CO₂ reduction. The hybrid mechanical system yielded 0.66% savings. These improvements are attributed to a rule-based energy management strategy of operating generators at their optimal efficiency points and shutting down main engines during low-load periods. This study provides empirical evidence supporting Korea’s 2030 eco-friendly public vessel transition plan. Full article

This study presents an integrated techno-economic and environmental assessment of shaft generator (SG) integration in marine propulsion systems using alternative fuels. A comprehensive numerical model is developed to simulate the operation of a bulk carrier equipped with a low-speed two-stroke main engine, comparing conventional diesel generator (DG) configurations with SG-powered alternatives under varying ship speeds and auxiliary electrical loads. Three fuel types, heavy fuel oil (HFO), fatty acid methyl esters (FAMEs), and methanol–diesel dual fuel, are analyzed to evaluate fuel consumption, exhaust emissions, and economic feasibility. The results show that SG integration consistently reduces total fuel consumption by 0.1–0.5 t/day, depending on load and fuel type, yielding annual savings of up to 150 tonnes per vessel. Carbon dioxide (CO₂), Nitrogen oxide (NO_x), and sulphur oxide (SO_x) emissions decrease proportionally with increased SG load, with annual reductions exceeding 450 tonnes of CO₂ and up to 15 tonnes of NO_x for HFO systems. Methanol–diesel operation achieves the highest relative improvement, with up to 50% lower CO₂ and near-zero SO_x emissions, despite a moderate increase in total fuel mass due to methanol’s lower calorific value. Economically, SG utilization provides daily fuel cost savings ranging from $200 to $1050, depending on the fuel and load, leading to annual reductions of up to $320,000 for high-load operations. The investment analysis confirms the financial viability of SG installations, with net present values (NPVs) up to $1.4 million, internal rates of return (IRRs) exceeding 100%, and payback periods below one year at 600 kW load. The results highlight the dual benefit of SG technology, enhancing energy efficiency and supporting IMO decarbonization goals, particularly when coupled with low-carbon fuels such as methanol. The developed computational framework provides a practical decision-support tool for ship designers and operators to quantify SG performance, optimize energy management, and evaluate the long-term economic and environmental trade-offs of fuel transition pathways. Full article

The maritime sector, responsible for approximately 3% of global greenhouse gas (GHG) emissions, is under growing pressure to transition toward climate-neutral operations. Significant progress has been made in developing sustainable fuels and propulsion systems to meet these demands. Although electric propulsion and fuel cells are highlighted as key technologies for achieving net-zero carbon targets, they remain an immature solution for large-scale maritime use, particularly in long-distance shipping. Therefore, modifying internal combustion engines and employing alternative fuels emerge as more feasible transition strategies, especially in short-sea shipping and port applications such as tugboat operations. Among alternative fuels, hydrogen (H₂) and ammonia (NH₃) have emerged as the most prominent fuels in recent years due to their carbon-free nature and compatibility with existing marine compression ignition (CI) engines with only minor modifications. This study explores the viability of hydrogen and ammonia as alternative fuels for CI engines in terms of technological, economic, and environmental aspects. Also, using a life cycle assessment (LCA) framework, this study examines the environmental impacts and feasibility of gray, blue, and green hydrogen and ammonia production pathways. The analysis is conducted from both well-to-tank (WtT) and tank-to-wake (TtW) perspectives. The results demonstrate that green fuel production pathways significantly reduce emissions but lead to higher economic costs, while intermediate blends offer a balanced trade-off between environmental and financial performance. Moreover, the combustion stage analysis indicates that H₂ and NH₃ provide substantial environmental benefits by significantly reducing harmful emissions. Consequently, a Multi-Criteria Decision Making (MCDM) approach is employed to determine the optimal blending strategy, revealing that a 24% hydrogen and 76% marine diesel oil (MDO) energy share yields the most favorable outcome among the evaluated alternatives. Full article