Search Results (12)

Volcanic ash preserves critical information on eruption dynamics, magma evolution, and fragmentation processes, yet its small size and fragile structure pose challenges for conventional analytical methods. Advances in SEM-based automated mineralogy combined with X-ray mapping (GXMAP) provide high-resolution characterization of ash textures, particle morphology, and mineral assemblages, offering a more robust basis for interpreting pyroclastic deposits. This study applies an integrated GXMAP workflow alongside sieve-based granulometry to the Early Pleistocene trachyandesite to rhyolitic pyroclastic sequences at the Kurtan quarry (Kechut Volcanic Province, Armenia), a key regional stratigraphic marker associated with early human occupation. GXMAP-based granulometry minimizes preparation-induced fragmentation and yields more consistent and reliable grain-size and morphological data for fine ash deposits than dry sieving. The three stratigraphic units at Kurtan display distinct combinations of grain size, mineral assemblages, and particle morphologies, reflecting contrasting magma evolution, fragmentation conditions, and depositional regimes. Shape-parameter fields derived from BSE images reveal clear differences between the highly irregular, concave compound fragments dominating TP-13-1 and the smoother, more compact particles characteristic of TP-13-2 and TP-13-3. Most particles fall within the ductile domain of established shape-morphology diagrams, indicating that ductile deformation of bubble walls was a major component of fragmentation, accompanied by heterogeneous brittle breakage. These results demonstrate the effectiveness of the combined SEM-based automated mineralogy and GXMAP approach for resolving primary fragmentation, sorting characteristics, and depositional processes in fragile pyroclastic deposits. The Kurtan sequence provides new constraints on explosive volcanism in the Lesser Caucasus Mts. region. At the same time, the methodological framework offers broad applicability to tephra studies worldwide and underscores the potential of imaging-based techniques in volcanology. Full article

The Sepid-Sarve copper deposit is part of an Eocene volcano-sedimentary sequence located in the southern Sabzevar Zone. The copper mineralization occurs at the contact between pyroclastic and lava units with various limestone layers (including marly, Nummulitic, sandy, and clastic limestones). The ore minerals consist of malachite, azurite, chalcocite, digenite, cuprite, tenorite, covellite, and occasionally native copper. The associated hydrothermal fluids show moderate to high salinities, ranging from 3.08 to 13.38 wt.% NaCl equivalent, with homogenization temperatures between 90 and 356 °C, indicating fluid mixing during ore formation. Chalcocite is rarely accompanied by quartz, suggesting low silica content in the ore-forming fluids. The δ³⁴S values of sulfide samples from the Sepid-Sarve deposit range from −23.9 ± 0.3‰ to −2.9 ± 0.2‰, while δ³⁴S values of hydrothermal H₂S range from −24.1 ± 0.3‰ to −21.0 ± 0.3‰. The δ¹⁸O values of hydrothermal fluids associated with mineralization fall within the range of basaltic rocks, meteoric waters, and sedimentary rocks. Geochemical variations in major and trace elements suggest the involvement of continental crustal contamination in the magmatic evolution. The studied volcanic rocks fall within the calc-alkaline to shoshonitic fields, formed in a continental arc setting, and are derived from an enriched mantle source influenced by subduction-related fluids. These rocks are characterized by HREE depletion, moderate LREE enrichment, and a weak negative Eu anomaly. Based on the results, the Sepid-Sarve deposit is classified as a stratabound (Manto-type) copper sulfide deposit, formed in a volcano-sedimentary setting associated with a subduction-related magmatic arc environment. Full article

Krenitsyn Peak is one of the two active volcanoes on Onekotan Island (Greater Kuril Ridge). The inaccessibility of the island, along with the volcano being situated within a sizeable (7 km in diameter) and cold (3.7 °C) caldera lake, has led to minimal research on the area. We present the first detailed characterization of the rocks from the only historical eruption of Krenitsyn Peak (November 1952) and a brief description of the ancient lava and pyroclastic density current (PDC) deposits that make up the building of the volcano. The 1952 eruptive products are represented by two-pyroxene andesites (59.2–63.3 wt.% SiO₂), and the older lava and pyroclastic flow rocks consist of two-pyroxene andesites and dacites (62–67.6 wt.% SiO₂). Almost all samples belong to the calc-alkaline, medium-K, and medium-Fe series, and the pumiceous lapilli from the 1952 eruption fall into the low-Fe series. The minerals exhibit signs of magma mingling, including relic high-Ca (up to An₉₂) plagioclase cores with signs of dissolution and recrystallization, and oscillatory-zoned pyroxene. Full article

Groundwater resources from the volcanic aquifers of northern Latium (central Italy) are widely used to supply local water needs and are mainly captured through wells. Nevertheless, despite the detailed hydrogeological knowledge of these aquifers, not enough information is available on the long-term pumping yield necessary to define the sustainable yield of a well. In this study, data from about 230 pumping tests (mainly step-drawdown and a few constant-flow-rate tests) performed in the volcanic aquifers of the Latium region were analyzed. Specifically, the aquifer formations intercepted by the wells are the fall and flow pyroclastic deposits of the Vico, Vulsini, and Sabatini volcanic districts; lava from the Vico, Cimino, and Vulsini volcanic districts; and Ignimbrite Cimina, one of the main pyroclastic products of the Cimino eruptions. These aquifers were grouped and analyzed by considering the type of permeability, hydrostratigraphic succession, and frequency and thickness of the aquifer horizons intercepted by wells. The results obtained in terms of specific capacity and transmissivity values are comparable among the identified different aquifer formations, showing a good correlation between the two parameters, a strong hydraulic heterogeneity (variability within five orders of magnitude), and variable responses regarding drawdown to pumping. This study highlights that the analysis of drawdown over time at a constant flow is fundamental in heterogeneous hydrogeological environments such as volcanic ones, where the trend in drawdown is often affected by the reduced spatial continuity of the most productive aquifer formations. Knowledge of the trend in drawdown over time, the thickness of the aquifer intercepted by the well, and the operating time of the well is an essential element in defining the sustainable yield of a well. Full article

A multidisciplinary study, including geomorphological, stratigraphic, paleontological and archaeological methods and techniques, allowed for a detailed exploration of coastal landforms and environments in front of the ancient city of Pompeii (southern Italy). The famous site of Pompeii sits on a small volcanic hill in the alluvial-coastal plain of the Sarno River, very close to the ancient paleoshoreline. When the Roman city was buried during the eruption of Vesuvius in 79 CE, pyroclastic fall and flow deposits covered the urban centres and ancient coastal landforms. In this study, 83 new boreholes were carried out up to a depth of 10 m. Some of them (15) were analysed for their sedimentological, stratigraphical and paleontological characterisation, in order to reconstruct the sedimentary environments in 79 CE. The data collected allow for new hypotheses to be formulated regarding the paleoshorelines, as well as the 79 CE coastal landforms and environments. In particular, litho-stratigraphic and fossil assemblages highlight the presence of shallow marine environments in a large back-ridge depression, named Masseria Curati, that is located just outside the city walls. This hypothesis opens new insights on the unknown location of the harbour of the Roman city. Full article

Feni is located at the southeastern end of the NW-trending Tabar–Lihir–Tanga–Feni (TLTF) volcanic island chain, in northeastern Papua New Guinea. This island chain is renowned for hosting alkaline volcanics, geothermal activity, copper–gold mineralization, and mining. There is no agreed consensus on the tectonic and petrogenetic evolution of Feni. Thus, the purpose of our paper is to present the geology of Feni within the context of the regional tectonic evolution of the TLTF chain and offer a succinct and generic geodynamic model that sets the stage for our next paper. The methodologies used in this study include a critical review of published and unpublished literature in conjunction with our geological observations on Feni. The Pliocene-to-Holocene TLTF chain is a younger arc situated within the greater Eocene-to-Oligocene Melanesian Arc bounded by New Ireland to the west, the Kilinailau Trench and Ontong Java Plateau in the east, and the New Britain Trench to the south. The geological units mapped on Feni include a large volume of basaltic lava flow and trachyandesite stocks intruding a limestone and siltstone basement. Younger units include the trachyte domes, pyroclastic flow, and ash fall deposits. The major structures on Feni are normal or extensional faults such as the Niffin Graben. Feni magmatism is attributed to the petrogenetic processes of polybaric or decompression melting and crystal fractionation of magmas previously influenced by sediment assimilation, mantle wedge metasomatism, slab tears, slab melts, and subduction. Deep lithospheric normal faults provide the fluid pathways for the Feni alkaline magmas. Full article

This is the first study discussing the dynamics of two caldera-forming eruptions in the Banda volcanic complex (BVC) in the marine conservation zone of Banda, Maluku, Indonesia. The first and second caldera episodes are, hereafter, termed as Banda Besar and Naira, respectively. The formation of Banda Besar caldera (ca. 8 × 7 km) ejected homogeneous rhyolitic magmas (bulk-rock, 73.1–73.8 wt.% SiO₂) in the following three stages: (1) sub-Plinian (BB-5a), (2) intra-sub-Plinian flow (BB-5b), and (3) caldera collapse (BB-5c and BB-5d). The BB-5a stage produced a reversely graded white pumice fall layer with moderate lithics (2–11%), which originated from a sub-Plinian eruption with an estimated plume height of 22–23 km. Subsequently, intensive erosion of wall rock (13–25%) causes conduit enlargement, leading to the partial collapse of the eruption columns, forming intra-sub-Plinian flow deposits (BB-5b). It is likely that conduit size surpassed the minimum threshold value for a buoyant plume during the final phase of the second stage, causing the complete formation of a pumice-rich pyroclastic density current (PDC) during the early-third stage (BB-5c). Finally, the evacuation of voluminous magma from the reservoir yields the first caldera collapse during the late-third stage, producing a lithic-dominated PDC with minor pumices (BB-5d). The formation of the Naira caldera (ca. 3 × 3 km) ejected homogeneous dacitic magmas (bulk-rock, 66.2–67.2 wt.% SiO₂) in the following three stages: (1) early sub-Plinian (N-2a and 2b), (2) late sub-Plinian (N-2c, 2d, 2e), and (3) caldera collapse (N-2f). This research distinguishes the sub-Plinian into two stages on the basis of different vent locations (assumed from the isopach map). In particular, this research suggests that the early sub-Plinian stage (N-2a and 2b) erupted from the northern vent, producing 14 and 8 km eruption plume heights, respectively. Additionally, the late sub-Plinian stage (N-2c, 2d, 2e) was generated from a newly-formed conduit located in the relatively southern position, producing 12–17, 9, and 6 km eruption plume heights, respectively. Conduit enlargement is expected to occur during at both sub-Plinian stages, as lithic portions are considerably high (10–72%) and ultimately generate PDCs during the third stage (caldera collapse; N-2f). Because most of the erupted materials (for both caldera-forming eruptions) are emplaced in the ocean, estimating the erupted volume becomes difficult. However, with the assumption that the caldera dimension represents the erupted volume of magma (V_magma), and that the total erupted volume (V_total) is a summation of V_magma and the now-vanished pre-caldera island (V_vanished, represented by average lithic fractions), the first and second caldera might produce (at least) 35.2 and 2.4 km³ of erupted materials, scaling them as VEI (volcano explosivity index) 6 and 5, respectively. That VEI is more than enough to initiate a secondary hazard in the form of tsunamis triggered by volcanic activities. Full article

Evidence of volcaniclastic sedimentation occurs in the first depositional sequence of the sedimentary succession of the Amantea Basin. Volcaniclastic deposits are intercalated in the upper part of a sandstone formation and these show a maximum thickness of about 8 m. The Amantea Basin is a Neogene depozone located along the Tyrrhenian margin of Calabria whose onset started during the Upper Serravallian. The source volcano to these materials had to have been located within or near to the marine basin in order to supply it with significant amounts of pyroclastic fragments emplaced by either pyroclastic fall/or flows during one or more explosive eruptions. The marine environment of volcaniclastic flows made up of pyroclastic fragments mixed with minor siliciclastic and carbonate material. The textural and structural features of the deposits and the composition of the volcanic glass fragments indicate an origin from a sub-aerial coeval explosive eruption, with initial sedimentation in a shallow marine environment, mixing with non-volcanic materials, reworking and final re-sedimentation into the basin. The age of the volcaniclastic/sedimentary sequence makes these deposits a marker for the geodynamic evolution of the area, and the lack of such horizons in the other coeval peri-Tyrrhenian basins allows us to consider the Amantea Basin as a confined elongated coastal basin area, whose tectonostratigraphic architecture denotes a structural partitioning of the eastern nascent Tyrrhenian Basin. Full article

Resuspension of pyroclastic deposits occurs under specific atmospheric and environmental conditions and typically prolongs and exacerbates the impact associated with the primary emplacement of tephra fallout and pyroclastic density current deposits. An accurate forecasting of the phenomenon, to support Volcanic Ash Advisory Centers (VAACs) and civil aviation management, depends on adapting volcanic ash transport and dispersion models to include specific ash emission schemes. Few studies have attempted to model the mechanisms of emission and transport of windblown volcanic ash, and a systematic study of observed cases has not been carried out yet. This manuscript combines numerical simulations along with a variety of observational data to examine the general features of ash resuspension events in northern Patagonia following the 2011 Cordón Caulle eruption (Chile). The associated outcomes provide new insights into the spatial distribution of sources, frequency of events, transport patterns, seasonal and diurnal variability, and spatio-temporal distribution of airborne ash. A novel modelling approach based on the coupling between Advanced Research core of the Weather Research and Forecasting (WRF-ARW) and FALL3D models is presented, with various model improvements that allow overcoming some limitations in previous ash resuspension studies. Outcomes show the importance of integrating source information based on field measurements (e.g., deposit grain size distribution and particle density). We provide evidence of a strong diurnal and seasonal variability associated with the ash resuspension activity in Patagonia. According to the modelled emission fluxes, ash resuspension activity was found to be significantly more intense during daytime hours. Satellite observations and numerical simulations strongly suggest that major emission sources of resuspended ash were distributed across distal areas (>100 $\mathrm{km}$ from the vent) of the Patagonian steppe, covered by a thin layer of fine ash. The importance of realistic soil moisture data to properly model the spatial distribution of emission sources is also highlighted. Full article

Air-fall pyroclastic deposits on steep slopes in Campania (Southern Italy) are periodically subjected to rainfall-induced landslides that may evolve into catastrophic flowslides. To protect built-up areas, early warning systems (EWSs) have been implemented which are essentially based on pluviometric thresholds or models unable to accurately monitor the physical phenomena responsible for flowslide generation in pyroclastic deposits. Over the last 20 years, landslides with no evolution in flows occurred in this area and the alarms generated by existing EWSs in the cases of rainfall were both false and highly costly, thus eroding public trust in EWSs. To improve existing EWSs, two complex models for pyroclastic soils (Cervinara and Sarno) are proposed in this paper. These two models allow correct simulation of the physical processes, such as saturation increase due to rainwater infiltration and mechanical degradation as far as undrained instability, which govern postfailure evolution. The paper concludes with the presentation of a framework proposal to be used in defining a soil database, as well as a framework for flowslide generation forecast to be used for implementation within EWSs. Full article

The pyroclastic fall deposits mantling mountain slopes in the Campania region (Southern Italy) represent one of the most studied geomorphological frameworks of the world regarding rainfall-induced debris flows threating urban areas. The proposed study focused on advancing knowledge about the hydrological response of pyroclastic fall coverings from the seasonal to event-based time scales, leading to the initiation of slope instability. The study was based on two consequential tasks. The first was the analysis of a six-year monitoring of soil pressure head carried out in a sample area of the Sarno Mountains, located above a debris flow initiation zone. The second was based on coupled hydrological and slope stability modeling performed on the physical models of slopes, which were reconstructed by empirical correlations between the slope angle, total thickness, and stratigraphic settings of pyroclastic fall deposits mantling slopes. The results obtained were: (a) The understanding of a soil pressure head regime of the volcaniclastic soil mantle, always ranging in unsaturated conditions and characterized by a strong seasonal variability depending on precipitation patterns and the life cycle of deciduous chestnut forest; and (b) the reconstruction through a deterministic approach of seasonal intensity–duration rainfall thresholds related to different morphological conditions. Full article

Shiveluch (Kamchatka, Russia) is the most active andesitic volcano of the Kuril-Kamchatka arc, typically exhibiting near-continual high-temperature fumarolic activity and periods of exogenous lava dome emplacement punctuated by discrete large explosive eruptions. These eruptions can produce large pyroclastic flow (PF) deposits, which are common on the southern flank of the volcano. Since 2000, six explosive eruptions have occurred that generated ash fall and PF deposits. Over this same time period, the Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) instrument has been acquiring image-based visible/near infrared (VNIR), short wave infrared (SWIR) and thermal infrared (TIR) data globally, with a particular emphasis on active volcanoes. Shiveluch was selected as an ASTER target of interest early in the mission because of its frequent activity and potential impact to northern Pacific air transportation. The north Pacific ASTER archive was queried for Shiveluch data and we present results from 2000 to 2009 that documents three large PF deposits emplaced on 19 May 2001, 9 May 2004, and 28 February 2005. The long-term archive of infrared data provides an excellent record on the changing activity and eruption state of the volcano. Full article