Search Results (251)

This study investigates indoor and outdoor air quality monitoring in a student dormitory located in northern Milan (Italy) using low-cost sensors. This research compares two monitoring periods in June and October 2024 to examine common PM_2.5 vertical patterns and differences at the building level, as well as their influence on the indoor spaces at the corresponding positions. In each period, around 30 sensors were installed at various heights and orientations across indoor and outdoor spots for 2 weeks to capture spatial variations around the building. Meanwhile, qualitative surveys on occupation presence, satisfaction, and well-being were distributed in selected rooms. The analysis of PM_2.5 data reveals that the building’s lower floors tended to have slightly higher outdoor PM_2.5 concentrations, while the upper floors generally had lower PM_2.5 indoor/outdoor (I/O) ratios, with the top-floor rooms often below 1. High outdoor humidity reduced PM infiltration, but when outdoor PM fell below 20 µg/m³ in these two periods, indoor sources became dominant, especially on the lower floors. Air pressure I/O differences had minimal impact on PM_2.5 I/O ratios, though slightly positive indoor pressure might help prevent indoor PM infiltration. Lower ventilation in Period-2 possibly contributed to more reported symptoms, especially in rooms with higher PM from shared kitchens. While outdoor air quality affects IAQ, occupant behavior—especially window opening and ventilation management—remains crucial in minimizing indoor pollutants. Users can also manage exposure by ventilating at night based on comfort and avoiding periods of high outdoor PM. Full article

Porous materials are characterized by the pore surface area (S) and volume (V) accessible to a confined fluid. For mesoporous materials NMR measurements of diffusion are used to assess the S/V ratio, because at short times, only the diffusivity of molecules in the adsorbed layer is affected by confinement and the fractional population of these molecules is proportional to the S/V ratio. For materials with sub-nanometer pores, this might not be true, as the adsorbed layer can encompass the entire pore volume. Here, using molecular simulations, we explore the role played by S and S/V in determining the dynamical behavior of two carbon-bearing fluids—CO₂ and ethane—confined in sub-nanometer pores of silica. S and V in a silicalite model representing a sub-nanometer porous material are varied by selectively blocking a part of the pore network by immobile methane molecules. Three classes of adsorbents were thus obtained with either all of the straight (labeled ‘S-major’) or zigzag channels (‘Z-major’) remaining open or a mix of a fraction of both types of channel blocked, resulting in half of the total pore volume being blocked (‘Half’). While the adsorption layers from opposite surfaces overlap, encompassing the entire pore volume for all pores except the intersections, the diffusion coefficient is still found to be reduced at high S/V, especially for CO₂, albeit not so strongly as would be expected in the case of wider pores. This is because of the presence of channel intersections that provide a wider pore space with non-overlapping adsorption layers. Full article

The Latin American and Caribbean (LAC) region faces persistent challenges of inequality, climate change vulnerability, and deteriorating air quality. The Aburrá Valley, where Medellín is located, is a narrow tropical valley with complex topography, strong thermal inversions, and unstable atmospheric conditions, all of which exacerbate the accumulation of pollutants. In Medellín, ${\mathrm{NO}}_2$ concentrations have remained nearly unchanged over the past eight years, consistently approaching critical thresholds, despite the implementation of air quality control strategies. These persistent high concentrations are closely linked to the variability of the atmospheric boundary layer (ABL) and are often intensified by prolonged dry periods. This study focuses on a representative street canyon in Medellín that has undergone recent urban interventions, including the construction of new public spaces and pedestrian areas, without explicitly considering their impact on ${\mathrm{NO}}_x$ dispersion. Using Computational Fluid Dynamics (CFD) simulations, this work evaluates the influence of urban morphology on ${\mathrm{NO}}_x$ accumulation. The results reveal that areas with high Aspect Ratios (AR > 0.65) and dense vegetation exhibit reduced wind speeds at the pedestrian level—up to 40% lower compared to open zones—and higher ${\mathrm{NO}}_2$ concentrations, with maximum simulated values exceeding 50 μg/m³. This study demonstrates that the design of pedestrian corridors in complex urban environments like Medellín can unintentionally create pollutant accumulation zones, underscoring the importance of integrating air quality considerations into urban planning. The findings provide actionable insights for policymakers, emphasizing the need for comprehensive modeling and field validation to ensure healthier urban spaces in cities affected by persistent air quality issues. Full article

This study investigates the downstream wake characteristics of a helical hydrokinetic turbine through combined experimental and numerical analyses. A four-bladed helical turbine with a 20 cm rotor diameter and blockage ratio of 53.57% was tested in an open water channel under a flow rate of 180 m³/h, corresponding to a Reynolds number of approximately 90 × 10³. Velocity measurements were collected at 13 downstream cross-sections using an Acoustic Doppler Velocimeter, with each point sampled repeatedly. Standard error analysis was applied to quantify measurement uncertainty. Complementary numerical simulations were conducted in ANSYS Fluent using a steady-state k-ω Shear Stress Transport (SST) turbulence model, with a mesh of 4.7 million elements and mesh independence confirmed. Velocity deficit and turbulence intensity were employed as primary parameters to characterize the wake structure, while the analysis also focused on the recovery of cross-sectional velocity profiles to validate the extent of wake influence. Experimental results revealed a maximum velocity deficit of over 40% in the near-wake region, which gradually decreased with downstream distance, while turbulence intensity exceeded 50% near the rotor and dropped below 10% beyond 4 m. In comparison, numerical findings showed a similar trend but with lower peak velocity deficits of 16.6%. The root mean square error (RMSE) and mean absolute error (MAE) between experimental and numerical mean velocity profiles were calculated as 0.04486 and 0.03241, respectively, demonstrating reasonable agreement between the datasets. Extended simulations up to 30 m indicated that flow profiles began to resemble ambient conditions around 18–20 m. The findings highlight the importance of accurately identifying the downstream distance at which the wake effect fully dissipates, as this is crucial for determining appropriate inter-turbine spacing. The study also discusses potential sources of discrepancies between experimental and numerical results, as well as the limitations of the modeling approach. Full article

Urban blue–green space (UBGS) plays a critical role in mitigating the urban heat island (UHI) effect and reducing land surface temperatures (LSTs). However, existing research has not sufficiently explored the optimization of UBGS spatial configurations or their interactions with urban morphology. This study takes New York City as a case and systematically investigates small-scale urban cooling strategies by integrating multiple factors, including adjustments to the blue–green ratio, spatial layouts, vegetation composition, building density, building height, and layout typologies. We utilize multi-source geographic data, including LiDAR derived land cover, OpenStreetMap data, and building footprint data, together with LST data retrieved from Landsat imagery, to develop a prediction model based on generative adversarial networks (GANs). This model can rapidly generate visual LST predictions under various configuration scenarios. This study employs a combination of qualitative and quantitative metrics to evaluate the performance of different model stages, selecting the most accurate model as the final experimental framework. Furthermore, the experimental design strictly controls the study area and pixel allocation, combining manual and automated methods to ensure the comparability of different ratio configurations. The main findings indicate that a blue–green ratio of 3:7 maximizes cooling efficiency; a shrub-to-tree coverage ratio of 2:8 performs best, with tree-dominated configurations outperforming shrub-dominated ones; concentrated linear layouts achieve up to a 10.01% cooling effect; and taller buildings exhibit significantly stronger UBGS cooling performance, with super-tall areas achieving cooling effects approximately 31 percentage points higher than low-rise areas. Courtyard layouts enhance airflow and synergistic cooling effects, whereas compact designs limit the cooling potential of UBGS. This study proposes an innovative application of GANs to address a key research gap in the quantitative optimization of UBGS configurations and provides a methodological reference for sustainable microclimate planning at the neighborhood scale. Full article

Blue–green infrastructure is widely recognized for mitigating the urban heat island effect. However, most existing ENVI-met 5.6.1 studies focus on average thermal conditions and overlook fine-scale spatial gradients. This study investigates the urban park in Luoyang City by integrating high-resolution 3D ENVI-met simulations, multi-source data, and field measurements to quantify thermal gradients between park interiors and surrounding built-up areas. A midline cut-off approach was applied to extract horizontal and vertical thermal profiles. The results show that (1) temperature and physiological equivalent temperature (PET) differences are most pronounced at park edges and transition zones, where vegetation and water bodies serve as natural cooling buffers; (2) urban form indicators, especially the building coverage and open space ratio, significantly impact wind speed and the PET, with greenery improving thermal comfort via shading and evapotranspiration, while impervious surfaces intensify heat stress; (3) the park exhibits a distinct cold island effect, with the average PET in the core area up to 12.3 °C lower than in adjacent built-up zones. The effective cooling distance, which is identified through buffer-based zonal statistics, rapidly attenuates within approximately 200 m from the park boundary. These findings offer a novel spatial perspective on thermal regulation mechanisms of urban landscapes and provide quantitative evidence to guide the design of climate-resilient green infrastructure. Full article

Lecture halls are characterized by large spatial dimensions, deep floor plans, and high occupant densities. Lectures are typically conducted using multimedia and blackboard-based teaching, placing higher demands on the indoor light and thermal environment compared to standard classrooms. This study aims to simulate the interrelationships between multiple building envelope parameters and building performance, in order to improve visual and thermal comfort while reducing energy consumption in cold-region lecture halls. Based on seven key envelope parameters—including openable window area ratio, west-facing window-to-wall ratio, exterior insulation thickness, shading element spacing, angle and width, and window glass type—a multi-objective optimization framework was established. The optimization process targeted three key performance indicators—useful daylight illuminance (UDI), energy use intensity (EUI), and thermal comfort percentage (TCP)—in the context of a stepped classroom. The results show that increasing the thickness of exterior insulation and reducing the width of shading components contribute positively to photothermal comfort without compromising thermal and visual performance. Compared with the baseline design, optimized schemes that incorporate appropriate west-facing window-to-wall ratios, openable window areas, insulation thicknesses, and external shading designs can reduce annual energy consumption by up to 10.82%, and increase UDI and TCP by 12.79% and 36.41%, respectively. These improvements are also found to be economically viable. Full article

For cold venting processes frequently employed in oil and gas fields, precisely predicting the instantaneous diffusion process of the vented explosive and/or toxic gases is of great importance, which cannot be captured by the Reynolds-averaged Navier–Stokes (RANS) method. In this paper, the large eddy simulation (LES) method is introduced for gas diffusion in an open space, and the diffusion characteristics of the sulfur-containing natural gas in the cold venting process is analyzed numerically. Firstly, a LES solution procedure of compressible gas diffusion is proposed based on the ANSYS Fluent 2022, and the numerical solution is verified using benchmark experiments. Subsequently, a computational model of the sulfur-containing natural gas diffusion process under the influence of a wind field is established, and the effects of wind speed, sulfur content, the venting rate and a downstream obstacle on the natural gas diffusion process are analyzed in detail. The results show that the proposed LES with the DSM sub-grid model is able to capture the transient diffusion process of heavy and light gases released in turbulent wind flow; the ratio between the venting rate and wind speed has a decisive influence on the gas diffusion process: a large venting rate increases the vertical diffusion distance and makes the gas cloud fluctuate more, while a large wind speed decreases the vertical width and stabilizes the gas cloud; for an obstacle located closely downstream, the venting pipe makes the vented gas gather on the windward side and move toward the ground, increasing the risk of ignition and poisoning near the ground. The LES solution procedure provides a more powerful tool for simulating the cold venting process of natural gas, and the results obtained could provide a theoretical basis for the safety evaluation and process optimization of sulfur-containing natural gas venting. Full article

Probabilistic models are used to describe random processes and quantify prediction uncertainties in a principled way. Examples include geotechnical and geological investigations that seek to model subsurface hydrostratigraphic properties or mineral deposits. In mining geology, model validation efforts have generally lagged behind the development and deployment of computational models. One problem is the lack of industry guidelines for evaluating the uncertainty and predictive performance of probabilistic ore grade models. This paper aims to bridge this gap by developing a holistic approach that is autonomous, scalable and transferable across domains. The proposed model assessment targets three objectives. First, we aim to ensure that the predictions are reasonably calibrated with probabilities. Second, statistics are viewed as images to help facilitate large-scale simultaneous comparisons for multiple models across space and time, spanning multiple regions and inference periods. Third, variogram ratios are used to objectively measure the spatial fidelity of models. In this study, we examine models created by ordinary kriging and the Gaussian process in conjunction with sequential or random field simulations. The assessments are underpinned by statistics that evaluate the model’s predictive distributions relative to the ground truth. These statistics are standardised, interpretable and amenable to significance testing. The proposed methods are demonstrated using extensive data from a real copper mine in a grade estimation task and are accompanied by an open-source implementation. The experiments are designed to emphasise data diversity and convey insights, such as the increased difficulty of future-bench prediction (extrapolation) relative to in situ regression (interpolation). This work enables competing models to be evaluated consistently and the robustness and validity of probabilistic predictions to be tested, and it makes cross-study comparison possible irrespective of site conditions. Full article

Malware remains a central tool in cyberattacks, and systematic research into adversarial attack techniques targeting malware is crucial in advancing detection and defense systems that can evolve over time. Although numerous review articles already exist in this area, there is still a lack of comprehensive exploration into emerging artificial intelligence technologies such as reinforcement learning from the attacker’s perspective. To address this gap, we propose a foundational reinforcement learning (RL)-based framework for adversarial malware generation and develop a systematic evaluation methodology to dissect the internal mechanisms of generative models across multiple key dimensions, including action space design, state space representation, and reward function construction. Drawing from a comprehensive review and synthesis of the existing literature, we identify several core findings. (1) The scale of the action space directly affects the model training efficiency. Meanwhile, factors such as the action diversity, operation determinism, execution order, and modification ratio indirectly influence the quality of the generated adversarial samples. (2) Comprehensive and sensitive state feature representations can compensate for the information loss caused by binary feedback from real-world detection engines, thereby enhancing both the effectiveness and stability of attacks. (3) A multi-dimensional reward signal effectively mitigates the policy fragility associated with single-metric rewards, improving the agent’s adaptability in complex environments. (4) While the current RL frameworks applied to malware generation exhibit diverse architectures, they share a common core: the modeling of discrete action spaces and continuous state spaces. In addition, this work explores future research directions in the area of adversarial malware generation and outlines the open challenges and critical issues faced by defenders in responding to such threats. Our goal is to provide both a theoretical foundation and practical guidance for building more robust and adaptive security detection mechanisms. Full article

Indoor environmental quality profoundly impacts student learning outcomes and teacher effectiveness, particularly in primary education, where children spend most of their developmental years. The study compares the New Zealand Ministry of Education’s Designing Quality Learning Spaces (DQLS) version 2.0 for primary school classrooms with international standards set by OECD countries to develop IAQ and thermal comfort best practices in New Zealand across six climate zones. The research evaluates indoor air quality (IAQ) and thermal comfort factors affecting students’ and teachers’ health and performance. Using Ladybug and Honeybee plugin tools in Grasshopper with Energy Plus, integrated into Rhino 7 software, the study employed advanced building optimisation methods, using multi-criteria optimisation and parametric modelling. This approach enabled a comprehensive analysis of building envelope parameters for historical classroom designs, the Avalon block (constructed between 1955 and 2000). Optimise window-to-wall ratios, ceiling heights, window placement, insulation values (R-values), clothing insulation (Clo), and window opening schedules. Our findings demonstrate that strategic modifications to the building envelope can significantly improve occupant comfort and energy performance. Specifically, increasing ceiling height by 0.8 m, raising windows by 0.3 m vertically, and reducing the window-to-wall ratio to 25% created optimal conditions across multiple performance criteria. These targeted adjustments improved adaptive thermal comfort, ventilation, carbon dioxide, and energy efficiency while maintaining local and international standards. The implications of the findings extend beyond the studied classrooms, offering evidence-based strategies for overall design and building performance guidelines in educational facilities. This research demonstrates the efficacy of applying computational design optimisation during early design phases, providing policymakers and architects with practical solutions that could inform future revisions of New Zealand’s school design standards and align them more closely with international best practices for educational environments. Full article

The rapid development of urban subway network is prompting higher requirements for daylighting in subway stations. The skylight daylighting space of shallow buried subway stations not only improves the quality of light environment but also brings challenges for the optimization of light and thermal performance, especially in areas with hot summers and cold winters. In this paper, key parameters such as illumination, air temperature, and the black sphere temperature of skylight and artificial lighting areas at stations A and B in Shanghai were tested with a field test system. The results show that the light environment in the skylight areas was significantly improved, but the need for regulation and control of the thermal environment increased. Combined with response surface analysis, 10 sample models for two types of daylighting space (partitioned and open atrium styles) were studied and constructed, including 254 simulated working conditions. The results reveal that design parameters such as the number, aspect ratio, depth of light openings, and skylight angle have significant effects on combined energy consumption. The decentralized double slope roof daylighting space has the best performance in partitioned and open atrium-style public areas, and combined energy consumption can be reduced to 385.14 kWh/m². The optimization strategies proposed in this study can provide a quantitative basis for the skylight design of shallow buried subway stations and an important reference for the design of low-carbon and energy-saving underground spaces. Full article

Phyllosticta fragaricola-induced angular leaf spot causes substantial economic losses in global strawberry production, necessitating advanced severity assessment methods. This study proposed a dual-phase grading framework integrating deep learning and computer vision. The enhanced You Only Look Once version 11 (YOLOv11) architecture incorporated a Content-Aware ReAssembly of FEatures (CARAFE) module for improved feature upsampling and a squeeze-and-excitation (SE) attention mechanism for channel-wise feature recalibration, resulting in the YOLOv11-CARAFE-SE for the severity assessment of strawberry angular leaf spot. Furthermore, an OpenCV-based threshold segmentation algorithm based on H-channel thresholds in the HSV color space achieved accurate lesion segmentation. A disease severity grading standard for strawberry angular leaf spot was established based on the ratio of lesion area to leaf area. In addition, specialized software for the assessment of disease severity was developed based on the improved YOLOv11-CARAFE-SE model and OpenCV-based algorithms. Experimental results show that compared with the baseline YOLOv11, the performance is significantly improved: the box mAP@0.5 is increased by 1.4% to 93.2%, the mask mAP@0.5 is increased by 0.9% to 93.0%, the inference time is shortened by 0.4 ms to 0.9 ms, and the computational load is reduced by 1.94% to 10.1 GFLOPS. In addition, this two-stage grading framework achieves an average accuracy of 94.2% in detecting selected strawberry horn leaf spot disease samples, providing real-time field diagnostics and a high-throughput phenotypic analysis for resistance breeding programs. This work demonstrates the feasibility of rapidly estimating the severity of strawberry horn leaf spot, which will establish a robust technical framework for strawberry disease management under field conditions. Full article

This study collected site and spatial morphological data from 63 typical aging community activity spaces and extracted 12 spatial types through statistical analysis. A parametric modeling tool was used to generate spatial models. Based on clearly defined design variables and constraints, the NSGA-II multi-objective optimization algorithm was applied to minimize summer thermal discomfort, maximize winter thermal comfort, and maximize annual average sunlight duration, resulting in 342 Pareto optimal solutions. The study first explored the linear relationships between spatial morphology and environmental performance using the Spearman method. It then integrated ensemble learning and the interpretable machine learning model SHAP to reveal nonlinear relationships and boundary effects. The results of the two methods complemented and reinforced each other. Based on a comparison of these two approaches, morphological indicators showing significant differences were selected for attribution and sensitivity analyses, clarifying the mechanisms by which spatial morphological parameters influence environmental performance and identifying their critical thresholds. Key findings include the following: (1) the UTCI-S exhibits significant negative linear correlations with the open space ratio (OSR) and spatial crowding density (SCD); the UTCI-W shows negative linear correlations with canopy coverage (CVH) and wind speed (WS); and a positive linear correlation exists between the sky view factor (SVF) and AV.SH. (2) Boundary effects and threshold intervals of critical morphological parameters were identified as follows. The open space ratio should be controlled to 10–15%, the shrub–tree layer coverage to 0.013–0.0165%, and the average building height to 3.1–3.8 m. (3) Spatial layout principles demonstrate that placing fully enclosed spaces (E-2) and semi-enclosed spaces (S-1/S-3) on the northern side, as well as semi-enclosed spaces (S-1/S-2) and circulation spaces (C-3) on the southern side, significantly enhance microclimatic performance. These findings provide quantitative guidelines for community space design in cold regions and offer data support for creating outdoor environments that meet the comfort needs of the elderly. Full article

Multi-floored grain warehouses are widely used in China due to their efficient space utilization and high storage capacity. This study evaluates the seismic performance of such structures using a Composite Structure of Steel and Concrete (CSSC) system under various grain-loading conditions. A finite element model was developed in OpenSees based on actual loading scenarios, with both pushover and time history analyses conducted. Results show that the EEF condition (E = Empty, F = Full; top–middle–bottom = Empty–Empty–Full) leads to a 35.14% increase in peak base shear compared to the FEE condition (grain on the top floor only). Capacity spectrum analysis indicates that EEF provides higher initial stiffness and lower displacement across all performance points. Time history results reveal that configurations with lighter upper mass (EFF, EEE) are more prone to top-floor acceleration amplification, while FFF and FFE demonstrate more stable responses due to balanced mass distribution. The maximum inter-story drift consistently occurs at the second floor, with FFF and FFE showing the most significant deformation. All drift ratios meet code limits, confirming the safety and applicability of the CSSC system under various storage scenarios. Full article