Search Results (949)

Background and Objectives: Surgical smoke generated by energy devices during surgery contains hazardous substances and poses health risks to staff in the operating room. Exposure to surgical smoke must be reduced to minimize the risk of health hazards. Many studies have evaluated surgical smoke qualitatively, but few have performed quantitative assessment. The aim of this study was to quantify the number of particles generated during various breast surgery procedures. Materials and Methods: In this prospective, randomized study, breast surgeries performed at Tokyo Medical and Dental University Hospital (the present Institute of Science Tokyo Hospital) between December 2022 and August 2023 were randomly assigned to two groups: the electrosurgical device group and the electrosurgical device with smoke evacuator group. The number of particles generated by energy devices during surgery was measured using a particle counter. Results: Surgical smoke was generated in all procedures. The number of measured particles was significantly less in the electrosurgical device with smoke evacuator group than in the electrosurgical device group during all procedures (all p < 0.001). Conclusions: All breast surgery procedures produced a significant amount of surgical smoke, which was effectively reduced by using an electrosurgical device with a smoke evacuator. These findings support the routine use of smoke evacuators in breast surgery to reduce occupational exposure to hazardous particles. Implementation of such devices could improve operating room safety and may inform future guidelines and institutional policies regarding surgical smoke management. Full article

Background and Objectives: Multiple sclerosis (MS) is a chronic immune-mediated neurological disorder that primarily affects young adults and is frequently accompanied by psychiatric comorbidities such as depression and anxiety, both of which significantly diminish patients’ quality of life (QoL). This study investigated the effect of two oral disease-modifying therapies (DMTs), fingolimod and cladribine, on mental health and QoL in patients with relapsing-remitting MS (RRMS). The aim of the study was to compare levels of depression, anxiety, and health-related quality of life (HRQoL) in RRMS patients treated with fingolimod or cladribine, and to evaluate their associations with clinical and radiological parameters. Materials and Methods: Eighty RRMS patients aged 18 to 50 years with Expanded Disability Status Scale (EDSS) scores of 3.0 or less, no recent disease relapse, and no history of antidepressant use were enrolled. Forty patients were treated with fingolimod and forty with cladribine. Depression and anxiety were assessed using the Hamilton Depression Rating Scale (HDRS) and the Hamilton Anxiety Rating Scale (HARS). QoL was evaluated using the Multiple Sclerosis QoL-54 (MSQOL-54) instrument. Additional clinical data, including MRI-based lesion burden, EDSS scores, age, disease duration, and occupational status, were collected. Results: No statistically significant differences were observed between the two groups regarding HDRS and HARS scores (p > 0.05). However, patients treated with fingolimod had significantly higher scores in the Energy/Fatigue subdomain (7.55 ± 2.02 vs. 6.56 ± 2.57, p = 0.046) and Composite Mental Health (CMH) score (64.73 ± 15.01 vs. 56.00 ± 18.93, p = 0.029) compared to those treated with cladribine. No significant differences were found in the independent items of the MSQOL-54. A negative correlation was identified between total lesion load and QoL scores. Conclusions: Although fingolimod and cladribine exert comparable effects on depression and anxiety levels, fingolimod may be associated with better mental health outcomes and reduced fatigue in RRMS patients. Furthermore, lesion burden and clinical parameters such as age and EDSS score may independently influence QoL, regardless of the DMT used. Full article

The European Union Council’s zero vision aims to eliminate workplace fatalities, while Industry 4.0 presents new challenges for occupational safety. Despite HR professionals assessing managers’ and employees’ competencies, no system currently exists to evaluate the competencies of workers’ representatives in occupational safety and health (OSH). It is crucial to establish the necessary competencies for these representatives to avoid their selection based on personal bias, ambition, or coercion. The main objective of the study is to identify the competencies and their components required for workers’ representatives in the field of occupational safety and health by following the steps of the DACUM method with the assistance of OSH professionals. First, tasks were identified through semi-structured interviews conducted with eight occupational safety experts. In the second step, a focus group consisting of 34 OSH professionals (2 invited guests and 32 volunteers) determined the competencies and their components necessary to perform those tasks. Finally, the results were validated through an online questionnaire sent to the 32 volunteer participants of the focus group, from which 11 responses (34%) were received. The research categorized the competencies into the following three groups: core competencies (occupational safety and professional knowledge) and distinguishing competencies (personal attributes). Within occupational safety knowledge, 10 components were defined; for professional expertise, 7 components; and for personal attributes, 16 components. Based on the results, it was confirmed that all participants of the tripartite system have an important role in the training and development of workers’ representatives in the field of occupational safety and health. The results indicate that although OSH representation is not yet a priority in Hungary, there is a willingness to collaborate with competent, well-prepared representatives. The study emphasizes the importance of clearly defining and assessing the required competencies. Full article

Cancer disparities in low- and middle-income countries (LMICs) arise from multifaceted interactions between environmental exposures, infectious agents, and systemic inequities, such as limited access to care. The exposome, a framework encompassing the totality of non-genetic exposures throughout life, offers a powerful lens for understanding these disparities. In LMICs, populations are disproportionately affected by air and water pollution, occupational hazards, and oncogenic infections, including human papillomavirus (HPV), hepatitis B virus (HBV), Helicobacter pylori (H. pylori), human immunodeficiency virus (HIV), and neglected tropical diseases, such as schistosomiasis. These infectious agents contribute to increased cancer susceptibility and poor outcomes, particularly in immunocompromised individuals. Moreover, climate change, food insecurity, and barriers to healthcare access exacerbate these risks. This review adopts a population-level exposome approach to explore how environmental and infectious exposures intersect with genetic, epigenetic, and immune mechanisms to influence cancer incidence and progression in LMICs. We highlight the critical pathways linking chronic exposure and inflammation to tumor development and evaluate strategies such as HPV and HBV vaccination, antiretroviral therapy, and environmental regulation. Special attention is given to tools such as exposome-wide association studies (ExWASs), which offer promise for exposure surveillance, early detection, and public health policy. By integrating exposomic insights into national health systems, especially in regions such as sub-Saharan Africa (SSA) and South Asia, LMICs can advance equitable cancer prevention and control strategies. A holistic, exposome-informed strategy is essential for reducing global cancer disparities and improving outcomes in vulnerable populations. Full article

Sleep is crucial to overall health and plays a significant role in skin function. While the circadian rhythm has been extensively researched for its impact on the body’s optimal functioning, the skin also possesses an independent circadian system that serves many important functions. Sleep disruptions or deprivation can significantly affect skin conditions, by compromising the skin barrier and impairing processes such as collagen production, cellular repair, and wound healing. Given the commonality of sleep disturbances, it is crucial to understand the connection between sleep, circadian regulation, and skin health. This is particularly important in understudied populations, such as those with occupational sleep disruption and individuals with hormone-related conditions like PCOS and menopause. Bidirectional relationships have been established between sleep and several inflammatory skin conditions, including atopic dermatitis, psoriasis, rosacea, and hidradenitis suppurativa. While acne is influenced by sleep, the reverse relationship, how acne affects sleep quality, has not been well established. Chronic sleep disruption can increase cortisol levels and oxidative stress, both of which contribute to skin aging and the progression of autoimmune skin conditions, including systemic lupus erythematosus. As sleep is a modifiable risk factor, it is crucial to consider therapeutic options and interventions to prevent or alleviate skin conditions. This review discusses various therapeutic approaches, including melatonin, L-Theanine, Magnesium-L-threonate, Inositol, Cinnamomi cortex, nervous system regulation, and proper sleep hygiene. These therapeutic options have been studied for their impact on sleep, and importantly, several have been evaluated for their utility as adjuncts for treating skin conditions. Overall, the relationship between sleep and skin health is clear, and incorporating sleep-focused therapeutic interventions offers potential to improve both sleep quality and skin health in individuals with a variety of skin conditions. Full article

Introduction: Poorly designed safety job descriptions may have a negative impact on occupational safety and health (OSH) performance. Firstly, they limit the chances of hiring highly qualified safety professionals who are vital to the success of OSH management systems in organizations. Secondly, the relationship between the presence of qualified safety professionals and the safety culture (and performance) in an organization is reciprocal. Thirdly, the low quality of job descriptions limits exploring the proper competencies needed by safety professionals before they are hired. The safety professional is thus uncertain of what level of education or training and which skills they should attain. Objectives: The main goal of the study is to integrate the analytic hierarchy process (AHP) and the Technique for Order of Preference by Similarity to Ideal Solution (TOPSIS) with importance–performance analysis (IPA) to evaluate job descriptions in multiple sectors. Results: The results of the study indicate that it is vital to clearly define job levels, the overall mission, key responsibilities, time-consuming tasks, required education/certifications, and necessary personal abilities in safety job descriptions. This clarity enhances recruitment, fairness, performance management, and succession planning. The organization can then attract and retain top talent, improve performance, foster a strong safety culture, create realistic job expectations, increase employee satisfaction and productivity, and ensure that competent individuals are hired, ultimately leading to a safer and more productive workplace. Conclusion: The outcomes of this study provide a robust framework that can and should be used as a guideline to professionalize job description development and enhance talent acquisition strategies. Full article

Introduction: Burnout syndrome, long described as an “occupational phenomenon”, now affects 15–20% of the general workforce and more than 50% of clinicians, teachers, social-care staff and first responders. Its precise nosological standing remains disputed. We conducted a mechanistic review of electroencephalography (EEG) studies to determine whether burnout is accompanied by reproducible brain-function alterations that justify disease-level classification. Methods: Following PRISMA-adapted guidelines, two independent reviewers searched PubMed/MEDLINE, Scopus, Google Scholar, Cochrane Library and reference lists (January 1980–May 2025) using combinations of “burnout,” “EEG”, “electroencephalography” and “event-related potential.” Only English-language clinical investigations were eligible. Eighteen studies (n = 2194 participants) met the inclusion criteria. Data were synthesised across three domains: resting-state spectra/connectivity, event-related potentials (ERPs) and longitudinal change. Results: Resting EEG consistently showed (i) a 0.4–0.6 Hz slowing of individual-alpha frequency, (ii) 20–35% global alpha-power reduction and (iii) fragmentation of high-alpha (11–13 Hz) fronto-parietal coherence, with stage- and sex-dependent modulation. ERP paradigms revealed a distinctive “alarm-heavy/evaluation-poor” profile; enlarged N2 and ERN components signalled hyper-reactive conflict and error detection, whereas P3b, Pe, reward-P3 and late CNV amplitudes were attenuated by 25–50%, indicating depleted evaluative and preparatory resources. Feedback processing showed intact or heightened FRN but blunted FRP, and affective tasks demonstrated threat-biassed P3a latency shifts alongside dampened VPP/EPN to positive cues. These alterations persisted in longitudinal cohorts yet normalised after recovery, supporting trait-plus-state dynamics. The electrophysiological fingerprint differed from major depression (no frontal-alpha asymmetry, opposite connectivity pattern). Conclusions: Across paradigms, burnout exhibits a coherent neurophysiological signature comparable in magnitude to established psychiatric disorders, refuting its current classification as a non-disease. Objective EEG markers can complement symptom scales for earlier diagnosis, treatment monitoring and public-health surveillance. Recognising burnout as a clinical disorder—and funding prevention and care accordingly—is medically justified and economically imperative. Full article

Background/Objectives: This scoping review critically evaluated existing literature and summarized the impact of occupational, physiological, and psychological stressors on adrenal and neuroendocrine responses, body composition, and physical performance amongst women in tactical occupations. Methods: Boolean searches identified potentially qualifying reports involving: (1) adult women (≥19 y) currently employed or completing their training for a tactical profession; (2) ≥1 marker of “stress”; and (3) ≥1 adrenal, neuroendocrine, body composition, or fitness/performance outcome. Quantitative data (e.g., sample characteristics, outcomes of interest) were extracted and summarized. The completeness of reporting for each study was documented using existing checklists and quantified as: low (<50%), moderate (50–79%), or high (≥80%). Results: 40 studies (k) of moderate reporting quality (~64%) were included in the final sample (3693 women); 11 studies (28%) focused on women exclusively, and 16 studies identified sex differences in ≥1 outcome. Most studies involved military trainee populations (80%, k = 32). Occupation-related stress tended to negatively impact adrenal, neuroendocrine, body composition, and performance outcomes. Conclusions: This review highlights progress in assessing occupational performance in female tactical personnel exposed to diverse stressors; however, our understanding remains incomplete due to methodological and conceptual limitations in the literature. Holistic research strategies are needed to capture the complexity of performance readiness in women, integrating how stress affects key tactical performance aspects such as muscle physiology, reproductive health, and energy and nutrient balance in realistic operational contexts. Integrating such data is vital for informing policy, improving readiness, and enhancing the health and career longevity of female tactical personnel. Full article

Falls are a major safety concern in physically demanding occupations such as roofing, where workers operate on inclined surfaces under unstable postures. While inertial measurement units (IMUs) are widely used in wearable fall detection systems, they often fail to capture early indicators of instability related to foot–ground interactions. This study evaluates the effectiveness of plantar pressure sensors, alone and combined with IMUs, for fall detection on sloped surfaces. We collected data in a controlled laboratory environment using a custom-built roof mockup with incline angles of 0°, 15°, and 30°. Participants performed roofing-relevant activities, including standing, walking, stooping, kneeling, and simulated fall events. Statistical features were extracted from synchronized IMU and plantar pressure data, and multiple machine learning models were trained and evaluated, including traditional classifiers and deep learning architectures, such as MLP and CNN. Our results show that integrating plantar pressure sensors significantly improves fall detection. A CNN using just three IMUs and two plantar pressure sensors achieved the highest F1 score of 0.88, outperforming the full 17-sensor IMU setup. These findings support the use of multimodal sensor fusion for developing efficient and accurate wearable systems for fall detection and physical health monitoring. Full article

Work-related musculoskeletal disorders (WMSDs) are among the most prevalent occupational health issues, particularly affecting public transport drivers due to prolonged sitting, constrained postures, and poorly adaptable cabins. This study addresses the ergonomic risks associated with tram driving, aiming to evaluate biomechanical load and postural stress in relation to drivers’ anthropometric characteristics. A combined methodological approach was applied, integrating two standardized observational tools—RULA and REBA—with anthropometric modeling based on three representatives European morphotypes (SmallW, MidM, and TallM). ErgoFellow 3.0 software was used for digital posture evaluation, and lumbar moments at the L4/L5 vertebral level were calculated to estimate lumbar loading. The analysis was simulation-based, using digital human models, and no real subjects were involved. The results revealed uniform REBA (Rapid Entire Body Assessment) and RULA (Rapid Upper Limb Assessment) scores of 6 across all morphotypes, indicating moderate to high risk and a need for ergonomic intervention. Lumbar moments ranged from 51.35 Nm (SmallW) to 101.67 Nm (TallM), with the tallest model slightly exceeding the recommended ergonomic thresholds. These findings highlight a systemic mismatch between cabin design and user variability. In conclusion, ergonomic improvements such as adjustable seating, better control layout, and driver education are essential to reduce the risk of WMSDs. The study proposes a replicable methodology combining anthropometric, observational, and biomechanical tools for evaluating and improving transport workstation design. Full article

The growing number of daylighting metrics—often overlapping in scope or terminology—combined with the need for prior familiarization to interpret and apply them effectively, has created a barrier to their adoption beyond academic settings. Consequently, this study analyzes a representative set of established and emerging daylighting metrics to evaluate applicability, synergies, and limitations. Particular attention is given to their implications for occupant health, well-being, performance, and energy use, especially within the context of sensorless smart control systems. A virtual room model was simulated using DaySim 3.1 in two contrasting climates—Seville and London—with varying window-to-wall ratios, orientations, and occupancy schedules. The results show that no single metric provides a comprehensive daylighting assessment, highlighting the need for combined approaches. Daylighting Autonomy (DA) proved useful for task illumination, while Useful Daylight Illuminance (UDI) helped identify areas prone to excessive solar exposure. Spatial metrics such as Spatial Daylight Autonomy (sDA) and Annual Sunlight Exposure (ASE) offer an overview but lack necessary granularity. Circadian Stimulus Autonomy (CSA) appears promising for evaluating circadian entrainment, though its underlying models remain under refinement. Continuous Overcast Daylight Autonomy (DAo.con) shows the potential for sensorless lighting control when adjusted for orientation. A nuanced, multi-metric approach is therefore recommended. Full article

Background/Objectives: Oral health has specific importance and consequences from a military and Navy standpoint. The aim of this study was to determine and compare caries prevalence and dental care in Spanish Navy personnel. Methods: A retrospective observational study was carried out with a sample size of 1318 individuals (34.65 ± 8.82 years old) stationed at the Rota naval base in Spain, whose dental charts were examined. Caries prevalence was assessed using the Decayed, Missing, Filled Teeth (DMFT) index; dental care was evaluated using the care index (CI); and demographic and occupational factors were recorded. Results: The population of this study had a mean DMFT index of 5.99 ± 4.71 and a CI of 79%. Through the results of the DMFT index and CI, the statistical significance of the age and rank variables (p < 0.01) was confirmed, with personnel >45 years old and non-commissioned officers (NCOs) having the highest mean DMFT values and the youngest and officer groups having the greatest CI variable. Comparing the DMFT index across genders and ages and between age and rank also revealed significant differences. Conclusions: This study’s findings show a low prevalence of cavitated caries (14.5%), with intermediate DMFT values and higher CIs compared to those in previous published data. Full article

Pesticide exposure gradients between occupational, para-occupational, and general populations remain poorly characterized in North African agricultural contexts. This study evaluates urinary pesticide levels among farmers, indirectly exposed individuals, and a control group in Morocco’s Fez-Meknes region. A cross-sectional survey measured pesticide concentrations using LC-MS/MS in urine samples collected from 154 adults residing in both rural and urban areas. A questionnaire was used to gather information from participants regarding factors that may elevate the risk of pesticide exposure. The results revealed that farmers exhibited the highest concentrations of pesticides in their urine, including compounds classified as Ia/Ib by the World Health Organization. Indirectly exposed individuals showed moderate levels of contamination, with notable detections such as dichlofluanid (22.13 µg/L), while the control group had residual traces of neonicotinoids, notably imidacloprid (2.05 µg/L). Multivariate analyses revealed several sociodemographic factors significantly associated with increased pesticide exposure. The main risk factors identified included low education, residence in an agricultural area, and the consumption of untreated water (wells/rivers). Conversely, wearing personal protective equipment was associated with reduced urinary concentrations. This study highlights intense occupational exposure among farmers, secondary environmental contamination among residents living near treated areas, and the widespread dispersion of pesticide residues into urban areas. Full article

Background: Metabolic syndrome (MS) is a major public health concern linked to an elevated risk of type 2 diabetes and cardiovascular disease. Simple, reliable screening tools are needed for early identification, especially in working populations. Objective: To compare the diagnostic accuracy of body mass index (BMI), waist-to-height ratio (WtHR), triglyceride–glucose index (TyG), and waist–triglyceride index (WTI) for detecting MS based on NCEP ATP III and IDF criteria in a large cohort of Spanish workers. Methods: This cross-sectional study analyzed data from 386,924 Spanish workers. MS was diagnosed using NCEP ATP III and IDF definitions. The four indexes were evaluated by sex using a receiver operating characteristic (ROC) curve analysis. Area under the curve (AUC), optimal cut-off points, and Youden’s index were calculated. Results: TyG and WTI had the highest AUC values in men (0.911 and 0.901, respectively) for NCEP ATP III-defined MS, while WtHR and WTI achieved the best performance in women (0.955 and 0.953, respectively). WtHR outperformed BMI in all subgroups. Optimal cut-off values were identified according to sex and the definition of MS: TyG (8.95 men, 8.51 women), WtHR (0.54 men, 0.51 women), and WTI (170.6 men, 96.5 women), supporting their practical implementation in occupational health programs. All indexes showed significant discriminatory capacity (p < 0.001). Conclusions: TyG, WtHR, and WTI are more effective than BMI in detecting MS among Spanish workers, with sex-specific patterns. Their ease of use and diagnostic strength support their adoption in occupational health programs for early cardiometabolic risk detection. Full article

Aerosol uniformity in the mixing chamber is one of the key factors in evaluating performance of aerosol samplers and accuracy of aerosol monitors which could output the direct reading of particle size or concentration. For obtaining high uniformity and a stable test aerosol sample during evaluation, a portable mixing chamber, where the sample and clean air were dual-vortex turbulent mixed, was designed. By using computational fluid dynamics (CFD), particle motion within the mixing chamber was illustrated or explained. By adjusting critical structure parameters of chamber such as height and diameter, the flow field structure was optimized to improve particle mixing characteristics. Accordingly, a novel portable aerosol mixing chamber with length and inner diameter of 0.7 m and 60 mm was developed. Through a combination of simulations and experiments, the operating conditions, including working flow rate, ratio of carrier/dilution clean air, and mixture duration, were studied. Finally, by using the optimized parameters, a mixing chamber with high spatial uniformity where variation is less than 4% was obtained for aerosol particles ranging from 0.3 μm to 10 μm. Based on this chamber, a standardized testing platform was established to verify the sampling efficiency of aerosol samplers with high flow rate (28.3 L·min⁻¹). The obtained results were consistent with the reference values in the sampler’s manual, confirming the reliability of the evaluation system. The testing platform developed in this study can provide test aerosol particles ranging from sub-micrometers to micrometers and has significant engineering applications, such as atmospheric pollution monitoring and occupational health assessment. Full article