Search Results (163)

The presence of mycotoxins in food poses a significant risk to food safety, and it is essential to develop effective and safe detoxification strategies. In this study, we demonstrate the strong ability of Pichia fermentans KCB21_L2, a yeast isolated from kefir, to eliminate aflatoxin B₁, fumonisin B₁ and ocratoxin A. Viable cells removed aflatoxin B₁ and fumonisin B₁ more efficiently than heat-inactivated cells, particularly at pH values of 5.5 and 7.0, suggesting the involvement of an active removal process. Subsequently, we evaluated the capacity of P. fermentans KCB21_L2 to remove mycotoxins at high concentrations and investigated the underlying molecular and cellular responses. The yeast effectively eliminated high levels of all three mycotoxins. Transcriptional analysis revealed the activation of metabolic pathways related to amino acid catabolism and fatty acid metabolism, likely reflecting an adaptive stress response. However, no significant upregulation of specific genes related to mycotoxin-degrading enzymes was observed. In conclusion, the reduction process may involve multiple factors, including stress response pathways, possible production of organic acids, adsorption of mycotoxins into the cell wall, and constitutively expressed enzymes capable of degrading mycotoxins. In general, these findings highlight the multifactorial nature of yeast-mediated mycotoxin removal and establish P. fermentans KCB21_L2 as a promising candidate for safe biological decontamination in food systems. Full article

Quartz and feldspar have similar physical, chemical, and surface properties. Effectively separating them in near-neutral systems has long been a challenging research focus. This study introduces 1-Dodecyl-3-methylimidazolium bromide (DMB), an ionic liquid, as a collector in a quartz–feldspar flotation separation system to investigate its effects on the flotation behavior of quartz and feldspar. The interaction between the collector and the minerals is explained through zeta potential measurements, infrared spectroscopy analysis, and DFT calculations. The flotation test results indicate that DMB exhibits selective flotation separation properties enabling the separation of quartz from feldspar. Across the pH range of 3 to 11, DMB demonstrates high collection capability for quartz, but lower capability for feldspar. In particular, at pH levels of 7 to 8, the recovery difference between the two minerals exceeds 80%, achieving optimal selective separation. Mechanistic studies indicate that DMB primarily adsorbs on quartz and feldspar through electrostatic adsorption. The adsorption energy between DMB and quartz reaches −340.59 kJ/mol, forming a stable adsorption layer on the quartz surface. However, electrostatic repulsion arises over a broad area due to the large volume and cationic nature of DMB’s polar group and the exposed cationic Al sites on the feldspar surface, thereby hindering the interaction between DMB and feldspar. This research establishes the foundation for achieving efficient selective flotation separation of quartz and feldspar in a neutral system. Full article

Active surface materials such as activated carbon are used in the removal of contaminants and dyes in effluents. The primary objective of this study was to convert starchy corncobs into valuable activated carbon, capable of efficiently adsorbing dyes, and to comprehensively analyze the resulting material’s physical and structural properties. To achieve this purpose, a 2³ factorial design was employed to create optimized activated carbon for effective methylene blue dye adsorption. The factors considered were carbonization temperatures, carbonization times, and H₃PO₄ activating agent concentrations. This design yielded eight types of activated carbon, namely B-85%, D-85%, M-85%, L-85%, A-45%, S-45%, P-45% and X-45%, observing that the increase in temperature and carbonization time had negative effects on the adsorption capacity, while the increase in the percentage of activating agent had positive effects. The variant labeled as A-45% displayed the highest cationic methylene blue dye removal efficiency, boasting a remarkable adsorption capacity of 99.93%. This result almost reached the performance of commercial activated carbon, which exhibited a similar methylene blue dye removal efficiency (99.94%), while the removal efficiency of the anionic dye nigrosin was 95.24%. X-ray diffraction analysis of activated carbon A-45% indicated a slightly crystalline amorphous structure. Moreover, surface area analysis utilizing the BET method revealed that this material possessed a micromesoporous nature, mainly consisting of cylindrical micropores, resulting in an impressive surface area of 306,493 m²/g. FTIR analysis revealed the presence of functional groups, including O-H, C=C, C-O, C-X, and P=O, which create a highly polar surface that enhances the chemisorption of cationic molecules like methylene blue. These findings demonstrate the potential application of the synthesized activated carbon in industrial effluent treatment processes. Full article

Landslides are a major natural hazard capable of causing severe damage to infrastructure, ecosystems, and human life. They result from complex interactions of geological, hydrological, and environmental factors, with soil properties playing a crucial role by influencing the mechanical behavior and moisture dynamics of slope materials that drive initiation and progression. In South Africa, few studies have examined soil influences on landslide susceptibility, and none have been conducted in the Eastern Cape Province. This study investigated the role of soil physical and chemical properties in landslide susceptibility by comparing profiles from landslide scars and stable sites in the Port St. Johns and Lusikisiki region. Samples from topsoil and subsoil horizons were analyzed for soil organic matter (SOM), cation exchange capacity (CEC), saturated hydraulic conductivity (Ksat), exchangeable sodium adsorption ratio (SARexc), and texture. Statistical analyses included the Shapiro–Wilk test to evaluate data normality. For inter-profile comparisons, Welch’s t-test was applied to normally distributed data, while the Mann–Whitney U test was used for non-normal distributions. Intra-profile differences across more than two groups were assessed using the Kruskal–Wallis test for the non-normally distributed data. Results showed that landslide-prone soils had higher SOM, CEC, and Ksat in topsoil, promoting moisture retention and rapid infiltration, which favor pore pressure build-up and slope failure. Non-landslide soils displayed higher sodium-related indices and finer textures, suggesting more uniform water retention and resilience. Vertical variation in landslide soils indicated hydraulic discontinuities, fostering perched saturation zones. Findings highlight landslide initiation as a product of interactions between hydromechanical gradients and chemical dynamics. Full article

Water pollution, a significant environmental issue, is growing more urgent. This study evaluated the effectiveness of adsorption and electrocoagulation methods in removing Ba-sic Blue 3 (BB3), a common dye used in the textile industry, from water. For the adsorption process, linden tree leaves—often used for health benefits in existing literature—were employed, while in the electrocoagulation (EC) method, an aluminum electrode was used. The results show that the optimal conditions for adsorption were an initial BB3 concentration of 5 mg/L, 50 mL of 0.9 g Tilia L. adsorbent, 60 min, 180 rpm, 30 °C, and pH 10, achieving a removal efficiency of 99.21%. The optimal conditions for electrocoagulation were 1 L of 15 mg/L initial BB3, a current density of 2.64 mA/cm², 15 mL of 0.2 M KCl, a reaction time of 90 min, a stirring speed of 100 rpm, and a pH of 10, resulting in a removal efficiency of 97.98%. The results indicate that linden leaves, a natural and sustainable material, showed a slightly higher removal percentage (99.21%) in the EC method over a shorter period (60 min). Conversely, the EC method also achieved a significant removal rate (97.98%, 90 min). In summary, both methods demonstrate strong BB3 removal capabilities and could help improve wastewater treatment processes. Full article

Water treatment systems in swimming ponds support the natural self-cleaning capabilities of water based on the functions of repository macrophytes in their regeneration zone and the regulation of the internal metabolism of the reservoirs. As part of the project, a functional modular filtration chamber with system multiplication capabilities was designed and created. This element is dedicated to water treatment systems in natural swimming ponds. The prototype system consisted of modular filtration chambers and pump sections, as well as equipment adapted to the conditions prevailing in the eco-pool. An innovative solution for selective shutdown of the filtration chamber without closing the circulation circuit was also used, which forms the basis of a patent application. A verified high-performance adsorbent, Rockfos^® modified limestone, was used in the filtration chamber. In order to determine the effective filtration rate for three small test ponds with different flow rates (5 m/h, 10 m/h and 15 m/h), the selected physicochemical parameters of water (temperature, pH, electrolytical conductivity, oxygen saturation, total hardness, nitrites, nitrates, and total phosphorus, including adsorption efficiency and bed absorption capacity) were researched before and after filtration. Tests were also carried out on the composition of fecal bacteria and phyto- and zooplankton. Based on high effective phosphorus filtration efficiency of 32.65% during the operation of the bed, the following were determined: no exceedances of the standards for the tested parameters in relation to the German standards for eco-pools (FLL—Forschungsgesellschaft Landschaftsentwicklung Landschaftsbau e. V., 2011); lower number of fecal pathogens (on average 393—coliform bacteria; 74—Escherichia coli; 34—fecal enterococci, most probably number/100 mL); the lowest share of problematic cyanobacteria in phytoplankton (<250,000 individuals/dm³ in number and <0.05 µg/dm³—biomass); low chlorophyll a content (2.2 µg/dm³—oligotrophy) and the presence of more favorable smaller forms of zooplankton, an effective filtration speed of 5 m/h. This velocity was recommended in the FLL standards for swimming ponds, which were adopted in this study as a reference for rapid filters. In testing the functional efficiency of a dedicated filtration system for a Type II test pond (50 m²—area and 33 m³—capacity), at a filtration rate of 5 m/h, an average effective phosphorus adsorption efficiency of 18.28–53.98% was observed under the bed work-in-progress conditions. Analyses of other physicochemical water parameters, with appropriate calculations and statistical tests, indicated progressive functional efficiency of the system under bathing conditions. Full article

The discharge of synthetic dyes into aquatic ecosystems stands as a pointed environmental concern, with serious consequences affecting not only biodiversity and water quality but also human health. To address this challenge, this study introduces a natural Tunisian chert, a silica-rich sedimentary rock, as a promising, sustainable, and low-cost adsorbent for treating textile dye-polluted wastewater. For the first time, the adsorption capabilities of a Tunisian chert were systematically evaluated for both cationic (Methylene Blue; MB and Cationic Yellow 28; CY28) and anionic dyes (Eriochrome Black T; EBT). To assess the impacts of key operational parameters, such as pH (2–12), contact time (0–240 min), adsorbent dosage (0.02–0.25 g), and initial dye concentration (50–500 mg/L), batch mode adsorption trials were performed. The Langmuir isotherm model most accurately fits the adsorption data, yielding a maximum adsorption capacity of 138.88 mg/g for MB, 69.93 mg/g for CY28, and 119.04 mg/g for EBT, outperforming multiple conventional adsorbents. Kinetic modeling revealed that adsorption adhered to a pseudo-second-order model, with rapid equilibrium within 45–60 min, highlighting the efficiency of the Tunisian chert. Optimal dye removal was obtained at pH = 8 for cationic dyes and pH = 4 for EBT, driven by electrostatic interactions and surface charge dynamics. The current research work reveals that Tunisian chert is a low-cost and efficient adsorbent with a high potential serving for large-scale industrial applications in wastewater treatment. Using a locally abundant natural resource, this work provides a maintainable and economical approach for dye removal from polluted wastewater. Full article

In this study, polysaccharide xanthan gum (XG), used in the oil and gas industry as a thickening agent, was evaluated as an active anti-corrosion component against sweet corrosion at high temperatures and pressures in a saline environment for N80 carbon steel in the oil and gas industry. The evaluation involved measuring weight loss and conducting electrochemical assessments at 5 bar CO₂ partial pressure, different temperatures (e.g., 30 °C and 90 °C), and immersion times (up to 72 h). The electrochemical results indicated that XG effectively mitigated CO₂ corrosion at both low and high temperatures, demonstrating inhibition efficiencies of 70.10% at 30 °C and 61.41% at 90 °C using 1.0 g L⁻¹ of XG, after 24 h. The good inhibition efficiency observed even at high temperatures is likely due to the denaturation process that XG undergoes at high temperatures, where a rigid double-stranded helical structure transitions into two single-stranded, more flexible, worm-like macromolecular conformations. This increases the number and mobility of XG macromolecules available for adsorption on the metal surface. EIS measurements have shown that XG was capable of protecting the metal surface even after prolonged exposure. Potentiodynamic measurements indicated that the inhibitive action of XG is of a mixed type. The Temkin adsorption isotherm model provided a good fit for the observed data, and the calculated parameters suggested that the adsorption of XG primarily occurred through physical adsorption processes, with a contribution from chemical processes. The associated activation energy and the heat of adsorption further supported the physical nature of XG’s adsorption. FTIR analysis was employed to elucidate the interaction between the XG and the N80 carbon steel surface, while SEM-EDS analysis provided visual confirmation of the XG’s impact on the metal surface. Full article

Cu-BTC (HKUST-1) metal–organic framework (MOF) is widely recognized for its carbon capture capability due to its unsaturated copper sites, high surface area, and well-defined porous structure. This study developed mixed matrix membranes (MMMs) using cellulose triacetate (CTA), incorporating bimetallic Ni-Cu-BTC MOFs for CO₂/CH₄ separation, and benchmarked them against membranes fabricated with monometallic Cu-BTC. CTA was selected for its biodegradability, membrane-forming properties, and cost-effectiveness. The optimized membrane with 10 wt.% Ni-Cu-BTC achieved a CO₂ permeability of 22.9 Barrer at 25 °C and 5 bar—more than twice that of pristine CTA—with a CO₂/CH₄ selectivity of 33.8. This improvement stems from a 51.66% increase in fractional free volume, a 49.30% rise in the solubility coefficient, and a 51.94% boost in the diffusivity coefficient. Dual-sorption model analysis further confirmed enhanced solubility and adsorption mechanisms. These findings establish CTA/Ni-Cu-BTC membranes as promising candidates for high-performance CO₂ separation in natural gas purification and related industrial processes. Full article

Zeolites are widely used as adsorbents due to their porous structure and ion-exchange capabilities. However, their adsorption efficiency for heavy metal ions remains limited. To enhance their performance, the natural zeolite heulandite (Z) was functionalized with guanidine derivatives: N-[3-(triethoxysilyl)propyl]guanidine (1), -aminoguanidine (2), and -acetyl-guanidine (3). The resulting materials (Z1–Z3) were evaluated for their ability to adsorb Co²⁺, Cu²⁺, and Ni²⁺ from aqueous solutions. The composition and structure of silanes 1–3 were confirmed by FT-IR and ¹H and ¹³C NMR spectroscopy methods. The modified zeolites were characterized using nitrogen adsorption/desorption (BET) and SEM-EDX to confirm their functionalization and assess the structural changes. A TGA-DSC was used to determine the thermal stability. The adsorption experiments were conducted in single and multi-ionic aqueous solutions at pH 5.0 to evaluate metal uptake. Functionalization significantly improved the adsorption efficiency, with Z1–Z3 showing a three to six times greater adsorption capacity than the unmodified zeolite. The adsorption efficiency followed the trend Cu²⁺ > Co²⁺ > Ni²⁺, primarily due to chelate complex formation between the metal ions and guanidine groups. The SEM-EDX confirmed the co-localization of nitrogen atoms and metal ions. The functional materials (Z1–Z3) exhibited strong potential as adsorbents for noble, heavy, and toxic metal ions, and could find applications in industry, agriculture, ecology, medicine, chemistry, wastewater treatment, soil remediation, chemisorption, filtration, chromatography, etc. Full article

Nanomaterials possess unique physicochemical properties that position them as promising candidates for environmental remediation, particularly in the removal of persistent organic pollutants (POPs) from aqueous systems. Their high surface area, tunable functionality, and strong adsorption capabilities have attracted significant attention. In this context, this paper reviews the mechanisms of nanomaterial-based POP decontamination, also providing a critical overview of the limitations and challenges in applying these methods. Specifically, issues of stability, reusability, and aggregation are discussed, which can lead to performance decay during repeated use. In addition, the practical application requires nanocomposites to enable efficient separation and mitigate agglomeration. Environmental concerns also arise from nanomaterials’ fate, transport, and potential toxicity, which may impact aquatic ecosystems and non-target organisms. When checking for large-scale application feasibility, impurities typically add to production costs, recovery problems, and general infrastructure limitations. In addition to these points, there are no standard guidelines or clear risk assessment procedures for registering a product. Unprecedented cross-disciplinary research between natural, human, and technological studies and outreach programs is needed to facilitate the development and diffusion of the results. The barriers will eventually be breached to move from laboratory success in developing the desperately needed new water purification technologies to field-ready water treatment solutions that can address the global POP contamination problem. Full article

Penta-graphene, a novel two-dimensional carbon allotrope entirely composed of pentagonal carbon rings, has attracted increasing attention due to its unique geometric structure, mechanical robustness, and intrinsic semiconducting nature. In this study, we systematically investigate the adsorption behavior of three typical dissolved gases in transformer oil (CO, C₂H₂, and C₂H₄) on penta-graphene using first-principles calculations based on density functional theory. The optimized adsorption configuration, adsorption energy, charge transfer, adsorption distance, band structure, density of states, charge density difference, and desorption time are analyzed to evaluate the sensing capability of penta-graphene. Results reveal that penta-graphene exhibits moderate chemical interactions with CO and C₂H₂, accompanied by noticeable charge transfer and band structure changes, whereas C₂H₄ shows weaker physisorption characteristics. The projected density of states analysis further confirms the orbital hybridization between gas molecules and the substrate. Additionally, the desorption time calculations suggest that penta-graphene possesses good sensing and recovery potential, especially under elevated temperatures. These findings indicate that penta-graphene is a promising candidate for use in gas sensing applications related to the monitoring of dissolved gases in transformer oils. Full article

This research aims to synthesize a novel hydrogel bio-composite based on natural clay, sodium alginate (Na-AL), and iota-carrageenan as adsorbents to remove phosphate ions from aqueous solutions. The adsorbents were characterized by a variety of techniques, such as Fourier-transform infrared (FTIR) spectroscopy, scanning electron microscopy coupled with energy dispersive X-rays (SEM-EDX), and the determination of point zero charge (PZC). This research investigated how the adsorption process is influenced by parameters such as adsorbent dose, contact time, solution pH, and temperature. In this study, we used four isotherms and four kinetic models to investigate phosphate ion removal on the prepared bio-composite. The results showed that the second-order kinetic (PSO) model is the best model for describing the adsorption process. The findings demonstrate that the R² values are highly significant in both the Langmuir and Freundlich models (very close to 1). This suggests that Langmuir and Freundlich models, with a diversity of adsorption sites, promote the adsorption of phosphate ions. The maximum adsorbed amounts of phosphate ions by the bio-composite used were 140.84 mg/g for H₂PO₄⁻ ions and 105.26 mg/g for HPO₄²⁻ ions from the batch system. The positive ∆H° confirms the endothermic and physical nature of adsorption, in agreement with experimental results. Negative ∆G° values indicate spontaneity, while the positive ∆S° reflects increased disorder at the solid–liquid interface during phosphate uptake. The main parameters, including adsorbent dosage (mg), contact time (min), and initial concentration (mg/L), were tuned using the Box–Behnken design of the response surface methodology (BBD-RSM) to achieve the optimum conditions. The reliability of the constructed models is demonstrated by their high correlation coefficients (R²). An R² value of 0.9714 suggests that the model explains 97.14% of the variability in adsorption efficiency (%), which reflects its strong predictive capability and reliability. Finally, the adsorption behavior of phosphate ions on the prepared bio-composite beads was analyzed using an artificial neural network (ANN) to predict the process efficiency. The ANN model accurately predicted the adsorption of phosphate ions onto the bio-composite, with a strong correlation (R² = 0.974) between the predicted and experimental results. Full article

Arsenic contamination in water poses a significant global health risk, necessitating efficient and sustainable remediation strategies. Arsenic contamination affects groundwater in at least 106 countries, potentially exposing over 200 million people to elevated levels, primarily through contaminated drinking water. Among the most affected regions, Bangladesh remains a critical case study, where widespread reliance on shallow tubewells has resulted in one of the largest mass poisonings in history. Bio-based nanomaterials have emerged as promising solutions due to their eco-friendly nature, cost-effectiveness, and high adsorption capabilities. These nanomaterials offer a sustainable approach to arsenic remediation, utilizing materials like biochar, modified biopolymers, and bio-based aerogels, which can effectively adsorb arsenic and other pollutants. The use of environmentally friendly nanostructures provides a potential option for improving the efficiency and sustainability of arsenic remediation from groundwater. This review explores the mechanisms underlying arsenic remediation using such nanomaterials, including adsorption, filtration/membrane technology, photocatalysis, redox reactions, complexation, ion exchange, and coagulation–flocculation. Despite their potential, challenges such as scalability, stability, and regeneration hinder widespread application. We discuss recent advancements in material design, surface modifications, and hybrid systems that enhance performance. Finally, future perspectives are highlighted, including the integration of these bio-derived systems with smart sensing technologies, sustainable water-treatment frameworks, smart design, and life-cycle integration strategies, particularly for use in resource-constrained regions like Bangladesh and other globally impacted areas. Full article

Natural gas purification and the mitigation of carbon dioxide (CO₂) emissions from flue gases are critical steps in alleviating the greenhouse effect and significantly mitigate multiple environmental challenges associated with global warming. Hypercrosslinked polymers (HCPs) have become a hot topic as prospective adsorbents for gas purification and separation, owing to their low cost and scalability. Hence, TPB-Ben, TPB-Nap, and TPB-Ant were synthesized through a solvent knitting strategy, with the modification in the size of the monomers serving as a distinctive feature. This alteration aimed to explore the impact of phenyl ring quantity on the polymers’ gas adsorption and separation efficiency. All HCPs showed outstanding selective separation capability of CO₂ from CO₂/CH₄ and CO₂/N₂ mixtures, such as TPB-Ben-3-2 (CO₂/CH₄: 10.77; CO₂/N₂: 59.72), TPB-Nap-3-2 (CO₂/CH₄: 9.12; CO₂/N₂: 61.31), and TPB-Ant-3-2 (CO₂/CH₄: 10.00; CO₂/N₂: 62.89), which could be potential candidate adsorbents for natural gas purification and CO₂ capture. Considering the mild reaction conditions, low cost, efficient gas adsorption, and the potential for scalable production, these polymers are considered ideal selective solid adsorbents for capturing CO₂. This further highlights the significance of the solvent knitting strategy. Full article