Search Results (1,383)

The transition toward Industry 4.0 requires advanced sensing platforms capable of delivering real-time, high-fidelity data under extreme industrial conditions. Thin-film sensors, leveraging both photonic and functional approaches, are emerging as key enablers of this transformation. By exploiting optical phenomena such as Fabry–Pérot interference, guided-mode resonance, plasmonics, and photonic crystal effects, thin-film photonic devices provide highly sensitive, electromagnetic interference-immune, and remotely interrogated solutions for monitoring temperature, strain, and chemical environments. Complementarily, functional thin films including oxide-based chemiresistors, nanoparticle coatings, and flexible electronic skins extend sensing capabilities to diverse industrial contexts, from hazardous gas detection to structural health monitoring. This review surveys the fundamental optical principles, material platforms, and deposition strategies that underpin thin-film sensors, emphasizing advances in nanostructured oxides, 2D materials, hybrid perovskites, and additive manufacturing methods. Application-focused sections highlight their deployment in temperature and stress monitoring, chemical leakage detection, and industrial safety. Integration into Internet of Things (IoT) networks, cyber-physical systems, and photonic integrated circuits is examined, alongside challenges related to durability, reproducibility, and packaging. Future directions point to AI-driven signal processing, flexible and printable architectures, and autonomous self-calibration. Together, these developments position thin-film sensors as foundational technologies for intelligent, resilient, and adaptive manufacturing in Industry 4.0. Full article

Healthcare-associated infections (HCAIs) remain a significant global challenge, as pathogenic microorganisms can persist on hospital surfaces and medical equipment, contributing to severe infections and epidemic outbreaks. Conventional preventive measures, including disinfection procedures and personal protective equipment, are often insufficient to ensure complete microbial control, prompting interest in innovative antimicrobial surface technologies. This study reports the design, preparation, and comprehensive characterization of chitosan- and poly(ε-caprolactone)-based antibacterial coatings incorporating chlorhexidine-loaded zirconium phosphate (ZrPCHX) nanoparticles. Coatings were deposited by optimized spray and brush techniques to obtain uniform, adherent, and well-defined films. Their morphological, physicochemical, mechanical, and cytocompatibility properties were systematically evaluated, and antibacterial efficacy was assessed against clinically relevant pathogens following ISO 22196:2011 and additional protocols simulating realistic hospital conditions. Both coating systems demonstrated pronounced antibacterial activity, with the PCL-based formulation exhibiting a faster and broader bactericidal effect while maintaining good cytocompatibility. These findings support the potential of the developed nanostructured coatings as sustainable and scalable materials for the active decontamination of high-touch hospital surfaces, offering continuous antimicrobial protection and contributing to a reduction in HCAI incidence. Full article

This work presents results on laser-induced fabrication of metal and oxide structures on glass substrates. The Laser-Induced Reverse Transfer (LIRT) technique is applied using Zn and Sn, sintered ZnO and SnO₂, and oxide composite targets. The processing is performed by nanosecond pulses of a Nd:YAG laser system operated at wavelength of 1064 nm. Detailed analyses of the deposited material morphology, composition and structure are presented, as the role of the processing conditions is revealed. It is found that at the applied conditions of using up to five laser pulses, the deposited material is composed of a nanostructured film covered in microsized nanoparticle clusters or droplets. The use of metal targets leads to formation of structures composed of metal and oxide phases. The adhesion test shows that part of the deposited material is stably adhered to the substrate surface. It is demonstrated that the deposited materials can be used as resistive gas sensors with sensitivity to NH₃, CO, ethanol, acetone and N₂O, at concentrations of 30 ppm. The ability of the method to deposit composite structures that consist of a mixture of both investigated oxides is also demonstrated. Full article

This review summarizes the use of Auger Electron Spectroscopy (AES) for microchemical analysis of two different types of dielectric/(Al,Ga)N-based systems: (i) extrinsic dielectric PECVD SiO₂, ALD Al₂O₃, and ECR-CVD SiN_x films on Al_xGa_1−xN/GaN structures in the context of their application in microelectronic power devices and (ii) intrinsic Al₂O₃ films on AlN epitaxial layers grown by high-temperature oxidation for nanostructured technology of various gas/ion sensors. Particular attention is given to AES depth profiling across complete multilayer cross-sections, combining qualitative analysis of spectral line shape and intensity evolution as well as kinetic energy shifts with quantitative elemental depth distributions. This approach enables identification of chemical states and oxidation-related transformations at dielectric/semiconductor interfaces. Reported results demonstrate that AES provides micro- to nanometer-scale chemical information essential for distinguishing interfacial from the bulk properties. The capabilities and inherent limitations of AES depth profiling, including sputter-induced artifacts are also addressed, highlighting the role of optimized experimental conditions in reliable interface analysis. Full article

This review examines modern approaches to layer formation in solid oxide fuel cells (SOFCs), focusing on traditional, thin-film, and additive manufacturing methods. A systematic comparison of technologies, including slip casting, screen printing, CVD, PLD, ALD, HiPIMS, inkjet, aerosol, and microextrusion printing, is provided. It is shown that traditional methods remain technologically robust but are limited in their capabilities for miniaturization and interfacial architecture design. Modern thin-film and additive approaches provide high spatial accuracy, improved ion-electron characteristics, and flexibility in the design of multilayer structures; however, they require addressing issues related to scalability, ink stability, interfacial compatibility, and reproducibility. Particular attention is paid to interfacial engineering methods, such as functionally graded layers, nanostructured infiltration, and temperature-controlled 3D printing. Key challenges are discussed, including thermal instability of materials, the limited gas impermeability of ultra-thin electrolytes, and degradation during long-term operation. Development prospects lie in the integration of hybrid methods, the digitalization of deposition processes, and the implementation of intelligent control of printing parameters. The presented analysis forms the basis for further research into the scalable and highly efficient production of next-generation SOFCs designed for low-temperature operation and long-term operation in future energy systems. Full article

Magnetoliposomes are hybrid nanostructures that integrate superparamagnetic ultrasmall carbon-coated ferrite nanodots (MNCDs) within liposomes (Lipo) composed of egg yolk-derived phospholipids and stabilized with an environmentally benign potato peel extract (PPE), enabling enhanced magnetic resonance imaging (MRI) and optical imaging. The hydrothermally synthesized MNCDs were entrapped in liposomes prepared by thin-film hydration, and physicochemical properties were established at each stage of engineering. These magnetoresponsive vesicles (MNCDs+Lipo@PPE) serve as a triple-mode medical imaging contrast for T1 & T2-weighted MRI, while simultaneously enabling optical tracking of liposome degradation under an external magnetic field. They exhibited long-term enhanced fluorescence intensity and colloidal stability over 30 days, with hydrodynamic diameters ranging from 190 to 331 nm and an improved surface charge following PPE coating. In vitro cytotoxicity assays (MTT and Live/Dead staining) demonstrated over 87% cell viability for MNCDs+Lipo@PPE up to 2.7 mM concentration in A549 cells, indicating considerable toxicity. This multimodality engineering facilitates precise image-guided anticancer doxorubicin delivery and magnetic-responsive controlled release. The theoretical model shows that the release profile follows the Korsmeyer-Peppas profile. The externally applied magnetic field enhances the release by 1.4-fold. To demonstrate the anticancer efficiency in vitro with minimum off-target cytotoxicity, MTT and live/dead cell assay were performed against A549 cells. The reported study is a validated demonstration of magnetic-responsive nanocarrier systems for anticancer therapy and multimodal MRI and optical imaging-based diagnosis. Full article

Flexible microscale neural interfaces are advancing current strategies for recording and modulating electrical activity in the brain and spinal cord. The aim of this review is to colligate recent progress in thin-film micro-electrocorticography (μECoG) systems and establish a framework for their translation toward spinal bioelectronic implants. We first outline substrate and electrode material design, ranging from polymeric and hydrogel-based materials to nanostructured conductive materials that enable high-fidelity recording on mechanically compliant platforms. We then summarize structural design rules for μECoG arrays, including electrode size, pitch, and channel scaling, and relate these to data-driven μECoG applications in brain–computer interfaces and closed-loop neuromodulation. Bidirectional μECoG architectures for simultaneous stimulation and recording are examined, with emphasis on safe charge injection, electrochemical and thermal limits, and state-of-the-art hardware and algorithmic strategies for stimulation-artifact suppression. Building upon these cortical technologies, we briefly describe adaptation to spinal interfaces, where anatomical constraints demand optimized mechanical properties. Finally, we discuss the convergence of flexible bioelectronics, wireless power and telemetry, and embedded AI decoding as a path toward autonomous, clinically translatable μECoG and spinal neuroprosthetic systems. Ultimately, by synthesizing these multidisciplinary advances, this review provides a strategic roadmap for overcoming current translational barriers and realizing the full clinical potential of soft bioelectronics. Full article

We introduce an equal-phase method to design the polarization-insensitive metasurface lens, composed of subwavelength nano-holes etched into a silver film. By calculating the intensity distribution under linearly, circularly, and elliptically polarized light illumination, we demonstrate that the designed metasurface lens can effectively focus incident light with different polarization states. Moreover, we confirm that this polarization-insensitive property of the designed lens maintains stable focus ability across the entire visible light bandwidth, exhibiting a broadband performance. It is important to note that the metasurface lens design based on the equal-phase method is not limited by specific nanostructure units and exhibits considerable flexibility. For some complex application conditions, we also explore the design of polarization-insensitive lenses capable of generating longitudinal and transverse dual focal spots. The metasurface lenses and the design method proposed in this paper may provide a reference for the development and application of polarization-independent components in integrated photonic devices. Full article

The phase transitions and switching dynamics of topological polar textures in hafnium oxide (HfO₂)-based cylindrical-shell ferroelectrics are studied using a three-dimensional (3D) phase field model based on the self-consistent solution of the time-dependent Ginzburg–Landau model and Poisson equation. The comprehensive interplays of bulk free energy, gradient energy, depolarization energy, and elastic energy are taken into account. When a cylindrical ferroelectric device is biased under the in-plane radial electric field, there is a size-controlled phase transition between the ferroelectric (FE), antiferroelectric (AFE), and paraelectric (PE) phases, depending on ferroelectric film thickness and cylindrical shell radius. For in-plane polarization textures at the equilibriums, the FE phase has a Néel-like texture with a center-type four-quad domain, the AFE phase has a monodomain texture, and the PE phase has a Bloch-like texture with a vortex four-quad domain. These polarization domain textures are resultant from energy competition and topologically protected by the geometrical confinement. The polarization dynamics from polar states towards equilibriums are analyzed considering the separated contributions of x- and y-components of polarizations that are driven by x-y in-plane electric fields. The emergent topological domains and phase transitions provide guidelines for geometrical engineering of a novel nano-structured ferroelectric device that is different from the planar one, offering new possibilities for multi-functional high-density ferroelectric memory. Full article

Tungsten oxide (WO₃) nanostructures have emerged as promising electroactive materials due to their high pseudocapacitance, structural versatility, and chemical stability, while reduced graphene oxide (rGO) provides excellent electrical conductivity and surface area. The strategic combination of these nanomaterials in hybrid electrodes has gained attention for enhancing the energy storage performance of supercapacitors. In this work, we report the fabrication and electrochemical performance of nanostructured multilayer films based on the electrostatic Layer-by-Layer (LbL) self-assembly of poly (amidoamine) (PAMAM) dendrimers alternated with tungsten oxide (WO₃) nanofibers dispersed in reduced graphene oxide (rGO). The films were deposited onto indium tin oxide (ITO) substrates and subsequently subjected to electrochemical reduction. UV-Vis spectroscopy confirmed the linear growth of the multilayers, while atomic force microscopy (AFM) revealed homogeneous surface morphology and thickness control. Electrochemical characterization by cyclic voltammetry (CV) and galvanostatic charge–discharge (GCD) revealed a predominantly electrical double-layer capacitive (EDLC) behavior. From the GCD measurements (PAMAM/rGO-WO₃)₂₀ films achieved an areal capacitance of ≈2.20 mF·cm⁻², delivering an areal energy density of ≈0.17 µWh·cm⁻² and an areal power density of ≈2.10 µW·cm⁻², demonstrating efficient charge storage in an ultrathin electrode architecture. These results show that the synergistic integration of PAMAM dendrimers, reduced graphene oxide, and WO₃ nanofibers yields a promising strategy for designing high-performance electrode materials for next-generation supercapacitors. Full article

Surface-enhanced Raman scattering (SERS) is a highly sensitive analytical technique capable of single-molecule detection, yet its performance strongly depends on the underlying plasmonic architecture. In this study, we developed a robust SERS platform based on long-range–ordered bullseye plasmonic nano-gratings with tunable period and filling fraction, fabricated via electron beam lithography and reactive ion etching and uniformly coated with a thin gold film. These concentric nanostructures support efficient surface plasmon resonance and radial SPP focusing, enabling intense electromagnetic field enhancement across the substrate. Using this platform, we achieved quantitative detection of Rhodamine 6G with enhancement factors of ${10}^5$. Notably, our results reveal a previously unrecognized mechanistic insight: the geometric configuration producing the strongest local electric fields does not yield the highest SERS enhancement, due to misalignment between the dominant field orientation and the molecular polarizability tensor. This finding explains the non-monotonic dependence of SERS performance on grating geometry and introduces a new design principle in which both field strength and field–molecule alignment must be co-optimized. Overall, this work provides a mechanistic framework for rationally engineering plasmonic substrates for sensitive and quantitative molecular detection. Full article

Biomaterials are either cross-linked ionically, chemically, or physically, or they can be functionalized with amino acids to overcome inherent biocompatibility and stability limitations. Hydrogels for scaffold fabrication have been effectively utilized to promote tissue integration and cellular processes for soft tissue regeneration. Despite significant progress, poor remodeling limitations persist, hence the need for cross-linkers with dynamic adaptability, native tissue mimicry, and controllable degradation. The aim of this review is to highlight cysteine’s capability and potential to cross-link biomaterials using thiol chemistry while discussing the different cross-linking strategies to aid in the fabrication of robust hydrogel inks and bioinks. Furthermore, cysteine’s limitations and research scarcity in soft tissue scaffolds are highlighted for its chemical significance and potential role. The review examines cysteine’s thiol reactions, including disulfide bonds, thiol–ene, thiol–yne, and Michael additions, and cross-linking ability, with a specialized focus on adipose tissue regeneration. The fabrication methods reviewed include 3D bioprinting, electrospinning, films, and nanostructured scaffolds, with a primary focus on 3D bioprinting of hydrogel scaffolds. Cysteine cross-linking enhances the scaffolds’ stability, printability, biocompatibility, degradability, and biological performance of scaffolds with an 85% increase in Young’s modulus. Cysteine adequately enhances the mechanical properties and degradation rates of adipose tissue scaffolds. This review addresses the underexplored use of cysteine cross-linking in soft tissue scaffolds, beyond its common bone tissue applications. Full article

This Special Issue presents recent advances in the production, modelling, processing, and characterization of advanced industrial materials, highlighting the diversity and sophistication of contemporary research discussing metallic, polymeric, composite, and nano-structured systems. The collected contributions address key challenges in materials science, ranging from surface quality control, the development of novel machining and fabrication tools, and optimization of thermoplastic composite consolidation, to provide fundamental insights into additive manufacturing, rheology, and constitutive modelling. The showcased studies introduce innovative approaches to metrology, including advanced optical, fluorescence, and X-ray scattering techniques for characterizing nano-particles, microstructures, and thermal properties. The presented research also features investigations into the welding of dissimilar steels, binder jetting of stainless steel, and the influence of heat treatment on functional steel performance, alongside environmentally oriented research on natural-fibre energy devices and bio-based polymer composites. Further research topics include defect structures in doped crystals, low-temperature synthesis of oxide films, and mechanical behaviour of steels under extreme conditions. Collectively, these articles demonstrate the strong synergy between experimental methods, computational modelling, and industrial applications, underscoring the continued progress in materials reliability, surface engineering, and advanced manufacturing technologies. This Special Issue therefore provides a comprehensive overview of current trends and emerging directions, offering valuable methodological and conceptual insights in the field. Full article

The development of metal nanostructures on large-area Gallium Nitride (GaN) surfaces has the potential to enable new, low-cost technologies for III-N semiconductor layer nanostructuring. Self-assembled nanostructures are typically formed through the thermal activation of solid-state dewetting (SSD) in thin metal layers. However, such thermal processing can induce degradation of the metal-GaN material system. This comprehensive study investigated the thermal stability of thin metal films on GaN surfaces, focusing on their morphology and nanostructuring for high-temperature processing. The research expands and systematizes the understanding of the thin metal layers on GaN surface interactions at high temperatures by categorizing metals based on their behaviour: those that exhibit self-assembly, those that catalyze GaN decomposition, and those that remain thermally stable. Depending on the annealing temperature and metal type, varying degrees of GaN layer decomposition were observed, ranging from partial surface modification to significant volumetric degradation of the material. A wide range of metals was investigated: Au, Ag, Pt, Ni, Ru, Mo, Ti, Cr, V, Nb. These materials were selected based on criteria such as high work function and chemical resistance. In this studies metal layers with a target thickness of 10 nm deposited by vacuum evaporation on 2.2 $\mathsf{\mu }$m thick GaN layers grown by metal organic vapor phase epitaxy were applied. The surface morphology and composition were analyzed using AFM, SEM, EDS, and Raman spectroscopy measurement techniques. Full article