Search Results (29)

Ordered mesoporous carbons have emerged as versatile supports for Fischer–Tropsch catalysts due to their high surface area, tunable pore architectures, and chemical stability. However, the influence of active-metal identity on product selectivity within a common carbon framework remains insufficiently understood, particularly when Fe and Co are compared under rigorously identical conditions. To address this aspect, we prepared Fe- and Co-based catalysts with comparable nominal metal loadings supported on CMK-5 carbon material and evaluated their structural, surface, and catalytic properties. Comprehensive characterization revealed distinct metal-dependent behaviors, and catalytic testing between 423 and 598 K at 2 MPa showed that the catalyst CMK-5(Co10) exhibited substantially higher activity, whereas CMK-5(Fe10) provided a more stable product distribution and exclusively paraffinic C₂–C₃ products across the studied temperature range. In contrast, CMK-5(Co10) displayed a pronounced temperature-dependent selectivity, with increasing methane formation and the emergence of olefinic C₂–C₃ species at intermediate and high temperatures. Chain-growth probabilities were consistent with these trends. Complementary Density Functional Theory and Kinetic Monte Carlo analyses indicated stronger binding of carbonaceous intermediates on Fe clusters and more accessible C–C coupling pathways on Co clusters. Together, these results clarify how active-metal identity governs selectivity within a shared CMK-5 architecture and provide guidelines for designing carbon-supported Fischer–Tropsch catalysts with controlled product distributions. Full article

Pt-rare earth metal (Pt-RE) alloys are considered to be one of the most promising electrocatalysts for producing oxygen reduction reactions (ORRs) due to their compressively strained Pt overlayer and their exceptional negative-alloy formation energies, which result in excellent activity and stability. However, there are still great challenges in the chemical synthesis of Pt-RE nanoalloys. Herein, we report a simple method employing the nanopores of porous carbon as nanoreactors to synthesize a Pt₅La nanoalloy. The Pt₅La alloy nanoparticles are embedded in porous carbon (Pt₅La@C) with a particle size of around 1–3 nm and also exhibit a very narrow size distribution because of the confined-space effect. The as-prepared Pt₅La@C nanoalloy exhibits highly efficient ORR performance with a half-wave potential of 0.912 V in 0.1 M HClO₄, which is 56 mV higher than that of a commercial Pt/C catalyst. Moreover, it achieves an improved intrinsic activity of 0.69 mA cm⁻² and, a mass activity of 0.42 A mg_Pt⁻¹ at 0.90 V. In addition, it also delivers a very stable lifespan performance, with negligible decay in half-wave potential after accelerated stress testing for 10,000 cycles. This work also provides a new method for the development of promising Pt-RE nanoalloys with ultrasmall nanoparticles with a very narrow size distribution for various efficient energy-conversion devices. Full article

Electrocatalytic water splitting for hydrogen production is a crucial technology in achieving carbon neutrality. The development of efficient and stable hydrogen evolution reaction (HER) electrocatalysts is a core challenge in this field. This review systematically summarizes the latest research advancements in nanoporous transition metal-based catalysts, covering metal alloys and compounds. Through strategies such as compositional optimization, crystal structure modulation, interface engineering, and nanoporous structure design, these non-precious metal catalysts exhibit outstanding performance comparable to commercial platinum-carbon catalysts across a wide pH range. This paper thoroughly discusses the catalytic mechanisms of different material systems, including electronic structure regulation, active site exposure, and mass transport optimization. Finally, the challenges faced in current research are summarized, and future directions are projected, including scalable fabrication processes and performance validation in real electrolysis cell environments. This review provides significant insights into designing next-generation efficient and stable non-precious metal electrocatalysts. Full article

Methodological fusion of materials chemistry, which enables us to create materials, with nanotechnology, which enables us to control nanostructures, could enable us to create advanced functional materials with well controlled nanostructures. Positioned as a post-nanotechnology concept, nanoarchitectonics will enable this purpose. This review paper highlights the broad scope of applications of the new concept of nanoarchitectonics, selecting and discussing recent papers that contain the term ‘nanoarchitectonics’ in their titles. Topics include controls of dopant atoms in solid electrolytes, transforming the framework of carbon materials, single-atom catalysts, nanorobots and microrobots, functional nanoparticles, nanotubular materials, 2D-organic nanosheets and MXene nanosheets, nanosheet assemblies, nitrogen-doped carbon, nanoporous and mesoporous materials, nanozymes, polymeric materials, covalent organic frameworks, vesicle structures from synthetic polymers, chirality- and topology-controlled structures, chiral helices, Langmuir monolayers, LB films, LbL assembly, nanocellulose, DNA, peptides bacterial cell components, biomimetic nanoparticles, lipid membranes of protocells, organization of living cells, and the encapsulation of living cells with exogenous substances. Not limited to these examples selected in this review article, the concept of nanoarchitectonics is applicable to diverse materials systems. Nanoarchitectonics represents a conceptual framework for creating materials at all levels and can be likened to a method for everything in materials science. Developing technology that can universally create materials with unexpected functions could represent the final frontier of materials science. Nanoarchitectonics will play a significant part in achieving this final frontier in materials science. Full article

A major challenge for Li-O₂ batteries is the slow kinetics of oxygen reduction (ORR) and evolution (OER) reactions. This work presents a high-performance Pt₃Rh/C composite cathode where Pt-Rh nanoalloys are uniformly dispersed on 3D nanoporous carbon. The bimetallic architecture demonstrates significantly enhanced ORR/OER activity compared to conventional catalysts. Super P, with a large specific surface area and omnipresent pores with diverse size distribution, provided sufficient storage space for Li₂O₂ and facilitated transport channels for Li⁺ and O₂, while the highly conductive Pt₃Rh NPs optimized catalytic efficiency. XPS reveals a prominent electron transfer process between Pt and Rh; the Rh sites in Pt₃Rh/C alloy can effectively act as electron donors to improve the oxygen/lithium peroxide (O₂/Li₂O₂) redox chemistry in LOB. Therefore, the Pt₃Rh/C electrode shows the minimum overpotential (0.60 V) for efficient oxygen reduction and evolution under an upper-limit capacity of 2000 mAh g⁻¹. This work introduces a Pt₃Rh/C nanoalloy synthesis method that boosts Li-O₂ battery efficiency by accelerating oxygen reaction kinetics. Full article

The catalytic activity and selectivity of Co-based catalysts supported on home-made nanoporous carbon was studied as a function of the type of alkali promoter (Ca and Mg). The catalysts were characterized by N₂ adsorption/desorption isotherms, temperature-programmed reduction, CO chemisorption, and X-ray diffraction patterns. The catalysts were compared against carbon-supported alkali-promoted Ni-based catalysts and Re-containing catalysts. The catalytic activity of the Co-based catalyst was clearly enhanced in the presence of Ca and Mg, and it was higher than the Ni-based catalysts and comparable to that obtained using an ReC catalyst. The initial activity of the Mg-promoted catalyst increased by a factor of up to 2.5 times higher compared to the non-promoted catalyst. Moreover, this catalyst showed a turnover frequency of up to 5 times higher than equivalent carbon-supported Re-based catalysts. Significant changes were not observed in the selectivity of products after the incorporation of alkali, with cyclohexane being the main product. However, it was demonstrated that the presence of alkali led to a faster and higher production of cyclohexane from the demethoxylation of phenol and the dehydrogenation of cyclohexanol. The present results suggest that Co-based catalysts are an economical alternative for the catalytic conversion of representative target molecules from bio-oil feed. Full article

High-performance and cost-efficient electrocatalysts and electrodes are needed to improve the hydrogen evolution reaction (HER) for the hydrogen (H₂) generation in electrolysers, including microbial electrolysis cells (MECs). In this study, free-standing carbon nanofiber (CNF) films with supported cobalt phosphide nanoparticles have been prepared by means of an up-scalable electrospinning process followed by a thermal treatment under controlled conditions. The produced cobalt phosphide-supported CNF films show to be nanoporous (pore volume up to 0.33 cm³ g⁻¹) with a high surface area (up to 502 m² g⁻¹) and with a suitable catalyst mass loading (up to 0.49 mg cm⁻²). Values of overpotential less than 140 mV at 10 mA cm⁻² have been reached for the HER in alkaline media (1 M KOH), which demonstrates a high activity. The high electrical conductivity together with the mechanical stability of the free-standing CNF films allowed their direct use as cathodes in a MEC reactor, resulting in an exceptionally low voltage operation (0.75 V) with a current density demand of 5.4 A m⁻². This enabled the production of H₂ with an energy consumption below 30 kWh kg⁻¹ H₂, which is highly efficient. Full article

Porous polymeric frameworks have received great interest over the past few years because of their nonstop growth as crystalline porous polymeric materials connected through covalent bonds and versatile utilities in diverse fields. The production of high-value organic compounds via sustainable and environment-friendly methods is an uphill struggle for researchers. The elegant strategy of using carbon dioxide as a C1 building block is an intriguing platform owing to its non-toxicity, easy accessibility, natural abundance, recyclability, non-flammability, and cheapness. Additionally, CO₂ levels are regarded as the main contributor to the greenhouse effect (the most abundant greenhouse gas across the globe) and the aforementioned strategy needs to mitigate CO₂ emissions. This present study describes the synthesis of silver nanoparticles (AgNPs) embedded in a porous polymeric framework, a reusable heterogeneous catalyst (recyclable over 5 times), TpMA (MC)@Ag. The synthesized catalyst is characterized by using FT-IR, PXRD, XPS, FE-SEM, TEM, EDAX, TGA DTA, and N₂ sorption studies. Additionally, the catalysts can be easily recycled to generate the desired α-alkylidene cyclic carbonates and oxazolidinone compounds under solvent-free conditions. This research demonstrates the potential of nanoporous 2D porous polymeric framework-based materials in the area of catalysis, specially, in CO₂ capture and chemical fixation. These findings offer a promising approach for the chemical fixation of CO₂ into α-alkylidene cyclic carbonates and oxazolidinones from propargylic alcohols utilizing AgNPs embedded in a 2D catalyst, which functions as a potential heterogeneous catalyst under mild conditions (e.g., solvent-free approach). Full article

The oxygen evolution reaction (OER) is a key half-reaction in electrocatalytic water splitting. Large-scale water electrolysis is hampered by commercial noble-metal-based OER electrocatalysts owing to their high cost. To address these issues, we present a facile, one-pot, room-temperature co-precipitation approach to quickly synthesize carbon-nanotube-interconnected amorphous NiFe-layered double hydroxides (NiFe-LDH@CNT) as cost-effective, efficient, and stable OER electrocatalysts. The hybrid catalyst NiFe-LDH@CNT delivered outstanding OER activity with a low onset overpotential of 255 mV and a small Tafel slope of 51.36 mV dec⁻¹, as well as outstanding long-term stability. The high catalytic capability of NiFe-LDH@CNT is associated with the synergistic effects of its room-temperature synthesized amorphous structure, bi-metallic modulation, and conductive CNT skeleton. The room-temperature synthesis can not only offer economic feasibility, but can also allow amorphous NiFe-LDH to be obtained without crystalline boundaries, facilitating long-term stability during the OER process. The bi-metallic nature of NiFe-LDH guarantees a modified electronic structure, providing additional catalytic sites. Simultaneously, the highly conductive CNT network fosters a nanoporous structure, facilitating electron transfer and O₂ release and enriching catalytic sites. This study introduces an innovative approach to purposefully design nanoarchitecture and easily synthesize amorphous transition-metal-based OER catalysts, ensuring their cost effectiveness, production efficiency, and long-term stability. Full article

This paper proposes a different strategy for deriving carbon materials from biomass, abandoning traditional strong corrosive activators and using a top−down approach with a mild green enzyme targeted to degrade the pectin matrix in the inner layer of pomelo peel cotton wool, inducing a large number of nanopores on its surface. Meanwhile, the additional hydrophilic groups produced via an enzymatic treatment can be used to effectively anchor the metallic iron atoms and prepare porous carbon with uniformly dispersed Fe−N_x structures, in this case optimizing sample PPE−FeNPC−900’s specific surface area by up to 1435 m² g⁻¹. PPE−FeNPC−900 is used as the electrode material in a 6 M KOH electrolyte; it manifests a decent specific capacitance of 400 F g⁻¹. The assembled symmetrical supercapacitor exhibits a high energy density of 12.8 Wh kg⁻¹ at a 300 W kg⁻¹ power density and excellent cycle stability. As a catalyst, it also exhibits a half−wave potential of 0.850 V (vs. RHE) and a diffusion-limited current of 5.79 mA cm⁻² at 0.3 V (vs. RHE). It has a higher electron transfer number and a lower hydrogen peroxide yield compared to commercial Pt/C catalysts. The green, simple, and efficient strategy designed in this study converts abundant, low−cost waste biomass into high-value multifunctional carbon materials, which are critical for achieving multifunctional applications. Full article

Heteroatom-doped nanoporous carbon materials with unique hierarchical structures have been shown to be promising supports and catalysts for energy conversion; however, hard-template methods are limited by their inflexibility and time-consuming process. Soft-template methods have been suggested as an alternative, but they are limited by their picky requirements for stable reactions and the few known precursors for small-batch synthesis. In this study, a gram-scale soft-template-based silica-assisted method was investigated for producing nitrogen-doped hollow nanoporous carbon spheres (N-HNCS). Nitrogen doping is accomplished during preparation with enhanced electrocatalytic activity without complicating the methodology. To investigate the effect of the unique structural characteristics of N-HNCS (specific surface area: 1250 m² g⁻¹; pore volume: 1.2 cm³ g⁻¹), cobalt was introduced as an active center for the oxygen reduction reaction. Finely tuned reaction conditions resulted in well-dispersed cobalt particles with minimal agglomeration. This sheds light on the advancement of new experimental procedures for developing more active and promising non-noble catalysts in large and stable batches. Full article

Inorganic arsenic in drinking water from groundwater sources is one of the potential causes of arsenic-contaminated environments, and it is highly toxic to human health even at low concentrations. The purpose of this study was to develop a magnetic adsorbent capable of removing arsenic from water. Fe₃O₄-monolithic resorcinol-formaldehyde carbon xerogels are a type of porous material that forms when resorcinol and formaldehyde (RF) react to form a polymer network, which is then cross-linked with magnetite. Sonication-assisted direct and indirect methods were investigated for loading Fe₃O₄ and achieving optimal mixing and dispersion of Fe₃O₄ in the RF solution. Variations of the molar ratios of the catalyst (R/C = 50, 100, 150, and 200), water (R/W = 0.04 and 0.05), and Fe₃O₄ (M/R = 0.01, 0.03, 0.05, 0.1, 0.15, and 0.2), and thermal treatment were applied to evaluate their textural properties and adsorption capacities. Magnetic carbon xerogel monoliths (MXRF600) using indirect sonication were pyrolyzed at 600 °C for 6 h with a nitrogen gas flow in the tube furnace. Nanoporous carbon xerogels with a high surface area (292 m²/g) and magnetic properties were obtained. The maximum monolayer adsorption capacity of As(III) and As(V) was 694.3 µg/g and 1720.3 µg/g, respectively. The incorporation of magnetite in the xerogel structure was physical, without participation in the polycondensation reaction, as confirmed by XRD, FTIR, and SEM analysis. Therefore, Fe₃O₄-monolithic resorcinol-formaldehyde carbon xerogels were developed as a potential adsorbent for the effective removal of arsenic with low and high ranges of As(III) and As(V) concentrations from groundwater. Full article

The rapid development of electrochemical CO₂ reduction offers a promising route to convert intermittent renewable energy into products of high value-added fuels or chemical feedstocks. However, low faradaic efficiency, low current density, and a narrow potential range still limit the large-scale application of CO₂RR electrocatalysts. Herein, monolith 3D bi-continuous nanoporous bismuth (np-Bi) electrodes are fabricated via a simple one-step electrochemical dealloying strategy from Pb-Bi binary alloy. The unique bi-continuous porous structure ensures highly effective charge transfer; meanwhile, the controllable millimeter-sized geometric porous structure enables easy catalyst adjustment to expose highly suitable surface curvatures with abundant reactive sites. This results in a high selectivity of 92.6% and superior potential window (400 mV, selectivity > 88%) for the electrochemical reduction of carbon dioxide to formate. Our scalable strategy provides a feasible pathway for mass-producing high-performance and versatile CO₂ electrocatalysts. Full article

The electrocatalytic reduction of CO₂ to other high value-added chemicals under ambient conditions is a promising and ecofriendly strategy to achieve sustainable carbon recycling. However, the CO₂ reduction reaction (CO₂RR) is still confronted with a large number of challenges, such as high reaction overpotential and low product selectivity. Therefore, the rapid development of appropriate electrocatalysts is the key to promoting CO₂ electroreduction. Over the past few decades, Au-based nanocatalysts have been demonstrated to be promising for the selective CO₂RR to CO owing to their low reaction overpotential, good product selectivity, high Faraday efficiency and inhibition of the hydrogen evolution reaction. In this respect, this review first introduces the fundamentals of the electrochemical reduction of CO₂ and then focuses on recent accomplishments with respect to Au-based nanocatalysts for CO₂RR. The manipulation of various factors, e.g., the nanoporous structure, nanoparticle size, composition, morphology, support and ligand, allows for the identification of several clues for excellent Au-based nanocatalysts. We hope that this review will offer readers some important insights on Au-based catalyst design and provide new ideas for developing robust electrocatalysts. Full article

Designing and modifying nanoporous metal foils to make them suitable for supercapacitor and catalysis is significant but challenging. In this work, Cu_xO nanoflakes have been successfully in situ grown on nanoporous Cu foil via a facile electrooxidation method. A Ga-assisted surface Ga-Cu alloying–dealloying is adopted to realize the formation of a nanoporous Cu layer on the flexible Cu foil. The following electrooxidation, at a constant potential, modifies the nanoporous Cu layer with Cu_xO nanoflakes. The optimum Cu_xO/Cu electrode (O-Cu-2h) delivers the maximum areal capacitance of 0.745 F cm⁻² (410.27 F g⁻¹) at 0.2 mA cm⁻² and maintains 94.71% of the capacitance after 12,000 cycles. The supercapacitor consisted of the O-Cu-2h as the positive electrode and activated carbon as the negative electrode has an energy density of 24.20 Wh kg⁻¹ and power density of 0.65 kW kg⁻¹. The potential of using the electrode as oxygen evolution reaction catalysts is also investigated. The overpotential of O-Cu-2h at 10 mA cm⁻² is 394 mV; however, the long-term stability still needs further improvement. Full article