Search Results (93)

The issue of antibiotic resistance is becoming increasingly severe, urgently requiring the development of new antibacterial strategies. Photodynamic therapy (PDT) has gradually emerged as a promising alternative due to its spatiotemporal controllability, low risk of drug resistance, and broad-spectrum antibacterial properties. However, most existing photosensitizers (PSs) are hydrophobic, which limits their application efficiency in PDT. To address this problem, we designed and synthesized a water-soluble perylene diimide derivative (PDICN-CBn) as a photosensitizer. By introducing quaternary ammonium salt groups, its water solubility was improved, and antibacterial activity was enhanced. Subsequently, PDICN-CBn was assembled into silk fibroin/polylactic acid (SF/PLA) nanofibrous membranes via electrospinning technology, successfully constructing a visible-light-responsive ternary composite nanofibrous membrane (SF/PLA@PDICN-CBn). Using various characterization methods such as nuclear magnetic resonance (¹H-NMR), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and scanning electron microscopy (SEM), the microstructure, chemical composition, and structural characteristics of the nanofibrous membranes were systematically analyzed, verifying the successful synthesis of the photosensitizer and its assembly into the nanofibrous membranes. In the reactive oxygen species (ROS) experiment, electron spin resonance (ESR) spectra showed that PDICN-CBn efficiently generated singlet oxygen (¹O₂), superoxide anion (·O₂⁻), and hydroxyl radical (·OH) under visible light irradiation, confirming its ability to produce different types of ROS through both type I and type II photodynamic reactions. In the antibacterial experiments, Escherichia coli (E. coli), Staphylococcus aureus (S. aureus), and methicillin-resistant Staphylococcus aureus (MRSA) were selected for a series of tests, including plate-counting antibacterial assays, bacterial live/dead staining, and SEM observation of morphology. The results showed that 8 μg/mL of PDICN-CBn effectively destroyed the bacterial cell membrane structure and killed bacteria (bactericidal rate > 95%) after 2 h of visible light irradiation. This work successfully developed a novel visible-light-responsive SF/PLA@PDICN-CBn nanofibrous membrane with a dual antibacterial system combining photodynamic and electrostatic adsorption antibacterial properties, providing new ideas and methods for the design and development of photodynamic antibacterial materials. The prepared nanofibrous membrane has potential application values in fields such as wound dressings and medical protective materials and is expected to provide strong support for solving clinical infection problems. Full article

This study aimed to engineer nanofibrous scaffolds that prioritize architecture, rather than relying solely on the drug, to achieve reproducible, long-acting local therapies. Cotton-wool-like fiber, three-dimensional (3D) poly(L-lactic acid)/polyethene glycol (PLLA/PEG) blend scaffolds were fabricated using solution blow spinning (SBS) as a customizable encapsulation platform for controlled antibiotic release. Morphological and wettability analyses were performed by scanning electron microscopy (SEM) and pendant-drop contact angle measurements, respectively. Fiber diameters were quantified using ImageJ. The chemical composition and thermal behavior were investigated by Fourier-transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA). In vitro, assays were conducted to assess the antimicrobial activity of vancomycin-loaded scaffolds against Staphylococcus aureus (disk diffusion method), as well as their cytocompatibility (Live/Dead assay in Vero cells) and hemocompatibility (ASTM F756-17 hemolysis test). All biological data were statistically analyzed using ANOVA with Tukey’s post-test, Mann–Whitney, and paired t-tests, with significance set at p ≤ 0.05. Structural optimization identified PLLA/PEG 85:15 as the most stable composition, producing homogeneous mats with high porosity and rapid wettability. Incorporation of vancomycin (10 wt.%) reduced the fiber diameter (0.23 ± 0.11 µm) compared with unloaded scaffolds (0.32 ± 0.17 µm), indicating drug–polymer interactions that modulated jet elongation. FTIR, DSC, and TGA analyses confirmed polymer miscibility and stabilization of VMC within the fibrous matrix, with no signs of degradation. Drug release exhibited a biphasic profile, with an initial burst during the first 72 h. PLLA/PEG–VMC scaffolds produced larger inhibition zones against S. aureus (18.55 mm ± 1.2 to 6.63 mm ± 0.2 at 120 h) compared with free VMC (12.91 mm ± 3.8 to 4.07 mm ± 0.6291), while blank scaffolds were inactive. Hemolysis remained within the range 2% < PLLA/PEG–VMC < 5%, indicating acceptable hemocompatibility according to ASTM standards. Although VCM-loaded PLLA/PEG scaffolds slightly reduced Vero cell viability, no statistically significant differences were observed compared with the control group. These findings demonstrate that the architecture of nanofibers presents itself as a potential platform for antimicrobial therapy with topical vancomycin in potential applications such as wound dressings or implant coatings. Full article

Bacterial cellulose (BC) hydrogel is a promising skin wound healing biomaterial due to its unique properties, including a moist environment that facilitates tissue healing. To enhance its antimicrobial efficacy, BC dressings were loaded with penicillin and streptomycin. FT-IR analysis confirmed successful drug binding, while SEM revealed a nanofibrous and porous hydrogel structure. In vitro studies using 3T3 mouse fibroblasts demonstrated biocompatibility, and scratch wound assays achieved complete closure across all tested concentrations. Antibacterial activity, assessed via agar diffusion against Pseudomonas aeruginosa and Staphylococcus aureus, showed a concentration-dependent increase in inhibition zones, highlighting the potential of BC-Pen/Strep hydrogels as effective antimicrobial wound dressings. Full article

Biocompatible nanofibrous dressings integrating bioactive compounds with antioxidative and antimicrobial properties offer a promising solution for effective wound healing. In the presented study, we developed a novel dual-delivery system by combining forcespun nanofibres with poly(3-hydroxybutyrate) (PHB)-liposomes to enhance bioavailability and enable targeted release of bioactive agents (eugenol, thymol, curcumin, ampicillin, streptomycin, gentamicin). These agents exhibited notable antioxidant activity (2.27–2.33 mmol TE/g) and synergistic or partially synergistic antimicrobial effects against E. coli, M. luteus, S. epidermidis, and P. aeruginosa ( Fractional Inhibitory Concentration index 0.09–0.73). The most potent combinations, particularly thymol, eugenol, and ampicillin, were encapsulated in the nanofibre–liposomal matrix. The successful preparation of a new combined delivery system was confirmed by structural analysis using Electron and Fluorescence Microscopy. The dual-composite materials retained the antimicrobial properties of the individual compounds upon release, with the highest increases of ~73.56% against S. epidermidis. Cell viability and in vitro immunology assays using the human keratinocyte cell line (HaCaT) showed a slight decrease in viability and immune response stimulation, while not impairing wound re-epithelisation. These findings highlight the potential of firstly reported novel carrier utilising both PHB-nanofibres and PHB-liposomes, exhibiting simultaneous antioxidant and antimicrobial activity as promising candidates for the treatment of infected wounds under oxidative stress. Full article

The application of conductive polymers in wound dressings presents great potential for accelerated wound healing since their high electrical conductivity and biocompatibility facilitate the delivery of external electrical stimuli to cells and tissues, promoting cell differentiation and proliferation. Electrospinning is a very straightforward method for the preparation of polymeric wound dressings capable of mimicking the extracellular matrix of skin, promoting hemostasis, absorbing wound exudate, allowing atmospheric oxygen permeation and maintaining an appropriately moist environment. In this work, in situ chemically polymerized poly(3,4-ethylenedioxythiophene) (PEDOT) was achieved through hyaluronic acid-doping. The synthesized PEDOT was used for the production of conductive and biodegradable chitosan (CS)/gelatin (GEL)/PEDOT electrospun meshes. Additionally, the randomly aligned meshes were crosslinked with a 1,4-butanediol diglycidyl ether and their physicochemical and mechanical properties were investigated. The results show that the incorporation of a conductive polymer led to an increase in conductivity of the solution, density and fiber diameter that influenced porosity, water uptake, and dissolvability and biodegradability of the meshes, while maintaining appropriate water vapor permeation values. Due to their intrinsic similarity to the extracellular matrix and cell-binding sequences, CS/GEL/PEDOT electrospun nanofibrous meshes show potential as conductive nanofibrous structures for electrostimulated wound dressings in skin tissue engineering applications. Full article

Wound healing is a physiological process including haemostasis, inflammation, proliferation, and remodelling. Acute wounds typically follow a predictable healing process, whereas chronic wounds cause prolonged inflammation and infection, failing to progress through typical healing phases and presenting significant clinical challenges. A combination of wound care techniques and therapeutic agents is required to manage chronic wounds effectively. Curcumin is a bioactive compound derived from Curcuma longa and has gained attention for its potent antioxidant, anti-inflammatory, and antibacterial properties. The first part of this review aims to provide a comprehensive overview of the physiology of wound healing, focusing on the pathophysiology and management of acute and chronic wounds, followed by the biological activity of curcumin in wound healing, emphasising its impact on promoting tissue repair. Finally, this review explores curcumin-loaded dressings, such as hydrogels, nanofibrous membranes, polymeric micelles, and films, offering controlled drug release and targeted curcumin delivery to enhance wound healing. Full article

The effective healing of chronic wounds requires balancing antimicrobial activity with tissue regeneration. In this study, we developed a novel, eco-friendly synthesis method using Artemisia argyi extract to produce silver nanoparticles (AgNPs), addressing toxicity concerns associated with conventional chemical synthesis methods. Through optimization of multiple synthesis parameters, monodisperse spherical AgNPs with an average diameter of 6.76 ± 0.27 nm were successfully obtained. Plant-derived compounds from Artemisia argyi extract acted as efficient mediators for both reduction and stabilization, yielding nanoparticles with high crystallinity. The synthesized AgNPs exhibited potent antibacterial activity against both Gram-negative and Gram-positive bacteria, with minimum inhibitory concentrations of 8 μg/mL against Escherichia coli and 32 μg/mL against Staphylococcus aureus, while maintaining high biocompatibility with L929 fibroblasts at concentrations ≤ 8 μg/mL. When integrated into polylactic acid/collagen type I (PLA/Col1) nanofibrous matrices, the optimized 0.03% AgNPs/PLA/Col1 dressing significantly accelerated wound healing in a diabetic rat model, achieving 94.62 ± 2.64% wound closure by day 14 compared to 65.81 ± 1.80% observed in untreated controls. Histological analyses revealed a dual-functional mechanism wherein controlled silver ion release provided sustained antibacterial protection, while concurrently promoting tissue regeneration characterized by enhanced collagen deposition, reduced inflammation, and increased neovascularization. This innovative approach effectively addresses critical challenges in diabetic wound care by providing simultaneous antimicrobial and regenerative functions within a single biomaterial platform. Full article

Nanofibrous dressing materials with an antitumor function can potentially inhibit recurrence of melanoma following the surgical excision of skin tumors. In this study, hydrolyzed polyacrylonitrile (hPAN) nanofibers biofunctionalized with L-carnosine (CAR) and loaded with bio (CAR)-synthesized zinc oxide (ZnO) nanoparticles, ZnO/CAR-hPAN (hereafter called ZCPAN), were employed to develop an antimelanoma wound dressing. Inspired by the formulation of the commercial wound healing Zn-CAR complex, i.e., polaprezinc (PLZ), for the first time, we benefitted from the synergy of zinc and CAR to create an antimelanoma nanofibrous wound dressing. According to scanning electron microscopy (SEM) images, ultrafine ZnO nanoparticles were homogenously distributed throughout the nanofibrous dressing. The ZCPAN nanofiber mat showed a significantly higher toughness (18.7 MJ.m⁻³ vs. 1.4 MJ.m⁻³) and an enhanced elongation at break (stretchability) compared to the neat PAN nanofiber mat (12% vs. 9.5%). Additionally, optical coherence elastography (OCE) measurements indicated that the ZCPAN nanofibrous dressing was as stiff as 50.57 ± 8.17 kPa which is notably larger than that of the PAN nanofibrous dressing, i.e., 24.49 ± 6.83 kPa. The optimum mechanical performance of the ZCPAN nanofibers originates from physicochemical interaction of CAR ligands, hPAN nanofibers, and ZnO nanoparticles through hydrogen bonding, electrostatic bonding, and esterification, as verified using ATR-FTIR. An in vitro cell viability assay using human skin melanoma cells implied that the cells are notably killed in the presence of the ZCPAN nanofibers compared to the PAN nanofibers. Thanks to ROS generating ZnO nanoparticles, this behavior originates from the high reactive oxygen species (ROS)-induced oxidative damage of melanoma cells, as verified through a CellROX assay. In this regard, an apoptotic cell response to the ZCPAN nanofibers was recorded through an apoptosis assay. Taken together, the ZCPAN nanofibers induce an antimelanoma effect through oxidative stress and thus are a high potential wound dressing material to suppress melanoma regrowth after surgical excision of skin tumors. Full article

Chitosan/polyvinyl alcohol nanofibrous mats loaded with nano-hydroxyapatite and/or curcumin are successfully fabricated by the electrospinning method for the first time. Nano-hydroxyapatite is prepared by the co-precipitation method. The XRD pattern of calcined powder at 700 °C for 2 h reveals the presence of hydroxyapatite as a sole phase. FT-IR confirms its purity. The morphology of the hydroxyapatite is studied by HR-TEM. Nano-hydroxyapatite and curcumin are added at 5 wt% with respect to the polymer weight. XRD, FE-SEM, FT-IR, and HR-TEM are used to characterize the fabricated nanofibrous mats. The results confirm the successful loading of nano-hydroxyapatite and curcumin within the fabricated mats. The in vitro antimicrobial results show that most of mats have significant antimicrobial effects against E. coli and S. aureus. The fabricated matd are biocompatible with fibroblasts and the presence of curcumin increases cell viability. Curcumin release from both CS/PVA/Cur and CS/PVA/HA/Cur nanofiber mats principally follows the Korsmeyer–Peppas and Peppas–Salhin models. Full article

The aim of this project is to fabricate fiber mats and hydrogel materials that constitute the two main components of a wound dressing material. The contributions of boric acid (BA) and zinc oxide (ZnO) to the physical and mechanical properties of polycaprolactone (PCL) is investigated. These materials are chosen for their antimicrobial and antifungal effects. Additionally, since chitosan forms brittle hydrogels, it is reinforced with polyvinyl alcohol (PVA) to improve ductility and water uptake properties. For these purposes, PCL, BA, ZnO, PVA, and chitosan are used in different ratios to fabricate nanofiber mats and hydrogels. Mechanical, physical, and chemical characteristics are examined. The highest elastic modulus and tensile strength are obtained from samples with 6% BA and 10% ZnO concentrations. ZnO-decorated fibers exhibit a higher elastic modulus than those with BA, though BA-containing fibers exhibit greater elongation before breakage. All fibers exhibit hydrophobic properties, which help to prevent biofilm formation. In compression tests, CS12 demonstrates the highest strength. Increasing the PVA content enhances ductility, while a higher concentration of chitosan results in a denser structure. This outcome is confirmed by FTIR and swelling tests. These findings highlight the optimal combinations of nanofibrous mats and hydrogels, offering guidance for future wound dressing designs that balance mechanical strength, water absorption, and antimicrobial properties. By stacking these nanofibrous mats and hydrogels in different orders, it is expected to achieve a wound care material that is suitable for various applications. The authors encourage experimentation with different configurations of these nanofiber and hydrogel stackings to observe their mechanical behavior under real-life conditions in future studies. Full article

The electrospinning process is an effective technique for creating micro- and nanofibers from synthetic and natural polymers, with significant potential for biomedical applications and drug delivery systems due to their high drug-loading capacity, large surface area, and tunable release times. Poly(L-lactic acid) (PLLA) stands out for its excellent thermo-mechanical properties, biodegradability, and bioabsorbability. Electrospun PLLA nanofibrous structures have been extensively investigated as wound dressings, sutures, drug delivery carriers, and tissue engineering scaffolds. This study aims to create and characterize electrospun PLLA membranes loaded with spironolactone (SP), mimicking active compounds of Ganoderma lucidum (GL), to develop a biodegradable patch for topical wound-healing applications. GL, a medicinal mushroom, enhances dermal wound healing with its bioactive compounds, such as polysaccharides and ganoderic acids. Focusing on GL extracts—obtained through green extraction methods—and innovative drug delivery, we created new fibers for wound-healing potential applications. To integrate complex mixtures of bioactive compounds into the fibers, we developed a prototype using a single pure substance representing the extract mixture. This painstaking work presents the results of the fabricating, wetting, moisture properties, material resilience, and full characterization of the product, providing a robust rationale for the fabrication of fibers imbued with more complex extracts. Full article

This study presents the development of multifunctional protective clothing for disabled individuals using PBAT/PLA biopolymeric-based electrospun nanofibrous membranes. The fabric consists of a superhydrophobic electrospun nanofibrous cloth reinforced with silica nanoparticles. The resulting nanofiber membranes were characterized using FE-SEM, a CA goniometer, breathability and hydrostatic pressure resistance tests, UV–vis spectroscopy, thermal infrared photography, tensile tests, and nanoindentation. The results demonstrated the integration of superhydrophobicity, breathability, and mechanical improvements in the protective clothing. The nanofibrous porous structure of the fabric allowed breathability, while the silica nanoparticles acted as an effective infrared reflector to keep the wearer cool on hot days. The fabric’s multifunctional properties make it suitable for various products, such as outdoor clothing and accessories for individuals with disabilities. This study highlights the importance of selecting appropriate textiles for protective clothing and the challenges faced by disabled individuals in terms of mobility, eating, and dressing. The innovative and purposeful design of this multifunctional protective clothing aimed to enrich the lives of individuals with disabilities. Full article

The use of biodegradable materials combined with natural metabolites in wound dressings has received much attention. Flavonoids (FLs) from green cocoons, as metabolites, have antibacterial, antioxidant, anti-inflammatory, and other pharmacological effects. In this study, composite membranes of FL-loaded polylactic glycolic acid (PLGA)/silk fibroin (SF) were prepared by an electrospinning method. The prepared membranes, including SF, exhibited a good slow-release effect and cytocompatibility. An in vitro evaluation of the FL-loaded PLGA/SF membranes demonstrated good antioxidant, antibacterial, and anti-inflammatory properties. Animal experiments showed that the wound healing rate of PLGA/SF-2.5FL membranes within 15 days was 97.3%, and that of the control group was 72.5%. The PLGA/SF-2.5FL membranes shortened the inflammatory period of a full-layer wound model and promoted skin regeneration and wound healing by downregulating expression of the pro-inflammatory cytokines IL-1β and TNF-α and promoting expression of the growth factors VEGF, TGF-β, and EGF. In summary, the PLGA/SF-2.5FL composite nanofibre membrane with anti-inflammatory properties is an ideal wound dressing to promote acute wound healing. Full article

Wound dressing is an ancient technique for promoting healing, and modern technology has led to the development of advanced dressings that enhance patient care. Nanofiber-based wound dressings are a medical innovation with enhanced properties, including improved adhesion, reduced infection rates, and increased tissue regeneration. This article focuses on electrospun nanofibrous wound dressing materials produced using the widely adopted method of electrospinning. This article explores several parameters that influence fiber size, including electrical conductivity, electric potential, collector distance, viscosity, flow rate, and surface tension. With Fucoidan (FUC) loading, an increase in the fiber diameter of the control group from 310 nm to 395 nm was observed. This research also examines the use of Halomonas Levan (HL), a polysaccharide, and polyvinyl alcohol (PVA) polymer as wound dressing materials to enhance the mechanical properties of the latter. The incorporation of various concentrations of FUC into PVA-HL electrospun nanofibers yielded diverse effects on tensile strength: an enhancement was observed in the PVA-HL-10FUC formulation, while reductions were noted in the PVA-HL-13FUC and PVA-HL-15FUC formulations. The WST1 assay demonstrated that none of the samples exhibited cytotoxicity up to 72 h, as cell viability increased over time. In conclusion, nanofibrous PVA-HL structures loaded with FUC, which promote tissue regeneration and prevent infection, could be considered a novel wound dressing material. Full article

Marigold flower is a traditionally used plant material topically applied on the skin due to its anti-inflammatory properties and antibacterial activity. This potential of action justifies the implementation of marigold extract in nanofiber scaffolds based on poly-vinylpyrrolidone/hydroxypropyl-β-cyclodextrin (PVP/HPβCD) and polycaprolactone/polyvinylpyrrolidone (PCL/PVP) obtained by electrospinning for wound treatment. Using SEM, the morphology of electrospun scaffolds showed a fiber diameter in the range of 298–527 nm, with a uniform and bead-free appearance. ATR-FTIR spectroscopy confirmed the presence of marigold extracts in nanofibrous scaffolds. The composition of the nanofibers can control the release; in the case of PVP/HPβCD, immediate release of 80% of chlorogenic acid (an analytical and functional marker for marigold extract) was achieved within 30 min, while in the case of PCL/PVP, the controlled release was achieved within 24 h (70% of chlorogenic acid). All systems showed weak antibacterial activity against skin and wound-infecting bacteria Staphylococcus aureus (MIC 100 mg/mL), and Pseudomonas aeruginosa (MIC 200 mg/mL) and yeasts Candida albicans (MIC 100 mg/mL). Analysis of the effect of different scaffold compositions of the obtained electrofibers showed that those based on PCL/PVP had better wound healing potential. The scratch was closed after 36 h, compared to the 48 h required for PVP/HPβCD. Overall, the study shows that scaffolds of PCL/PVP nanofibers loaded with classic marigold extract have the best potential as wound dressing materials because of their ability to selectively modulate inflammation (via inhibition of hyaluronidase enzyme) and supportive antimicrobial properties, thereby aiding in the early stages of wound healing and repair. Full article