Search Results (140)

Global requirement of clean, cost-effective and sustainable energy has stimulated massive research and development in photocatalytic materials that have the potential to harvest solar based energy while mitigating the environmental issues. Among various materials, perovskite oxides have emerged as a promising energy resource. Owing to the structural versatility, optical and electrical properties, chemical inertness allows the use of material of multifunctional prospects. Currently Strontium titanate (SrTiO₃), a vital perovskite oxide having a band gap nearly ~3.2 eV, is showing significant function for photocatalytic water splitting, carbon dioxide conversion and degradation of organic pollutants. Though within the UV spectrum, its intrinsic photocatalytic behavior is limited to approaches such as graphene junctions, noble-metal support, and post-synthetic heat treatment seem to promote the adsorption within visible-light. Strontium titanate also demonstrates photo charge separation efficiency, and long-term catalytic durability. Moreover, modifications and hydrothermal synthesis have proven extremely efficient for nano-based engineering, control over crystal diameter, defects, and shape, which can result in magnificent composites that can be promising substitutes. Therefore, further research is imperative regarding these material application prospects. This comprehensive review provides insights into details on the potential of nanoengineering and composite approaches to reduce the inherent limitations of perovskite oxides, especially Strontium titanate, and enabling additional applications in next-generation photovoltaic and solar energy harvesting technologies. Full article

Backfilling the industrial solid waste coal gangue into deep coal mine goafs for CO₂ geological sequestration is a crucial pathway to achieve the synergistic effect of pollution reduction and carbon mitigation. However, in complex deep geological environments, the chemical evolution of multiple mineral phases of coal gangue under gas–water–rock coupling effects and the carbon-controlling mechanism of residual total organic carbon (TOC) remain unclear. In this study, coal gangue from the goaf of the Xiaobaodang Coal Mine was used as the research object. Relying on a customized high-temperature and high-pressure reaction system to simulate the deep in situ environment (45 °C, 10 MPa), and combined with X-ray diffraction (XRD), total organic carbon determination, and isothermal CO₂ adsorption experiments, the geochemical mechanism by which inorganic minerals and organic residual carbon synergistically control the ultimate CO₂ adsorption potential was systematically revealed. The results show that the modification of the CO₂ adsorption potential of coal gangue by gas–water–rock reactions exhibits strong mineral phase differentiation. Systems rich in active silicates generate a large amount of secondary clay minerals through intense carbonation alteration, achieving a significant increase in micro–nano pores and absolute adsorption capacity. Systems rich in carbonates steadily release deep primary adsorption potential by widening mass transfer channels through mineral dissolution. In contrast, systems rich in primary clay minerals face an irreversible attenuation of adsorption space due to physical clogging of pore throats caused by fluid migration. Furthermore, the initial organic carbon content exerts a significant non-linear regulatory effect on the development of the micropore network. The physical adsorption sites provided by the high relative content of layered clay minerals (>41%), coupled with the interfacial enhancement effect exerted by a moderate organic carbon content (0.12~0.16%), constitute an optimal physicochemical synergistic enhancement network, which is the core geological reason for stimulating the ultimate carbon sequestration capacity of coal gangue. The results of this study not only enrich the multiphase interfacial thermodynamic theory of complex heterogeneous geological bodies but also provide solid theoretical support for the precise optimization of target areas and the long-term evaluation of carbon sinks in goaf CO₂ sequestration engineering. Full article

Highly pathogenic avian influenza (HPAI) is a lethal disease of poultry that has recently spilled over into mammals, including dairy cattle and humans, heightening concerns for livestock health, food security, and pandemic emergence. While vaccines that induce neutralizing antibodies against hemagglutinin and neuraminidase provide strain-specific protection, durable cross-subtype immunity requires T-cell responses targeting conserved internal antigens such as nucleoprotein (NP). To leverage these conserved targets, we utilized a previously engineered mosaic nucleoprotein (MNP) incorporating T-cell epitopes from thousands of influenza A virus (IAV) strains, conferring broad protection against epidemic (H3N2) and pandemic (H1N1) IAV in mice. Here, we tested whether precision adjuvancy could differentially imprint adaptive immunity to MNP in cattle. Combination formulations paired the carbomer-based nano-emulsion Adjuplex (ADJ) with either a STING agonist (cyclic dinucleotides; CdN) or a TLR4 agonist (glucopyranosyl lipid A; GLA) to program distinct inflammatory milieus. Both formulations elicited circulating IFN-γ–producing T cell responses and NP-specific antibodies in serum and milk. However, STING activation via CdN generated more potent and consistent cellular and humoral immunity than TLR4 engagement. These data demonstrate that selective activation of innate sensing pathways functionally imprints adaptive immune magnitude and quality in a large animal host. By advancing a broadly protective, T-cell-focused vaccine strategy in cattle, this work supports a One Health framework to mitigate H5N1 transmission risk at the human–animal interface. Full article

Plenty of nano-antimicrobial materials have been developed successively, aiming to address severe clinical challenges such as wound healing disorders and high postoperative mortality rates caused by drug-resistant bacterial infections. However, their reliance on external stimuli (light, thermal energy, or exogenous H₂O₂ addition) for bactericidal activation severely hampers clinical translation from bench to bedside. Herein, we report an engineered Cu/CeO₂ nanoplatelet (NP) system that functions as a stimulus-independent, time-dependent nano-antibiotic against methicillin-resistant Staphylococcus aureus (MRSA), while also exhibiting broad-spectrum antibacterial activity. In a skin wound model infected with MRSA, topical application of only 1 μg/mL achieved near-complete wound closure within 10 days. The satisfactory therapeutic effect is concluded: (1) Cu/CeO₂ NPs continuously release Cu²⁺, which damages the integrity of bacterial cell membranes and achieves efficient sterilization. (2) The antioxidant stress capacity, peroxidase, and catalase-like activity effectively alleviate oxidative stress and hypoxia conditions in the infected microenvironment, and synergistically exert multiple biological effects such as anti-inflammatory, promoting collagen deposition and the formation of new blood vessels. This study not only provides a feasible pathway for the clinical application of antibacterial nano-materials, but also offers theoretical support and practical examples for the rational design of multifunctional nano-antibiotics. Full article

The development of sustainable, high-performance construction materials is essential for enhancing the resilience and economic efficiency of infrastructure in seismically active regions. Although nanomaterials can improve concrete performance, the combined influence of hybrid nanomaterial systems—particularly those sourced from agricultural and industrial waste streams—on early-age behavior, building-scale seismic response, and cost efficiency remains insufficiently quantified. This study presents an integrated experimental and numerical assessment of high early-strength concrete (HESC) incorporating nano-silica (NS), nano-clay (NCl), and cellulose nanofibers (NCels). Experimental results indicate that the optimized mixture (HESC-O) achieved a 3.15-fold increase in 28-day compressive strength, a 93.3% reduction in water penetration depth, and an 88.7% decrease in corrosion rate compared with conventional concrete. Finite element analyses of low-, mid-, and high-rise building models showed that HESC-O increased lateral stiffness and reduced story drift by up to 30% compared to normal concrete (NC); improvements over reference HESC (HESC-R) were of 5–10% and lateral displacement differed by 25–40%, with the most pronounced improvements observed in taller structures. Despite a higher unit material cost, the cost–benefit analysis demonstrated substantial net savings, particularly for high-rise buildings, primarily due to a 52% reduction in column cross-sectional areas and the associated increase in usable floor space. The findings support the performance-based selection of nano-engineered concrete that balances structural performance, economic value, and sustainability. Full article

Geopolymer gel concrete (GPC) is a kind of environmentally friendly concrete, which has become a potential alternative material to replace ordinary concrete. Traditional mix design of GPC is carried out under experimental conditions, which is time-consuming and labor-intensive. Geopolymer concrete (GPC) is intended for use in hydraulic structures, which are often exposed to water environments. Water flow exerts significant abrasion and erosion on these structures. If the abrasion resistance (AR) of the material is poor, the service life and service quality of hydraulic structures will be substantially reduced under the action of water flow. Therefore, AR is a key performance indicator for GPC in hydraulic engineering applications. This abrasion resistance can be enhanced by using fibers (for example, steel fibers, polyvinyl alcohol (PVA) fibers, and basalt fibers) and nanomaterials. Furthermore, there is a complex nonlinear relationship between the proportions of fibers and nanoparticles added and the properties of GPC. In this study, the circular ring test method and the underwater steel ball test method were conducted to investigate the AR of nano-SiO₂ (NS) and hybrid fiber (NHF) reinforced geopolymer gel concrete (NHF-GPC). A backpropagation (BP) neural network (BPNN) model optimized by the Grey Wolf Optimizer (GWO) (GWO-BPNN) is established to predict the abrasion resistance strength (ARS) and the abrasion rate of NHF-GPC based on the circular ring test method. In addition, the ARS, abrasion rate, and average abrasion depth (AAD) based on the underwater steel ball test method were also predicted. The results indicate that the GWO-BPNN model demonstrates superior performance over the standard BPNN, exhibiting higher prediction accuracy, better fitting performance, and faster convergence speed. Specifically, for the circular ring test method abrasion rate prediction, GWO-BPNN reduced the root mean square error (RMSE) by 30.3% and lowered the mean absolute percentage error (MAPE) to 8.4%. The GWO-BPNN model established in this study can provide efficient and reliable theoretical support for the optimization of the NHF-GPC mix design. Full article

Periodontitis is a biofilm-associated inflammatory disease that still requires effective local non-antibiotic antibacterial strategies. In this study, we developed a protonated defect-engineered atomic-layered graphitic carbon nitride nano-system (PVCN) for visible light photodynamic antibacterial therapy. Defect engineering was used to improve visible light absorption and photodynamic activity, while protonation introduced a positively biased surface potential to strengthen bacteria–material interactions and enhance interfacial antibacterial efficacy. Under visible light irradiation, PVCN showed increased ROS production, stronger bacterial adhesion, and rapid killing activity against both Staphylococcus aureus and Escherichia coli, with bactericidal efficiency above 95%. PVCN also disrupted S. aureus biofilms and induced membrane damage, intracellular content leakage, and metabolic suppression. Atomic force microscopy and omics analyses further supported enhanced bacterial adsorption as an important contributor to the improved antibacterial efficacy of PVCN. In vitro assays demonstrated preliminary cytocompatibility and hemocompatibility. In a ligature-induced mouse periodontitis model, PVCN reduced bacterial burden, alleviated inflammation, and attenuated alveolar bone loss. These results support PVCN as a promising photodynamic antibacterial material with preliminary therapeutic potential in experimental periodontitis, and highlight bio-interface regulation as a useful strategy for designing efficient carbon nitride-based photodynamic antibacterial materials. Full article

Symmetric corrugated hierarchical honeycombs (SCHHs) are critical lightweight load-bearing structures, featuring distinctive topological architectures and excellent mechanical performance. However, they are prone to local buckling under out-of-plane compression and shear loading, which degrades their overall load-bearing capacity. To address this limitation, this work proposes an innovative dual-optimization strategy integrating cylindrical support structure introduction and nano-silica (SiO₂) matrix modification to synergistically enhance the compressive and tribological properties of SCHHs. 3D-printed SCHHs and their reinforced variant (SCHH-AC) with embedded cylindrical supports were fabricated, and the effects of nano-SiO₂ modification (0–9 wt.%) on the compressive performance and tribological behavior of the photopolymer resin matrix were systematically investigated. Experimental results demonstrate that the SCHH-AC-7% SiO₂ configuration achieves optimal compressive performance. A critical SiO₂ concentration threshold was identified: agglomeration at 9 wt.% induces severe mechanical degradation. Tribological tests confirm that SiO₂ incorporation effectively reduces the resin matrix’s friction coefficient and wear rate, with the 7 wt.% concentration yielding the lowest wear rate. Additionally, geometric parametric analysis reveals that increasing the corrugation period number and amplitude further enhances SCHH’s compressive strength and energy absorption. This study establishes a theoretical and experimental foundation for the structural design and material modification of lightweight honeycombs, advancing their practical application in high-performance engineering fields demanding lightweight load-bearing and wear resistance. Full article

NanoArduSiPM represents a paradigm shift in the ArduSiPM (Architected Detection Unit for Silicon Photomultipliers) roadmap, evolving from a standalone instrument into a high-density modular building block (36 mm × 42 mm × 3 mm, 7 g). This revision does not merely pursue miniaturization; it re-engineers the signal-processing chain to maintain high performance within a scaled-down footprint, enabling the transition from single-unit detection to scalable, distributed multi-detector systems. NanoArduSiPM is based on a three-layer architecture comprising an external scintillator and Silicon Photomultiplier (SiPM) detection module, a dedicated high-speed discrete analog front-end, and a System-on-Chip (SoC) for embedded acquisition and processing. The physical implementation adopts high-integrity PCB routing and rigorous isolation techniques designed to suppress digital–analog coupling, a critical requirement in such a compact form factor. This deterministic layout strategy provides the architectural foundation for time-tagging capabilities, currently under quantitative characterization, by addressing the fundamental sources of signal interference at the hardware level. Beyond hardware integration, NanoArduSiPM introduces the capability for extended firmware functionality, including event tagging via external inputs and the implementation of coincidence and veto logic. This framework supports the acquisition of multiple correlated histograms and allows multiple units to be interconnected on a shared SPI bus. By shifting from standalone operation to a coordinated, hierarchical architecture, NanoArduSiPM enables distributed detection schemes where event selection and correlation are handled natively within the system, reducing the dependency on external data acquisition electronics. The compact modular architecture, together with the high-performance discrete analog front-end and embedded data handling, makes NanoArduSiPM suitable for applications where low mass and low power consumption are critical, targeting applications such as space-based payloads, laboratory instrumentation, remote sensing, and large-scale distributed multi-channel detection systems. While no radiation-tolerance qualification of the complete system has been performed in this work, the microcontroller family used in the design is also available in radiation-tolerant variants, which may support future implementations targeting more demanding radiation environments. Full article

Published laboratory data on soil stabilisation are abundant, yet they remain fragmented across studies and are often difficult to reuse because of inconsistent reporting formats, heterogeneous testing conditions, and incomplete metadata. This article presents a curated experimental dataset compiled from 20 published studies on fine-grained soils, comprising 560 records, including 397 unconfined compressive strength (UCS) results and 163 California Bearing Ratio (CBR) results. The dataset is defined by the inclusion of laboratory studies designed around biopolymer-based two-additive stabilisation frameworks, while intentionally retaining untreated and single-additive comparator records reported within the same experimental programmes. This design is a key distinguishing feature of the dataset because it enables analysis of baseline soil behaviour, isolated additive effects, and combined-additive responses within a traceable study context. Across the included studies, the treatment systems cover a wide range of biopolymer- and lignin-related materials, including xanthan gum, guar gum, chitosan, sodium lignosulfonate, and electrolyte lignin stabiliser, together with complementary additives such as cement, lime, fly ash, ground granulated blast-furnace slag, rice husk ash, glass powder, concrete waste, nano-additives, and natural or synthetic fibres. In addition to UCS and CBR outcomes, the dataset preserves key contextual variables required for meaningful secondary reuse, including soil classification, grain-size fractions, Atterberg limits, compaction properties, curing duration, additive identities and dosages, and source-level traceability. The data are distributed as a structured Excel workbook comprising two cleaned outcome-specific sheets (CBR_clean and UCS_clean) and four supporting documentation sheets (StudyInventory, DataDictionary, VocabularyMap, and QC_Log). Record-level identifiers, DOI-linked source fields, inferred-curing flags, and qualified outcome descriptors are retained to support auditability, selective filtering, and reproducible reuse. The resulting dataset provides a practical foundation for comparative assessment of stabilisation strategies, pavement and subgrade engineering studies, meta-analysis, and machine learning applications in geotechnical engineering. Full article

Surface protection and functional modification of aircraft-certified aluminum alloys are essential for corrosion resistance, durability, and long-term airworthiness. At the same time, increasingly restrictive environmental regulations motivate the development of alternatives to legacy wet-chemical surface treatments. This study presents an integrated assessment of ultrafast femtosecond laser surface texturing as a surface functionalization approach for Aluminum 6061 alloys within an aerospace manufacturing and sustainability context. Ultrashort-pulse laser processing enables controlled micro- and nano-scale surface topographical modification with limited thermal impact, allowing adjustment of wettability and surface functionality while preserving bulk material integrity. As a dry and contactless process, femtosecond laser treatment eliminates the use of hazardous chemicals, reduces consumable inputs, and generates minimal secondary waste. A streamlined cradle-to-gate life cycle assessment conducted in accordance with ISO 14040/14044 indicates a lower global-warming potential per functional unit compared with conventional surface treatments, including anodization, plasma-assisted coatings, and organic coating systems. Complementary qualitative analyses addressing environmental health and safety, supply-chain risk, and ESG alignment indicate potential advantages related to occupational safety, regulatory compliance, waste management, and end-of-life recyclability. The investigation is performed on planar Aluminum 6061 reference surfaces with a treated area of 25 mm², providing a controlled laboratory-scale basis for analyzing process behavior, functional surface modification, and associated environmental metrics. Within this defined scope, the results support further evaluation of femtosecond laser surface texturing as a surface engineering option for future aerospace manufacturing. Full article

Water-induced deterioration of silty soil subgrade in the lower Yellow River floodplain poses a critical, long-standing engineering challenge. Most existing studies on silty soil modification prioritize strength enhancement via traditional cementitious binders (i.e., cement, lime), yet these strategies fail to fundamentally block water migration in the soil matrix. A distinct scientific gap persists: the capillary water inhibition mechanism of nano-superhydrophobic modified Yellow River alluvial silt, along with the correlation between its microstructural evolution and macroscopic engineering performance, has yet to be systematically elucidated. To fill this gap, we conducted hydrophobic modification of the targeted silt using a nano-superhydrophobic material (NSHM), and performed a systematic suite of laboratory tests to characterize its hydrophobicity, mechanical properties, water stability, and microstructural characteristics. Quantitative experimental results demonstrate that NSHM imparts remarkable water resistance to the silt: at an NSHM dosage ≥0.5%, the modified soil exhibits stable superhydrophobicity across all tested compaction degrees, with over a 99% reduction in saturated hydraulic conductivity. Notably, the hydrophobic modification only incurs a <12% reduction in the dry unconfined compressive strength (UCS) of the silt. Microscopic characterization results reveal that NSHM modifies the silt via two core pathways: uniform particle encapsulation and pore infilling, without altering the inherent mineral functional groups of the soil. This microstructural regulation reduces the average pore diameter by 38.2% and total porosity by 15.6%, while optimizing the uniformity of pore size distribution. Based on comprehensive evaluation of overall performance, a minimum NSHM dosage of 0.5% is recommended for in situ application in local silty soil subgrade. This study provides critical theoretical guidance and technical support for water damage mitigation in alluvial silty soil subgrade. Full article

Solution electrospinning (SES) and melt electrowriting (MEW) are complementary fiber-based fabrication platforms extensively investigated in tissue engineering. SES generates fibers typically ranging from the nanometer to the low-micrometer scale, producing fibrous networks that mimic the native extracellular matrix (ECM) and support key cellular functions. MEW, by contrast, operates solvent-free and enables precise, layer-by-layer deposition of microfibers with well-controlled geometry, conferring the mechanical integrity and open-pore architecture that SES constructs inherently lack. Despite growing interest, the body of peer-reviewed literature reporting original hybrid SES–MEW fabrication and biological outcome data remains limited, with no comprehensive cross-tissue synthesis available to date. This narrative review examines the current state of SES–MEW hybrid strategies across five tissue engineering targets selected for their clinical relevance: skin, vascular grafts, bone, cartilage, cardiac valves, and skeletal muscle. For each application, the architectural rationale, the fabrication approach, and the in vitro and in vivo biological outcomes are discussed in an integrated manner, with attention to how the spatial organization of nano- and microfibers translates into tissue-specific functional responses. A comparative analysis across tissue types highlights both the versatility of hybrid constructs and their persistent limitations, including suture retention values that remain below clinically accepted thresholds in vascular applications, incomplete cellular infiltration through dense nanofibrous layers, and the absence of validated, reproducible scale-up protocols compatible with clinical-grade manufacturing. The review concludes by identifying the most critical open questions in the field, encompassing process standardization, regulatory classification, and the emerging role of machine learning in closed-loop MEW process optimization. This work aims to provide an evidence-based perspective on the current state of hybrid SES–MEW scaffold engineering and the key translational gaps limiting clinical application. Full article

As solid waste generated from shield tunnel construction, shield muck is characterized by its massive volume, high water content, and poor engineering properties. Large-scale stockpiling not only occupies precious land resources but also poses potential environmental risks. This has become one of the key bottlenecks hindering the green, low-carbon, and sustainable development of rail transit construction. Efficient dewatering is a key prerequisite for its subsequent disposal or reutilization. Lime, cement, phosphogypsum, nano-SiO₂, and ground granulated blast furnace slag were employed in this research as composite conditioning agents to dewater shield tunnel muck. A range of water content, pH, and total organic carbon analyses tests were conducted to explore the roles of lime, cement, phosphogypsum, nano-SiO₂, and ground granulated blast furnace slag on the dewatering effect of shield tunnel muck. Furthermore, microstructures and elemental distribution of typical mixes were analyzed by scanning electron microscopy and energy-dispersive X-ray spectroscopy tests. Results indicate that a composite agent consisting of 3.5% lime, 4% cement, 1% phosphogypsum, 0.2% nano-SiO₂, and 4% ground granulated blast furnace slag exhibits optimal performance, reducing water content from 50% to 29.8% within 24 h. Phosphogypsum significantly decreased pH and reduced TOC to below 1 g/kg after 15 days, effectively mitigating the environmental hazards associated with muck disposal. The formation of cementitious products, including calcium aluminate hydrate, calcium aluminosilicate hydrate gels, and calcium silicate hydrate, effectively bonds soil particles. Additionally, ettringite crystals produced by the reaction between phosphogypsum and calcium aluminate phases filled interparticle voids. These processes were identified as the primary mechanisms for water reduction. Although nano-SiO₂ exerted a limited direct influence on water content, it acted as a pozzolanic catalyst that accelerated hydration reactions of lime and cement, rapidly reducing muck fluidity. The synergistic effect of the composite dewatering agent components establishes a multi-mechanism dewatering system characterized by “hydration gel + AFt filling + nano-catalysis.” The dewatering system developed in this study achieves both high efficiency and environmental friendliness for shield tunnel muck. This provides technical support for subsequent resource utilization, such as subgrade filling, while promoting the recycling of industrial solid wastes like phosphogypsum and blast furnace slag, ultimately contributing to green, low-carbon, and sustainable development. Full article

Surface-enhanced Raman spectroscopy (SERS) amplifies Raman scattering by placing molecules in the near-field of plasmonic nanostructures, enabling label-free molecular fingerprinting. While attractive for living cell phenotyping, many cellular SERS works rely on internalized colloidal nanoparticles, leading to variable uptake/localization, aggregation-driven hotspot fluctuations, and potential cellular perturbation. Here, we report a chip-like Au/SiO₂ nanolaminate SERS substrate that supports direct culture and label-free measurements of living cells on spatially defined hotspots without nanoparticle uptake. The periodic nanolaminate forms dense nanogaps and is engineered for 785 nm excitation, providing uniform enhancement over a large, culture-compatible area with high hotspot uniformity. By engineering the cell–substrate nano–bio interface, the platform enables reproducible acquisition of intrinsic cellular vibrational fingerprints under physiological conditions without Raman tags. Using MCF-7 and MDA-MB-231 breast cancer cells, we collected hundreds of spectra per line, and MDA-MB-231 exhibited broader spectral variations, indicating greater heterogeneity. Principal component analysis and linear discriminant analysis achieved 99% classification accuracy for MCF-7 and MDA-MB-231, and bright-field imaging confirmed preserved adhesion and canonical morphologies. This chip-based, label-free living cell SERS platform enables scalable, nonperturbative phenotyping and may support rapid malignancy classification and treatment response screening across subtle cancer states. Full article