Search Results (257)

Urban forests are vital to cities because they provide a range of ecosystem services, including carbon (C) sequestration, air purification, and urban cooling. However, urban forestry also generates significant amounts of organic waste, such as grass clippings, pruned tree branches, and fallen tree leaves and woody debris that can contribute to greenhouse gas (GHG) emissions if not properly managed. In this study, we investigated the effect of wheat straw biochar (produced at 500 °C) on GHG emissions from two types of urban forestry waste: green waste (GW) and yard waste (YW), using a 100-day laboratory incubation experiment. Overall, GW released more CO₂ than YW, but biochar addition reduced cumulative CO₂ emissions by 9.8% in GW and by 17.6% in YW. However, biochar increased CH₄ emissions from GW and reduced the CH₄ sink strength of YW. Biochar also had contrasting effects on N₂O emissions, increasing them by 94.3% in GW but decreasing them by 61.4% in YW. Consequently, the highest global warming potential was observed in biochar-amended GW (125.3 g CO₂-eq kg⁻¹). Our findings emphasize that the effect of biochar on GHG emissions varies with waste type and suggest that selecting appropriate biochar types is critical for mitigating GHG emissions from urban forestry waste. Full article

The increasing demand for rapid, sensitive, and eco-friendly methods for the detection of trace heavy metals in environmental samples, attributed to their serious threats to health and the environment, has spurred considerable interest in the development of sustainable sensor materials. Toxic metal ions, namely, lead (Pb²⁺), cadmium (Cd²⁺), mercury (Hg²⁺), arsenic (As³⁺), and chromium, are potential hazards due to their non-biodegradable nature with high toxicity, even at trace levels. Acute health complications, including neurological, renal, and developmental disorders, arise upon exposure to such metal ions. To monitor and mitigate these toxic exposures, sensitive detection techniques are essential. Pre-existing conventional detection methods, such as atomic absorption spectroscopy (AAS) and inductively coupled plasma-mass spectrometry (ICP-MS), involve expensive instrumentation, skilled operators, and complex sample preparation. Electrochemical sensing, which is simple, portable, and eco-friendly, is foreseen as a potential alternative to the above conventional methods. Carbon-based nanomaterials play a crucial role in electrochemical sensors due to their high conductivity, stability, and the presence of surface functional groups. Biochar (BC), a carbon-rich product, has emerged as a promising electrode material for electrochemical sensing due to its high surface area, sustainability, tunable porosity, surface rich in functional groups, eco-friendliness, and negligible environmental footprint. Nevertheless, broad-spectrum studies on the use of biochar in electrochemical sensors remain narrow. This review focuses on the recent advancements in the development of biochar-based electrochemical sensors for the detection of toxic heavy metals such as Pb²⁺, Cd²⁺, and Hg²⁺ and the simultaneous detection of multiple ions, with special emphasis on BC synthesis routes, surface modification methodologies, electrode fabrication techniques, and electroanalytical performance. Finally, current challenges and future perspectives for integrating BC into next-generation sensor platforms are outlined. Full article

Dry Turkish oak (Quercus cerris) sawdust, untreated and treated with three activators, (H₃PO₄, NaOH and H₂O₂) was pyrolyzed under limited-oxygen conditions to obtain biochar samples. The electrochemical properties of these samples were tested and compared to the properties of several commercial carbon blacks. The electrochemical characterization was performed via cyclic voltammetry, analyzing the response toward two commonly used redox probes, [Fe(CN)₆]^3−/−4− and [Ru(NH₃)₆]^2+/3+. The influence of the scan rate on this response was investigated, and the resulting data were used to obtain the values of the heterogenous charge transfer constant, k₀. Higher k₀ values were observed for carbon blacks than for investigated biochar samples. The detection of 4-nitrophenol and heavy metal ions was used to assess the applicability of biochars for electroanalytical purposes. The response of untreated biochar was comparable with the response of Vulcan carbon black, which showed the best response of all analyzed carbon blacks. Full article

Construction and demolition byproducts include substantial amounts of wood panel waste (WPW) that pose environmental challenges. They also create opportunities for sustainable resource recovery. This study investigates the potential of WPW-derived biochar as an efficient adsorbent for phenol removal from aqueous solutions. Biochar was produced via pyrolysis at 450 °C and subsequent activation at 750, 850, and 950 °C. The biochar’s physicochemical properties, including surface area, pore volume, and elemental composition, were characterized using advanced methods, including BET analysis, elemental analysis, and adsorption isotherm analysis. Activated biochar demonstrated up to nine times higher adsorption capacity than raw biochar, with a maximum of 171.9 mg/g at 950 °C under optimal conditions: pH of 6 at 25 °C, initial phenol concentration of 200 mg/L, and biochar dosage of 1 g/L of solution for 48 h. Kinetic and isotherm studies revealed that phenol adsorption followed a pseudo-second-order model and fit the Langmuir isotherm, indicating chemisorption and monolayer adsorption mechanisms. Leaching tests confirmed the biochar’s environmental safety, with heavy metal concentrations well below regulatory limits. Based on these findings, WPW biochar offers a promising, eco-friendly solution for wastewater treatment in line with circular economy and green chemistry principles. Full article

Organic amendments provide a sustainable strategy to enhance soil quality in degraded environments while also helping to reduce greenhouse gas emissions, for example, by improving soil structure, minimizing the use of synthetic fertilizers, and promoting a green economy. This study assessed the comparative effects of two organic amendments—vermicompost leachate and biochar—on the performance of popcorn maize (Zea mays L. var. everta) cultivated in saline soil conditions. Four treatments were evaluated: T0 (Control), T1 (Vermicompost leachate), T2 (Biochar), and T3 (Vermicompost leachate + Biochar), each with 10 replicates arranged in a Completely Randomized Design (CRD). Although various soil physicochemical, microbiological, and agronomic parameters displayed no significant differences compared to the control, the application of biochar resulted in considerable improvements in soil total organic carbon, the microbial community (mesophilic aerobic bacteria, molds, and yeasts), and increased seed length and diameter. In contrast, vermicompost leachate alone negatively impacted plant growth, leading to decreases in leaf area, stem thickness, and grain yield. Specifically, grain yield declined by 46% with leachate alone and by 31% when combined with biochar, compared to the control. These findings emphasize the superior effectiveness of biochar over vermicompost leachate as a soil amendment under saline conditions and highlight the potential risks of widely applying compost teas in stressed soils. It is recommended to conduct site-specific assessments and screenings for phytotoxins and phytopathogens prior to use. Additionally, the combined application of leachate and biochar may not be advisable given the tested soil characteristics. Full article

This study investigates the synthesis of highly porous ZnCl₂-activated biochars derived from sawdust through controlled pyrolysis at 300 °C and 500 °C, aiming to enhance CO₂ adsorption performance. The effects of pyrolysis temperature and chemical activation on particle size distribution, surface area, and pore structure are systematically analyzed. Particle size analysis reveals that higher pyrolysis temperature and ZnCl₂ activation significantly reduce both median and mean particle sizes, resulting in finer and more uniform biochar morphology. BET analysis demonstrates a substantial increase in specific surface area and micropore volume upon ZnCl₂ activation, particularly at 500 °C, where the activated biochar (S500ZC) exhibits a high surface area of 717.60 m²/g and a micropore area of 616.60 m²/g. CO₂ adsorption isotherms recorded at 25 °C confirm that both thermal treatment and activation markedly enhance adsorption capacity, with the highest uptake of 35.34 cm³/g achieved by S500ZC. The adsorption performance follows the order: S300NZC < S300ZC < S500NZC < S500ZC, closely correlating with microporosity and surface textural development. The findings highlight the potential of ZnCl₂-activated biochars as cost-effective, environmentally friendly, and efficient sorbents for scalable CO₂ mitigation technologies. Full article

5-Hydroxymethylfurfural (HMF) is a versatile platform molecule with the potential to replace many fossil fuel derivatives. It can be obtained through the dehydration of carbohydrates. In this study, we present a simple and cost-effective microwave-assisted method for producing HMF. This method involves the use of readily available sucrose as a substrate and glucose-derived bifunctional hydrochars as carbocatalysts. These catalysts were produced via hydrothermal carbonisation using thiourea and urea as nitrogen and sulphur sources, respectively, to introduce Brønsted acidic and basic sites into the materials. Using a microwave reactor, we found that the S, N-doped hydrochars were active in sucrose dehydration in water. Catalytic results showed that HMF yield depended on the balance between acidic and basic sites as well as the types of S and N species present on the surfaces of these hydrochars. The best-performing catalyst achieved an encouraging HMF yield of 37%. The potential of N, S-co-doped biochar as a green solid catalyst for various biorefinery processes was demonstrated. A simple kinetic model was developed to elucidate the kinetics of the main reaction pathways of this cascade process, showing a very good fit with the experimental results. The calculated rate constants revealed that reactions with a 5% sucrose loading exhibited significantly higher fructose dehydration rates and produced fewer side products than reactions using a more diluted substrate. No isomerisation of glucose into fructose was observed in an air atmosphere. On the contrary, a limited rate of isomerisation of glucose into fructose was recorded in an oxygen atmosphere. Therefore, efforts should focus on achieving a high glucose-to-fructose isomerisation rate (an intermediate reaction step) to improve HMF selectivity by reducing humin formation. Full article

The disposal of wastewater resulting from petroleum industries presents a major environmental challenge due to the presence of hard-to-degrade organic pollutants, such as oils and hydrocarbons, and high chemical oxygen demand (COD). In this study, an efficient and eco-friendly method was developed to treat such wastewater using a photocatalyst composed of biochar derived from pistachio shells and loaded with zinc oxide (ZnO) nanoparticles. The biochar-ZnO composite was prepared via a co-precipitation-assisted pyrolysis method to evaluate its efficiency in the photocatalytic degradation of petroleum wastewater (PW). The synthesized material was characterized using various techniques, including scanning electron microscopy (SEM), X-ray diffraction (XRD), and Fourier transform infrared (FTIR) spectroscopy, to determine surface morphology, crystal structure, and functional groups present on the catalyst surface. Photocatalytic degradation experiments were conducted under UV and sunlight for 90 h of irradiation to evaluate the performance of the proposed system in removing oil and reducing COD levels. Key operational parameters, such as pH (2–10), catalyst dosage (0–0.1) g/50 mL, and oil and COD concentrations (50–500) ppm and (125–1252) ppm, were optimized by response surface methodology (RSM) to obtain the maximum oil and COD removal efficiency. The oil and COD were removed from PW (90.20% and 88.80%) at 0.1 g/50 mL of PS/ZnO, a pH of 2, and 50 ppm oil concentration (125 ppm of COD concentration) under UV light. The results show that pollutant removal is slightly better when using sunlight (80.00% oil removal, 78.28% COD removal) than when using four lamps of UV light (77.50% oil removal, 75.52% COD removal) at 0.055 g/50 mL of PS/ZnO, a pH of 6.8, and 100 ppm of oil concentration (290 ppm of COD concentration). The degradation rates of the PS/ZnO supported a pseudo-first-order kinetic model with R² values of 0.9960 and 0.9922 for oil and COD. This work indicates the potential use of agricultural waste, such as pistachio shells, as a sustainable source for producing effective catalysts for industrial wastewater treatment, opening broad prospects in the field of green and nanotechnology-based environmental solutions in the development of eco-friendly and effective wastewater treatment technologies under solar light. Full article

The Caribbean faces many environmental issues, and the mitigation and adaptation strategies to address the challenges of global warming are not sufficient in this geographical region. Considering that agriculture is a relevant activity in most countries around this region, our study proposes to enhance Caribbean waste management by transitioning to a sustainable and resilient process in the framework of a green, circular economy. The research has been focused on the thermochemical transformation of the typical residues of Caribbean farm products (plantain rachis, and cassava peel). Biochar samples were synthesized from these biomasses by the slow pyrolysis method at different temperatures (300 °C, 400 °C, and 500 °C). Biochar samples with a smooth surface were synthesized from plantain rachis biomass, while biochar samples with a porous surface were obtained from cassava peel biomass. At the same pyrolysis temperature, all biochar samples derived from plantain rachis exhibited higher production biochar yields than those biochar samples derived from cassava peel. The yield percentages were determined to be 65.7% and 62.0% at a pyrolysis temperature of 300 °C; 45.6% and 37.5% at 400 °C; and 33.7% and 25.4% at 500 °C, respectively. XRD measurements revealed that both biomass-derived biochar samples were found to be enriched with several compounds, such as kalicinite, arcanite, sylvite, CaO₃Si, and MgO₃Si, which vary according to the pyrolysis temperature. FTIR analysis revealed the presence of carbonyl and carboxyl functional groups on the surface of all biochar samples. However, only the aliphatic functional groups were observed on the surface of the biochar samples derived from cassava peel. These characteristics are of particular relevance due to their potential application in soil amendment or water remediation. Full article

The gleyed paddy soils in subtropical China, characterized by poor structure, high reductive substances, and low fertility, pose challenges to sustainable agriculture. This study investigates the improvement effects of applying rapeseed green manure in combination with biochar or vermicompost through field experiments, aiming to provide a theoretical basis for the organic improvement of gleyed paddy soils. The experiment included four treatments: control (CK), rapeseed green manure (GM), GM + biochar (GMB), and GM + vermicompost (GMVC). Soil physicochemical properties, aggregate stability, and fungal communities were analyzed after rice harvest. GM significantly increased the total nitrogen (TN) content in the 0–10 cm soil layer and decreased the Fe²⁺ and total glomalin-related soil protein (T-GRSP) contents. GMVC further increased the pH value, available potassium (AK) content, and Shannon index in the 0–10 cm soil layer, decreased the available phosphorus (AP) content, and increased the proportion of macro-aggregates (>2000 µm) and decreased the fractal dimension (D) in the 10–20 cm soil layer. Compared with GMVC, GMB more significantly increased the soil organic carbon content and regulated the ratio of EE-GRSP/T-GRSP in the 0–10 cm soil layer. Fungal community analysis showed Ascomycota dominance. Pearson analysis showed Westerdykella enrichment significantly correlated with reduced T-GRSP. Monte Carlo tests identified pH and SOC as key factors shaping fungal communities. The GMB strategy mitigates reductive stress, enhances nutrient availability, and activates microbial functionality. These findings offer insights and frameworks for sustainable soil management in subtropical rice agroecosystems. Full article

Waste biomass gasification can contribute to the production of alternative and environmentally sustainable green fuels. Research at the CREC–UWO (Chemical Reactor Engineering Center–University of Western Ontario) considers an integrated gasification process where both electrical power, biochar, and tar-free syngas suitable for alcohol synthesis are produced. In particular, the present review addresses the issues concerning tar removal from the syngas produced in a waste biomass gasifier via a catalytic post-gasification (CPG) downer unit. Various questions concerning CPG, such as reaction conditions, thermodynamics, a Tar Conversion Catalyst (TCC), and tar surrogate chemical species that can be employed for catalyst performance evaluations are reported. Catalyst performance-reported results were obtained in a fluidizable CREC Riser Simulator invented at CREC–UWO. The present review shows the suitability of the developed fluidizable Ni–Ceria γ-alumina catalyst, given the high level of tar removal it provides, the minimum coke that is formed with its use, and the adequate reforming of the syngas exiting the biomass waste gasifier, suitable for alcohol synthesis. Full article

This study explores biochar-based catalysts made from hardwood (HW) and wheat straw (WS) biomass for activating persulfate (PS) in the removal of lindane and β-endosulfan from water. The effects of pyrolysis temperature, solution pH, and PS concentration were investigated. The results indicated that both feedstock and pyrolysis temperature are key factors influencing biochar composition. Biochars pyrolyzed at 700 °C exhibited higher surface areas compared to those pyrolyzed at 400 °C, suggesting more effective interactions with the target pesticides. Changes in pH had a minimal impact on pesticide removal, while increasing the PS concentration from 0.5 to 3 mM accelerated degradation. However, further increases in PS concentration slowed the degradation of both pesticides. Under optimal conditions (pH of 7.0 ± 0.2 and PS concentration of 3 mM), the HW700/PS and WS700/PS systems achieved > 90% removal of pesticides within 4 h. Quenching experiments confirmed that non-radical species (¹O₂), generated through persulfate activation by biochar, were the key factor in lindane degradation in both systems, supporting the catalytic role of biochar rather than mere adsorption. In the HW700/PS system, SO₄^•−, HO^•, and ¹O₂ acted synergistically to enhance the degradation of β-endosulfan, whereas in the WS700/PS system, the degradation was mainly driven by SO₄^•− and ¹O₂. Notably, HW700 biochar maintained its activation efficiency during β-endosulfan degradation even after five cycles. This research offers new insights into the potential of biochar-activated PS as a green, cost-effective, and efficient method for water treatment, addressing pesticide-contaminated surface water and promoting agricultural waste recycling. Full article

It is essential to emphasize the significant impacts of climate change, which are evident in the form of severe and prolonged droughts, hurricanes, snowstorms, and other climatic disturbances. These challenges are particularly pronounced in urban environments and among human populations. The situation is further aggravated by the increasing utilization of available open spaces for residential and industrial development, leading to heightened energy consumption, elevated pollution levels, and increased carbon emissions, all of which negatively affect public health. The primary objective of this review article is to provide a comprehensive evaluation of current research, with a particular focus on the innovative use of residual biomass from urban vegetation for biochar production in the United States. This research entails an exhaustive review of existing literature to assess the implementation of a carbon-negative wood biomass biochar system as a strategic approach to sustainable urban management. By transforming urban wood waste—including tree trimmings, construction debris, and storm-damaged timber—into biochar through pyrolysis, a thermochemical process that sequesters carbon while generating renewable energy, we can leverage this valuable resource. The resulting biochar offers a range of co-benefits: it enhances soil health, improves water retention, reduces stormwater runoff, and lowers greenhouse gas emissions when applied in urban green spaces, agriculture, and land restoration projects. This review highlights the advantages and potential of converting urban wood waste into biochar while exploring how municipalities can strengthen their green ecosystems. Furthermore, it aims to provide a thorough understanding of how the utilization of woody biomass biochar can contribute to mitigating urban carbon emissions across the United States. Full article

Biochar-based materials have gathered increasing attention as sustainable catalysts for carbon dioxide (CO₂) valorization, offering a green alternative to traditional metal-based systems. Produced from renewable biomass through pyrolysis, biochar possesses key features—such as high surface area, rich porosity and tunable surface chemistry—that make it particularly suited for heterogeneous catalysis. This review highlights recent advances in the use of biochar-derived catalysts for key CO₂ conversion reactions, focusing on cycloaddition to epoxides, dry reforming of methane and catalytic biomass upgrading. Emphasis is given to the role of biochar’s origin and preparation methods, which critically influence its structure, surface functionality and catalytic performance. Feedstocks rich in mineral content or oxygenated groups, for instance, can enhance CO₂ activation and product selectivity. Furthermore, tailored modifications—such as doping with heteroatoms or supporting metal nanoparticles—further boost catalytic activity and stability by tuning acid–base behavior, while maintaining low toxicity and cost-effectiveness. Compared to conventional catalysts, biochar-based systems offer advantages in low cost, recyclability and resistance to deactivation. Challenges remain in standardizing production methods, controlling structural variability, minimizing metal leaching and scaling up. This review presents biochar as a versatile, renewable platform for CO₂ utilization, highlighting the importance of rational design, feedstock selection and functionalization strategies for developing efficient, sustainable catalytic systems, in line with green chemistry and circular economy principles. Full article

The presence of tetracycline hydrochloride (TC) in the environment poses significant risks to human health and ecological stability, necessitating the development of effective and rapid removal strategies. In this research, we investigate the efficacy of degrading tetracycline hydrochloride using cobalt-doped-biochar (Co-BC)-activated peroxymonosulfate (PMS) and the underlying mechanisms of this process. The research objectives and conclusions were as follows: (1) Co-BC materials were synthesized from balsa wood powder through a process of impregnation followed by high-temperature calcination. Characterization techniques such as SEM, XRD, FTIR, and XPS were used to confirm the material’s structure and composition. (2) In a TC solution of 20 mg L⁻¹, the use of 100.0 mg L⁻¹ of Co-BC and 1.0 mM PMS led to a TC degradation efficiency of 96.2% within 30 min. (3) The Co-BC+PMS system exhibited wide pH adaptability (4.34–9.02) and strong resistance to environmental matrix interference (Cl⁻, ${\mathrm{NO}}_3^{-}$, and ${\mathrm{SO}}_4^{2-}$). (4) Free-radical quenching experiments indicated that sulfate radicals ($\mathrm{S}{\mathrm{O}}_4^{•-}$) were the primary reactive species in TC degradation. The 11 intermediates of TC were analyzed using LC-MS, and two possible degradation pathways were deduced. In summary, this study offers significant, valuable insights into and technical support for the green, efficient, and environmentally friendly removal of antibiotics from sewage. Full article