Search Results (526)

Ion beam figuring (IBF) is an ultra-high-precision surface finishing technology characterized by a distinct trade-off between the spot size of the removal function and its corresponding figuring capabilities. A larger spot size for the removal function leads to higher processing efficiency but lower figuring ability. Conversely, a smaller spot size results in higher figuring ability but lower efficiency. Adjusting the spot size of the removal function using tools with an aperture is a possible approach. However, existing variable-aperture tools have certain limitations in IBF processing. To leverage the advantages of both large and small spot sizes for the removal function during IBF processing, an in situ dynamic beam variable-aperture device has been designed. This device optimizes the parameters of diaphragm sheets and employs FOC for dynamic aperture adjustment. Simulations show that 12 numbers of 0.1 mm-thick sheets minimize removal function distortion, with the thermal strain-induced area variation being <5%. FOC enables rapid (≤0.45 s full range) and precise aperture control. Experiments confirm adjustable spot sizes (FWHM 0.7–17.2 mm) with Gaussian distribution (correlation >96.7%), operational parameter stability (relative change rate ≤5%), and high repeatable positioning precision (relative change rate ≤3.2% in repeated adjustments). The design enhances IBF efficiency, flexibility, and accuracy by enabling in situ spot size optimization, overcoming conventional limitations. Full article

To obtain a flat top shaped passband in a conventional thin-film-based optical bandpass filter (OBF), it needs a large number of constitutional layers of thin films, which makes the film deposition systems more complicated and accumulates errors in film growth. A flat top and polarization-independent optical bandpass filter structure is proposed based on experimentally verified polarization independency in the form of a prism-pair coupled planar optical waveguide (POW). The POW is composed of two waveguide stacks, which consists of nine planar thin-film layers. Theoretical simulations show that the flat band top spans about 5 nm with transmittance over 97.8%. The passband is designed to be centered at 632.8 nm, the He-Ne laser wavelength, and the FWHM (full width at half maximum) bandwidth is about 35 nm. Within 0.5° tuning for the incident angle of the light, the passband could be shifted within 50 nm, while its transmittance fluctuates only less than 1% and the passband shape distorts only slightly. This type of OBF is potentially applicable in various fields of optical and laser spectroscopies. Full article

In this study, a terahertz microfluidic multi-band sensor was designed. Unlike previous microfluidic absorption sensors that rely on dipole resonance, the proposed sensor uses a physical mechanism for absorption by exciting higher-order lattice resonances in microfluidic structures. With a Fabry–Perot cavity, the sensor can form an absorption peak with a high quality factor (Q) and narrow full width at half maximum (FWHM). A high Q value and a narrow FWHM are valuable in the field of sensing and provide strong support for high-precision sensing. On this basis, the sensing performance of the device was investigated. The simulation results clearly show that the absorption sensor has ultra-high sensitivity, which reaches 400 GHz/Refractive Index Unit (RIU). In addition, the sensor generates three absorption peaks, overcoming the limitations of a single frequency band in a composite resonance mode and multidimensional frequency response, which has potential application value in the field of volatile organic compound (VOC) sensing. Full article

Quantitative FDG-PET brain imaging across multiple centers is challenged by inter-scanner variability, impacting the comparability of neuroimaging data. This study proposes a data-driven image-based harmonization protocol to address these discrepancies without relying on traditional phantom scans. The protocol uses spatially normalized FDG-PET brain images to estimate scanner-specific Gaussian smoothing filters, optimizing parameters via the structural similarity index (SSIM). Validation was performed using images from cognitively normal individuals and Alzheimer’s disease patients from the Alzheimer’s Disease Neuroimaging Initiative (ADNI) database. Results demonstrated robust harmonization at moderate target resolutions (8 and 10 mm FWHM), with filter estimates consistently within 1.2 mm of phantom-derived ground truths. However, at higher resolutions (6 mm FWHM), discrepancies reached up to 3 mm, reflecting reduced accuracy. These deviations were particularly evident for high-resolution scanners like HRRT, likely due to elevated noise levels and smaller sample sizes. The presented harmonization method effectively reduces inter-scanner variability in retrospective FDG-PET studies, especially valuable when phantom scans are unavailable. Nonetheless, the current limitations at finer resolutions underline the necessity for methodological refinements to meet the demands of evolving high-resolution PET imaging technologies. Full article

This paper investigates the effect of plasticity ball burnishing on characteristics of surface integrity, residual stress and hardness of laser direct energy deposited (DEDed) Stellite 21 alloys, with a focus on the burnishing directional effect on surface and microstructural deformation. The results demonstrated that the burnishing improved surface finish, reducing Sa and Sz by 24% and 47%, respectively. The burnishing flattened and modified the cellular/columnar grains at a depth of 50 µm, with the most notable changes observed on the cross-sectional plane normal to the burnishing direction. Compared to the ground surface, the burnishing introduced higher and deeper compressive stresses along normal to the burnishing/grinding direction (−1341 MPa and 61 µm) as compared to that along the burnishing direction (−449 MPa and 56 µm). Likewise, the burnishing increased the full width at half maximum (FWHM) in the same fashion by broadening XRD peaks along normal to the burnishing direction. Due to higher grain modification and dislocation density, the burnishing has improved microhardness at a depth of 320 µm by 26% along normal to the burnishing direction. These findings demonstrate that the plasticity ball burnishing has a directional effect on plastic deformation and can be considered a plausible technique for tailored surface integrity, residual stress and hardness, which potentially improve the service performance of DEDed Stellite 21 alloy components. Full article

The precise control of thermal–kinetic parameters governs epitaxial perfection in functional oxide heterostructures. Herein, using Iridium/MgO(100) as a model system, the traditional “low-speed/high-temperature” paradigm is revolutionized through the combination of ab initio calculations, multiscale simulations, and subsequent deposition experiments. First-principles modeling reveals the mechanisms of Volmer–Weber (VW, island growth mode) nucleation at low coverage and Stranski–Krastanov (SK, layer-plus-island growth) transitions driven by interface metallization, stress release, and energy reduction, which facilitates coherent monolayer formation by lowering the energy barrier by ~34%. Molecular dynamics simulations demonstrate that the strategic co-optimization of substrate temperature (T_sub) and deposition rate (V_dep) induces an abrupt cliff-like drop in mosaic spread. Experimental validations confirm that this T-V synergy achieves unprecedented interfacial coherence, whereby AFM roughness reaches 0.34 nm (RMS) and the XRC-FWHM of 0.13° approaches single-crystal benchmarks. Notably, our novel “accelerated heteroepitaxy” protocol reduces growth time without compromising quality, addressing the efficiency–quality paradox in industrial-scale diamond substrate fabrication. These findings establish universal thermal–kinetic design principles applicable to refractory metal/oxide heterostructures for next-generation quantum sensors and high-power electronic devices. Full article

This work presents a novel $C{O}_2$ gas sensor based on a slotted polymer-phaseshift Bragg grating (SP-PSBG) waveguide filled with polyhexamethylene biguanide (PHMB) as the sensing medium. The transmission resonance, characterized by a narrow peak with a full width at half maximum (FWHM) of 1.6 nm within the Bragg grating bandgap, is highly responsive to refractive index changes in PHMB caused by variations in $C{O}_2$ concentration. Numerical simulations demonstrate a sensitivity of 14.4 pm/ppm, outperforming conventional gas sensors based on functional material coatings. This enhanced performance comes from the direct interaction between the PHMB-filled resonant structure and the cladding that contains $C{O}_2$ molecules, eliminating the need for polymer-coated cladding layers. The optimization approach employed in this design focuses on maximizing the optical confinement factor within the PHMB-filled slot, leading to an effective overlap between the guided optical mode and the sensing material. Full article

Structural microheterogeneity arising from the cooperative nature of hydrogen bonding is a critical yet often overlooked factor in the mechanistic understanding of physicochemical and biological processes occurring in aqueous environments. MD simulations using a potential that accounts for molecular flexibility and directional interactions revealed inhomogeneity arising from patches of continuously connected, four-bonded molecules embedded within a less ordered, space-filling hydrogen-bond network. The size of these patches follows a statistical distribution that is strongly temperature-dependent. With increasing temperature, the average size of the patches decreases, whereas the contribution of molecules forming the inter-patch zones becomes more pronounced. The nature of microheterogeneity is evidenced by temperature-dependent changes in the asymmetry of calculated power spectra as well as in the measured IR absorption within the stretching, bending, and combination band regions. A novel method for band analysis incorporates the calculation of skewness and a mirroring procedure for more accurate determination of FWHM of asymmetric bands. Discontinuities in the temperature dependence of spectral parameters observed within the 5–80 °C range correspond to the thermodynamic anomalies of liquid water. We show that structural microheterogeneity persists near 100 °C, suggesting that aqueous processes are better described by statistical distributions than by uniform models. Molecular simulations and IR spectroscopy offer key insights into these distributions. Full article

This study presents a comprehensive dosimetric characterization and commissioning of a grid-type collimator manufactured via 3D printing using PLA-W composite filament, following an international protocol for small-field dosimetry. PLA doped with high concentrations of tungsten (>90% w/w) enables the fabrication of miniaturized collimators (<1 cm) with complex geometries, suitable for non-conventional radiotherapy applications. However, accurate assessment of spatial dose modulation is challenged by penumbra overlap between closely spaced beamlets, limiting the application of conventional instrumentation and protocols. To address this, absolute and relative dose distributions were evaluated for various radiation field configurations (number of beamlets) in both lateral and depth directions. Measurements were performed according to the IAEA TRS-483 protocol, using micro-ionization chambers and diode detectors. Additionally, long-term stability assessments were carried out to evaluate both the structural integrity and modulation performance of the printed grid over time. Point dose measurements using the same detectors were repeated after one year, and 2D surface dose distributions measured with EBT3 films were compared to SRS MapCHECK measurements two years later. The generated radiation field size of the central beamlet (FWHM) differed by less than 0.2% (15.8 mm) from the physical projection size (15.6 mm) and the lateral transmission due simultaneous beamlets resulted in FWHM variations of less than 3.8%, confirming manufacturing precision and collimator capability. Output factor measurements increased with the number of beamlets, from 0.75 for a single beamlet to 0.82 for the full beamlets configuration. No significant changes were observed in the depth of maximum dose across the different beamlets configurations (1.20 ± 0.20 cm). On the other hand, the long-term evaluations show no relevant changes in the FWHM or VPR, confirming the performance and reliability of the system. These results support the clinical feasibility and lasting performance stability of in-house manufactured grid collimators using PLA-W filaments and accessible 3D printing technology. Full article

The degenerate optical parametric oscillator (OPO) is demonstrated to generate high-power, broadband mid-infrared MgO-doped periodically poled lithium niobate (MgO:PPLN) femtosecond laser at 151 MHz, synchronously pumped by a commercial Kerr-lens mode-locked Yb:KGW oscillator at 1028 nm. The average power of the degenerate OPO centered at 2056 nm is as high as 740 mW, which is the highest output power from a reported 2 μm degenerate femtosecond OPO, pumped by a bulk solid-state laser. The full width at half maximum (FWHM) spectral bandwidth of the degenerate OPO is 87.4 nm, corresponding to a theoretical, Fourier-limited pulse duration of 51 fs. These remarkable results indicate that degenerate OPO is a great potential candidate technology for generating high-power and few-cycle femtosecond pulses around 2 μm. Such mid-infrared sources are well-suited for high harmonic generation, a pumping source for mid- to far-infrared OPO. Full article

Scintillators are important for a wide range of applications in detection and imaging. In this paper, the growth and performance results of advanced large-diameter thallium-based ternary halide crystals are presented. Intrinsic crystals of TlMgCl₃, TlCaCl₃, and other small-diameter TlCaBr₃, and TlCa(Cl,Br)₃, as well as europium-doped TlCa₂Br₅, TlCa(Cl,Br)₃, and TlSr₂I₅ are melt-grown by the Bridgman method. These compounds have a high effective atomic number (Z_eff) and physical densities due to thallium. The best crystal quality and energy resolution (FWHM) at 662 keV are observed for TlMgCl₃, TlCaCl₃, and TlSr₂I₅:Eu at 3.8%, 4.6%, and 3.5%, respectively. The primary decay constants for these compounds are in the range of 0.45 to 0.63 μs. These ternary Tl-halide compounds have proportional or linear response (±0.05%) to γ-rays above 40 keV. Full article

This study is a comprehensive experimental and computational investigation into high-resolution laser beam diagnostics, combining classical statistical techniques, numerical image processing, and machine learning-based predictive modeling. A dataset of 50 sequential beam profile images was collected from a femtosecond fiber laser operating at a central wavelength of 780 nm with a pulse duration of approximately 125 fs. These images were analyzed to extract spatial and temporal beam characteristics, including centroid displacement, Full Width at Half Maximum (FWHM), ellipticity ratio, and an asymmetry index. All parameters were derived using intensity-weighted algorithms and directional cross-sectional analysis to ensure accurate and consistent quantification of the beam’s dynamic behavior. Linear regression models were applied to horizontal and vertical intensity distributions to assess long-term beam stability. The resulting predictive trends revealed a systematic drift in beam centroid position, most notably along the vertical axis, and a gradual broadening of the horizontal FWHM. The modeling further showed that vertical intensity increased over time while horizontal intensity displayed a slight decline, reinforcing the presence of axis-specific fluctuations. These effects are attributed to minor optical misalignments or thermally induced variations in the beam path. By integrating deterministic analysis with data-driven forecasting, this methodology offers a robust framework for real-time beam quality evaluation. It enhances sensitivity to subtle distortions and supports the future development of automated, self-correcting laser systems. The results underscore the critical role of continuous, high-resolution monitoring in maintaining beam stability and alignment precision in femtosecond laser applications. Full article

Methylammonium chloride (MACl) in perovskite solar cells (PSCs) is a key additive known to enhance film quality in dimethyl sulfoxide (DMSO)-based systems, where an optimal concentration of 50 mol% is typically required. However, alternative solvent systems, such as N-methyl-2-pyrrolidone (NMP), have shown potential to reduce additive concentrations while maintaining high performance. This study explored the NMP/DMF (1:9) solvent system and its impact on MACl optimization. The optimal concentration of MACl in NMP-based systems was reduced to 20–30 mol%, representing a substantial decrease from the 50 mol% typically required in DMSO-based formulations. Films produced under these conditions exhibited superior crystallinity, as evidenced by narrower full-width at half maximum (FWHM) values in X-ray diffraction (XRD), and reduced defect densities. These structural improvements translated into enhanced optoelectronic properties, with devices achieving efficiency exceeding 23%, compared with ~20% for DMSO-based counterparts. Furthermore, the NMP-based system demonstrated improved long-term stability under continuous illumination. Full article

A comprehensive X-ray topography analysis of two selected aluminum nitride (AlN) bulk crystals is presented. We compare surface inspection X-ray topography in back-reflection geometry with high-energy transmission topography in the Lang and Laue configuration using the monochromatic K_α1 excitation wavelength of copper, silver, and tungsten, respectively. A detailed comparison of the results allows the assessment of both the high- and low-energy X-ray topography methods with respect to performance and structural information, giving essential feedback for crystal growth. This is demonstrated for two selected AlN freestanding faceted crystals up to 8 mm in thickness grown in all directions using the physical vapor transport (PVT) method. Structural defects of all facets of the crystals are determined using the X-ray topography in back-reflection geometry. The mean threading dislocation densities are 480 ± 30 cm⁻² for both crystals of either the Al- or N-face. Clustering of dislocations could be observed. The m-facets show the presence of basal plane dislocations and their accumulation as clusters. The integral transmission topographs of the $10\overline{1}0$ (m-plane) reflection family show that basal plane dislocations of the screw type in ${\displaystyle \frac{1}{3}}⟨\overline{1}2\overline{1}0⟩$ directions decorate threading dislocation clusters. Three-dimensional section transmission topography reveals that the basal plane dislocation clusters mainly originate at the seed boundary and propagate in the ${\displaystyle \frac{1}{3}}⟨\overline{1}2\overline{1}0⟩$ direction along the growth front. In newly laterally grown material, the Borrmann effect has been observed for the first time in PVT-grown bulk AlN, indicating very high structural perfection of the crystalline material in this region. This agrees with a low mean FWHM of 10.6 arcsec of the $10\overline{1}0$ reflection determined through focused high-energy Laue transmission mappings. The latter method also opens the analysis of the $∆2\theta$-shift correlated to the residual stress distribution inside the bulk crystal, which is dominated by dislocation clusters. Contrary to Lang transmission topography, the de-focused high-energy Laue transmission penetrates the 8 mm-thick crystal enabling a defect analysis in the bulk. Full article

Two innovative dimeric derivatives of indolo[3,2,1-jk]carbazole (ICz), named 7,7′-biindolo[3,2,1-jk]carbazole (ICzDO) and 4,4′-biindolo[3,2,1-jk]carbazole (ICzDM), have been developed. Both dimers consist of two ICz units coupled through distinct ortho and meta positions. In the solution state, ICzDO and ICzDM exhibited photoluminescence (PL) maxima at 379 nm and 391 nm, demonstrating emission in the deep-blue region. These compounds show exceptionally narrow emission spectra, characterized by full width at half maximum (FWHM) of 28 nm for ICzDO and 26 nm for ICzDM. In the film state, ICzDM exhibited a photoluminescence (PL) maximum at 428 nm, whereas ICzDO showed a red-shifted emission at 507 nm with a broad full width at half maximum (FWHM) of 87 nm, indicating significant red-shifted excimer emission characteristics. This is attributed to its aggregation-enhanced excimer emission (AEEE) characteristics. When used as host materials for red phosphorescent OLEDs, both compounds enabled efficient energy transfer. Devices using ICzDM as the host attained highly efficient external quantum efficiency (EQE) values of 13.5%, coupled with remarkable color purity represented by Commission Internationale de l’Éclairage (CIE) coordinates of (0.685, 0.314). These findings emphasize how strategic variations in linking positions of identical chromophores can markedly enhance OLED device performance, paving the way for innovative material designs in next-generation organic semiconductor technologies. Full article