Search Results (425)

Helminth parasites of wild animals represent a major threat to the health of these animals, leading to significant losses in performance, health, and zoonotic implications. In some zoos, anthelmintics have traditionally been used to control these parasites, many of which are also zoonotic. Other actions, such as the removal of organic waste, have also been adopted. Few or no control measures are applied to free-ranging wild animals. Helminthophagous fungi are a promising biological alternative. When animals ingest fungal spores, they are excreted in their feces, where they trap and destroy helminth larvae and eggs, preventing and reducing the parasite load in the environment. Another alternative is to administer fungi by spraying them directly into the environment. This review aims to examine the use of helminthophagous fungi in the control of helminthiases in wild animals, highlighting their potential to minimize dependence on chemical treatments and promote sustainable animal breeding and production. There are many challenges to making this viable, such as environmental variability, stability of formulations, and acceptance of this new technology. These fungi have been shown to reduce parasite burdens in wild animals by up to 75% and can be administered through the animals’ feeding troughs. To date, evidence shows that helminthophagous fungi can reliably curb environmental parasite loads for extended periods, offering a sustainable alternative to repeated anthelmintic dosing. Their use has been linked to tangible gains in body condition, weight, and overall welfare in various captive and free-ranging wildlife species. Full article

Difficult, extreme operating conditions of parabolic antennas under precipitation and sub-zero temperatures require the creation of effective heating systems. The purpose of the research is to develop a multilayer coating containing two metal-ceramic layers, epoxy composite layers, carbon fabric, and an outer layer of basalt fabric, which allows for effective heating of the antenna, and to study the properties of this coating. The multilayer coating was formed on an aluminum base that was subjected to abrasive jet processing. The first and second metal-ceramic layers, Al₂O₃ + 5% Al, which were applied by high-speed multi-chamber cumulative detonation spraying (CDS), respectively, provide maximum adhesion strength to the aluminum base and high adhesion strength to the third layer of the epoxy composite containing Al₂O₃. On this not-yet-polymerized layer of epoxy composite containing Al₂O₃, a layer of carbon fabric (impregnated with epoxy resin) was formed, which serves as a resistive heating element. On top of this carbon fabric, a layer of epoxy composite containing Cr₂O₃ and SiO₂ was applied. Next, basalt fabric was applied to this still-not-yet-polymerized layer. Then, the resulting layered coating was compacted and dried. To study this multilayer coating, X-ray analysis, light and raster scanning microscopy, and transmission electron microscopy were used. The thickness of the coating layers and microhardness were measured on transverse microsections. The adhesion strength of the metal-ceramic coating layers to the aluminum base was determined by both bending testing and peeling using the adhesive method. It was established that CDS provides the formation of metal-ceramic layers with a maximum fraction of lamellae and a microhardness of 7900–10,520 MPa. In these metal-ceramic layers, a dispersed subgrain structure, a uniform distribution of nanoparticles, and a gradient-free level of dislocation density are observed. Such a structure prevents the formation of local concentrators of internal stresses, thereby increasing the level of dispersion and substructural strengthening of the metal-ceramic layers’ material. The formation of materials with a nanostructure increases their strength and crack resistance. The effectiveness of using aluminum, chromium, and silicon oxides as nanofillers in epoxy composite layers was demonstrated. The presence of structures near the surface of these nanofillers, which differ from the properties of the epoxy matrix in the coating, was established. Such zones, specifically the outer surface layers (OSL), significantly affect the properties of the epoxy composite. The results of industrial tests showed the high performance of the multilayer coating during antenna heating. Full article

The scalability and processability of high-performance membranes remain significant challenges in membrane technology. This work focuses on optimizing the pilot-scale production of patterned polysulfone (PSf) ultrafiltration membranes using the spray-modified non-solvent-induced phase separation (s-NIPS) method on a roll-to-roll pilot line. s-NIPS has already been studied extensively at lab-scale to prepare patterned membranes for various applications including membrane bioreactors (MBR), reverse osmosis (RO) and forward osmosis (FO). Although studied at the lab scale, membranes prepared at a larger scale can significantly differ in performance; therefore, phase inversion parameters, including polymer concentration, molecular weight, and additive type (i.e., polyethylene glycol (PEG) or polyvinylpyrolidine (PVP)) and concentration, were systematically varied when casting on a roll-to-roll, 12″ wide pilot line to identify optimal conditions for achieving defect-free, high-performance, patterned PSf membranes. The membranes were characterized for their pure water permeance, BSA rejection, casting solution viscosities, and resulting morphology. s-NIPS patterned membranes exhibit 150–350% increase in water flux as compared to their reference flat membrane, thanks to very high pattern heights up to 825 µm and formation of finger-like macrovoids. This work bridges the gap between lab-scale and pilot-scale membrane preparation, while proposing an upscaled membrane with great potential for use in water treatment. Full article

In wet flue gas desulfurization and denitrification processes, nitrite accumulation inhibits denitrification efficiency and induces secondary pollution due to its acidic disproportionation. This study developed a Mn-modified ZSM-5 zeolite catalyst, achieving efficient resource conversion of nitrite in nitrogen-containing wastewater through an O₃ + Mn/ZSM-5 catalytic system. Mn/ZSM-5 catalysts with varying SiO₂/Al₂O₃ ratios (prepared by wet impregnation) were characterized by BET, XRD, and XPS. Experimental results demonstrated that Mn/ZSM-5 (SiO₂/Al₂O₃ = 400) exhibited a larger specific surface area, enhanced adsorption capacity, abundant surface Mn³⁺/Mn⁴⁺ species, hydroxyl oxygen species, and chemisorbed oxygen, leading to superior oxidation capability and catalytic activity. Under the optimized conditions of reaction temperature = 40 °C, initial pH = 4, Mn/ZSM-5 dosage = 1 g/L, and O₃ concentration = 100 ppm, the $\mathrm{N}{\mathrm{O}}_2^{-}$ oxidation efficiency reached 94.33%. Repeated tests confirmed that the Mn/ZSM-5 catalyst exhibited excellent stability and wide operational adaptability. The synergistic effect between Mn species and the zeolite support significantly improved ozone utilization efficiency. The O₃ + Mn/ZSM-5 system required less ozone while maintaining high oxidation efficiency, demonstrating better cost-effectiveness. Mechanism studies revealed that the conversion pathway of $\mathrm{N}{\mathrm{O}}_2^{-}$ followed a dual-path catalytic mechanism combining direct ozonation and free radical chain reactions. Practical spray tests confirmed that coupling the Mn/ZSM-5 system with ozone oxidation flue gas denitrification achieved over 95% removal of liquid-phase $\mathrm{N}{\mathrm{O}}_2^{-}$ byproducts without compromising the synergistic removal efficiency of NO_x/SO₂. This study provided an efficient catalytic solution for industrial wastewater treatment and the resource utilization of flue gas denitrification byproducts. Full article

Wheat powdery mildew is a major fungal disease threatening global wheat production. To develop an effective and environmentally friendly control strategy, this study systematically evaluated the disease-suppressive efficacy of strong oxidative free radicals across a series of treatment parameters, including radical concentrations (3.0–8.0 mg/L), spraying durations (20–60 s), solution pH levels (5–8), spraying heights (0–20 cm), and treatment timings corresponding to different infection stages (0–120 h post-inoculation). Response surface methodology (RSM) was used to optimize these variables with the objective of maximizing disease control efficacy. The results showed that control efficacy increased with radical concentration up to 5.0 mg/L, beyond which a saturation effect was observed. The most effective conditions included a spraying duration of 50 s and a height of 6.5 cm. Maximum suppression was achieved when the treatment was applied within 0–12 h post-infection. Moreover, adjusting the solution pH to a range of 5–7 further enhanced the efficacy. The RSM-based predictive model demonstrated high accuracy (R² = 0.9942), and the optimized parameters—6.65 mg/L radical concentration, 50.84 s spraying duration, and treatment at 15.67 h post-infection—yielded a predicted control efficacy of 97.64%, with a validation error below 0.5%. This study provides a quantitative basis for the precise and sustainable deployment of free radical-based treatments in wheat disease management. Full article

Chronic lung infection is the main predictor of morbidity and mortality in cystic fibrosis (CF), and current pharmacological alternatives are ineffective against Pseudomonas aeruginosa infections. We developed ciprofloxacin (CIP) for inhalation, aiming at improving its solubility through the formation of an amorphous solid dispersion (ASD) using gelatin (GA). CIP and GA were dissolved in varying ratios and then spray-dried, obtaining CIP-GA microspheres in a single step. The dissolution rate, size distribution, morphology, and aerodynamic properties of CIP-GA microspheres were studied, as well as their antimicrobial activity on P. aeruginosa biofilms. Microspheres formulated with a higher GA ratio increased the dissolution of CIP ten-fold at 6 h compared to gelatin-free CIP. Formulations with 75% GA or more could form ASDs and improve CIP’s dissolution rate. CIP-GA microspheres outperformed CIP in eradicating P. aeruginosa biofilm at 24 h. The spray-drying process produced CIP-GA microspheres with good aerodynamic properties, as indicated by a fine particle fraction (FPF) of 67%, a D₅₀ of 3.52 μm, and encapsulation efficiencies above 70%. Overall, this study demonstrates the potential of gelatin to enhance the solubility of poorly soluble drugs by forming ASDs. As an FDA-approved excipient for lung delivery, these findings are valuable for particle engineering and facilitating the rapid translation of technologies to the market. Full article

A study was conducted to examine the effects of the spray application of nine antifungal products, including microbial-derived fungicides, plant-derived fungicides, and chemical fungicides, on the grass Achnatherum inebrians that was either host to Epichloë gansuensis (E+) or E. gansuensis-free (E−) and that was exposed to Blumeria graminis, the fungal pathogen causing powdery mildew. The Epichloë endophyte is a seed-borne mutualistic biotrophic fungus whose growth is fully synchronized with the host grass. Bl. graminis is a biotrophic pathogen that continually infects leaves and stems via conidia, the formation of appressoria, leading to the presence of haustoria in epidermal cells. Prior to fungicide application, the presence of endophytes significantly increased the resistance of A. inebrians to powdery mildew and was able to increase the chlorophyll content. However, the positive effects of the Epichloë endophyte on the plant were suppressed with the use of some fungicides and the increase in the number of sprays, but the reciprocal relationship between the Epichloë endophyte and the plant was not significantly disrupted. Full article

Globally, the proportion of the consumption of fruits in the human diet shows an increasing trend. However, fruits may incur significant losses during the post-harvest storage and transportation process due to metabolic activities and mechanical damage. Post-harvest coating technology has been proven to be an effective means of reducing quality loss, and it offers the advantages of being environmentally friendly, energy-efficient, and free of chemical residues. This article begins with an introduction to the three main mechanisms of coating preservation, including physical barrier effects, physiological metabolism regulation, and antibacterial and antioxidant effects. Secondly, this paper comprehensively reviews the latest progress of coating application technology in the field of fruit preservation, and summarizes the development of coating application technology in recent years, which is divided into two categories: traditional technology and fiber coating formation technology. Among these, the spraying method in traditional technology and microfluidic spinning technology in fiber coating formation technology are emphasized. This information will help to further develop coating application techniques to improve post-harvest fruit preservation. Full article

This paper proposes a cluster-based flight path construction method for automated drone-assisted pear pollination systems in orchard environments. The approach uses RGB-D (Red-Green-Blue-Depth) sensing through an observation drone equipped with RGB and depth cameras to detect blooming pear flowers. Flower detection is performed using a YOLO (You Only Look Once)-based object detection algorithm, and three-dimensional flower positions are estimated by integrating depth information with the drone’s positional and orientation data in the east-north-up coordinate system. To enhance pollination efficiency, the method applies the OPTICS (Ordering Points To Identify the Clustering Structure) algorithm to group detected flowers based on spatial proximity that correspond to branch-level distributions. The cluster centroids then construct a collision-free flight path, with offset vectors ensuring safe navigation and appropriate nozzle orientation for effective pollen spraying. Field experiments conducted using RTK-GNSS-based flight control confirmed the accuracy and stability of generated flight trajectories. The drone hovered in front of each flower cluster and performed uniform spraying along the planned path. The method achieved a fruit set rate of 62.1%, exceeding natural pollination at 53.6% and compared to the 61.9% of manual pollination. These results demonstrate the effectiveness and practicability of the method for real-world deployment in pear orchards. Full article

The plant microbiome plays a crucial role in the health of the tea plant, while Bacillus thuringiensis (Bt) is widely utilized as a biological pesticide in tea gardens, promoting sustainable agricultural practices. However, the effects of Bt spraying on tea quality and the structure and function of the phyllosphere microbiome remain unclear. This study evaluated the effects of Bt spraying on tea quality, microbiome composition, diversity, and potential functions using tea leaf quality measurements and high-throughput sequencing of the 16S/ITS rDNA genes. Results showed that spraying Bt1 significantly increased the contents of free amino acids (by 15.27%), flavonoids (by 18.00%), soluble sugars (by 62.55%), and key compounds such as epicatechin gallate (by 10.50%), gallocatechin gallate (by 122.52%), and epigallocatechin gallate (by 61.29%), leading to improved leaf quality. Co-occurrence network analysis indicated that the community structure of both epiphytic and endophytic microbes became more complex after Bt treatment. The abundance of beneficial bacteria, such as Novosphingobium, Methylobacterium, and Sphingomonas, increased significantly, while pathogenic fungi like Aspergillus and Phyllosticta decreased. Functional prediction indicated enhanced amino acid metabolism, secondary metabolism, and carbohydrate metabolism, particularly the biosynthesis of flavonoids, which supports disease resistance and boosts secondary metabolite levels. Furthermore, Bt application reduced pathogenic fungi, enhancing the tea plant’s resistance to diseases. Overall, foliar spraying of Bt can positively alter the phyllosphere microbiome by enriching beneficial bacteria and improving metabolic functions, ultimately enhancing tea plant resistance and quality, and providing a scientific basis for sustainable pest management in tea cultivation. Full article

Proton exchange membrane fuel cells (PEMFCs) have the advantages of high efficiency, a low operating temperature, and a pollution-free reaction. Therefore, PEMFCs have emerged as a viable clean energy solution for ships to reduce their carbon emissions. When PEMFCs operate in marine salt spray environments, foreign ions entering the cathodes of fuel cells with air can cause a decline in cell performance. In this study, the effects of the cation type (K⁺, Na⁺, Mg²⁺, and Ca²⁺) and concentration (0.25 M and 0.5 M) on cell performance in terms of the polarization curve were systematically investigated using a fuel cell test system. Cell performance degradation was observed due to the existence of cations. The influence of the four cations on cell performance followed the rule of Ca²⁺ > Mg²⁺ > Na⁺ > K⁺. Meanwhile, cell performance decreased with an increase in concentration. When the fuel cell was not contaminated, the voltage was 0.645 V at a current density of 1 A/cm². When the concentration was 0.5 M, the corresponding voltages were 0.594 V, 0.583 V, 0.559 V, and 0.300 V, respectively. In addition, fuel cells contaminated by NaNO₃ and NaCl were compared. Due to the existence of Cl⁻, more severe performance degradation was observed when the fuel cells were contaminated by NaCl. Full article

For the self-medication of nasal congestion following a common cold, decongestant nasal sprays can be recommended according to the medicine guidelines. In Germany, these are only available in community pharmacies (CPs) with free pricing. The aim was to analyze the medication recommendation, counseling, and pricing. A covert simulated patient study, internationally recognized as the “gold standard”, was conducted in all CPs of two medium-sized cities in north-eastern Germany. Each CP was visited twice (86 visits) with the identical scenario by one female and one male simulated patient. At the beginning, they asked for a nasal spray and, when asked, stated that they had had nasal congestion for three days. Slightly more than half (54.7%, 47/86) of the recommended nasal sprays were free of preservatives. The median counseling score was 2.0 out of 8 points, with a significantly higher score observed for the female SP (p = 0.004). Information on the maximum intake duration of five days recommended in the German pharmacy guideline was not provided during any visits. The prices varied in total from EUR 1.95 to EUR 6.22. Therefore, measures by the legislator and the chambers of pharmacists are necessary to sustainably improve the medication recommendation, the counseling, and the price transparency. Full article

To mitigate the serious environmental impact caused by the persistent accumulation of plastics, replacing conventional plastics with paper-based alternatives has emerged as a promising trend. In response to the environmental and health concerns associated with petrochemical-based plastic meal boxes and fluorinated water- and oil-repellent agents, this study proposes a sustainable, fluorine-free coating technology based on chitosan to enhance the water and oil resistance of molded-paper pulp meal boxes. By adjusting the degree of deacetylation and the solution concentration of chitosan, coated meal boxes were fabricated via a spraying method. The results demonstrate that coatings prepared with highly deacetylated (>95%) and concentrated (4% w/v) chitosan significantly improve barrier properties, achieving a water contact angle of 114.9° ± 3°, the highest oil-resistance rating (12/12) according to TAPPI standards, and stable resistance to 95 °C hot oil for up to 30 min without leakage. In addition, the coated samples exhibit enhanced mechanical strength (21.26 MPa) and excellent biodegradability. This work provides a cost-efficient and eco-friendly disposable food packaging solution, facilitating the sustainable substitution of petrochemical-based plastics. Full article

Studying the wettability of plant growth regulators on crop leaf surfaces is essential for enhancing crop yield. In this study, the wetting behavior of the plant growth regulator 28-homo-brassinolide (28-HB), supplemented with different surfactants, was investigated on the adaxial and abaxial surfaces of pepper leaves at the seedling, early flowering, and fruiting stages. The microstructure of the leaf surface was characterized using an ultra-depth field microscope. The surface free energy (SFE) of the leaves was calculated using the Owens-Wendt-Rabel-Kaelble (OWRK) method. Additionally, the surface tension of the 28-HB solutions containing various surfactants, as well as the contact angles on pepper leaves at different growth stages, were measured. The experimental results indicate that the surface free energy (SFE) of pepper leaves significantly decreases with plant maturation. Specifically, the SFE of the adaxial leaf surface declined from 43.4 mJ/m² at the seedling stage to 26.6 mJ/m² at the fruiting stage, while the abaxial surface decreased from 27.5 mJ/m² to 22.5 mJ/m². At all growth stages, the relative polar component (R_P) of the adaxial surface was consistently higher than that of the abaxial surface and showed a gradual decline from 94.70% to 57.34% as development progressed. The contact angle measurement showed that the addition of surfactant decreased the contact angle of 28-HB on the leaf surface and increased the wetting area. Among the tested formulations, the addition of fatty alcohol ethoxylates (AEO-9) significantly reduced the contact angle to below 45°, and resulted in an adhesion tension below 30 mN/m and adhesion work lower than 105 mJ/m². These values indicate superior wetting performance compared to formulations containing sodium dodecyl sulfate (SDS) and cetyltrimethylammonium bromide (CTAB). This study integrates the surface free energy characteristics of pepper leaves at different growth stages with the wetting performance of various surfactant systems, providing a quantitative basis for the selection and optimization of surfactants in agricultural spray formulations. The findings offer theoretical support for precise pesticide application strategies, enhancing pesticide adhesion and absorption on leaf surfaces, thereby improving pesticide utilization efficiency throughout the crop growth cycle. Full article

The widespread phase-out of long-chain per- and poly-fluoroalkyl substances (PFASs) has created an urgent need for durable, fluorine-free water-repellent finishes that match the performance of legacy chemistries while minimising environmental impact. Here, the performance of an eco-friendly hybrid organic–inorganic treatment obtained by the in situ hydrolysis–condensation of triethoxy(octyl)silane (OS) in an amino-terminated polydimethylsiloxane (APT-PDMS) aqueous dispersion was investigated. The sol was applied to plain-weave cotton and polyester by a pad-dry-cure process and benchmarked against a commercial fluorinated finish. Morphology and chemistry were characterised by SEM–EDS, ATR-FTIR, and Raman spectroscopy; wettability was assessed by static contact angle, ISO 4920 spray ratings, and AATCC 193 water/alcohol repellence; and durability, handle, and breathability were evaluated through repeated laundering, bending stiffness, and water-vapour transmission rate measurements. The silica/PDMS coating formed a uniform, strongly adherent nanostructured layer conferring static contact angles of 130° on cotton and 145° on polyester. After five ISO 105-C10 wash cycles, the treated fabrics still displayed a spray rating of 5/5 and AATCC 193 grade 7, outperforming or equalling the fluorinated control, while causing ≤5% loss of water-vapour permeability and only a marginal increase in bending stiffness. These results demonstrate that the proposed one-step, water-borne sol–gel process affords a sustainable, industrially scalable route to high-performance, durable, water-repellent finishes for both natural and synthetic textiles, offering a viable alternative to PFAS-based chemistry for outdoor apparel and technical applications. Full article