Search Results (1,519)

Municipal wastewaters pose a severe risk to the environment and human health when discharged untreated. This is due to their high content of pathogens, such as viruses and bacteria, which can cause diseases like cholera. Herein, the research and development of porphyrin-modified polyethersulfone (PES) ultrafiltration (UF) membranes was conducted to improve bacterial inactivation in complex municipal wastewater and enhance the fouling resistance and filtration performance. The synthesis and fabrication of porphyrin nanofillers and the resultant membrane characteristics were studied. The incorporation of porphyrin-based nanofillers improved the membrane’s hydrophilicity, morphology, and flux (247 Lm⁻² h⁻¹), with the membrane contact angle (CA) decreasing from 90° to ranging between 58° and 50°. The membrane performance was monitored for its flux, antifouling properties, reusability potential, municipal wastewater, and humic acid. The modified membranes demonstrated an effective application in wastewater treatment, achieving notable antibacterial activity, particularly under light exposure. The In-BP@SW/PES membrane demonstrated effective antimicrobial photodynamic effects against both Gram-positive S. aureus and Gram-negative E. coli. It achieved at least a 3-log reduction in bacterial viability, meeting Food and Drug Administration (FDA) standards for efficient antimicrobial materials. Among the variants tested, membranes modified with In-PB@SW nanofillers exhibited superior antifouling properties with flux recovery ratios (FRRs) of 78.9% for the humic acid (HA) solution and 85% for the municipal wastewater (MWW), suggesting a strong potential for long-term filtration use. These results highlight the promise of porphyrin-functionalized membranes as multifunctional tools in advanced water treatment technologies. Full article

Cefepime-enmetazobactam is a novel β-lactam/β-lactamase inhibitor combination showing good activity against multidrug-resistant (MDR) Gram-negative bacteria producing a variety of β-lactamases. In this systematic review, we aimed to evaluate the available data on resistance to this drug. We performed a thorough search of four databases (Embase, PubMed, Scopus, and Web of Science), as well as backward citation searching, to identify studies containing data on resistance to cefepime-enmetazobactam. The data were extracted and analyzed according to the breakpoints established by the European Committee on Antimicrobial Susceptibility Testing (EUCAST) and the Food and Drug Administration (FDA), or the specific breakpoints reported by the authors of the respective studies. Analysis based on the type of lactamases produced by the isolates was also performed. Ten studies reported in vitro susceptibility testing and mechanisms of antimicrobial resistance. The total number of isolates was 15,408. The activity of cefepime-enmetazobactam against β-lactamase-producing isolates was variable. The resistance of the studied extended-spectrum β-lactamase (ESBL)-producing and ampicillin C β-lactamase (AmpC)-producing isolates was low (0–2.8% and 0%, respectively). The resistance was higher among oxacillinase-48 β-lactamase (OXA-48)-producing and Klebsiella pneumoniae carbapenemase (KPC)-producing isolates (3.4–13.2% and 36.7–57.8%, respectively). High resistance was noted among metallo-β-^lactamase (MBL)-producing isolates (reaching 87.5% in one study), especially those producing New Delhi metallo-β-lactamase (NDM) and Verona integron-encoded metallo-β-lactamase (VIM), which had the highest rates of resistance. The high activity of cefepime-enmetazobactam against Enterobacterales and selected lactose non-fermenting Gram-negative pathogens, including ESBL-producing and AmpC-producing isolates, makes it a potential carbapenem-sparing agent. The drug should be used after in vitro antimicrobial susceptibility testing in patients with infections caused by OXA-48, KPC, and MBL-producing isolates. Full article

Foodborne illness caused by bacterial pathogens is a global health concern and results in millions of infections annually. Therefore, food products typically undergo several processing stages, including sanitation steps, before being distributed in an attempt to remove pathogens. However, many sanitation methods have compounding effects on the color, texture, flavor, and nutritional quality of the product or do not effectively reduce the pathogens that food can be exposed to. Some bacterial pathogens particularly possess traits and tactics that make them even more difficult to mitigate such as biofilm formation. Non-thermal plasma sanitation techniques, including plasma-treated water (PTW), have proven to be promising methods that significantly reduce pathogenic bacteria that food is exposed to. Published work reveals that PTW can effectively mitigate both gram-positive and gram-negative bacterial biofilms. This study presents a novel analysis of the differences in antimicrobial effects of PTW treatment between biofilm-forming gram-positive bacteria, commonly associated with foodborne illness, that are sporulating (Bacillus cereus) and non-sporulating (Listeria monocytogenes). After treatment with PTW, the results suggest the following hypotheses: (1) that the non-sporulating species experiences less membrane damage but a greater reduction in metabolic activity, leading to a possible viable but non-culturable (VBNC) state, and (2) that the sporulating species undergoes spore formation, which may subsequently convert into vegetative cells over time. PTW treatment on gram-positive bacterial biofilms that persist in food processing environments proves to be effective in reducing the proliferating abilities of the bacteria. However, the variance in PTW’s effects on metabolic activity and cell vitality between sporulating and non-sporulating species suggest that other survival tactics might be induced. This analysis further informs the application of PTW in food processing as an effective sanitation method. Full article

Legumes are among the most important crops globally, serving as a major food source for protein and oil. In tropical regions, the cultivation of legumes has expanded significantly due to the increasing demand for food, plant-based products, and sustainable agriculture practices. However, tropical environments pose unique challenges, including high temperatures, erratic rainfall, soil infertility, and a high incidence of pests and diseases. Indeed, legumes are vulnerable to infections caused by bacteria, fungi, oomycetes, viruses, and nematodes. This review highlights the importance of legumes in tropical farming and discusses major diseases affecting productivity and their impact on the economy, environment, and lives of smallholder legume farmers. We emphasize the use of legume genetic resources and breeding, and biotechnology innovations to foster resistance and address the challenges posed by pathogens in legumes. However, an integrated approach that includes other cultivation techniques (e.g., crop rotation, rational fertilization, deep plowing) remains important for the prevention and control of diseases in legume crops. Finally, we highlight the contributions of plant genetic resources to smallholder resilience and food security. Full article

Honey bees are essential pollinators for the ecosystem and food crops. However, their health and survival face threats from both biotic and abiotic stresses. Fungi, microsporidia, and bacteria might significantly contribute to colony losses. Therefore, rapid and sensitive diagnostic tools are crucial for effective disease management. In this study, molecular assays were developed to quickly and efficiently detect the main honey bee pathogens: Nosema ceranae, Aspergillus flavus, Paenibacillus larvae, and Black queen cell virus. In this context, new primer pairs were designed for use in quantitative Real-time PCR (qPCR) reactions. Various protocols for extracting total nucleic acids from bee tissues were tested, indicating a CTAB-based protocol as the most efficient and cost-effective. Furthermore, excluding the head of the bee from the extraction, better results were obtained in terms of quantity and purity of extracted nucleic acids. These assays showed high specificity and sensitivity, detecting up to 250 fg of N. ceranae, 25 fg of P. larvae, and 2.5 pg of A. flavus DNA, and 5 pg of BQCV cDNA, without interference from bee DNA. These qPCR assays allowed pathogen detection within 3 h and at early stages of infection, supporting timely and efficient management interventions. Full article

Rapid screening of foodborne pathogens is critical for food safety, yet current detection techniques often suffer from low efficiency and complexity. In this study, we developed a sliding microfluidic colorimetric biosensor for the fast, sensitive, and multiplex detection of Salmonella. First, the target bacteria were specifically captured by antibody-functionalized magnetic nanoparticles in the microfluidic chip, forming magnetic bead–bacteria complexes. Then, through motor-assisted sliding of the chip, manganese dioxide (MnO₂) nanoflowers conjugated with secondary antibodies were introduced to bind the captured bacteria, generating a dual-antibody sandwich structure. Finally, a second sliding step brought the complexes into contact with a chromogenic substrate, where the MnO₂ nanoflowers catalyzed a colorimetric reaction, and the resulting signal was used to quantify the Salmonella concentration. Under optimized conditions, the biosensor achieved a detection limit of 10 CFU/mL within 20 min. In spiked pork samples, the average recovery rate of Salmonella ranged from 94.9% to 125.4%, with a coefficient of variation between 4.0% and 6.8%. By integrating mixing, separation, washing, catalysis, and detection into a single chip, this microfluidic biosensor offers a user-friendly, time-efficient, and highly sensitive platform, showing great potential for the on-site detection of foodborne pathogens. Full article

Foodborne pathogenic bacteria critically threaten public health and food industry sustainability, serving as a predominant trigger of food contamination incidents. To mitigate these risks, the development of rapid, sensitive, and highly specific detection technologies is essential for early warning and effective control of foodborne diseases. In recent years, biosensors have gained prominence as a cutting-edge tool for detecting foodborne pathogens, owing to their operational simplicity, rapid response, high sensitivity, and suitability for on-site applications. This review provides a comprehensive evaluation of critical biorecognition elements, such as antibodies, aptamers, nucleic acids, enzymes, cell receptors, molecularly imprinted polymers (MIPs), and bacteriophages. We highlight their design strategies, recent advancements, and pivotal contributions to improving detection specificity and sensitivity. Additionally, we systematically examine mainstream biosensor-based detection technologies, with a focus on three dominant types: electrochemical biosensors, optical biosensors, and piezoelectric biosensors. For each category, we analyze its fundamental principles, structural features, and practical applications in food safety monitoring. Finally, this review identifies future research priorities, including multiplex target detection, enhanced processing of complex samples, commercialization, and scalable deployment of biosensors. These advancements are expected to bridge the gap between laboratory research and real-world food safety surveillance, fostering more robust and practical solutions. Full article

Aptamers are single-stranded DNA or RNA oligonucleotides screened by systematic evolution of ligands by exponential enrichment (SELEX) methods, which are widely used in food analysis. Aptamers have the advantages of low molecular weight, ease of preparation, simplicity of chemical modification, and structural stability. Aptamers generated by SELEX are typically 80–100 bases in length, and the affinity of the aptamer can be improved by sequence optimization. Methods of aptamer optimization commonly include truncation, mutation, and chemical modification, and molecular docking, molecular dynamics, circular dichroism, and isothermal titration to assess often the binding performance of the aptamer to the target. Optimized aptamers usually enhance the affinity of the aptamer for the target and increase its sensitivity in the detection of pesticides, heavy metals, fungal toxins, pathogenic bacteria, and other objects. This paper focuses on truncation, mutation, chemical modification, the introduction of rare nucleotides, and computer-aided design. It provides an overview of non-immobilized optimization metrics. Full article

Xylanase is an essential industrial enzyme for degrading plant biomass, pulp and paper, textiles, bio-scouring, food, animal feed, biorefinery, chemicals, and pharmaceutical industries. Despite its significant industrial importance, the extensive application of xylanase is hampered by high production costs and concerns regarding the safety of xylanase-producing microorganisms. The utilisation of renewable polymers for enzyme production is becoming a cost-effective alternative. Among the prospective candidates, non-pathogenic lactic acid bacteria (LAB) are promising for safe and eco-friendly applications. Our investigation revealed that Pediococcus pentosaceus G4, isolated from plant sources, is a notable producer of extracellular xylanase. Improving the production of extracellular xylanase is crucial for viable industrial applications. Therefore, the current study investigated the impact of various medium components and optimised the selected medium composition for extracellular xylanase production of P. pentosaceus G4 using Plackett–Burman Design (PBD) and Central Composite Design (CCD) statistical approaches. According to BPD analysis, 8 out of the 19 investigated factors (glucose, almond shell, peanut shell, walnut shell, malt extract, xylan, urea, and magnesium sulphate) demonstrated significant positive effects on extracellular xylanase production of P. pentosaceus G4. Among them, glucose, almond shells, peanut shells, urea, and magnesium sulphate were identified as the main medium components that significantly (p < 0.05) influenced the production of extracellular xylanase of P. pentosaceus G4. The optimal concentrations of glucose, almond shells, peanut shells, urea, and magnesium sulphate, as determined via CCD, were 26.87 g/L, 16 g/L, 30 g/L, 2.85 g/L, and 0.10 g/L, respectively. The optimised concentrations resulted in extracellular xylanase activity of 2.765 U/mg, which was similar to the predicted extracellular xylanase activity of 2.737 U/mg. The CCD-optimised medium yielded a 3.13-fold enhancement in specific extracellular xylanase activity and a 7.99-fold decrease in production costs compared to the commercial de Man, Rogosa and Sharpe medium, implying that the CCD-optimised medium is a cost-effective medium for extracellular xylanase production of P. pentosaceus G4. Moreover, this study demonstrated a positive correlation between extracellular xylanase production, growth, lactic acid production and the amount of sugar utilised, implying the multifaceted interactions of the physiological variables affecting extracellular xylanase production in P. pentosaceus G4. In conclusion, statistical methods are effective in rapidly assessing and optimising the medium composition to enhance extracellular xylanase production of P. pentosaceus G4. Furthermore, the findings of this study highlighted the potential of using LAB as a cost-effective producer of extracellular xylanase enzymes using optimised renewable polymers, offering insights into the future use of LAB in producing hemicellulolytic enzymes. Full article

Mabroom dates (Phoenix dactylifera L.) are recognized as one of the most important crops in Qatar. Fresh fruit dates are susceptible to mould and post-harvest spoilage, resulting in a significant financial loss. Octanoic fatty acid (OFA) has been shown to regulate the growth of mould-causing organisms such as fungi and bacteria. It is known to have antibacterial properties. The objective of the current study was to evaluate the in vitro effect of OFA on the post-harvest pathogens of Mabroom fruits. Fresh, apparently healthy, and fully ripe Mabroom dates were obtained from the National Agriculture and Food Corporation (NAFCO). The chosen fruits were packed in sterile, well-ventilated plastic boxes and transported to the lab under controlled conditions. The fruits were distributed into five groups (G1 to G5). The groups G1, G2, and G3 received 1%, 2%, and 3.5% OFA, respectively, while G4 was left untreated and G5 was washed only with tap water as a positive control treatment. Each group contained 200 g of fresh and healthy semi-soft dates. The samples were then dried and incubated in a humidity chamber at 25 °C ± 2 for seven days. The signs and symptoms of decay were monitored and recorded. The presence of pathogens was confirmed via phenotypic and microscopic-based methods. The results showed a significant difference (p ≤ 0.05) among the groups. OFA at 3.5% had the strongest inhibitory action against post-harvest pathogens, followed by OFA2%. However, there were no differences (p ≤ 0.05) between OFA1% and the control groups. Aspergillus spp., Penicillium spp., Rhizopus spp., and Botrytis spp. were most abundant in the control group, followed by OFA2% and OFA1%, respectively. In conclusion, octanoic fatty acid at 3.5% may improve the quality of date fruits through its high antimicrobial activity, reduce the effect of post-harvest decay, minimize the loss of date fruits during storage, and improve the sustainability of date fruits. Further experiments are necessary to confirm the effectiveness of OFA as a green solution for sustainable date fruit production. Full article

The need for renewable and eco-friendly materials is driving the increasing demand for biobased polymers for food applications, with cellulose emerging as a promising option due to its degradability and environmental sustainability. Therefore, in the present study, a strategy to obtain cellulose-based materials with antimicrobial properties was explored by using a selected antimicrobial peptide named RKT1, which was stably and efficiently tethered to cellulose films via physical adsorption, harnessing the high number of functional groups on the polymeric surface. Firstly, the peptide, identified among the previous or new projected compounds, was structurally and functionally characterized, evidencing high conformational stability under a wide range of environmental conditions and efficient antibacterial activity against the foodborne pathogens Escherichia coli, Salmonella Typhimurium, and Listeria monocytogenes and the spoilage bacteria Enterococcus and Pseudomonas koreensis, all isolated from meat products. Moreover, in an extended application, the RKT1-activated cellulose films were tested in vivo on beef carpaccio. The results supported their effectiveness in increasing the shelf life of carpaccio by least two days without affecting its organoleptic properties. Therefore, RKT1, physically adsorbed on cellulose, still retains its activity, and the newly generated biopolymers show potential for use as a green food packaging material. Full article

With increasing popularity of food delivery services, the microbial safety of transported meals should be ensured. An effect of the type of a meal (cooked rice; mashed potatoes; mushroom sauce), inner primary packaging (sugarcane bagasse [SB] tray; polypropylene [PP] tray), secondary container (polyester/polyethylene foam/aluminum foil [PPA] bag; PP box) on the time interval of the internal hot ready-to-eat (RTE) meal temperature decrease to the value critical for Bacillus cereus growth (40 °C) was tested during a simulated delivery; in aliquot samples of the same meals, B. cereus growth was quantified presuming a natural contamination of the meals. Type of a meal had no effect on the tested time interval (p > 0.05). Packaging a meal in the PP tray as compared to the SB tray and inserting primary trays into the PP box instead of PPA bag delayed (p < 0.05) the internal meal temperature decrease by 50 and 15 min, respectively. Average B. cereus counts in the naturally contaminated meals after the four-hour culturing at 40 °C was 2.99 log CFU·g⁻¹. It was concluded that a hot RTE meal delivered up to four hours under the tested conditions is not likely to facilitate B. cereus growth above unacceptable levels. Full article

The role of Enterococcus spp. in food is debated since this group of lactic acid bacteria contains opportunistic pathogenic strains, some of which exhibit a multidrug-resistant profile. In livestock farms, the use of antibiotics is the most common practice to deal with mastitis-causing bacteria. However, the heavy usage and/or misuse of antibiotics has led to the emergence of antibiotic resistance. This study aimed to genetically and phenotypically characterize Enterococcus strains isolated from raw sheep milk. Samples were collected over one year from the bulk tank of a dairy sheep farm and cultured on selective media. Isolates were purified and analyzed by whole-genome sequencing and antimicrobial susceptibility testing. The isolates were divided into clusters and the corresponding species were identified along with their genes related to virulence and antibiotic resistance. The pan-, core- and accessory-genomes of the strains were determined. Finally, the antibiotic-resistant profile of selected strains was examined and associated with their genomic characterization. These findings contribute to a better understanding of Enterococci epidemiology, providing comprehensive profiles of their virulence and resistance genes. The presence of antibiotic-resistant bacteria in raw sheep milk destined for the production of cheese should raise awareness. Full article

Food safety plays an important and fundamental role, primarily for human health and certainly for the food industry. In this context, developing efficient, highly sensitive, safe, inexpensive, and fast analytical methods for determining chemical and biological contaminants, such as electrochemical (bio)sensors, is crucial. The development of innovative and high-performance electrochemical (bio)sensors can significantly support food chain monitoring. In this review, we have surveyed and analyzed the latest examples of electrochemical (bio)sensors for the analysis of some common biological contaminants, such as toxins and pathogenic bacteria and chemical contaminants, such as pesticides, and antibiotics. Full article

Fish production faces various challenges throughout its cycle, from rearing to consumption. Organic acids have emerged as an effective fish feed and meat treatment solution. They promote health and well-being, control pathogens, improve digestion, and contribute to food preservation. This study was therefore carried out to evaluate the evolution of publications on the use of organic acids in aquaculture over time, identifying the leading journals, authors, countries, and relevant organizations associated with the publications and determining the keywords most used in publications and research trends on this type of accommodation using bibliometric analysis. For this analysis, the Web of Science (WoS) and Scopus databases were used, with the keywords and Boolean operators “organic acid*” AND (“pathogens” OR “microorganism*” OR “bacteria” OR “fungi”) AND (“fish” OR “fry” OR “pisciculture”). Ninety-six articles were found in 44 journals, with the participation of 426 authors and 188 institutions, from 1995 to 2024. The most crucial publication source with the highest impact factor was the journal Aquaculture, with 14 articles, 2 of which were written by the most relevant author, Koh C., who received the highest number of citations and had the highest impact factor among the 426 authors. China had the most scientific production, with 26 publications on organic acids in aquaculture. However, Malaysia was the country that published the most cited documents, a total of 386. The most relevant affiliation was the University of Sains Malaysia, which participated in the publication of eight articles. The 10 most frequent keywords were fish, organic acids, citric acid, article, bacteria, growth, microorganisms, Oncorhynchus mykiss, animals, and digestibility. The results indicate increased publications on the benefits of using organic acids in aquaculture, highlighting their effectiveness as antibacterial agents and promoters of zootechnical development. However, gaps still require more in-depth research into the ideal dosages, mechanisms of action, and long-term impacts of these compounds. Full article