Search Results (11)

Permanent magnet synchronous motors (PMSMs) are widely favored by manufacturers for use in electric vehicles (EVs) because of their many benefits, which include high power density at high speeds, ruggedness, potential for high efficiency, and reduced control complexity. However, since the Back Electromotive Force (EMF) increases proportionally with the motor’s rotational speed, it must be carefully controlled at high speeds. Flux-weakening (FW) control is required to avoid excessive electromagnetic flux beyond the power source and inverter’s voltage restrictions. This paper aims to compare various FW control strategies and analyze their effectiveness in maximizing the speed of PMSMs in EV applications while ensuring stable and reliable performance. Various FW approaches, such as voltage-based control, current-based control, and advanced predictive control methods, are examined to determine how each method balances speed enhancement with torque output and efficiency. In addition, other control strategies are crucial for optimizing the performance of PMSMs in electric vehicles. Among the most popular methods for controlling torque and speed in PMSMs are Field-Oriented Control (FOC), Direct Torque Control (DTC), and Vector Current Control (VCC). Each control technique has advantages and is frequently cited in the literature as a crucial instrument for improving EV motor control. This article provides a comprehensive evaluation of FW methods, highlighting their respective advantages and disadvantages by synthesizing the findings of numerous studies. In addition to outlining future research directions in FW control for EV applications, this study provides essential insights and valuable suggestions to help select FW control techniques for various PMSM types and operating conditions. Full article

The use of interior permanent-magnet synchronous machines (IPMSMs) is prevalent in automotive and vehicle traction applications due to their high efficiency over a wide speed range. Given the high-power-density requirements of automotive IPMSMs, it is imperative to consider the effect of nonlinearities, such as saturation and cross-coupling, on the motor model. The aforementioned nonlinearities render conventional linear motor models incapable of accurately describing the operating characteristics of the IPMSM, including the maximum torque per ampere (MTPA) trajectory, the flux-weakening (FW) trajectory, and the maximum torque per volt (MTPV) trajectory. With respect to the linear motor model, the nonlinear flux-linkage model is gradually receiving attention from researchers. This modeling method represents the nonlinear behavior of the motor through the direct establishment of a bidirectional mapping relationship between flux-linkage and current. It is capable of naturally incorporating the effects of magnetic saturation and cross-coupling factors. However, the analysis of the current trajectory optimal criteria based on this model has not yet been reported. In this paper, the optimal criteria for the MTPA and MTPV current trajectories are analyzed based on the nonlinear flux-linkage model of IPMSMs. Firstly, the nonlinear flux-linkage model of the tested IPMSM is established by the experimental calibration method. The mathematical analytical expressions of the MTPA and MTPV optimal criteria are then analyzed by constructing and solving optimal problems with different objectives. Finally, the current command table applicable to actual motor control is constructed by calculating the current command for different operating conditions according to the optimal criteria proposed in this paper. The validity and feasibility of the optimal criteria proposed in this paper are verified through experimental tests on different operating conditions. Full article

In this paper, the model reference adaptive system (MRAS) method has been employed to observe speed in sensorless field-oriented control (FOC) with flux weakening (FW) and maximum torque per ampere (MTPA) operations for the interior permanent-magnet synchronous motor (IPMSM). This paper focuses on the modified MRAS observer, which is based on the sigmoid function as a switching function and also the adaptive sliding mode coefficient. The sliding mode strategies are employed for the adaptation mechanism instead of the PI controller. The conventional PI-MRAS causes oscillations in rotor speed. To solve this problem, the modified adaptive super-twisting algorithm (STA)-based MRAS method is proposed by utilizing the sigmoid function. The proposed modified MRAS is compared to conventional methods. Additionally, it is examined for performance against the fast terminal sliding mode (FTSM), which is applied to the MRAS as an adaptation mechanism in terms of sliding mode strategies. The modified STA-MRAS is explored under the ECE and EUDC (Extra Urban Driving Cycle) drive cycles for electric vehicle applications. Finally, the obtained results show the validity and capability of the proposed adaptive STA-MRAS in terms of speed tracking. Full article

Series-winding three-phase PMSMs have a higher bus voltage utilization than the conventional three-phase PMSMs with star connection. This topology is suitable for applications with a limited bus voltage. However, the zero-sequence current controller will reduce the bus voltage utilization of the series-winding PMSMs, which causes problems in the flux-weakening controller design. The conventional flux-weakening control algorithms will cause the series-winding PMSMs to enter the overmodulation region early and degrade the performance of the zero-sequence current suppression algorithm. In this paper, a new flux-weakening controller with a dynamic fundamental voltage limit (FW-DFVL) is designed for the series-winding three-phase PMSM traction system. Firstly, the space vector modulation method combines the proposed virtual zero-sequence vectors to realize both the fundamental current generation and the zero-sequence current suppression. The accurate bus voltage utilization in the fundamental current subspace can be derived from the proposed modulation method. Secondly, the gradient descent method generates the flux-weakening d-axis reference current with the dynamic fundamental voltage, which will converge faster than the conventional PI-based flux-weakening control scheme. Thirdly, the flux-weakening controller in the overmodulation region is also designed where the zero-sequence current will no longer be suppressed. The bus voltage utilization is V_dc in this operation mode. Finally, both the simulation and experimental results are utilized to verify the effectiveness of the proposed FW-DFVL, where faster dynamic performance and higher bus utilization are observed. Full article

A control approach for aircraft Starter/Generator (S/G) with Permanent Magnet Machine (PMM) operating in Flux Weakening (FW) mode is presented. The proposed strategy helps the previous approaches which are adopted for the Variable Voltage Bus (VVB) or Voltage Wild Bus (VWB) concept for an aircraft Electric Power System (EPS), to cover a wide speed range in motoring and generation modes. Compared to prior works, the proposed control approach adjusts the q-axis reference voltage with a single current regulator, and the maximum available voltage provided by the converter is used to evaluate the d-axis voltage. By adopting the proposed approach, the DC bus voltage can be fully utilized, increasing aircraft efficiency by allowing the S/G system to operate at a wide range of speeds. The results of the analytical design and the performance of the system were verified by time-domain simulations using MATLAB/Simulink and experiments and compared to the conventional method. Full article

Interior permanent-magnet synchronous machines are widely spreading in automotive and vehicle traction applications, because of their high efficiency over a wide speed range. This capability can be achieved by appropriated control strategies: Maximum Torque per Ampere (MTPA), Flux Weakening (FW) and Maximum Torque per Volt (MTPV). However, these control trajectories are often based on an simplified magnetic model of the electrical machine. In order to improve the evaluation of machine output capabilities, nonlinear magnetic behavior must be modeled. This is not only related to the final application with a given drive and control structure, but also during the design process of the electric machine. In the design process, the output torque Vs. speed characteristic must be calculated following MTPA, MTPV and FW in the most accurate way to avoid significant error. This paper proposes a set of algorithms to compute MTPA, FW and MTPV curves for interior permanent-magnet synchronous machines taking into account the machines’ nonlinearities caused by iron saturation and compares differed approaches to highlight the torque–speed capabilities for the same machine following different methods. The algorithms are based on the maps of the equivalent inductances of a reference interior permanent-magnet synchronous machine and inductances maps were obtained via 2-D Finite Element Analysis over the machine’s operating points in $i_d-i_q$ reference plane. The effects of different 2-D finite element methods are also computed by both standard nonlinear magnetostatic simulations and Frozen Permeability simulations. Results show that the nonlinear model computed via frozen permeability is more accurate than the conventional linear and nonlinear models computed via standard magnetostatic simulations; for this reason, during the electrical machine design, it is important to check the expected performance employing a complete inductance map and frozen permeability. Full article

Recently, non-rare-earth motors are attracting more and more attention due to the booming of the electric vehicle (EV) market and, more importantly, the increasing price of the rare-earth magnet material. This paper focuses on the performance comparison among a commercial interior permanent magnet (IPM) motor and two non-rare-earth motors, including a synchronous reluctance motor (SynRM) and a permanent-magnet-assisted synchronous reluctance motor (PMaSynRM). The design procedure to develop a high-torque-density, low-torque-ripple and high-efficiency SynRM is presented. Combined with a developed automatic modeling and simulation procedure, the finite element analysis (FEA)-based differential evolution (DE) algorithm is introduced for the SynRM rotor optimization. In order to fully inspire the potential of the SynRM, a novel method to optimize the motor split ratio is proposed under the constraint of the copper loss. In addition, different slot–pole combinations are investigated to maximize the motor torque, and the rotor structure is also dealt with towards the centrifugal stress at the maximum operating speed. Finally, the motor performance comparison is carried out, and the results show that although the SynRM achieves almost 61% cost savings, its poor torque capability, power factor and flux weakening (FW) capability are non-negligible defects. On the contrary, the PMaSynRM exhibits excellent features for the EV applications in terms of cost, torque density, efficiency and FW capability. This paper presents a novel split ratio optimization method for the optimal SynRM/PMaSynRM design and demonstrates the characteristics of the IPM motors, SynRMs and PMaSynRMs for EV applications. Full article

This paper presents a flux-weakening model predictive control (FW-MPC) for the interior permanent magnet synchronous motor (IPMSM) drive system. The FW control is a strategy to extend the IPMSM’s operating region. However, the primary FW needs to track the torque reference and maximize the electrical torque per current amplitude with the current and voltage limitations. The two objects make it impossible to solve the FW problem using the optimization method. We proposed an equivalent optimization problem to simplify the complex FW problem, including two objective functions. The MPC is selected as the controller due to its high robustness and transient performance. The constraints from the equivalent optimization problem are added in the MPC to control the IPMSM in the FW region. The simulation and experiment results indicate that the proposed FW-MPC is feasible and effective in driving the IPMSM in the FW region. The proposed FW-MPC can find the optimal point with the maximum electrical torque satisfying the current and voltage limitations. Therefore, the proposed FW-MPC can extend the IPMSM’s operating region, benefiting the IPMSM’s application. Full article

This paper deals with motor design aspects and control strategies for the flux-weakening (FW) operation of synchronous motors. The theory of FW is described by taking into account different control schemes. The advantages and drawbacks of each one are discussed, as well. Moreover, some motor design considerations for achieving an effective FW operation are illustrated for permanent magnet (PM), wound rotor (WR) and reluctance (REL) synchronous machines, using the per unit approach. The distinguishing characteristic of this review provides two-fold attention on both machine design and control strategies obtained by several collaborations with industrial and commercial companies. Full article

This paper proposes an optimized flux weakening (FW) control strategy for interior permanent-magnet synchronous electric motor to address the critical issues that could occur under torque setpoint transition in flux weakening region, due, for example, to an emergency braking. This situation is typical in electric vehicles where the electrical machines operate over a wide speed range to reach high power density and avoid gearboxes. Two modified traditional flux weakening strategies are proposed in this paper to improve torque control quality during high speed torque transition. The proposed modified control strategies were validated both by Matlab/Simulink simulations, modeling the power train of a light vehicle application, and extensive experimental tests on a dedicated test bench. Full article

This paper deals with the potentials of a Hybrid-Excitation Permanent-Magnet (HEPM) machine. The HEPM machine is characterized by a rotor including both permanent magnets (PMs) and excitation coils. The PMs produce a constant flux at the air gap of the machine, while an excitation current is supplied so as to regulate such a flux. A flux increase could be necessary during transient overload operations, while a flux decrease is useful during Flux-Weakening (FW) actions to operate at speeds higher than the nominal speed. Torque, power, efficiency, flux density and losses of an interior permanent magnet (IPM) motor and an HEPM motor are analyzed in detail. It is shown that this excitation winding produces a great advantage in terms of torque and power performance during the operations at speeds higher than the nominal speed. Despite the additional rotor losses, it is shown that there is a higher efficiency. Full article