Search Results (29)

Glyphosate is the most widely used herbicide worldwide, but many current detection methods rely on lab-based chromatography, requiring costly equipment and expert users. Here, we describe a low-cost, field-deployable fluorescence biosensing platform for glyphosate detection in water and soil. An engineered variant of the Escherichia coli periplasmic binding protein PhnD was optimized through strategic fluorophore placement to produce a robust fluorescence signal increase upon glyphosate binding. The biosensor was integrated into a self-contained, 3D-printed device that functions as a miniature fluorometer, providing a simple yes-or-no output for non-expert users while retaining access to raw fluorescence data. The device exhibits nanomolar fluorescence sensitivity with results comparable to a benchtop fluorometer. Using this platform, glyphosate was reliably detected in buffered solutions, commercial herbicides, tap water, and soil extracts. To mitigate false positives arising from phosphate interference, we developed a dual-sensor strategy incorporating an independent phosphate biosensor and a second-generation device capable of multi-wavelength fluorescence detection. Together, these results demonstrate an affordable and versatile biosensing platform with strong potential for field-based environmental monitoring. Full article

Bisphenol S (BPS) is widely used as a replacement for bisphenol A, yet accumulating evidence suggests that it has comparable endocrine and cardiovascular toxicity. Here, we investigated whether prolonged low-dose BPS exposure induces subtle but classifiable phenotypic alterations in human coronary artery endothelial cells (HCAEC), using an end-to-end experimental and ML pipeline that spans cell culture, high-content imaging, feature extraction, and robust classification. Cells were exposed to 0.1 µM BPS for 96 h and profiled using a cell painting assay and high-content microscopy. Image segmentation yielded ~2500 quantitative features per cell across four compartments—Membrane, Cytoplasm, Ring region (i.e., perinuclear region), and Nucleus—for multiple fluorophores. We systematically compared different classifiers (Random Forest, XGBoost, LASSO logistic regressor) using feature selection (MRMR, ReliefF, LASSO) or transformation-based dimensionality reduction (PCA, autoencoders). Tree-based ensembles robustly handled high-dimensional inputs, with XGBoost combined with ReliefF-selected features achieving the best performance. The most informative descriptors predominantly mapped to mitochondrial and nuclear channels, indicating early alterations in mitochondrial organisation and chromatin-related features. These findings show that chronic low-dose BPS exposure elicits a distinct endothelial phenotype, consistent with early endothelial dysfunction, and demonstrate that integrating high-content imaging with machine learning provides a sensitive, scalable framework for vascular toxicity assessment of environmental contaminants. Full article

Hydrogen peroxide (H₂O₂) plays a very vital role in industrial and biological processes, but its high concentration may cause health hazards. Therefore, accurate detection of H₂O₂ is crucial for chemical and biological sensing applications. In this work, a ratiometric fluorescent probe was developed using a core–shell structural silica nanoparticle for the detection of H₂O₂. Firstly, a silica core structure with red fluorescence emission was constructed by encapsulating a Schiff base compound (SD). Afterwards, a mesoporous silica shell was fabricated, and the AIE featured fluorophore with a H₂O₂ response character was covalently linked on the surface of the mesoporous shell layer. As recognition sites on the shell, blue-emitting TB molecules specifically identified H₂O₂ through their phenylboronic acid ester group. The blue fluorescence of core–shell structural nanoprobes would be quenched in the presence of H₂O₂, while red fluorescence remained unchanged, ensuring the high sensitivity and specificity of the ratio sensing. This design has demonstrated significant potential for the reliable monitoring of hydrogen peroxide in biological and environmental applications. Full article

Paper-based analytical devices have emerged as a versatile and cost-effective platform for on-site chemical and biological analysis. The integration of fluorescence detection with smartphone imaging has significantly enhanced the analytical performance and portability of these systems, enabling sensitive, rapid, and user-friendly detection of diverse analytes. This review highlights recent advancements in paper-based fluorescence sensing technologies, focusing on their design principles, materials, and detection strategies. Emphasis is placed on the use of nanomaterials, quantum dots, and carbon-based fluorophores that improve sensitivity and selectivity in food, bioanalytical, and environmental applications. The role of smartphones as optical detectors and data processing tools is explored, underscoring innovations in image analysis, calibration algorithms, and app-based quantification methods. Full article

A novel fluorescent probe (PYB) for selective and sensitive detection of Cu²⁺ ions was rationally designed and synthesized via a multi-step organic reaction using pyrene as the fluorophore and salicylaldehyde-diethylenetriamine Schiff base as the recognition moiety. The structural characterization of PYB was confirmed by ¹H NMR, ¹³C NMR, and high-resolution mass spectrometry (HRMS). Photophysical properties investigation revealed that the probe exhibited strong fluorescence emission at 362 nm in DMF/HEPES-NaOH buffer solution (v:v = 1:1, pH 7.4), which underwent a significant fluorescence quenching response (quenching efficiency up to 77%) upon the addition of Cu²⁺, attributed to the formation of a 1:1 PYB-Cu²⁺ complex (binding constant K = 799.65 M⁻¹). The probe showed excellent selectivity for Cu²⁺ over other common metal ions (Ba²⁺, Na⁺, Mg²⁺, Zn²⁺, Cd²⁺, Ca²⁺, Mn²⁺, Pb²⁺, Hg²⁺, Fe³⁺, Co²⁺), with a low detection limit of 8.35 × 10⁻⁷ M, which is well below the maximum allowable concentration of Cu²⁺ in drinking water specified by the World Health Organization (WHO). Furthermore, a portable fluorescent test strip based on PYB was successfully fabricated, enabling rapid and visual detection of Cu²⁺ under UV light. Fluorescence imaging experiments in living HepG2 cells demonstrated that PYB could penetrate cell membranes efficiently and realize the intracellular detection of exogenous Cu²⁺. These results collectively indicate that PYB holds great potential as a practical tool for Cu²⁺ detection in environmental monitoring, food safety, and biological systems. Full article

Golden pompano (Trachinotus ovatus) is the largest-scale marine aquaculture fish species in China, with a significant economic and nutritional value as a high-quality seafood product. The recent outbreak of an epidemic caused by a novel Carpione rhabdovirus (CAPRV) occurred in cultured golden pompano. To address it, a CAPRV enzyme-mediated one-step sample processing–reverse transcription–enzyme-mediated duplex exponential amplification (EmOSP-RT-EmDEA) detection system was developed. This innovative molecular diagnostic tool integrates enzyme-mediated one-step sample processing (EmOSP) with enzyme-mediated duplex exponential amplification (EmDEA) technology. Unlike traditional RPA-Cas12a detection methods, this system directly incorporates fluorophores into RNA components, eliminating the need for exogenous fluorescent probes while maintaining high sensitivity. It enables rapid, sensitive, and specific detection of CAPRV2023 across various sample types, including clinical, invasive, minimally invasive, and environmental specimens. Performance evaluation of the CAPRV2023 EmOSP-RT-EmDEA detection system against conventional diagnostic methods, such as TaqMan qPCR and traditional PCR, demonstrated superior sensitivity, with a detection limit as low as 4 copies/μL, and exceptional specificity. The optimized EmOSP protocol for nucleic acid extraction from fecal, hepatic, and water samples provided robust and reproducible results. The EmOSP-RT-EmDEA system achieved a detection rate of 68.14% in fecal samples, matching the performance of the gold-standard TaqMan qPCR assay. Full article

The design of suitable chemosensors for environmental pollutants and toxins detection at trace levels remains a critical area of research. Among various chemosensors, Zn(II) coordination polymers have garnered special interest as fluorescent probes for environmental applications. In this article, we report the synthesis of a nitrogen-rich luminescent Zn(II) coordination polymer, TDPAT-Zn-CP, designed for differential fluorescent sensing of antibiotics in an aqueous medium. TDPAT-Zn-CP was synthesized using a star-shaped 2,4,6-tris(di-2-pyridylamino)-1,3,5-triazine (TDPAT) fluorophore, a promising blue-emitting compound. The morphological and structural properties of TDPAT-Zn-CP were thoroughly analyzed using conventional spectroscopic and analytical techniques. The fluorescence titration studies in aqueous medium demonstrated that TDPAT-Zn-CP exhibits remarkable selectivity, sensitivity, and differential fluorescence sensing responses towards various antibiotics. Among the antibiotics tested, TDPAT-Zn-CP displayed a significant fluorescence quenching and high selectivity for sulfamethazine (SMZ), with a Stern–Volmer quenching constant of K_SV = 1.68 × 10⁴ M⁻¹ and an impressive sensitivity of 4.95 ppb. These results highlight the potential of TDPAT-Zn-CP as a practically useful, highly effective polymeric sensor for the differential fluorescence-based detection of antibiotics in water, offering a promising approach for environmental monitoring and contamination control. Full article

Fluorescent sensors are indispensable tools in fields such as molecular biology, clinical diagnostics, biotechnology, and environmental monitoring, due to their high sensitivity, selectivity, biocompatibility, rapid response, and ease of use. However, conventional fluorophores often suffer from aggregation-caused quenching (ACQ), leading to diminished fluorescence in the aggregated state. The advent of aggregation-induced emission (AIE) luminogens, which exhibit enhanced fluorescence upon aggregation, offers a powerful solution to this limitation. Their unique photophysical properties have made AIE-based materials highly valuable for diverse applications, including biomedical imaging, optoelectronics, stimuli-responsive systems, drug delivery, and chemical sensing. Notably, AIE-based fluorescent probes are emerging as attractive alternatives to traditional analytical methods owing to their low cost, fast detection, and high selectivity. Over the past two decades, considerable progress has been made in the rational design and development of AIE-active small-molecule fluorescent probes for detecting a wide variety of analytes, such as biologically relevant molecules, drug compounds, volatile organic compounds (VOCs), explosives, and contaminants associated with forensic and food safety analysis. This review highlights recent advances in organic AIE-based fluorescent probes, beginning with the fundamentals of AIE and typical “turn-on” sensing mechanisms, and concluding with a discussion of current challenges and future opportunities in this rapidly evolving research area. Full article

Single-molecule fluorescence spectroscopy offers unique capabilities for the low-concentration sensing and probing of molecular dynmics. However, employing such a methodology for versatile sensing and diagnostics under point-of-care demands device miniaturization to lab-on-a-chip size. In this study, we numerically design metalenses with high numerical aperture (NA = 1.1), which are composed of silicon nitride nanostructures deposited on a waveguide and can selectively focus guided light into an aqueous solution at two wavelengths of interest in the spectral range of 500–780 nm. Despite the severe chromatic focal shift in the lateral directions owing to the wavelength-dependent propagation constant in a waveguide, segmented on-chip metalenses provide perfectly overlapping focal volumes that meet the requirements for epi-fluorescence light collection. We demonstrate that the molecule detection efficiencies of metalenses designed for the excitation and emission wavelengths of ATTO 490LS, Alexa 555, and APC-Cy7 tandem fluorophores are sufficient to collect several thousand photons per second per molecule at modest excitation rate constants. Such sensitivity provides reliable diffusion fluorescence correlation spectroscopy analysis of single molecules on a chip to extract their concentration and diffusion properties in the nanomolar range. Achromatic on-chip metalenses open new avenues for developing ultra-compact and sensitive devices for precision medicine and environmental monitoring. Full article

Fluorescent labels, commonly used in highly sensitive analytical techniques for detecting and tracking biomolecules in critical fields like cellular biology, medicine, medicinal chemistry, and environmental science, are currently too expensive for routine use in standard applications, with most exhibiting small Stokes shifts. This limitation underscores the potential of 4-diethylaminobenzaldehyde derivatives as a cost-effective alternative for developing new, bright fluorophores with larger Stokes shifts. In this work, using 4-diethylaminobenzaldehyde as starting material, we developed a simple, cost-effective, and efficient synthetic strategy to produce new affordable small molecules as effective fluorescent labels for biomolecules. Density functional theory and time-dependent density functional theory calculations were also conducted to gain insights into the observed photophysical properties. Full article

The design and development of useful chemosensors for the ultra-trace detection of environmental pollutants and contaminants is a topical area of research. Herein, we report a new nanoscale emissive Zn(II) coordination polymer (TB-Zn-CP) for differential fluorescence sensing of various antibiotics in water. TB-Zn-CP was synthesized using a unique V-shaped green emitting 4-amino-1,8-naphthalimide Tröger’s base (TBNap) fluorophore. The structural and morphological features of TB-Zn-CP were characterized by various standard spectroscopic and microscopy techniques. The fluorescence titration studies in water demonstrated a remarkable sensitivity and differential fluorescence sensing properties of TB-Zn-CP for the fast detection of different antibiotics. Among different antibiotics, chloramphenicol (CRP), 1,2-dimethyl-5-nitroimidazole (DMZ), and sulfamethazine (SMZ) displayed the highest fluorescence-quenching efficiency and superior sensitivity in their detection. The differential sensing capability of TB-Zn-CP was also indicated by visualizable color changes. The Stern–Volmer quenching constant K_SV was determined to be in the order of 10³–10⁴ M⁻¹, and the sensitivity was shown to be at a nanomolar (10⁻⁹ M) level. All these results confirm that TB-Zn-CP can be a potential and practically useful polymeric sensor for differential fluorescence and visual detection of different antibiotics in water. Full article

Faced with rising threats of terrorism, environmental and health risks, achieving sensitive and selective detection of peroxide-based explosives (PEs) has become a global focus. In this study, a turn-on fluorescent probe (BOD) based on benzil (H₂O₂-recognition element) and 4,4-difluoro-4-bora-3a,4a-diaza-s-indacene (BODIPY) derivative (fluorophore) was developed to sensitively and specifically detect hydrogen peroxide (H₂O₂). The synthesized BOD had a very weak fluorescence due to intramolecular donor-excited photo-induced electron transfer (d-PET) effect; however, it could emit a strong fluorescence since H₂O₂ selectively oxidized the benzil moiety and released free BODIPY fluorophore (BOD-COOH). As a result, the proposed BOD detected H₂O₂ in linear detection ranged from 25 to 125 µM with a detection limit of 4.41 µM. Meanwhile, the proposed BOD showed good selectivity toward H₂O₂, which is not affected by other common reactive oxygen species (ROS) and ions from explosive residues. In addition, a blue shift from 508 to 498 nm was observed in the absorption spectra upon addition of H₂O₂. More importantly, the BOD was successfully applied for rapid detection of H₂O₂ vapor with good sensitivity (down to 7 ppb), which holds great potential for practical use in public safety, forensic analysis and environmental monitoring. Full article

One of the main challenges faced in food safety is the accumulation of toxic heavy metals from environmental sources, which can sequentially endanger human health when they are consumed. It is invaluable to establish a practical assay for the determination of heavy metals for food safety. Among the current detection methods, technology based on fluorescent probes, with the advantages of sensitivity, convenience, accuracy, cost, and reliability, has recently shown pluralistic applications in the food industry, which is significant to ensure food safety. Hence, this review systematically presents the recent progress on novel fluorescent probes in determining heavy metals for food safety over the past five years, according to fluorophores and newly emerging sensing cores, which could contribute to broadening the prospects of fluorescent materials and establishing more practical assays for heavy metal determinations. Full article

In this study, a homogeneous fluorescence polarization immunoassay (FPIA) for the detection of hazardous aquatic toxin okadaic acid (OA) contaminating environmental waters was for the first time developed. A conjugate of the analyte with a fluorophore based on a fluorescein derivative (tracer) was synthesized, and its interaction with specific anti-OA monoclonal antibodies (MAbs) was tested. A MAbs–tracer pair demonstrated highly affine immune binding (KD = 0.8 nM). Under optimal conditions, the limit of OA detection in the FPIA was 0.08 ng/mL (0.1 nM), and the working range of detectable concentrations was 0.4–72.5 ng/mL (0.5–90 nM). The developed FPIA was approbated for the determination of OA in real matrices: river water and seawater samples. No matrix effect of water was observed; therefore, no sample preparation was required before analysis. Due to this factor, the entire analytical procedure took less than 10 min. Using a compact portable fluorescence polarization analyzer enables the on-site testing of water samples. The developed analysis is very fast, easy to operate, and sensitive and can be extended to the determination of other aquatic toxins or low-molecular-weight water or food contaminants. Full article

Today we see an increasing demand for new fluorescent materials exhibiting various sensory abilities due to their broad applicability ranging from the construction of flexible devices to bioimaging. In this paper, we report on the new fluorescent pigments AntTCNE, PyrTCNE, and PerTCNE which consist of 3–5 fused aromatic rings substituted with tricyanoethylene fragments forming D-π-A diad. Our studies reveal that all three compounds exhibit pronounced rigidochromic properties, i.e., strong sensitivity of their fluorescence to the viscosity of the local environment. We also demonstrate that our new pigments belong to a very rare type of organic fluorophores which do not obey the well-known empirical Kasha’rule stating that photoluminescence transition always occurs from the lowest excited state of an emitting molecule. This rare spectral feature of our pigments is accompanied by an even rarer capability of spectrally and temporally well-resolved anti-Kasha dual emission (DE) from both higher and lowest electronic states in non-polar solvents. We show that among three new pigments, PerTCNE has significant potential as the medium-bandgap non-fullerene electron acceptor. Such materials are now highly demanded for indoor low-power electronics and portable devices for the Internet-of-Things. Additionally, we demonstrate that PyrTCNE has been successfully used as a structural unit in template assembling of the new cyanoarylporphyrazine framework with 4 D-π-A dyads framing this macrocycle (Pyr₄CN₄Pz). Similarly to its structural unit, Pyr₄CN₄Pz is also the anti-Kasha fluorophore, exhibiting intensive DE in viscous non-polar medium and polymer films, which strongly depends on the polarity of the local environment. Moreover, our studies showed high photodynamic activity of this new tetrapyrrole macrocycle which is combined with its unique sensory capacities (strong sensitivity of its fluorescent properties to the local environmental stimuli such as viscosity and polarity. Thus, Pyr₄CN₄Pz can be considered the first unique photosensitizer that potentially enables the real-time combination of photodynamic therapy and double-sensory approaches which is very important for modern biomedicine. Full article