Search Results (110)

Suspended solids (SS) and dissolved organic matter (DOM) in source water consume chlorine during disinfection, yet how this varies among SS fractions with different settling characteristics remains poorly understood. This study investigated chlorine consumption by SS fractions from Kiso River water using sequential centrifugation based on settleability. Raw water was fractionated into five settled SS fractions (F1–F5), an unsettled fine SS and DOM (W5), and a DOM fraction (W6) from 0.2 µm filtration of W5. Fractions F1–F3 reached complete consumption within 12 h, whereas F4 and F5 showed slower, sustained consumption over the full 72 h period. In contrast, W5 and W6 showed minimal chlorine consumption. The rapid and subsequent slower consumption phases were described by first-order and zero-order models, respectively. Normalization by particle number, total particle surface area, and turbidity showed that lower-settleability particles exhibited higher apparent chlorine reactivity per particle despite lower particle number and total particle surface area. Rate parameters normalized by dissolved organic carbon (DOC) concentration showed lower apparent DOM reactivity per unit DOC. These results demonstrate that particle settleability influences chlorine consumption and highlight particulate-associated constituents as important contributors to chlorine demand, with implications for prioritizing removal of fine, low-settleability particles in treatment. Full article

Mining can significantly affect the spatial distribution and temporal evolution of groundwater chemistry. From July to August 2024, the research team collected 26 surface water and groundwater samples in the Shengli Coal Mine area of the Mongolian Plateau, conducting comprehensive hydrogeochemical analyses on surface water flowing through the mining area, groundwater within the mining area, seepage water, and groundwater outside the mining area. The results indicate that groundwater in this region is notably affected by human activities such as mining operations. Specifically, in surface water flowing through the mining area, concentrations of total dissolved solids (TDS), sulfates, nitrates, and nickel showed significant increases. Compared to groundwater systems in other areas of the Mongolian Plateau, nickel levels in the mining area’s groundwater were significantly higher, while nitrate levels exhibited the opposite trend. A significant positive correlation was observed between metal element concentrations in surface water and groundwater. The study found that abnormal distributions of heavy metals such as beryllium (Be), thallium (Tl), and tin (Sn) may originate from point-source pollution caused by mining activities. Furthermore, concentrations of manganese (Mn), arsenic (As), and antimony (Sb) in the groundwater of this area exceeded relevant regulatory limits, with arsenic being particularly prominent. The levels of arsenic in both surface water and groundwater may pose carcinogenic risks to human health. This study shows that nearly half of the sampled water bodies in the area require purification treatment to meet drinking water standards, highlighting the urgent need for further attention to water quality safety issues. The conclusions derived from this research provide theoretical support for understanding the long-term evolutionary mechanisms of groundwater in mining areas, while also offering important insights for improving groundwater environmental management and ensuring water resource security in mining regions. Full article

Groundwater quality in arid and semi-arid regions is increasingly affected by salinization, evaporation, abstraction, and agricultural return flow. This study evaluates the hydrochemical evolution, isotopic characteristics, ²²²Rn activity, and water-use suitability of groundwater and associated waters in Karbala Governorate, central Iraq. Seventeen groundwater, lake water, and municipal supply water samples were analyzed for physicochemical parameters, major ions, δ¹⁸O, δ²H, and ²²²Rn. Hydrochemical, isotopic, and water-quality assessment methods were applied to evaluate groundwater evolution, salinization, and suitability for drinking and irrigation. The waters are near-neutral, with pH values of 6.18–7.35, but are strongly mineralized. Electrical conductivity ranges from 1440 to 16,305 µS/cm, and total dissolved solids (TDS) range from 592 to 10,191 mg/L. Most samples belong to a Ca–Mg–SO₄–Cl facies, indicating sulfate- and chloride-rich hard water evolution. The highest mineralization occurs near Karbala proper and lake-influenced sites. Ion ratios and chloro-alkaline indices indicate that evaporite dissolution, gypsum/anhydrite dissolution, carbonate interaction, evaporation, and local ion exchange jointly control groundwater chemistry. Stable isotopes indicate meteoric origin with variable evaporative enrichment; however, highly saline but isotopically depleted water, particularly W8, shows that evaporation alone cannot explain salinization. ²²²Rn activities range from below detection to 11.28 Bq/L and mainly reflect local aquifer contact and degassing. High TDS, sulfate, chloride, and very high hardness limit suitability for drinking-water use. For irrigation, the sodium hazard is low, but salinity, hardness, magnesium hazard, and permeability constraints make most samples unsuitable or restricted. Management should prioritize salinity and hardness control, treatment or blending before domestic use, restricted irrigation of the least saline wells under drainage and soil-salinity monitoring, protection of less mineralized recharge zones, and long-term monitoring of lake-adjacent and agriculturally influenced wells. Full article

Trihalomethanes (THMs) are priority disinfection by-products in drinking water, and their effective removal remains a persistent challenge for sustainable treatment. Here, olive mill solid waste (OMSW) was valorized into biochar (BC) and evaluated as a low-cost adsorbent for chloroform, bromodichloromethane (BDCM), chlorodibromomethane (CDBM), and bromoform under environmentally relevant conditions. Among the prepared materials, thermally activated BC (BC-T) performed best, achieving equilibrium removals of 74.7 ± 6.6% for chloroform, 91.1 ± 0.8% for BDCM, 87.2 ± 1.9% for CDBM, and 93.8 ± 0.3% for bromoform at 3000 mg/L. Adsorption increased with bromine substitution, following the order of bromoform > CDBM ≈ BDCM > chloroform, consistent with rising hydrophobicity. In contrast, KOH and Zn/Fe activation increased the BET surface area but did not improve THM removal, suggesting that adsorption was controlled by surface chemistry and site accessibility rather than surface area alone. Persulfate (PSF) addition reduced THM removal, indicating that oxidant activation did not compensate for the loss of adsorption capacity. Adsorption data were well described by the Freundlich isotherm and pseudo-second-order kinetics. BC-T also maintained high removal efficiency in drinking water, demonstrating its promise as a practical polishing adsorbent for THM control and as a route for high-value valorization of an abundant agricultural residue. Full article

This study presents a short-term, IoT-enabled sensor-based assessment of treated municipal water and decentralized groundwater in Bragança, northeastern Portugal. Two drinking-water supply contexts were compared: treated surface-water-derived municipal water from the public supply system and groundwater from a decentralized supply system serving part of a higher education campus. Five sampling points were monitored during three campaigns between January and March 2026. At each point, pH, electrical conductivity, temperature, oxidation–reduction potential, and total dissolved solids were recorded at 10 s intervals over approximately 10 min monitoring windows using a multiparameter probe integrated into an IoT-enabled data acquisition workflow. Microbiological analyses were performed on groundwater samples as complementary information. Treated municipal water showed lower mineralization, narrower parameter ranges, and higher oxidation–reduction potential, reflecting source-water characteristics, treatment, and operational control. Groundwater showed higher mineralization, lower oxidation–reduction potential, and greater variability among sampling points and campaigns, consistent with stronger local hydrogeochemical and operational influences. The repeated short-interval readings provided more detailed physicochemical profiles than isolated spot measurements, although the short monitoring windows do not represent continuous long-term high-frequency monitoring. Overall, the results support standardized IoT-enabled sensor-based monitoring as a complementary tool for short-term water-quality assessment and indicate the need for longer seasonal datasets and laboratory confirmation. Full article

Damage to urban water supply infrastructure can rapidly compromise access to safe water and force households to rely on alternative sources of uncertain quality. This study presents a case-based assessment of water quality and emergency household-level treatment options in Mykolaiv, Ukraine, following conflict-induced disruption of the centralized water supply system. Water samples collected from selected groundwater and distribution-network points were analyzed for physicochemical, organoleptic, and microbiological indicators, including total dissolved solids, hardness, sulfates, chlorides, iron, permanganate oxidizability, total microbial count, and E. coli. The results showed elevated mineralization, increased sulfate and chloride concentrations, high hardness, organic load indicators, and episodic microbiological contamination in several samples. A low-cost four-stage household treatment procedure combining chemical oxidation, thermal treatment, sorption, and short-term preservation was evaluated as a preliminary emergency approach. The procedure improved odor, taste, hardness, iron content, permanganate oxidizability, and microbiological safety; however, it did not fully reduce total dissolved solids, sulfates, or chlorides to drinking-water standards. Therefore, the treated water should be considered non-potable and suitable mainly for limited domestic and hygienic uses unless additional desalination or blending is applied. The study highlights both the potential and the limitations of simple household-level interventions under emergency water supply disruption and emphasizes the need for decentralized treatment support, monitoring, and long-term infrastructure recovery. Full article

Santiago, Dominican Republic, faces a growing deficit in the supply of drinking water. Rainwater harvesting systems have the potential to provide a reliable and sustainable source of drinking water. This research examines water quality from the pilot testing of a rainwater harvesting system designed to directly capture rainwater in planter boxes, pre-filter it and store it. The pilot testing consisted of a field experiment comparing rainwater harvested with four filter media compositions with varying levels of sand (34, 62, 66 and 76%). From May 2024 to May 2025, bi-weekly water samples were tested for physicochemical and microbiological parameters including pH, electrical conductivity, total dissolved solids, turbidity, biochemical oxygen demand, heterotrophic bacteria, total and fecal coliforms, E. coli, and Enterobacteriaceae. Statistical models were fitted for each water quality parameter, using linear mixed-effects models or generalized linear mixed-effects models with a logit link, to evaluate the association between filter unit design and water quality outcomes. Results showed that physicochemical quality met Dominican drinking water standards but infrequently met bacteriological standards. However, filters with higher sand composition produced higher quality water for both physicochemical and microbiological parameters. Additional treatment such as chlorination would reduce bacteria and protect the water during storage. Full article

Groundwater contamination by dissolved metals and metalloids in the Chiang Mai Basin is an important drinking-water concern, yet the coupled depth patterns, hydrogeochemical controls, composite contamination status, and screening-level health implications have not previously been assessed in an integrated basin-scale framework. This study evaluated 120 groundwater samples from alluvial wells classified by depth as shallow (≤30 m, n = 40), intermediate (31–60 m, n = 35), and deep (>60 m, n = 45). Samples were analyzed for nine dissolved metals and metalloids (Fe, Mn, As, Cd, Pb, Cr, Zn, Hg, and Se) together with pH, Eh, and total dissolved solids (TDS). The highest exceedance frequencies were observed for Fe (72.5% of samples, >0.3 mg/L acceptability threshold), Mn (65.0%, >0.08 mg/L), and As (45.8%, >10 μg/L). Fe and Mn increased significantly with depth, whereas As was enriched in deep wells but showed no statistically significant depth dependence. Pearson correlation and principal component analysis consistently identified a dominant redox-associated component in which Fe, Mn, and As covaried negatively with Eh, supporting redox-sensitive co-enrichment in deeper groundwater. Contamination factors calculated relative to selected global groundwater background values were >6 for all seven evaluated metals (Fe, Mn, As, Cd, Pb, Cr, and Zn), and the overall pollution load index (PLI) was 9.11, with the highest depth-specific PLI in deep wells (10.42). These indices are interpreted here as background-relative screening tools rather than stand-alone regulatory measures. A screening-level ingestion risk assessment identified arsenic as the dominant toxicological driver, with hazard quotients (HQ) of 1.97 for adults and 4.60 for children, and an estimated lifetime cancer risk (LCR) of 8.87 × 10^–4. The results support targeted monitoring of deeper wells, routine screening for As and Mn, and treatment strategies that can address the co-occurring Fe–Mn–As assemblage in alluvial groundwater. Full article

Physicochemical and microbiological parameters are important indicators of drinking water quality. This study assessed the quality of groundwater used for drinking in four regions of Kosovo at 16 locations using an integrated assessment framework that combined physicochemical, microbiological, and Water Quality Index (WQI) approaches. The results reveal substantial spatial variability in water quality. While most physicochemical parameters remained within recommended limits, elevated values of total dissolved solids (up to 2792.5 mg/L), electrical conductivity (up to 2768.5 µS/cm), nitrate (up to 60.75 mg/L), and phosphate (up to 0.875 mg/L) were observed at several locations, indicating localized hydrogeochemical and anthropogenic influences. Dissolved oxygen levels were generally low (0.68–5.49 mg/L), reflecting limited aeration conditions in groundwater systems. Microbiological analysis revealed critical contamination, with Escherichia coli concentrations up to 299.9 CFU/100 mL, and all sampling sites exceeded permissible limits, indicating widespread fecal pollution and rendering the groundwater unsafe for direct consumption. WQI assessment further confirmed this condition, where 93.75% of locations were classified as medium quality using the NSF-WQI method, whereas the WA-WQI method categorized 68.75% of samples as poor and 6.25% as very poor. The novelty of this study lies in the integrated evaluation of hydrogeochemical processes and microbiological contamination using dual WQI methods and multivariate statistical analysis, providing a comprehensive understanding of groundwater degradation pathways. The findings are significant for policymakers, environmental managers, and public health authorities, highlighting the urgent need for groundwater treatment, improved sanitation infrastructure, and sustainable water resource management strategies in vulnerable regions. Full article

Seventy-one percent of the Earth’s surface is covered by water, with groundwater being one of the most important natural resources globally. In Purba Medinipur, the population growth rate has surged to ~0.75% per annum, outpacing that of West Bengal, due to agricultural and industrial development. Urbanization has led to an increase in the built-up area by 139.10% per annum, which has reduced the percolation of water into the groundwater table. Currently, 72% blocks are affected by salinity. Groundwater quality parameters such as pH, total dissolved solids (TDS), turbidity, iron, manganese, total hardness, and chloride were assessed over three seasons—pre-monsoon, monsoon, and post-monsoon—using 326 data points from 2015 to 2022. Turbidity and iron are the primary concerns for groundwater quality, contributing to pollution. Other parameters, including TDS and total hardness, were approaching acceptable limits across all seasons. Since 2021, turbidity has exceeded permissible limits during the pre-monsoon season, resulting from the dissolved minerals and seawater intrusion. The arithmetic weighted groundwater quality index has shown an increasing magnitude over time, indicating a decline in drinking water quality by 2030. The pre-monsoon season exhibits the most severely affected groundwater quality. Principal component analysis indicated that TDS and chloride are the major contaminants during the pre-monsoon, confirming seawater intrusion. In other seasons, metals like iron, TDSs, and manganese are significant contaminants. The hydraulic barriers, subsurface dams, and hybrid treatment can be adopted in the study area to abate the increasing groundwater quality concentration both on a yearly and seasonal basis. Full article

One of the major current societal challenges concerns the reuse of waste materials and valuable substances to mitigate the environmental impact of human activities, which has led to the increasing release of pollutants, from plastics to pharmaceuticals. In this study, we report a simple recycling strategy for surgical masks to obtain an activated carbon-like material, suitable for the solid-phase extraction (SPE) of Phthalic acid esters (PAEss) from plastic bottled water. The sorbent was produced by high-temperature calcination after sulfuric acid treatment to enhance the thermal stability of polypropylene. The sorbent was characterized by thermal analysis, Raman spectroscopy, FTIR and scanning electron microscopy. SPE was used to preconcentrate the analytes, and the main parameters affecting the extraction, such as pH, sorbent amount, organic modifier percentage, ionic strength and elution volume, were optimized. PAEs were determined by UHPLC-PDA under gradient elution. The developed method was linear in the range 0.25–1000 ng/mL, with LOQs between 0.25 and 0.10 ng/mL and LODs between 0.008 and 0.003 ng/mL. Recovery ranged from 95.9 to 104.7%, the precision expressed as RSD% was below 7.32, and the accuracy expressed as BIAS% ranged from −5.75 to 5.93. The proposed approach provides a simple and low-cost valorization route for PPE waste, while enabling reliable PAEs analysis in drinking water. Full article

Scientific concern regarding the widespread occurrence of micropollutants (MPs) in aquatic environments has been growing. Background/Objectives: Since conventional wastewater and drinking water (DW) treatment plants are generally unable to completely remove MPs, their presence in DW may occur, potentially posing adverse effects on public health. Highly sensitive analytical methods are crucial, as MPs may occur at very low concentrations in DW, usually at ng L⁻¹ levels. Methods: An offline solid-phase extraction ultra-high performance liquid-chromatography coupled to tandem mass-spectrometry (SPE-UHPLC-MS/MS) method was optimized and validated for the determination of 23 MPs in DW, including 12 pharmaceuticals, 9 pesticides, and 2 UV-filters, listed in the 2 most recent European Union (EU) Decisions (2022/1307 and 2025/439) for surface water monitoring, and in the revised EU Urban Wastewater Treatment Directive (2024/3019). The validated method was applied to 50 DW samples collected across Portugal. Results: The optimized SPE-UHPLC-MS/MS method showed high analytical sensitivity, achieving method detection limits below 1.50 ng L⁻¹. Up to 3 MPs were detected per sample, with quantifiable concentrations of each ranging from 0.28 to 98.8 ng L⁻¹. However, benzotriazole and dimoxystrobin exceeded the upper limits of their calibration curves (i.e., concentrations higher than 133 and 117 ng L⁻¹, respectively) in one and 3 of the collected samples, respectively. Considering all analyzed samples, 4 (fluconazole, irbesartan, dimoxystrobin, and benzotriazole) of the 23 target compounds were detected. Hazard quotient values for all detected MPs were well below 0.1. Conclusions: The validated SPE-UHPLC-MS/MS method is suitable for the sensitive determination of MPs in DW. Some MPs were detected, with concentrations indicating no expected human health risks under the conditions evaluated. Further monitoring campaigns should be conducted in the future, with compounds exceeding the limits of the calibration curves requiring special attention. Full article

Community water systems in the United States provide drinking water to more than 300 million people annually, making their reliability fundamental to public health. In regions with long histories of racial segregation and unequal infrastructure maintenance, water system failures can deepen existing environmental injustices. This study examines water quality conditions in the Jackson, Mississippi, metropolitan area following the 2022 distribution system collapse and a decade of repeated noncompliance with the Safe Drinking Water Act’s Lead and Copper Rule (LCR). Using the U.S. Environmental Protection Agency’s 2024 updated LCR tap sampling protocol, water samples from 29 sites were collected. Samples were analyzed for lead, copper, iron, zinc, chlorine, sulfate, pH, and total dissolved solids concentrations. Chlorine-to-sulfate mass ratios (CSMR) were also calculated to evaluate corrosion potential. Demographic surveys, statistical analyses, and geospatial visualizations were used to interpret neighborhood-level patterns. Our findings show that all sites met primary drinking water standards and complied with LCR action levels but exceeded secondary drinking water standards at 100% of study sites. Seven sites exhibited CSMR values above the threshold, indicating increased susceptibility to corrosion. These results highlight the need for targeted corrosion control, treatment optimization, and ongoing monitoring, particularly in historically marginalized communities. Full article

Groundwater is the main water source for irrigated agriculture, accounting for an increasing share of the domestic supply in the hyper-arid district of La Yarada Los Palos (Tacna, Peru); however, at the sector scale, concerns about arsenic, boron and salinity remain poorly quantified. Arsenic and boron were selected as target contaminants because of their naturally elevated concentrations associated with coastal and volcanic hydrogeological settings, and their well-documented implications for human health and irrigation suitability. This study reports a 12-month monitoring program (September 2024–August 2025) in three irrigated sectors, in which wells were sampled monthly and analyzed by inductively coupled plasma–mass spectrometry (ICP-MS) for total arsenic, boron, lithium and sodium, along with electrical conductivity, pH, temperature and total dissolved solids. The sector–month total arsenic means ranged from 0.0089 to 0.0143 mg L⁻¹, with 33 of 36 exceeding the 0.010 mg L⁻¹ drinking water benchmark recommended by the World Health Organization (WHO). Total boron ranged from 1.11 to 2.76 mg L⁻¹, meaning that all observations were above the 0.5 mg L⁻¹ irrigation guideline for agricultural use proposed by the United Nations Food and Agriculture Organization (FAO). A marked salinity gradient was observed from the inland Sector 1-BH (median Na ≈ 77 mg L⁻¹; EC ≈ 1.2 mS cm⁻¹) to the coastal Sector 3-LC (median Na ≈ 251 mg L⁻¹; EC ≈ 3.3 mS cm⁻¹), with Sector 2-FS showing intermediate salinity but the highest median boron and lithium levels. Spearman rank correlations indicate that sodium, electrical conductivity and total dissolved solids define the main salinity axis, whereas arsenic is only moderately associated with boron and lithium and is not a simple function of bulk salinity. Taken together, these results show that groundwater from the monitored wells is not safe for drinking without treatment and is subject to at least moderate boron-related irrigation restrictions. The sector-resolved dataset provides a quantitative baseline for La Yarada Los Palos and a foundation for future work integrating expanded monitoring, health-risk metrics and management scenarios for arsenic, boron and salinity in hyper-arid coastal aquifers. Full article

Cactus leaves from the Cactaceae family, particularly the Opuntia genus, have attracted increasing attention as natural coagulants for water treatment applications. In this work, Cactus-based extracts were investigated for drinking water treatment through the coagulation–flocculation process. Several extraction routes were examined, including Ca-J, Ca-H₂O, Ca-NaOH (0.05 M), Ca-NaCl (0.5 M), and Ca-HCl (0.05 M), and their performance was evaluated using jar test experiments. The removal efficiencies of total coliforms (TC), anaerobic sulfite-reducing bacteria (ASRB), total suspended solids (TSS), and turbidity were assessed, and the most effective extract was subsequently tested in a semi-industrial pilot-scale coagulation–flocculation–settling system. The physicochemical properties of the Cactus material were characterized using FTIR, SEM, XRD, and MALDI-TOF analyses. Results revealed bioactive components, including carbohydrates, proteins, tannins, flavonoids, and glucose, with functional groups (carboxyl, hydroxyl, carbonyl) responsible for coagulation. XRD and SEM analyses showed a semi-crystalline structure and a heterogeneous surface with fiber networks, while MALDI-TOF confirmed the presence of flavonoid and tannin compounds. These features collectively contribute to the effective removal of turbidity, suspended solids, and microbial contaminants. Among the tested extracts, Ca-NaOH (0.05 M) exhibited the highest removal efficiencies, achieving 100% removal of TC and ASRB, 94.15% removal of TSS, and 70.38% turbidity reduction under laboratory conditions. Pilot-scale application of this extract resulted in a turbidity reduction of 66.65%. Additional water quality parameters, including total alkalinity (TA), total dissolved solids (TDS), pH, and electrical conductivity (EC), were monitored to evaluate process performance. Overall, the results highlight the strong potential of Cactus leaves as an effective, cost-efficient, and environmentally friendly alternative to conventional chemical coagulants. However, further research is required to enhance their scalability and commercialization. Full article