Search Results (27)

Although cannabis is used in a wide range of fields, including medicine and pharmacology, its use is prohibited in Japan because it contains D⁹-tetrahydrocannabinol (D⁹-THC), a compound that exhibits narcotic effects. While cannabis is primarily detected via color-based screening methods at crime scenes, the reaction products and mechanisms associated with these screening methods have not been fully elucidated. To address this issue, the colored products were isolated via the diazo-coupling reactions of the major cannabinoids (cannabidiol, cannabinol, and D⁹-THC) in cannabis with the Fast Blue RR diazonium salt, and their structures were determined using NMR spectroscopy. As expected, azo compound 2 was formed from cannabidiol, whereas cannabinol and D⁹-THC produced quinoneimines 3 and 4, respectively. This study is expected to lead to the future development of more sensitive color-based reagents that produce fewer false positives. Full article

A series of azo dyes containing eugenol, the major phenolic compound in clove (Syzygium aromaticum) essential oil, was synthesized by coupling reactions of diazonium salts of different amines based on 3-aminobenzoic acid with eugenol. The new eugenol-based azo dyes were fully characterized by the usual analytical techniques and used in preliminary reactive dyeing tests on polyamide fabric to determine the colour fastness and staining under domestic washing conditions. The results obtained revealed the potential of these dyes for applications in the textile area. Full article

A new azo compound was synthesized via an azo coupling reaction between 4-(phenyldiazenyl)benzenediazonium chloride and 8-hydroxyquinoline (8-Hq). The new diazene compound can be used to synthesize metal complexes as a derivative of 8-Hq. The structure of the new compound was characterized using UV–Vis, FT-IR, and 2D NMR spectroscopic methods. Full article

Water-soluble azo derivatives of lignin were synthesized by the azo coupling reaction using organosolv ethanol lignin and diazonium salts based on sulfanilic acid and p-nitroaniline. The structure of azo derivatives of lignin were studied by nuclear magnetic resonance, Fourier-transform infrared spectroscopy, and gel permeation chromatography. It was found that the azobenzene bonds formed in the azo coupling reaction of macromolecules impart the photosensitive properties to the synthesized polymers via cis–trans photoisomerization of the diazobenzene group. It was shown experimentally that the synthesized polymers exhibited good solubility both in the aqueous media in a wide (2–12) pH range and in DMSO and THF organic solvents, which opens up new prospects for their application. Full article

The drug-resistance problem is widely spread and becoming more common in community-acquired and nosocomial strains of bacteria. Therefore, finding new antimicrobial agents remains an important drug target. From this perspective, new derivatives of benzothiazole were synthesized and evaluated for their antimicrobial activity and ability to inhibit the DHPS enzyme. The synthesis was carried out by the reaction of benzothiazole N-arylsulphonylhydrazone with N-aryl-2-cyano-3-(dimethylamino)acrylamide, N-aryl-3-(dimethylamino)prop-2-en-1-one, arylaldehydes or diazonium salt of arylamine derivatives, which led to the formation of N-arylsulfonylpyridones 6a–d (yield 60–70%) and 12a–c (yield 50–60%),N-(2-(benzo[d]thiazole-2-yl)-3-arylacryloyl-4-methylsulfonohydrazide 14a–c (yield 60–65%), 4-(benzo[d]thiazole-2-yl)-5-aryl-1H-pyrazol-3(2H)-one 16a–c (yield 65–75%), and N′-(2-(benzo[d]thiazol-2-yl)-2-(2-arylhydrazono)acetyl)-4-arylsulfonohydrazide 19a–e (yield 85–70%). The antimicrobial evaluations resulted into a variety of microbial activities against the tested strains. Most compounds showed antimicrobial activity against S. aureus with an MIC range of 0.025 to 2.609 mM. The most active compound, 16c, exhibited superior activity against the S. aureus strain with an of MIC 0.025 mM among all tested compounds, outperforming both standard drugs ampicillin and sulfadiazine. The physicochemical–pharmacokinetic properties of the synthesized compounds were studied, and it was discovered that some compounds do not violate rule of five and have good bioavailability and drug-likeness scores. The five antimicrobial potent compounds with good physicochemical–pharmacokinetic properties were then examined for their inhibition of DHPS enzyme. According to the finding, three compounds, 16a–c, had IC₅₀ values comparable to the standard drug and revealed that compound 16b was the most active compound with an IC₅₀ value of 7.85 μg/mL, which is comparable to that of sulfadiazine (standard drug) with an IC₅₀ value of 7.13 μg/mL. A docking study was performed to better understand the interaction of potent compounds with the binding sites of the DHPS enzyme, which revealed that compounds 16a–c are linked by two arene-H interactions with Lys220 within the PABA pocket. Full article

Sulphonamide motif is found extensively in numerous chemotherapeutic drug candidates, it acts by stopping the production of folate inside the bacterial cell. Current research has established the synthesis and characterization of new bioprecursor prodrugs of sulfadiazine. The first prodrug, 3, was synthesized via the coupling of diazonium salt of sulfadiazine with ethyl acetoacetate in AcONa at 0 °C. The second prodrug, sulfadiazine-pyrazole, 5, was furnished via cyclocondensation of the hydrazono derivative, 3, and 2-pyridyl hydrazine, 4. The generated data from the X-ray analysis is interpreted and refined to obtain the crystal structure of the target compound, 5. Density functional theory (DFT) method was used to calculate the optimized geometrical parameters, electronic state (HOMO–LUMO), and the electronic properties. Moreover, Hirshfeld analysis revealed that the most important contributions to the crystal packing of the prodrug 5 are H···H, O···H and H···C contacts. Full article

A family of oxazaborines, diazaborinones, triazaborines, and triazaborinones was prepared by reaction of polarized ethylenes, such as β-enaminoamides, with 4-methylbenzenediazonium tetraphenylborates. The reaction conditions (stirring in CH₂Cl₂ at room temperature (Method A) or stirring with CH₃COONa in CH₂Cl₂ at room temperature (Method B) or refluxing in the CH₂Cl₂/toluene mixture (Method C)) controlled the formation and relative content of these compounds in the reaction mixtures from one to three products. Substituted oxazaborines gradually rearranged into diazaborinones at 250 °C. The prepared compounds were characterized by ¹H NMR, ¹³C NMR, IR, and UV–Vis spectroscopy, HRMS, or microanalysis. The structure of individual compounds was confirmed by ¹¹B NMR, ¹⁵N NMR, 1D NOESY, and X-ray analysis. The mechanism of reaction of enaminoamides with 4-methylbenzenediazonium tetraphenylborate was proposed. Full article

The functionalization of carbon nanotubes by polymers necessitates two steps, first their modification by oxidizing them or by covalently attaching small compounds to them, then the growth of the polymer chains from these anchors or their grafting onto them. In order to better control the process and the rate of functionalization, we develop polymers able to covalently react with the carbon nanotubes by their side chains in one step. We describe the synthesis of a copolymer of dodecylthiophene and its analogue bearing an aniline group at the end of the dodecyl side chain. This copolymer can functionalize single-walled carbon nanotubes (SWNTs) non-covalently and disperse more SWNTs than its hexyl analogues. UV-Vis and fluorescence spectroscopies show that in these non-covalent hybrids, the polymer forms p-stacked aggregates on the SWNTs. The non-covalent hybrids can be transformed into covalent ones by diazonium coupling. In these covalent hybrids the polymer is no longer p-stacked. According to Raman spectroscopy, the conformation of the poly(3-hexylthiophene) backbone is more ordered in the non-covalent hybrids than in the covalent ones. Full article

A new azo compound was prepared via the azo coupling reaction between 4-(ethoxycarbonyl)-3-methyl-1H-pyrazole-5-diazonium chloride and 8-hydroxyquinoline (oxine). The ester functional group of the obtained compound was hydrolyzed and thus a new chemical structure with a carboxylic functional group resulted. The structures of the new compounds were fully characterized by: UV–Vis, FT-IR, 1D and 2D NMR spectroscopy, and HRMS spectrometry. Full article

Highly sensitive multicomponent materials designed for the recognition of hazardous compounds request control over interfacial chemistry. The latter is a key parameter in the construction of the sensing (macro) molecular architectures. In this work, multi-walled carbon nanotubes (CNTs) were deposited on diazonium-modified, flexible indium tin oxide (ITO) electrodes prior to the electropolymerization of pyrrole. This three-step process, including diazonium electroreduction, the deposition of CNTs and electropolymerization, provided adhesively-bonded, polypyrrole-wrapped CNT composite coatings on aminophenyl-modified flexible ITO sheets. The aminophenyl (AP) groups were attached to ITO by electroreduction of the in-situ generated aminobenzenediazonium compound in aqueous, acidic medium. For the first time, polypyrrole (PPy) was electrodeposited in the presence of both benzenesulfonic acid (dopant) and ethylene glycol-bis(2-aminoethylether)-tetraacetic acid (EGTA), which acts as a chelator. The flexible electrodes were characterized by XPS, Raman and scanning electron microscopy (SEM), which provided strong supporting evidence for the wrapping of CNTs by the electrodeposited PPy. Indeed, the CNT average diameter increased from 18 ± 2.6 nm to 27 ± 4.8, 35.6 ± 5.9 and 175 ± 20.1 after 1, 5 and 10 of electropolymerization of pyrrole, respectively. The PPy/CNT/NH₂-ITO films generated by this strategy exhibit significantly improved stability and higher conductivity compared to a similar PPy coating without any embedded CNTs, as assessed by from electrochemical impedance spectroscopy measurements. The potentiometric response was linear in the 10⁻⁸–3 × 10⁻⁷ mol L⁻¹ Pb(II) concentration range, and the detection limit was 2.9 × 10⁻⁹ mol L⁻¹ at S/N = 3. The EGTA was found to drastically improve selectivity for Pb(II) over Cu(II). To account for this improvement, the density functional theory (DFT) was employed to calculate the EGTA–metal ion interaction energy, which was found to be −374.6 and −116.4 kJ/mol for Pb(II) and Cu(II), respectively, considering solvation effects. This work demonstrates the power of a subtle combination of diazonium coupling agent, CNTs, chelators and conductive polymers to design high-performance electrochemical sensors for environmental applications. Full article

A simple general synthesis of 1-aryl-6-azaisocytosine-5-carbonitriles 4 is described. This method is based on coupling diazonium salts with cyanoacetylcyanamide 2 and then cyclization of the formed 2-arylhydrazono-2-cyanoacetylcyanamides 3. The 6-azaisocytosines 4 were studied with respect to tautomeric equilibrium and the transformation of functional groups, and used in the synthesis of the condensed heterocyclic compounds: Purine isosteric imidazo[2,1-c]-[1,2,4]triazine 8 and the 1,2,4-triazino[2,3-a]quinazolines 9–12. Full article

Massive industrial and agricultural developments have led to adverse effects of environmental pollution resisting conventional treatment processes. The issue can be addressed via heterogeneous photocatalysis as witnessed recently. Herein, we have developed novel metal/semi-conductor/polymer nanocomposite for the catalyzed degradation and mineralization of a model organic dye pollutant in darkness. RuO₂-TiO₂ mixed oxide nanoparticles (NPs) were modified with diphenyl amino (DPA) groups from the 4-diphenylamine diazonium salt precursor. The latter was reduced with ascorbic acid to provide radicals that modified the NPs and further served for in situ synthesis of polyaniline (PANI) that resulted in RuO₂/TiO₂-DPA-PANI nanocomposite catalyst. Excellent adhesion of PANI to RuO₂/TiO₂-DPA was noted but not in the case of the bare mixed oxide. This stresses the central role of diazonium compounds to tether PANI to the underlying mixed oxide. RuO₂-TiO₂/DPA/PANI nanocomposite revealed superior catalytic properties in the degradation of Methyl Orange (MO) compared to RuO₂-TiO₂/PANI and RuO₂-TiO₂. Interestingly, it is active even in the darkness due to high PANI mass loading. In addition, PANI constitutes a protective layer of RuO₂-TiO₂ NPs that permitted us to reuse the RuO₂-TiO₂/DPA/PANI nanocomposite nine times, whereas RuO₂-TiO₂/PANI and RuO₂-TiO₂ were reused seven and five times only, respectively. The electronic displacements at the interface of the heterojunction metal/semi-conductor under visible light and the synergistic effects between PANI and RuO₂ result in the separation of electron-hole pairs and a reduction of its recombination rate as well as a significant catalytic activity of RuO₂-TiO₂/DPA/PANI under simulated sunlight and in the dark, respectively. Full article

A novel series of pyrazolyl 1,3,4-thiadiazines 5a–c, 8a–c, 12, 15a–c, 17a–c, and 20 was prepared from the reaction of pyrazole-1-carbothiohydrazide 1a,b with 2-oxo-N′-arylpropanehydrazonoyl chloride, 2-chloro-2-(2-arylhydrazono)acetate, and 3-bromoacetylcoumarin. Moreover, the regioselective reaction of 5-pyrazolone-1-carbothiohydrazide 1a with 4-substituted diazonium salts and 4-(dimethylamino)benzaldehyde gave the corresponding hydrazones 21a–c and 22. The newly prepared compounds were characterized by spectroscopy and elemental analysis. Many new synthesized compounds showed considerable antimicrobial activity against tested microorganisms. Hydrazones 21a–c and 22 showed remarkable antibacterial and antifungal activities. 4-(2-(p-tolyl)hydrazineylidene)-pyrazole-1-carbothiohydrazide 21a displayed the highest antibacterial and antifungal activities with minimum inhibitory concentration (MIC) values lower than standard drugs chloramphenicol and clotrimazole, in the range of 62.5–125 and 2.9–7.8 µg/mL, respectively. Full article

Adhesion of polymers to surfaces is of the upmost importance in timely applications such as protective coatings, biomaterials, sensors, new power sources and soft electronics. In this context, this work examines the role of molecular interactions in the adhesion of polypyrrole thin films to flexible Indium Tin Oxide (ITO) electrodes grafted with aryl layers from various diazonium salts, namely 4-carboxybenzenediazonium (ITO-CO₂H), 4-sulfonicbenzenediazonium (ITO-SO₃H), 4-N,N-dimethylbenzenediazonium (ITO-N(CH₃)₂), 4-aminobenzenediazonium (ITO-NH₂), 4-cyanobenzenediazonium (ITO-CN) and 4-N-phenylbenzenediazonium (ITO-NHPh). It was demonstrated that PPy thin layers were adherent to all aryl-modified surfaces, whereas adhesive failure was noted for bare ITO following simple solvent washing or sonication. Adhesion of polypyrrole was investigated in terms of hydrophilic/hydrophobic character of the underlying aryl layer as probed by contact angle measurements. It was found that sulfonic acid-doped polypyrrole (PPy-BSA) thin films were preferably deposited on the most hydrophobic surfaces. More importantly, the redox properties and electrochemical impedance of PPy were closely related to the hydrophobic character of the aryl layers. This work demonstrates that diazonium compounds are unique molecular glues for conductive polymers and permit to tune their interfacial properties. With robust, diazonium-based architectured interfaces, one can design high performance materials for e.g., sensors, printed soft electronics and flexible thermoelectrics. Full article

Diazocoupling reaction of curcumin with different diazonium salts of p-toluidine, 2-aminopyridine, and 4-aminoantipyrine in pyridine yielded the arylhydrazones 2a–c. Arylhydrazone of p-toluidine reacted with urea, thiourea, and guanidine nitrate to produce 5,6-dihydropyrimidines. Further reaction of 2a with 2,3-diaminopyrdine in sodium ethoxide solution yielded 1H-pyrido[2,3-b][1,4]diazepine derivative. Bis(2,5-dihydroisoxazole) is obtained from the reaction of 2a with hydroxylamine hydrochloride, while its reactions with hydrazines afforded the respective 4,5-dihydro-1H-pyrazoles. The target compounds were evaluated as antioxidant and antibacterial agents. The tested compounds showed good to moderate activities compared to ascorbic acid and chloramphenicol, respectively. Full article