Search Results (1,030)

Using waste biomass as a raw material for the combined production of electricity and heat offers corresponding energy, economic, environmental and resource efficiency benefits. The study examines both the performance of a system for combined energy production based on the Organic Rankine Cycle (ORC) utilizing wood biomass and the market interest in its deployment within Bulgaria. Its objective is to propose a technically and economically viable solution for the recovery of waste biomass through the combined production of electricity and heat while simultaneously assessing the readiness of industrial and municipal sectors to adopt such systems. The cogeneration plant incorporates an ORC module enhanced with three additional economizers that capture residual heat from flue gases. Operating on 2 t/h of biomass, the system delivers 1156 kW of electric power and 3660 kW of thermal energy, recovering an additional 2664 kW of heat. The overall energy efficiency reaches 85%, with projected annual revenues exceeding EUR 600,000 and a reduction in carbon dioxide emissions of over 5800 t/yr. These indicators can be achieved through optimal installation and operation. When operating at a reduced load, however, the specific fuel consumption increases and the overall efficiency of the installation decreases. The marketing survey results indicate that 75% of respondents express interest in adopting such technologies, contingent upon the availability of financial incentives. The strongest demand is observed for systems with capacities up to 1000 kW. However, significant barriers remain, including high initial investment costs and uneven access to raw materials. The findings confirm that the developed system offers a technologically robust, environmentally efficient and market-relevant solution, aligned with the goals of energy independence, sustainability and the transition to a low-carbon economy. Full article

Mangoes are an important part of Hainan’s tropical characteristic agriculture. In response to the requirements of building an ecological civilization pilot demonstration zone in Hainan, China, green and sustainable development will be the future development trend of the mango planting system. However, the economic benefits and environmental impact during its planting and management process remain unclear. This paper combines emergy, life cycle assessment (LCA), and economic analysis to compare the system sustainability, environmental impact, and economic benefits of the traditional mango cultivation system (TM) in Dongfang City, Hainan Province, and the early-maturing mango cultivation system (EM) in Sanya City. The emergy evaluation results show that the total emergy input of EM (1.37 × 10¹⁶ sej ha⁻¹) was higher than that of TM (1.32 × 10¹⁶ sej ha⁻¹). From the perspective of the emergy index, compared with TM, EM exerted less pressure on the local environment and has better stability and sustainability. This was due to the higher input of renewable resources in EM. The LCA results showed that based on mass as the functional unit, the potential environmental impact of the EM is relatively high, and its total environmental impact index was 18.67–33.19% higher than that of the TM. Fertilizer input and On-Farm emissions were the main factors causing environmental consequences. Choosing alternative fertilizers that have a smaller impact on the environment may effectively reduce the environmental impact of the system. The economic analysis results showed that due to the higher selling price of early-maturing mango, the total profit and cost–benefit ratio of the EM have increased by 55.84% and 36.87%, respectively, compared with the TM. These results indicated that EM in Sanya City can enhance environmental sustainability and boost producers’ annual income, but attention should be paid to the negative environmental impact of excessive fertilizer input. These findings offer insights into optimizing agricultural inputs for Hainan mango production to mitigate multiple environmental impacts while enhancing economic benefits, aiming to provide theoretical support for promoting the sustainable development of the Hainan mango industry. Full article

Background: Pain is a complex phenomenon characterized by unpleasant experiences with profound heterogeneity influenced by biological, psychological, and social factors. According to the National Health Interview Survey, 50.2 million U.S. adults (20.5%) experience pain on most days, with the annual cost of prescription medication for pain reaching approximately USD 17.8 billion. Theranostic pain nanomedicine therefore emerges as an attractive analgesic strategy with the potential for increased efficacy, reduced side-effects, and treatment personalization. Theranostic nanomedicine combines drug delivery and diagnostic features, allowing for real-time monitoring of analgesic efficacy in vivo using molecular imaging. However, clinical translation of these nanomedicines are challenging due to complex manufacturing methodologies, lack of standardized quality control, and potentially high costs. Quality by Design (QbD) can navigate these challenges and lead to the development of an optimal pain nanomedicine. Our lab previously reported a macrophage-targeted perfluorocarbon nanoemulsion (PFC NE) that demonstrated analgesic efficacy across multiple rodent pain models in both sexes. Here, we report PFC-free, biphasic nanoemulsions formulated with a biocompatible and non-immunogenic plant-based coconut oil loaded with a COX-2 inhibitor and a clinical-grade, indocyanine green (ICG) near-infrared fluorescent (NIRF) dye for parenteral theranostic analgesic nanomedicine. Methods: Critical process parameters and material attributes were identified through the FMECA (Failure, Modes, Effects, and Criticality Analysis) method and optimized using a 3 × 2 full-factorial design of experiments. We investigated the impact of the oil-to-surfactant ratio (w/w) with three different surfactant systems on the colloidal properties of NE. Small-scale (100 mL) batches were manufactured using sonication and microfluidization, and the final formulation was scaled up to 500 mL with microfluidization. The colloidal stability of NE was assessed using dynamic light scattering (DLS) and drug quantification was conducted through reverse-phase HPLC. An in vitro drug release study was conducted using the dialysis bag method, accompanied by HPLC quantification. The formulation was further evaluated for cell viability, cellular uptake, and COX-2 inhibition in the RAW 264.7 macrophage cell line. Results: Nanoemulsion droplet size increased with a higher oil-to-surfactant ratio (w/w) but was no significant impact by the type of surfactant system used. Thermal cycling and serum stability studies confirmed NE colloidal stability upon exposure to high and low temperatures and biological fluids. We also demonstrated the necessity of a solubilizer for long-term fluorescence stability of ICG. The nanoemulsion showed no cellular toxicity and effectively inhibited PGE2 in activated macrophages. Conclusions: To our knowledge, this is the first instance of a celecoxib-loaded theranostic platform developed using a plant-derived hydrocarbon oil, applying the QbD approach that demonstrated COX-2 inhibition. Full article

Soil bacteria drive biogeochemical cycles and influence disease suppression, playing pivotal roles in sustainable agriculture. Using Illumina MiSeq sequencing, we assessed how six ridge-furrow film mulching patterns affect soil bacterial diversity in a continuous potato system. The Shannon index showed significantly higher diversity in fully mulched treatments (T2–T3) versus controls (CK), suggesting mulching enhances microbial community richness. This result suggests that complete mulching combined with ridge planting (T2) may significantly enhance bacterial proliferation in soil. The bacterial communities were predominantly composed of Acidobacteria, Pseudomonadota, Bacteroidota, Chloroflexota, and Planctomycetota. Among these, Acidobacteria showed the highest abundance, with ridge planting patterns favoring greater Acidobacteria richness compared to furrow planting. In contrast, Pseudomonadota exhibited higher abundance under half-mulching conditions than under complete mulching. At class level, Acidobacteria and Proteobacteria emerged as the most abundant groups, with Proteobacteria constituting 22.6–35.7% of total microbial populations. Notably, Proteobacteria demonstrated particular dominance under the complete mulching with ridge planting pattern (T2). At the genus level, Subgroup_6_norank represented the most dominant taxon among the 439 identified bacterial genera, accounting for 14.0–20.2% of communities across all treatments, with half-mulching ridge planting (T4) showing the highest relative abundance. Our findings demonstrate that different ridge-furrow film mulching patterns significantly influence soil microbial diversity. While traditional non-mulched (CK) and mulched flat plots (T1) exhibited similar impacts on bacterial community structure, other treatments displayed distinct taxonomic profiles. Complete mulching patterns, particularly ridge planting (T2), appear most conducive to microbial development, suggesting their potential to enhance soil biogeochemical cycling in continuous cropping systems. These results provide valuable insights for optimizing mulching practices to improve soil health in agricultural ecosystems. Full article

This article presents a review of several non-exclusive pathways for the sequestration of soil organic carbon, which can be classified into two large classical groups: the modification of plant and microbial macromolecules and the abiotic and microbial neoformation of humic substances. Classical studies have established a causal relationship between aromatic structures and the stability of soil humus (traditional hypotheses regarding lignin and aromatic microbial metabolites as primary precursors for soil organic matter). However, further evidence has emerged that underscores the significance of humification mechanisms based solely on aliphatics. The precursors may be carbohydrates, which may be transformed by the effects of fire or catalytic dehydration reactions in soil. Furthermore, humic-type structures may be formed through the condensation of unsaturated fatty acids or the alteration of aliphatic biomacromolecules, such as cutins, suberins, and non-hydrolysable plant polyesters. In addition to the intrinsic value of understanding the potential for carbon sequestration in diverse soil types, biogeochemical models of the carbon cycle necessitate the assessment of the total quantity, nature, provenance, and resilience of the sequestered organic matter. This emphasises the necessity of applying specific techniques to gain insights into their molecular structures. The application of appropriate analytical techniques to soil organic matter, including sequential chemolysis or thermal degradation combined with isotopic analysis and high-resolution mass spectrometry, derivative spectroscopy (visible and infrared), or ¹³C magnetic resonance after selective degradation, enables the simultaneous assessment of the concurrent biophysicochemical stabilisation mechanisms of C in soils. Full article

Fusaric acid (FSA) is a mycotoxin produced by pathogenic Fusarium species that inhibits the growth of various beneficial microbes. In this study, we investigated the molecular mechanisms by which Trichoderma harzianum NJAU4742 (Th), a beneficial fungus, responds to FSA-induced stress. Here, by combining a transcriptome analysis, a gene knockout, and physiological data measurements, our study investigated the molecular mechanisms underlying the response of Trichoderma harzianum NJAU4742 (Th) to FSA stress. The results showed that FSA can induce severe oxidative stress in Th, and an aldehyde dehydrogenase (Thaldh3) in Th plays a critical role in alleviating FSA stress. Deleting Thaldh3 significantly decreased the γ-aminobutyrate (GABA) content, causing more severe oxidative damage in Th. Furthermore, we also provide evidence demonstrating that Thaldh3 alleviates FSA stress by enhancing the activities of key enzymes involved in the tricarboxylic acid cycle and ATP content. A pot experiment showed that an enhanced tolerance to FSA increased the Th biomass, strengthening its antagonistic capacity against pathogens and reducing the disease index in tomatoes. In conclusion, these observations provide new insight into the role of beneficial microbes in promoting plant health. Full article

Straw returning inhibits tillering at the early stage of rice growth and thus affects grain yield. Sulfur-coated urea (SCU) has been expected to increase nitrogen use efficiency (NUE) and yield, save labor input, and reduce environmental pollution in crop production. Nevertheless, the sulfur coatings of SCU are easy to break and then shorten the nutrient release cycle. Whether there was a complementary effect between straw returning and SCU in NUE and grain yield had remained elusive. To investigate the effects of straw returning combined with the application of SCU on NUE and rice yield, a two-year field experiment was conducted from 2022 to 2023 with three treatments (straw returning combined with conventional urea (SRU), no straw returning combined with SCU (NRS), straw returning combined with SCU (SRS)). We found that straw returning combined with the application of SCU increased rice yield and NUE significantly. Compared with SRU and NRS, SRS treatments significantly increased grain yield by 14.61–16.22%, and 4.14–7.35%, respectively. Higher effective panicle numbers per m² and grain numbers per panicle were recorded in NRS and SRS treatments than SRU. SRS treatment increased nitrogen recovery efficiency by 79.53% and 22.97%, nitrogen agronomic efficiency by 18.68% and 17.37%, and nitrogen partial factor productivity by 10.51% and 9.81% compared with SRU and NRS treatment, respectively. The enhanced NUE in SRS was driven by higher leaf area index, SPAD value, net photosynthetic rate, carbon metabolic enzyme (RuBP and SPS) activity, nitrogen metabolic enzyme (NR, GS, and GOGAT) activity, sucrose and nitrogen content in leaves, and nitrogen accumulation in plant during grain filling. Moreover, the improved yield in SRS was closely related to superior NUE. In conclusion, straw returning combined with application of SCU boosted grain yield and NUE via enhanced carbon–nitrogen metabolism during the late growth period in rice. Full article

Cancer is a major cause of morbidity and mortality across the globe, with a substantial increase in cases anticipated over the next few decades. Given the constraints and adverse effects associated with standard cancer therapies, the contribution of diet and nutraceuticals to cancer prevention and treatment is receiving increased scrutiny. A diet rich in plant-based foods, extra virgin olive oil (EVOO), and bioactive compounds, including the Mediterranean Diet, has been associated with reduced cancer risk and improved treatment outcomes. This review aims to explore the complex mechanisms of the MedDiet and nutraceuticals (polyphenols, flavonoids, terpenoids) in cancer prevention, to determine their potential as cancer treatment adjuvants. Promising results show that key compounds such as bergamot polyphenolic fraction (BPF), cynaropicrin, oleuropein, quercetin, resveratrol, and serotonin can modulate oxidative stress, inflammation, the tumor microenvironment, the cell cycle, and drug resistance. A significant observation is that many of these substances demonstrate dual dose-dependent activity; they function as antioxidants in healthy cells but induce pro-oxidant and pro-apoptotic effects in cancerous cells. Their ability to boost chemotherapy’s effectiveness and safety while lessening side effects and offering combined advantages is also explored. To summarize, this review suggests that the Mediterranean Diet and nutraceutical supplements may help prevent and manage cancer, but more research is needed to confirm their benefits. Full article

Tetragonia tetragonioides, or New Zealand spinach, is a widespread halophyte native to eastern Asia, Australia, and New Zealand, and naturalized in some Mediterranean regions. This underutilized vegetable is consumed for its leaves, raw or cooked. For the first time, we investigated the feasibility of using whole baby plants (including stems and leaves) as raw material for ready-to-eat (RTE) vegetable production. Our study assessed Tetragonia’s suitability for hydroponic cultivation over two cycles (autumn–winter and spring). We investigated the impact of increasing nutrient rates (only water, half-strength, and full-strength nutrient solutions) and plant densities (365, 497, and 615 plants m⁻² in the first trial and 615 and 947 plants m⁻² in the second) on baby plant production. We also analyzed the plants’ morphological and biochemical characteristics, and their viability for cold storage (21 days at 4 °C) as a minimally processed product. Tetragonia adapted well to hydroponic cultivation across both growing periods. Nevertheless, climatic conditions, plant density, and nutrient supply significantly influenced plant growth, yield, nutritional quality, and post-harvest storage. The highest plant density combined with the full-strength nutrient solution resulted in the highest yield, especially during spring (1.8 kg m⁻²), and favorable nutritional characteristics (β-carotene, Vitamin C, Fe, Cu, Mn, and Zn). Furthermore, Tetragonia baby plants proved suitable for minimal processing, maintaining good quality retention for a minimum of 14 days, thus resulting in a viable option for the RTE vegetable market. Full article

The Iridaceae family comprises approximately 1800 species, including Iris pallida Lam., which is widely recognized for its ornamental and aromatic properties and particularly adopted in the perfume industry. In this study, we evaluated the effects of planting density and maturity age on biomass production, morphological traits, rhizome biomass, and orris concrete yield in Iris pallida grown in Tuscany (Italy). The experiment consisted of four agricultural parcels, each one containing six plots arranged to test combinations of two planting densities (low density [LD], 8 plants/m² and high density [HD], 15 plants/m²) and harvesting age (2, 3, and 4 years). Results indicated that planting density significantly influenced biomass variables—including rhizome, bud, and stem biomass—with the low planting density (LD) exhibiting higher total biomass (5.48 ± 0.59 kg/m²) compared to that observed under high planting density (HD) (1.82 ± 0.54 kg/m²). Orris concrete yield varied significantly across planting densities and harvesting age, consistently favoring LD (0.055 ± 0.01%) over HD (0.045 ± 0.01%). Also, orris concrete yield showed a positive correlation with floral stem number (r = 0.73, p < 0.001), root biomass (r = 0.66, p < 0.01) and floral stem biomass (r = 0.63, p < 0.01), while no significant correlations were found between orris concrete yield and total biomass or rhizome biomass. A shorter production cycle under low-density planting may improve orris concrete yield without compromising biomass productivity. Full article

Optimizing water resource utilization is a critical challenge to meet the dramatic increase in food demand. Therefore, continuous studies to minimize water demand for plants are highly needed. This study aims to employ HYDRUS (2D/3D) software to simulate the effects of continuous and intermittent water flow on soil water distribution under a subsurface point source. The constant parameters included loamy sand soil, a water application time of 30 min, and an emitter discharge of 3.41 L/h. The variable parameters consisted are two pipe depths (25 cm and 35 cm), three ratios of ON:OFF times (1ON:1OFF, 1ON:3OFF, and 1ON:5OFF), and five water application cycles (WF1C, WF2C, WF3C, WF4C, and WF5C, with WF1C as for the continuous water flow). The results revealed that, in 30 min of water application, continuous water flow and ON:OFF ratios of 1ON:1OFF and 1ON:3OFF achieved maximum water retention in the vicinity of the emitter. In 60 min, increasing cycles enhanced retention for 1ON:1OFF and 1ON:3OFF, yet the 1ON:5OFF time ratio achieved the highest water content near the emitter. In 120 min, the 1ON:1OFF ratio showed an insignificant effect with cycle variations, but 1ON:3OFF and 1ON:5OFF exhibited increased retention. Similarly, in 180 min, 1ON:1OFF was unaffected by cycles, whereas 1ON:3OFF and 1ON:5OFF significantly improved retention. After 360 min, all treatments displayed equal water retention relative to the emitter position. Also, the results revealed that increasing water application cycles and ON:OFF time ratios lead to more holding soil water content, especially at soil levels of 20, 30, and 40 cm. These results affirm that positioning the emitters line at 25 cm enhances water retention more effectively than at 35 cm. Ultimately, statistical analysis confirmed that the combination of pipe depth, water application cycles, and ON:OFF ratios significantly affects the retention of soil water content in the vicinity of the emitter. Full article

Soil salinization poses a critical threat to global agriculture, necessitating innovative strategies for sustainable remediation. This review synthesizes advances in leveraging plant–microbe interactions to remediate saline–alkali soils, focusing on oilseed crops—Brassica napus, Glycine max, Arachis hypogaea, Helianthus annuus, and Sesamum indicum—as keystone species for ecosystem restoration. These crops exhibit unique adaptive strategies, including root architectural plasticity and exudate-mediated recruitment of stress-resilient microbiomes (Proteobacteria, Actinobacteria, and Ascomycota), which collectively stabilize soil structure and enhance nutrient cycling, ion homeostasis, and soil aggregation to mitigate soil salinity and alkalinity. Emerging technologies further amplify these natural synergies: nanomaterials optimize nutrient delivery and microbial colonization, while artificial intelligence (AI) models predict optimal plant growth-promoting rhizobacteria (PGPR) combinations and simulate remediation outcomes. This integration establishes a roadmap for precision microbiome engineering, offering scalable strategies to restore soil health and ensure food security in saline–alkali ecosystems. Full article

Mixed reality (MR) laboratories combine physical elements with virtual components, providing convenient experiential environments for testing engineering concepts. This article reports the design, validation, and implementation of an MR laboratory for engineering students to practice the implementation of control algorithms in microcontrollers. First, the design of the MR lab is described in detail. In this, a seesaw electromechanical system is emulated, being synchronized with electrical signals that represent sensors’ measurements and actuators’ commands. Thus, a control algorithm implemented by the students in a microcontroller can affect the simulated system in real time. The real seesaw system was used to validate the simulated plant in the MR lab, finding that the same control algorithm effectively controls both the simulated and physical seesaw systems. A practice, designed based on Kolb’s experiential learning cycle, where the students must implement P, PI, and PID controllers in the MR lab, was implemented. A survey was conducted to assess the students’ motivation, and a post-test was administered to evaluate their learning outcomes. Full article

Aeroponics efficiently conserves water and fertilizer but faces energy sustainability challenges in maintaining high productivity and quality. This study aimed to identify critical growth phases of lettuce affected by management modes and assess resource/energy efficiency (cost per unit yield) to inform the development of sustainability strategies for lettuce production in a lettuce-dominant aeroponics system integrated with radish. Three management modes were tested: M1 (constant nutrient solution concentrations), M2 (variable nutrient solution concentrations), and M3 (combined variable nutrient solution concentrations and preharvest short-duration continuous light for 48 h). Plant parameters were dynamically measured in a 30-day cultivation cycle. The results showed that the intercropped lettuce exhibited peak growth at 15–25 days after transplanting, and nutrient solution adjustment enhanced the shoot weight and quality, with synergistic quality improvements under M3. However, preharvest lighting reduced the net photosynthetic rate via stomatal closure and lowered the effective quantum yield of photosystem II, preventing biomass increase. The preharvest short-duration continuous light elevated the soluble protein, ascorbic acid, and soluble sugar contents. For yield-focused systems, M2 alone achieved comparable shoot weight to M3 with higher energy efficiency. However, when simultaneously considering lettuce quality enhancement and the yield boost of radish in the intercropping system, M3 demonstrated potential for greater marginal benefits. Full article

Drought stress is an important abiotic stress factor restricting crop production. Broomcorn millet (Panicum miliaceum L.) has become an ideal material for analyzing the stress adaptation mechanisms of crops due to its strong stress resistance. However, the functional characteristics of its rhizosphere microorganisms in response to drought remain unclear. In this study, metagenomics and metabolomics techniques were employed to systematically analyze the compositional characteristics of the microbial community, functional properties, and changes in metabolites in the rhizosphere soil of broomcorn millet under drought stress. On this basis, an analysis was conducted in combination with the differences in functional pathways. The results showed that the drought treatment during the flowering stage significantly altered the species composition of the rhizosphere microorganisms of broomcorn millet. Among them, the relative abundances of beneficial microorganisms such as Nitrosospira, Coniochaeta, Diversispora, Gigaspora, Glomus, and Rhizophagus increased significantly. Drought stress significantly affects the metabolic pathways of rhizosphere microorganisms. The relative abundances of genes associated with prokaryotes, glycolysis/gluconeogenesis, and other metabolic process (e.g., ribosome biosynthesis, amino sugar and nucleotide sugar metabolism, and fructose and mannose metabolism) increased significantly. Additionally, the expression levels of functional genes involved in the phosphorus cycle were markedly upregulated. Drought stress also significantly alters the content of specific rhizosphere soil metabolites (e.g., trehalose, proline). Under drought conditions, broomcorn millet may stabilize the rhizosphere microbial community by inducing its restructuring and recruiting beneficial fungal groups. These community-level changes can enhance element cycling efficiency, optimize symbiotic interactions between broomcorn millet and rhizosphere microorganisms, and ultimately improve the crop’s drought adaptability. Furthermore, the soil metabolome (e.g., trehalose and proline) functions as a pivotal interfacial mediator, orchestrating the interaction network between broomcorn millet and rhizosphere microorganisms, thereby enhancing plant stress tolerance. This study sheds new light on the functional traits of rhizosphere microbiota under drought stress and their mechanistic interactions with host plants. Full article