Search Results (680)

Exposure to per- and polyfluoroalkyl substances (PFASs) can cause detrimental health effects. The consumption of contaminated food is viewed as a major exposure pathway for humans, but the relationship between agriculture and PFASs has not been investigated thoroughly, and it is becoming a pressing issue since health advisories are continuously being reassessed. This semi-systematic literature review connects the release, environmental fate, and agriculture uptake of PFASs to enhance comprehension and identify knowledge gaps which limit accurate risk assessment. It focuses on the heavily agricultural state of Minnesota, USA, which is representative of the large Midwestern US Corn Belt in terms of agricultural activities, because PFASs have been monitored in Minnesota since the beginning of the 21st century. PFAS contamination is a complex issue due to the over 14,000 individual PFAS compounds which have unique chemical properties that interact differently with air, water, soil, and biological systems. Moreover, the lack of field studies and monitoring of agricultural sites makes accurate risk assessments challenging. Researchers, policymakers, and farmers must work closely together to reduce the risk of PFAS exposure as the understanding of their potential health effects increases and legacy PFASs are displaced with shorter fluorinated replacements. Full article

The contamination of drinking water sources with selenium (Se) oxyanions, including selenite (Se(IV)) and selenate (Se(VI)), contains serious health hazards with an oral intake exceeding 400 µg/day and therefore requires urgent attention. Various natural and anthropogenic sources are responsible for high Se concentrations in aquatic environments. In addition, the chemical behavior and speciation of selenium can vary noticeably depending on the origin of the source water. The Se(VI) oxyanion is more soluble and therefore more abundant in surface water. Se levels in contaminated waters often exceed 50 µg/L and may reach several hundred µg/L, well above drinking water limits set by the World Health Organization (40 µg/L) and Germany (10 µg/L), as well as typical industrial discharge limits (5–10 µg/L). Overall, Se is difficult to remove using conventionally available physical, chemical, and biological treatment technologies. The recent literature has therefore highlighted promising advancements in Se removal using emerging technologies. These include advanced physical separation methods such as membrane-based treatment systems and engineered nanomaterials for selective Se decontamination. Additionally, other integrated approaches incorporating photocatalysis coupled adsorption processes, and bio-electrochemical systems have also demonstrated high efficiency in redox transformation and capturing of Se from contaminated water bodies. These innovative strategies may offer enhanced selectivity, removal, and recovery potential for Se-containing species. Here, a current review outlines the sources, distribution, and chemical behavior of Se in natural waters, along with its toxicity and associated health risks. It also provides a broad and multi-perspective assessment of conventional as well as emerging physical, chemical, and biological approaches for Se removal and/or recovery with further prospects for integrated and sustainable strategies. Full article

The presence of plastics in the soil environment is an undeniable global reality. Biodegradable plastics (BPs) possess several key properties that make them more environmentally sustainable compared to other categories of plastics. However, their presence induces significant changes in soil systems health where they are found, due to a combination of environmental, soil, and climatic factors, as well as the simultaneous presence of other pollutants, both inorganic and organic. In the present work, a review has been conducted on published research findings regarding the impact of various types of BPs on the parameters that regulate and determine soil health. In particular, the study examined the effects of BPs on physical, chemical, and biological indices of soil quality, leading to several important conclusions. It was observed that silty and loamy soils were significantly affected, as their physical properties were altered. Moreover, significant changes in both chemical and microbiological indicators were observed with increasing environmental temperatures. The presence of all types of biodegradable microplastics led to a significant reduction in soil nitrogen content as temperature increased. This study highlights the profound effects of the climate crisis on the properties of soils already contaminated with plastics, as the effects of rising temperatures on soil properties appear to be amplified in the presence of plastics. On the other hand, higher temperatures also trigger a series of chemical reactions that accelerate the degradation of BPs, thereby reducing their volume and mass in the soil environment. These processes lead to increased emissions of gases and higher ambient temperatures, leading to global warming. The types and quantities of plastics present, along with the environmental changes in a study area, are critical factors that must be taken into account by policymakers in order to mitigate the impacts of climate change on soil health and productivity. Full article

This study provides an up-to-date assessment of the environmental status in the area of the S/s Stuttgart wreck in the southern Baltic Sea, focusing on macrozoobenthos, sediment chemistry, and contamination in Mytilus trossulus soft tissues. Comparative analyses from 2016 and 2023 revealed increased species richness and distinct benthic assemblages, shaped primarily by depth and distance from the wreck. Among macrozoobenthos, there dominated opportunistic species, characterized by a high degree of resistance to the unfavorable state of the environment, suggesting adaptation to local conditions. Elevated concentrations of heavy metals were detected in sediments, with maximum values of Cd—0.85 mg·kg⁻¹, Cu—34 mg·kg⁻¹, Zn—119 mg·kg⁻¹, and Ni—32.3 mg·kg⁻¹. However, no significant correlations between sediment contamination and macrozoobenthos composition were found. In Mytilus trossulus, contaminant levels were mostly within regulatory limits; however, mercury concentrations reached 0.069 mg·kg⁻¹ wet weight near the wreck and 0.493 mg·kg⁻¹ at the reference station, both exceeding the threshold defined in national legislation (0.02 mg·kg⁻¹) (Journal of Laws of 2021, item 568). Condition indices for Macoma balthica were lower in the wreck area, suggesting sublethal stress. Ecotoxicological tests showed no acute toxicity in most sediment samples, emphasizing the complexity of pollutant effects. The data presented here not only enrich the existing literature on marine pollution but also contribute to the development of more effective environmental protection strategies for marine ecosystems under international protection. Full article

Food safety plays an important and fundamental role, primarily for human health and certainly for the food industry. In this context, developing efficient, highly sensitive, safe, inexpensive, and fast analytical methods for determining chemical and biological contaminants, such as electrochemical (bio)sensors, is crucial. The development of innovative and high-performance electrochemical (bio)sensors can significantly support food chain monitoring. In this review, we have surveyed and analyzed the latest examples of electrochemical (bio)sensors for the analysis of some common biological contaminants, such as toxins and pathogenic bacteria and chemical contaminants, such as pesticides, and antibiotics. Full article

Microbial contamination of hatching eggs often leads to reduced hatchability and poor chick quality. As trimethylamine (TMA), a metabolite derived from dietary choline, has antimicrobial properties, increasing yolk TMA contents may increase bacterial resistance to eggs; however, the effects of TMA concentrations on chick quality remain unknown. Hence, this study was conducted to determine the effects of yolk TMA concentrations on the hatchability and chick quality of dwarf hens with different FMO3 genotypes. Hens (n = 140) were divided into control and experimental groups; the latter received choline chloride (2800 mg/kg) to elevate their yolk TMA concentrations. The TMA content, Pasgar score, hatchability, and post-hatching performance were evaluated. The results showed that choline supplementation significantly increased TMA concentrations in hens with AT and TT genotypes. Higher yolk TMA concentrations (≥4 µg/g) correlated with improved Pasgar scores and reduced abnormalities in vitality, navel, and yolk sac absorption. Hatchability peaked at 6.49 µg/g TMA, suggesting a threshold effect. Although the growth rate remained unaffected, chick mortality decreased in the high-TMA group. Therefore, moderate TMA concentrations can enhance egg antimicrobial defenses and improve reproductive performance. This strategy provides a biologically grounded alternative to traditional chemical disinfection in hatcheries. Full article

The risk of contamination of the vital resource of water continues to increase and represents an urgent problem for modern society. Globalisation, industrialisation and technological progress have led to the need to treat more and more wastewater streams before they can be released into the environment. A high chemical and biochemical oxygen demand as well as the sum of dissolved and suspended organic and inorganic components are the main characteristics of highly contaminated wastewater. Research into environmentally friendly and sustainable technologies is becoming increasingly important in wastewater treatment. Bioremediation utilises the ability to restore the biogenic elements of the environment and is an environmentally friendly method for removing contaminants from the surrounding ecosystem. Forming microbial consortia that exhibit both excellent biosorption properties and a high resistance to toxic conditions is crucial for the biodegradation of complicated systems, such as highly contaminated wastewater. The development of systematic biological molecular tools can further improve the bioremediation process. By integrating innovative technologies with the already existing natural microbial capacity, it is possible to further improve the sustainability of biological treatments of wastewater streams while preserving the natural environment. Full article

Climate change, soil degradation, and the spread of seed-borne pathogens pose serious challenges to global food security and agricultural sustainability. Although chemical seed treatment provides pathogen control, it poses environmental and health risks. This review analyses innovative seed treatment technologies, with particular emphasis on ozonation as an ecologically viable alternative. The mechanisms of action of ozone, its effects on seed germination, reduction of microbial contamination, and crop establishment are discussed. Chemical, physical, and biological treatment methods are comparatively evaluated, analyzing their effectiveness, environmental impact, and application limitations. Full article

Aflatoxins, toxic secondary metabolites produced primarily by Aspergillus flavus and Aspergillus parasiticus, pose a significant global health concern due to their frequent presence in crops, food, and feed—especially under climate change conditions. This review addresses the growing threat of aflatoxins by analyzing recent advances in detection and mitigation. A comprehensive literature review was conducted, focusing on bioremediation, physical and chemical detoxification, and fungal growth inhibition strategies. The occurrence of aflatoxins in water systems was also examined, along with current detection techniques, removal processes, and regulatory frameworks. Emerging technologies such as molecular diagnostics, immunoassays, biosensors, and chromatographic methods are discussed for their potential to improve monitoring and control. Key findings highlight the increasing efficacy of integrative approaches combining biological and technological solutions and the potential of AI-based tools and portable devices for on-site detection. Intelligent packaging and transgenic crops are also explored for their role in minimizing contamination at the source. Overall, this review emphasizes the importance of continued interdisciplinary research and the development of sustainable, adaptive strategies to mitigate aflatoxin risks, thereby supporting food safety and public health in the face of environmental challenges. Full article

Background: Informal electronic waste (e-waste) recycling practices release a complex mixture of pollutants, particularly heavy metals, into the environment. Chronic exposure to these contaminants has been linked to a range of health risks, but the molecular underpinnings remain poorly understood. In this study, we investigated the alterations in metabolic profiles due to e-waste exposure and linked these metabolites to systemic biological effects. Methods: We applied untargeted high-resolution metabolomics using dual-column LC-MS/MS and a multi-step analysis workflow combining MS1 feature detection, MS2 annotation, and chemical ontology classification, to characterize urinary metabolic alterations in 91 e-waste workers and 51 community controls associated with the Agbogbloshie site (Accra, Ghana). The impacts of heavy metal exposure in e-waste workers were assessed by establishing linear regression and four-parameter logistic (4PL) models between heavy metal levels and metabolite concentrations. Results: Significant metal-associated metabolomic changes were identified. Both linear and nonlinear models revealed distinct sets of exposure-responsive compounds, highlighting diverse biological responses. Ontology-informed annotation revealed systemic effects on lipid metabolism, oxidative stress pathways, and xenobiotic biotransformation. This study demonstrates how integrating chemical ontology and nonlinear modeling facilitates exposome interpretation in complex environments and provides a scalable template for environmental biomarker discovery. Conclusions: Integrating dose–response modeling and chemical ontology analysis enables robust interpretation of exposomics datasets when direct compound identification is limited. Our findings indicate that e-waste exposure induces systemic metabolic alterations that can underlie health risks and diseases. Full article

Soil microplastic pollution poses a significant threat to the integrity of terrestrial ecosystems and agricultural sustainability. This review provides a comprehensive synthesis of recent progress on soil microplastic (MP) sources, ecological impacts, and separation technologies. Agricultural practices (e.g., residual plastic mulch and wastewater irrigation) and atmospheric deposition serve as primary drivers of contamination accumulation, with pronounced spatial heterogeneity observed across regions. Predominant MP types such as polyethylene, polystyrene, and polypropylene disrupt soil structure and biogeochemical processes through three core mechanisms: physical interference, chemical toxicity, and biological accumulation. These particles further form carrier–pollutant complexes, exacerbating ecotoxicological impacts across trophic levels. While emerging separation techniques like magnetic separation and solvent extraction demonstrate enhanced efficiency, their implementation faces challenges stemming from soil matrix complexity and high operational costs. This article underscores the need for global collaborative efforts to accelerate innovation in biodegradable polymers, offering practical pathways for sustainable soil management. Full article

Small-particle-produced goods, such as those used in industry, medicine, cosmetics, paints, abrasives, and plastic pellets or powders, are the main sources of microplastics. It is also possible to mention tire recycling granules here. Larger components break down in the environment to generate secondary microplastics. Microplastics, or particles smaller than 5 mm, and nanoplastics, or particles smaller than 1 μm, are the products of degradation and, in particular, disintegration processes that occur in nature as a result of several physical, chemical, and biological variables. Polypropylene, polyethylene, polyvinyl chloride (PVC), polystyrene, polyurethane, and polyethylene terephthalate (PET) are among the chemicals included in this contamination in decreasing order of quantity. Micro- and nanoplastics have been detected in the air, water, and soil, confirming their ubiquitous presence in natural environments. Their widespread distribution poses significant threats to human health, including oxidative stress, inflammation, cellular damage, and potential carcinogenic effects. The aim of this article is to review the current literature on the occurrence of micro- and nanoplastics in various environmental compartments and to analyze the associated health consequences. The article also discusses existing legal regulations and highlights the urgent need for intensified research into the toxicological mechanisms of microplastics and the development of more effective strategies for their mitigation. Full article

Saxitoxin (STX) is a potent toxin produced by marine dinoflagellates and freshwater or brackish water cyanobacteria, and is a member of the paralytic shellfish toxins (PSTs). As a highly specific blocker of voltage-gated sodium channels (NaVs), STX blocks sodium ion influx, thereby inhibiting nerve impulse transmission and leading to systemic physiological dysfunctions in the nervous, respiratory, cardiovascular, and digestive systems. Severe exposure can lead to paralysis, respiratory failure, and mortality. STX primarily enters the human body through the consumption of contaminated shellfish, posing a significant public health risk as the causative agent of paralytic shellfish poisoning (PSP). Beyond its acute toxicity, STX exerts cascading impacts on food safety, marine ecosystem integrity, and economic stability, particularly in regions affected by harmful algal blooms (HABs). Moreover, the complex molecular structure of STX—tricyclic skeleton and biguanide group—and its diverse analogs (more than 50 derivatives) have made it the focus of research on natural toxins. In this review, we traced the discovery history, chemical structure, molecular biosynthesis, biological enrichment mechanisms, and toxicological actions of STX. Moreover, we highlighted recent advancements in the potential for detection and treatment strategies of STX. By integrating multidisciplinary insights, this review aims to provide a holistic understanding of STX and to guide future research directions for its prevention, management, and potential applications. Full article

Microplastic (MP) contamination is a growing environmental concern with significant impacts on ecosystems, the economy, and potentially human health. However, accurately detecting and characterizing MPs in biological samples remains a challenge due to the complexity of biological matrices and analytical limitations. This study presents a novel, non-destructive visible near-infrared multispectral imaging (Vis-NIR-MSI) method combined with a supervised self-organizing map (SOM) to enable rapid qualitative and quantitative analysis of MPs in seafood. We specifically aimed to identify and differentiate four types of microplastics, namely PET, PE, PP, and PS, in the range 1–4 mm, present on the surface of minced shrimp and shrimp shell. For quantification, MPs were incorporated into minced shrimp surface at concentrations ranging from 0.04% to 1% w/w. The modified model achieved a high coefficient of determination (R² > 0.99) for PE and PP quantification. Unlike conventional techniques, this approach eliminates the need for pre-sorting or chemical processing, offering a cost-effective and efficient solution for large-scale monitoring of MPs in seafood, with potential applications in food safety and environmental protection. Full article

In the silk production process, cocoons from Bombyx mori worm are degummed and separated from their components. This step generates large residual quantities of an aqueous solution containing various chemical substances, including sericin—a protein that, when discarded improperly, negatively impacts the environment. Sodium bicarbonate and coconut soap are commonly used in the degumming process. The phosphates in the soap and the sodium bicarbonate increase the biological oxygen demand (BOD) and chemical oxygen demand (COD), leading to water contamination. In this study, a Box–Behnken experimental design was used to maximize the extraction of sericin through a conventional extraction under chemical-free conditions. From a total of 45 experiments, the optimal extraction conditions were identified as a solid-to-liquid ratio of 1:20 w/v, a temperature of 120 °C, and 90 min of extraction time. Sericin yields ranged from 9% to 18%. Infrared spectroscopic characterization of the extracted sericin confirmed the presence of protein-specific functional groups and common interactions associated with β-sheet structures. Fractions of high molecular weight (50 kDa to 200 kDa), identified by means of Sodium dodecyl sulfate–polyacrylamide gel electrophoresis (SDS-PAGE) analysis, demonstrate the potential functionality of extracted sericin for the development of biopolymer films useful in biomedical and food industry applications. The optimized methodology is a good alternative to recycle the waste of sericulture chain for obtaining extracts enriched in sericin, as well as to promote the mechanization of artisanal production processes. Full article