Search Results (741)

The stability of nitrogen gas foam hinders its applicability in petroleum applications. Fly ash nanoparticles and clay improve the N₂ foam stability, and flue gas foams provide a cost-effective solution for carbon capture, utilization, and storage (CCUS). This study examines the stability, volume, and bubble structure of foams formed using two anionic surfactants, sodium dodecyl sulfate (SDS) and sodium dodecylbenzene sulfonate (SDBS), along with the cationic surfactant cetyltrimethylammonium bromide (CTAB), selected for their comparable interfacial tension properties. Analysis of foam stability and volume and bubble structure was conducted under different CO₂/N₂ mixtures, with half-life and initial foam volume serving as the evaluation criteria. The impact of fly ash and clay on SDS-N₂ foam was also evaluated. The results showed that foams created with CTAB, SDBS, and SDS exhibit the greatest stability in pure nitrogen, attributed to low solubility in water and limited gas diffusion. SDS showed the highest foam strength attributable to its comparatively low surface tension. The addition of fly ash and clay significantly improved foam stability by migrating to the gas–liquid interface, creating a protective barrier that reduced drainage. Both nano fly ash and clay improved the half-life of nitrogen foam by 11.25 times and increased the foam volume, with optimal concentrations identified as 5.0 wt% for fly ash and 3.0 wt% for clay. This research emphasizes the importance of fly ash nanoparticles in stabilizing foams, therefore optimizing a foam system for enhanced oil recovery (EOR). Full article

Streptococcus pyogenes (Group A Streptococcus, StrepA) is a human pathogen responsible for hundreds of millions of infections each year and remains one of the most prevalent bacterial causes of upper respiratory and skin infections worldwide. Despite its global impact, there is no approved vaccine, and the optimal protective immune response is still not fully understood. In particular, the role of Th17 T cells in immunity against StrepA remains to be explored. We have previously shown that Th17 T cells are induced in humans following StrepA infection. In this study, we investigated the role of Th17 T cells during skin and upper airway StrepA infections. To generate StrepA-specific Th17 T cells, we utilized a novel cationic liposomal adjuvant system. We demonstrated that vaccine-induced Th17 T cells are recruited to the skin and upper airways upon StrepA infection. In the airways, Th17 T cells and IgA correlate with protection, whereas Th1 T cells and IgG do not. To further characterize the recruited Th17 T cells, we used an IL-17 fate-reporter mouse model to track Th17 T cells. Our results show that Th17 T cells outnumber bona fide Th1 T cells in both StrepA-infected skin and upper airways. Surprisingly, most Th17 T cells lose expression of IL-17, and do not express TNFα, IFNγ, and IL-2. Initial single-cell sequencing data suggest the existence of multiple Th17 T cell subsets with distinct expression profiles. We discuss the functional relevance of these subsets in the context of a StrepA infection. Full article

Dye residues from the textile industry constitute a critical wastewater problem. This study aimed to evaluate the removal capacity of methylene blue (MB) in aqueous media, using an adsorbent formulated from activated and sonicated nanoclay (NC) and microatomized Nostoc sphaericum (ANS). NC was obtained by acid treatment, followed by activation with 1 M NaCl and sonication, while ANS was obtained by microatomization in an aqueous medium. NC/ANS was mixed in a 4:1 weight ratio. The NC/ANS synergistic adsorbent was characterized by the point of zero charge (PZC), zeta potential (ζ), particle size, FTIR spectroscopy, and scanning electron microscopy (SEM). NC/ANS exhibited good colloidal stability, as determined by pH_PZC, particle size in the nanometer range, and heterogeneous morphology with functional groups (hydroxyl, carboxyl, and amide), removing between 72.59 and 97.98% from an initial concentration of 10 ppm of MB, for doses of 20 to 30 mg/L of NC/ANS and pH of 5 to 8. Optimal adsorption conditions are achieved at pH 6.8 and 32.9 mg/L of adsorbent NC/ANS. It was observed that the pseudo-first-order (PFO) and pseudo-second-order (PSO) kinetic models best described the adsorption kinetics, indicating a predominance of the physisorption process, with adsorption capacity around 20 mg/g. Isotherm models and thermodynamic parameters of adsorption, ΔS, ΔH, and ΔG, revealed that the adsorption process is spontaneous, favorable, thermodynamically stable, and occurs at the monolayer level, with a regeneration capacity of 90.35 to 37.54% at the fifth cycle. The application of physical activation methods, such as sonication of the clay and microatomization of the algae, allows proposing a novel and alternative synergistic material from organic and inorganic sources that is environmentally friendly and promotes sustainability, with a high capacity to remove cationic dyes in wastewater. Full article

This work investigated the ion exchange technique for selective separation of rare earth elements (REE) from acid mine drainage (AMD), using different column systems, pH values, and eluent concentrations. Systematic analysis of pH and eluent concentration showed that an initial pH of 6.0 and 0.02 mol L⁻¹ NH₄EDTA are the optimal conditions, achieving 98.4% heavy REE purity in the initial stage (0 to 10 bed volumes). This represents a 32-fold increase compared to the original AMD (6.7% heavy REE). The speciation of REE and impurities was determined by Visual Minteq 4.0 software using pH 2.0, which corresponds to the pH at the inlet of the fractionation column. Under this condition, La and Nd and the impurities (Ca, Mg, and Mn) remained in the fractionation column, while Al was partially retained. In addition, the heavy REE (Y and Dy) were mainly in the form of REE-EDTA complexes and not as free cations, which made fractionation more feasible. The fractionation column minimized impurities, retaining 100% of Ca and 67% of Al, generating a liquor concentrated in heavy REE. This sustainable approach adopted herein meets the critical needs for scalable recovery of REE from diluted effluents, representing a circular economy strategy for critical metals. Full article

A metal-ion-free method was developed to prepare κ-carrageenan/cellulose hydrogel beads for efficient cationic dye removal. The beads were fabricated using a mixture of 1-ethyl-3-methylimidazolium acetate and N,N-dimethylformamide as the solvent system, followed by aqueous ethanol-induced phase separation. This process eliminated the need for metal-ion crosslinkers, which typically neutralize anionic sulfate groups in κ-carrageenan, thereby preserving a high density of accessible binding sites. The resulting beads formed robust interpenetrating polymer networks. The initial swelling ratio reached up to 28.3 g/g, and even after drying, the adsorption capacity remained over 50% of the original. The maximum adsorption capacity for crystal violet was 241 mg/g, increasing proportionally with κ-carrageenan content due to the higher surface concentration of anionic sulfate groups. Kinetic and isotherm analyses revealed pseudo-second-order and Langmuir-type monolayer adsorption, respectively, while thermodynamic parameters indicated that the process was spontaneous and exothermic. The beads retained structural integrity and adsorption performance across pH 3–9 and maintained over 90% of their capacity after five reuse cycles. These findings demonstrate that κ-carrageenan/cellulose hydrogel beads prepared via a metal-ion-free strategy offer a sustainable and effective platform for cationic dye removal from wastewater, with potential for heavy metal ion adsorption. Full article

A hetero-disubstituted sugarcane bagasse (HDSB) was prepared by simultaneous one-pot chemical modification of sugarcane bagasse with succinic and phthalic anhydrides. HDSB was used in batch mode for the removal of the cationic dyes auramine-O (AO) and safranin-T (ST) from spiked aqueous solutions. Adsorption of the dyes in mono- and bicomponent systems was investigated as a function of HDSB dosage, pH, contact time, and initial dye concentration. Maximum adsorption capacities for AO and ST on HDSB, at pH 7.0, were 1.37 mmol g⁻¹ (367.7 mg g⁻¹) and 0.93 mmol g⁻¹ (293.3 mg g⁻¹), respectively. In the bicomponent system, ST was preferentially adsorbed on HDSB, revealing an antagonistic effect of ST on AO adsorption. Changes in the enthalpy of the adsorption as a function of HDSB surface coverage were determined by isothermal titration calorimetry, with Δ_adsH° values for AO and ST equal to −22.1 ± 0.3 kJ mol⁻¹ and −23.44 ± 0.01 kJ mol⁻¹, respectively. Under standard conditions, the adsorption of the dyes on HDSB was exergonic and enthalpically driven. Desorption removed ~50% of the adsorbed dyes, and subsequent re-adsorption showed that HDSB could be reused, with non-desorbed dye molecules acting as new binding sites. The interaction between AO and ST with HDSB was elucidated by molecular dynamics simulations with atomistic modeling. Full article

As a carbon-rich material with sufficient inorganic nutrients, biochar is potentially an inexpensive and suitable additive to improve the quality of soil and achieve sustainable agriculture. However, the addition of biochar generally increases pesticide adsorption in soil because of the well-maintained porous structure, and the specific effects of the properties of biochar, soil, and pesticides on the adsorption capacity of pesticides remain unknown. In this study, a meta-analysis was conducted to investigate the effects of biochar addition on pesticide adsorption in soils, focusing on characteristics such as the biochar addition dosage, biochar properties (pH, specific surface area (SSA), pore diameter, (O+N)/C, H/C), and soil properties (texture, initial pH, cation exchange capacity). Overall, wood-derived biochar that was treated at ≥700 °C for 2–4 h, with a pH of 9–10 and a 2–4% addition rate led to the greatest enhancement in the pesticide adsorption capacity of soil. Additionally, the pyrolysis temperature of the biochar, the biochar’s pore diameter, and the soil’s pH significantly influenced the adsorption capacity. Based on this meta-analysis, we conclude that the (O+N)/C ratio of biochar is the most influential predictor of soil’s pesticide adsorption capacity. Full article

Ceria is an important redox catalyst due to the facile Ce³⁺/Ce⁴⁺ switching at its surface. Therefore, in situ determination of the oxidation state of surface cerium cations is of significant interest. Infrared spectroscopy of probe molecules such as CO holds great potential for this purpose. However, the ability of CO to reduce Ce⁴⁺ cations is an important drawback as it alters the initial cerium speciation. Dinitrogen (N₂), due to its chemical inertness, presents an attractive alternative. We recently demonstrated that low-temperature ¹⁵N₂ adsorption on stoichiometric ceria leads to the formation of complexes with Ce⁴⁺ cations on the (110) and (100) planes (bands at 2257 and 2252 cm⁻¹, respectively), while the (111) plane is inert. Here, we report results on the low-temperature ¹⁵N₂ adsorption on reduced ceria nanoshapes (cubes, polyhedra, and rods). A main band at 2255 cm⁻¹, with a weak shoulder at 2254 cm⁻¹, was observed. We attributed these bands to ¹⁵N₂ adsorbed on Ce³⁺ sites located on edges and corners as well as on {100} facets. In conclusion, ¹⁵N₂ adsorbs on the most acidic surface Ce³⁺ sites and enables their distinction from Ce⁴⁺ cations. Full article

The water level of Lake Neuchâtel (Switzerland) was lowered 150 years ago, initiating soil formation and colonization by riparian forests of the previously submerged areas. Although the soils of the whole area are young and have probably quite similar parent material (lacustrine sediments and moraine), the present soils show a large diversity of horizon structures and contents. The aim of this study is to describe the respective processes of accumulation, integration, and stabilization of organic matter and assess the soil variables influenced by these processes in the various types of riparian forests with different moisture levels. The investigation employed a semi-quantitative, holistic approach that combined field observations, laboratory analyses, and micromorphological examination of soil thin sections. The results indicate that the accumulation and stabilization of organic matter are primarily governed by physicochemical factors associated with the parent material, particularly soil texture and calcium cation saturation. Soil moisture and groundwater elevation were found to mainly influence biological activity and vegetation types. Additionally, the incorporation of organic matter is affected by both soil texture and bioturbation processes. Overall, this study underscores the complexity of the mechanisms regulating organic matter dynamics in young soils. Full article

The treatment with an alkali (sodium hydroxide) solution of acid-activated montmorillonite clay minerals resulted in a reduction in specific surface area. However, a significant enhancement in the removal of basic blue-41 dye solution was achieved compared to acid-activated samples only (first step of activation) and to the raw montmorillonite clay. The obtained products were characterized using different techniques. The results indicated that the acid-activated montmorillonites exhibited different physicochemical properties than the starting raw montmorillonite, with a reduction in the cation exchange capacity and improvements in the specific surface area (from 5 m²/g to 274 m²/g) and total pore volume (from 0.031 cm³/g to 0.450 cm³/g) due to the formation of the amorphous silica phase. However, the treatment with NaOH solution was accompanied by significant reductions in the specific surface area (from 274 m²/g to 18 m²/g) and total pore volume (from 0.450 cm³/g to 0.02 cm³/g) due to the dissolution of the formed amorphous silica phase, as confirmed through ²⁹Si MAS NMR and FTIR techniques. In addition, the SiO₂/Al₂O₃ molar ratios were close to those of the starting montmorillonite clay. The removal of the cationic basic blue-41 was optimized under different conditions, such as different initial concentrations, adsorbent doses, and pHs of the dye solution. The maximum removal capacities of acid-activated clays were in the range of 45 mg/g to 80 mg/g and decreased with the extent of the acid activation process. However, the capacities were enhanced after NaOH treatment and reached values in the range of 80 to 120 mg/g. Enhancing the surface area had less of an impact on the materials’ removal ability. The obtained materials performed well in seven adsorption–regeneration cycles, showing a 70% reduction in removal effectiveness. Full article

UVB skin pathology is initiated by reactive oxygen species (ROS), differentiating this condition from other inflammatory diseases involving first the immune cell activation by danger or pathogen molecular patterns followed by oxidative stress. Resolvin D2 (RvD2) has been found to reduce inflammation in preclinical models. However, whether or not RvD2 reduces skin pathology caused by UVB irradiation is not yet known. Therefore, the efficacy of RvD2 on skin pathology triggered by UVB irradiation in female hairless mice was assessed. RvD2 (0.3, 1 or 3 ng/mouse, i.p.) was found to protect the skin against UVB inflammation, as observed in the reduction in edema (46%), myeloperoxidase activity (77%), metalloproteinase-9 activity (39%), recruitment of neutrophils/macrophages (lysozyme⁺ cells, 76%) and mast cells (106%), epidermal thickening (93%), sunburn cell formation (68%), collagen fiber breakdown (55%), and production of cytokines such as TNF-α (100%). Considering the relevance of oxidative stress to UVB irradiation skin pathologies, an important observation was that the skin antioxidant capacity was recovered by RvD2 according to the results that show the ferric reducing antioxidant power (68%), cationic radical scavenges (93%), catalase activity (74%), and the levels of reduced glutathione (48%). Oxidative damage was also attenuated, as observed in the reduction in superoxide anion production (69%) and lipid hydroperoxides (71%). The RvD2 mechanism involved the inhibition of NF-κB activation, as observed in the diminished degradation of IκBα (48%) coupled with a reduction in its downstream targets that are involved in inflammation and oxidative stress, such as COX-2 (66%) and gp91^phox (77%) mRNA expression. In conclusion, RvD2 mitigates the inflammatory and oxidative pathologic skin aggression that is triggered by UVB. Full article

The implantation of bone substitutes is frequently accompanied by inflammation. To reduce the inflammatory response and enhance cell adhesion, proliferation, and differentiation, scaffolds are often loaded with anti-inflammatory drugs. In this study, cellulose and cellulose/hydroxyapatite (1:1 by weight) scaffolds were developed. Structural analysis using SEM and micro-computed tomography revealed that the morphology of the scaffolds met the requirements for bone tissue engineering. The scaffolds were initially loaded with dexamethasone sodium phosphate; however, the drug was released very rapidly. To prolong its release, cationic groups were introduced into the cellulose macromolecules by amination with 2-chloro-N,N-diethylethylamine hydrochloride in an alkaline medium. Dexamethasone sodium phosphate was then immobilised on aminated cellulose and aminated cellulose/HAp scaffolds at concentrations of 157 mg/g and 87 mg/g, respectively. Due to ionic interactions between the cationic groups in the scaffolds and the anionic groups of the drug molecules, drug release was effectively prolonged. After 24 h, only about 6–7% of the drug had been released, with complete release occurring after 170 h. The cationic groups in the scaffold framework facilitated the adsorption and sustained release of dexamethasone sodium phosphate. Full article

In this study, Ni²⁺ and Cd²⁺ resistant Pseudomonas aeruginosa 18, Enterobacter ludwigii 11Uz, and Enterobacter cloacae Uz_5 strains were isolated from soils contaminated with heavy metals in the Samarkand and Kashkadarya regions (Uzbekistan), and tested to remove Ni²⁺ and Cd²⁺ ions from the environment via biosorption. The biosorption capacity of these strains was observed under in vitro conditions. The biosorption process was highly dependent on the growing conditions, with the highest biosorption rate observed after 300 min of incubation at pH 7.0, and 40 °C. The presence of functional groups such as S=O, NH₂, and COOH in the biosorbing microorganisms was confirmed by IR spectroscopy. The adsorption capacity decreased when the initial metal concentration was increased and was enhanced with higher microbial biomass. Enterobacter ludwigii 11Uz strain was found to alter the toxic oxidation state of Ni²⁺ and Cd²⁺ cations, while Pseudomonas aeruginosa 18 and Enterobacter cloacae Uz_5 strains reduced the toxicity of Ni²⁺ cations only by changing their oxidation state. It was confirmed in our studies that the three selected bacterial strains actively participated in the detoxification of Cd²⁺ through the synthesis of cysteine amino acid. Full article

The concomitant utilization of flavonoids and α-tocopherol has the potential to establish a comprehensive antioxidant system that operates in both hydrophilic and lipophilic environments. The objective of this study was to examine the antioxidant interactions between dihydroquercetin, a flavonoid that has shown promise in various studies, as well as structurally related flavonoids, and α-tocopherol in various ratios. The antioxidant capacity was assessed using two ABTS^•+ radical-cation inhibition assays: a decolorization assay and a lag-time assay. The results of this study indicated that formulations of dihydroquercetin, quercetin, rutin, or morin with α-tocopherol exhibited additive or mildly subadditive interactions, independent of their ratios. A two-phase pattern was exhibited by the lag-time data, which, in comparison with individual components, allowed us to suggest that α-tocopherol appeared to dominate the initial phase of radical scavenging, while flavonoids became active in the later phase. This finding indicates that α-tocopherol may play a role in protecting flavonoids from premature oxidation in alcoholic media. The findings could prove valuable for the rational design of antioxidant formulations in the nutraceutical, cosmeceutical, and pharmaceutical industries. Additionally, the two-stage antioxidant behavior offers prospects for the formulation of straightforward, cost-effective analytical approaches to measure components in binary antioxidant formulations. Full article

Silver nanoclusters that are confined inside zeolites can give off intensive tunable emission across the visible region under UV excitation. In this research, a series of silver nanoclusters loaded with R-FAU/Ag (R = Li, Na, K) zeolites were synthesized and then applied as phosphors for LEDs. The XRD and SEM measurements showed the R-FAU/Ag (R = Li, Na, K) zeolites have high crystallinity and a size distribution of 0.7–1.25 μm. Under excitations of 310–330 nm ultraviolet radiation, Li-FAU/Ag, Na-FAU/Ag, and K-FAU/Ag exhibit monotonically declining emission intensities and red-shifted emissions with peak wavelengths of 520, 527, and 535 nm, respectively. By using silicone-based epoxy resin as the packaging material, a series of LEDs were fabricated by mixing R-FAU/Ag (R = Li, Na, K) phosphors. It is indicated that the Li-FAU/Ag-LED shows the strongest intensity of 94.9 mcd, much higher than that of the LEDs made from Na-FAU/Ag (63.7 mcd) and K-FAU/Ag (74.2 mcd) phosphors. Additionally, the chromaticity coordinate of the Li-FAU/Ag-LED is located at (0.2651, 0.4073) and has a high color temperature of 7873 K. Thermal test data showed that upon heating to 440 K, the intensities of R-FAU/Ag (R = Li, Na, K) LEDs decreased to 81%, 79%, and 75% of their initial intensities measured at 280 K, respectively. This research proposes a method for regulating the luminescent properties of silver nanoclusters in FAU zeolite by modifying the extra-framework cations and demonstrates excellent performance in LED products. Full article