Search Results (318)

To enhance agricultural soil health and soil organic carbon (SOC) sequestration, it is important to accurately measure SOC. The aim of this study was to compare common methods for measuring SOC in soils in order to determine the most effective approach among different agricultural land types. The measurement methods of loss-on-ignition (LOI), automated dry combustion (Dumas), and real-time near-infrared spectroscopy (NIRS) were compared. A total of 95 soil core samples, ranging in clay and calcareous content, were collected across a range of agricultural land types from forty-eight fields across five farms in the Southwest of England. There were similar and positive correlations between all three methods for measuring SOC (ranging from r = 0.549 to 0.579; all p < 0.001). On average, permanent grass fields had higher SOC content (6.6%) than arable and temporary ley fields (4.6% and 4.5%, respectively), with the difference of 2% indicating a higher carbon storage potential in permanent grassland fields. Newly predicted conversion equations of linear regression were developed among the three measurement methods according to all the fields and land types. The correlation of the conversation equations among the three methods in permanent grass fields was strong and significant compared to those in both arable and temporary ley fields. The analysed results could help understand soil carbon management and maximise sequestration. Moreover, the approach of using real-time NIRS analysis with a rechargeable portable NIRS soil device can offer a convenient and cost-saving alternative for monitoring preliminary SOC changes timely on or offsite without personnel risks from the high-temperature furnace and chemical reagent adopted in the LOI and Dumas processes, respectively, at the laboratory. Therefore, the study suggests that faster, lower-cost, and safer methods like NIRS for analysing initial SOC measurements are now available to provide similar SOC results as traditional soil analysis methods of the LOI and Dumas. Further studies on assessing SOC levels in different farm locations, land, and soil types across seasons using NIRS will improve benchmarked SOC data for farm stakeholders in making evidence-informed agricultural practices. Full article

The quality of Crocus sativus L. flowers, beyond their stigmas, is influenced by the presence of bioactive metabolites also in their floral bio-residues. Given the effect of climatic and soil variables on these bioactive compounds, the aim of this research was to develop an agroecological zoning of saffron crop areas within the Protected Designation of Origin (PDO) La Mancha region (Castilla-La Mancha, Spain) by integrating the floral metabolite content with climatic and soil variables. To achieve this, a total of 173 samples were collected during the 2022 and 2023 harvests and analyzed via RP-HPLC-DAD to determine crocins, picrocrocin, kaempferols, and anthocyanins. Two new indices, Cropi (crocins + picrocrocin) and Kaeman (kaempferols + anthocyanins), were defined to classify flowers into four quality categories (A–D). High-quality classifications (A and B) were consistently associated with plots grouped in the meteorological stations of Ontur, El Sanchón, and Bolaños, indicating favorable edaphoclimatic conditions and climatic parameters, such as moderate temperatures and reduced humidity, for metabolite biosynthesis. In contrast, plots included in the meteorological stations of Tarazona and Pedernoso were mostly assigned to lower categories (C and D). Spatial analysis using thematic maps revealed that areas with an intermediate carbonate content, less calcareous soils, and higher organic matter levels were linked to higher flower quality. These findings highlight the influence of soil characteristics and climate, with distinct seasonal contrasts, that positively influence metabolite synthesis and flower quality. Full article

Recycling washed mineral waste, generated as a byproduct of the mechanical wastewater treatment process, can be a beneficial alternative to widely used natural sand in construction. Studies on material from the Warsaw agglomeration, available in quantities sufficient for construction applications, demonstrated its high usability in specific hydrotechnical applications. Key laboratory tests for material characterization included physical, permeability, mechanical, and chemical property analyses. The tested waste corresponds to uniformly graded medium sands (uniformity coefficient: 2.20) and weakly calcareous (calcium carbonate content: 2.25–3.29%) mineral soils with organic content ranging from 0.24% to 1.49%. The minimum heavy metal immobilization level reached 91.45%. At maximum dry density of the soil skeleton (1.78/1.79 g/cm³) and optimal moisture content (11.34/11.95%), the hydraulic conductivity reached 4.38/7.71 m/d. The mechanical parameters of washed mineral waste included internal friction angle (34.4/37.8°) and apparent cohesion (9.37/14.98 kPa). The values of the determined parameters are comparable to those of natural sands used as construction aggregates. As a result, washed mineral waste has a high potential for use as an alternative material to natural sand in the analyzed hydrotechnical applications, particularly for flood embankment construction, by applicable technical standards and construction guidelines. Full article

In the context of efforts to reduce greenhouse gas emissions in the building sector, the reintegration of traditional earthen construction into modern architectural and renovation practices offers a sustainable alternative. To address the mechanical and water-resistance limitations of adobe bricks, the use of agricultural waste—such as rice husk—is increasingly being explored. This experimental study evaluates the effects of rice husk addition on the mechanical, hygrothermal, and acoustic properties of adobe bricks. Two soil types—one siliceous and one calcareous—were combined with 1, 2, and 3 wt% rice husk to produce bio-based earthen bricks. The influence of rice husk was found to depend strongly on the soils’ mineralogical and granulometric characteristics. The most significant improvements were in hygrothermal performance: at 3 wt%, thermal conductivity was reduced by up to 35% for calcareous soil and 20% for siliceous soil, indicating enhanced insulation. Specific heat capacity also increased with husk content, suggesting better thermal inertia. The moisture buffering capacity, already high in raw soils, is further improved due to increased surface porosity. Mechanically, rice husk incorporation had mixed effects: a modest increase in compressive strength was observed in siliceous soil at 1 wt%, while calcareous soil showed slight improvement at 3 wt%. Acoustic performance remained low across all samples, with minimal gains attributed to limited macro-porosity. These findings highlight the importance of soil composition in optimizing rice husk dosage and suggest promising potential for rice husk-stabilized adobe bricks, especially in thermally demanding environments. Full article

Calcareous soils, characterized by high pH and calcium carbonate content, often limit the availability of essential nutrients for crops such as rice (Oryza sativa L.), reducing yield and nutritional quality. In this study, we evaluated the effect of the halotolerant yeast Debaryomyces hansenii on the growth, nutrient uptake, and phosphorus acquisition mechanisms of rice plants cultivated in calcareous soil under controlled greenhouse conditions. Plants inoculated with D. hansenii, particularly via root immersion, exhibited significantly higher SPAD chlorophyll index, plant height, and grain yield compared to controls. A modest increase (~4%) in dry matter content was also observed under sterilized soil conditions. Foliar concentrations of Fe, Zn, and Mn significantly increased in plants inoculated with D. hansenii via root immersion in non-sterilized calcareous soil, indicating improved micronutrient acquisition under these specific conditions. Although leaf phosphorus levels were not significantly increased, D. hansenii stimulated acid phosphatase activity, as visually observed through BCIP staining, and upregulated genes involved in phosphorus acquisition under both P-sufficient and P-deficient conditions. At the molecular level, D. hansenii upregulated the expression of acid phosphatase genes (OsPAP3, OsPAP9) and a phosphate transporter gene (OsPTH1;6), confirming its influence on P-related physiological responses. These findings demonstrate that D. hansenii functions as a plant growth-promoting yeast (PGPY) and may serve as a promising biofertilizer for improving rice productivity and nutrient efficiency in calcareous soils, contributing to sustainable agricultural practices in calcareous soils and other nutrient-limiting environments. Full article

Soil aggregates play critical roles in regulating the behavior of heavy metal in soils. To understand the distribution of cadmium (Cd) in aggregates of different soil types, as well as their roles in regulating the Cd bioavailability of bulk soils, four major arable soils, including acidic, neutral, and calcareous purple soils and calcareous yellow soil (APS, NPS, CPS, and CYS), were sampled from Chongqing, China, for aggregate separation and determination of the total Cd(T-Cd) distribution, fractionation, and extractability in various-sized aggregates. A pot experiment with ryegrass (Lolium perenne L.) was conducted to evaluate the Cd bioavailability in bulk soils as influenced by aggregates. The results show that the composition of soil aggregates varies a lot among soils: lower soil pH tends to increase the proportion of macroaggregates while decreasing that of smaller aggregates. The Cd distribution, HCl-extractability, and active fraction (AF, T-Cd/HCl-Cd) in aggregates are all soil type-dependent, with pH and particle size being the main determining factors; the distribution pattern of Cd concentrated in smaller aggregates is only found for CPS and CYS (pH > 7.5) upon exogenous Cd addition, though the finest aggregates (silt–clay, <0.053 mm) consistently exhibited the highest Cd enrichment for all tested soils. The Cd extractability and AF values in all aggregates show a sequence of APS > NPS > CPS > CYS, indicating the fundamental influence of soil pH on Cd availability. Higher AF values over bulk soils, either in silt–clay aggregates or in microaggregates (0.053–0.25 mm), whereas lower AF in macroaggregates (1–2 mm) are found for APS and NPS, which correspond to the relative portions of Ex-Cd and Fe/Mn oxide-bound Cd (Fe/Mn-Cd) in these aggregates. In contrast, less variation of AF values among aggregates is observed for CPS and CYS and for APS/NPS upon Cd addition. Pot experiments demonstrated strong positive correlations between ryegrass Cd uptake and HCl-Cd in silt–clay aggregates and T-Cd in microaggregates, while a negative correlation was observed with T-Cd in macroaggregates. These findings supply new insight into the mechanisms of aggregates in controlling Cd bioavailability in bulk soils and shed light on the development of new strategies for remediating Cd-polluted soils. Full article

Biodegradable mulch films (BDMs) are considered a promising solution for mitigating plastic residue pollution in agroecosystems. However, the degradation behavior and ecological impacts of their residues on soil–plant systems remain unclear. Here, a pot experiment was conducted using an acidic purple soil (AS), a neutral purple soil (NS), and a calcareous purple soil (CS) to investigate the degradation of 1% (w/w) microplastics derived from polyethylene mulch film (PE-MPs) and polybutylene adipate terephthalate/polylactic acid (PBAT/PLA) mulch film (Bio-MPs), as well as their effects on soil properties, bacterial communities, and radish growth. PE-MPs degraded slightly, while the degradation of Bio-MPs followed the order of NS > CS > AS. PE-MPs and Bio-MPs enhanced the nitrification and radish growth in AS but had no significant effects on soil properties and radish growth in CS. Bio-MPs notably increased the relative abundance of PBAT/PLA degradation-related bacteria, such as Ramlibacter, Bradyrhizobium, and Microbacterium, across the three soils. In NS, Bio-MPs raised soil pH and enriched nitrogen-fixing and denitrifying bacteria, leading to a decrease in NO₃⁻-N content and radish biomass. Overall, the effects of Bio-MPs on soil–plant systems varied with soil properties, which are closely related to their degradation rates. These findings highlight the need to assess the ecological risks of BDM residues before their large-scale use in agriculture. Full article

This research evaluated the recovery and reuse of dolomitic calcareous amendment saturated with nutrients adsorbed from hydroponic effluent as a soil improver and its impact on the agronomic performance of Phaseolus vulgaris. Initially, the dolomitic calcareous amendment (DCA) was saturated with nutrients from the hydroponic effluent through adsorption tests. The characterization of the DCA was conducted before and after nutrient saturation to verify its composition. Soil analysis was carried out prior to the trial, and a completely randomized experimental design was applied with four treatments and five replications, totaling 20 experimental units for each soil type (sandy and clayey): T1 (control), T2 (raw dolomitic calcareous amendment—DCA), T3 (saturated dolomitic calcareous amendment—DCAS), and T4 (granulated dolomitic calcareous amendment—DCAG). Agronomic performance parameters of Phaseolus vulgaris were assessed to determine nutrient availability to the plant: number of pods, pod length (cm), number of seeds per pod, and weight of 100 seeds (g). Data normality was verified using the Shapiro–Wilk test, and results were analyzed using ANOVA and mean comparisons through Tukey’s test (p < 0.05) using InfoStat software 2020I. Additionally, plant tissue was analyzed to determine nutrient absorption in the seeds, and both soil types were analyzed after harvest. Adsorption results indicated that the DCA retained phosphorus, manganese, calcium, and zinc. According to the characterization, DCA primarily consisted of calcium and magnesium carbonates; following the saturation process, an increase in carbonate groups was observed due to calcium adsorption from the hydroponic effluent. Results in both soil types showed no significant differences in pod number, pod length, or seeds per pod, except for the weight of 100 seeds in sandy soil, where T1, T2, and T3 differed significantly from T4. Based on references, the phosphorus content in the harvested seeds from T3 in sandy soil is classified as sufficient. The findings demonstrate the potential of recovering and reusing nutrients from hydroponic effluent using DCA and transforming it into a value-added agricultural input for soil improvement, presenting a promising alternative for more sustainable and efficient agriculture. Full article

High levels of pesticide use are associated with intensive crop production. Pesticides are increasingly prevalent in surface and groundwater, which is a major environmental concern. Various methods have been proposed to improve the retention and/or degradation of pesticides in soils. These methods are mainly based on soil adaptation with organic wastes to mitigate soil and water pollution. In addition, there has recently been increased interest in assessing the influence of organic waste additions on pesticide movement in soils with low contents of organic matter. Agriculture and related industries generate large amounts of waste each year. Because of their components, they have the great ability to produce high-value products for environmental restoration. This study reports on the influence of four different agro-industrial wastes (orange peel, beer bagasse, grape pomace, and gazpacho waste) used as organic amendments on the leaching of metobromuron and chlorbromuron (phenylurea herbicides) on a silty clay loam soil (gypsic–calcaric regosol) with low organic matter contents from a semiarid area (southeastern Spain). The adsorption, leaching, and dissipation processes of these herbicides were evaluated on a laboratory scale in amended and unamended soils. In addition, the main leaching indices (GUS, LIX, LEACH, M LEACH, LIN, GLI, HI, and ELI) commonly used to assess groundwater protection against pesticide pollution were evaluated. The sorption coefficients (K_OC) increased in the amended soils. Metobromuron was found in leachates in all cases, although a marked reduction was observed in amended soils, while chlorbromuron was mainly retained in soils, especially in the top layer. The disappearance time (DT₅₀) for metobromuron and chlorbromuron in soil ranged from 11 to 56 d and 18 to 95 d, respectively. All indices except GLI categorize metobromuron as mobile or very mobile in unamended soil. For chlorbromuron, GUS, LIX, LEACH, MLEACH, and Hornsby classify this compound as a medium-to-high leache, while GLI and ELI classify it as having low mobility. In amended soils, most indices classify metobromuron as transitioning to mobile, while most indices catalog chlorbromuron as immobile/transition. Full article

The crystallization of soluble salts is one of the most significant agents of deterioration affecting porous building materials in historical architecture. This process not only compromises the physical integrity of the materials but also results in considerable aesthetic, structural, and economic consequences. Soluble salts involved in these processes may originate from geogenic sources—including soil leachate, marine aerosols, and the natural weathering of parent rocks—or from anthropogenic factors such as air pollution, wastewater infiltration, and the use of incompatible restoration materials. This study examines the role of capillary rise as a primary mechanism responsible for the vertical migration of saline solutions from the soil profile into historic masonry structures, especially those constructed with calcareous stones. It describes how water retained or sustained within the soil matrix ascends via capillarity, carrying dissolved salts that eventually crystallize within the pore network of the stone. This phenomenon leads to a variety of damage types, ranging from superficial staining and efflorescence to more severe forms such as subflorescence, microfracturing, and progressive mass loss. By adopting a multidisciplinary approach that integrates concepts and methods from soil physics, hydrology, petrophysics, and conservation science, this paper examines the mechanisms that govern saline water movement, salt precipitation patterns, and their cumulative effects on stone durability. It highlights the influence of key variables such as soil texture and structure, matric potential, hydraulic conductivity, climatic conditions, and stone porosity on the severity and progression of deterioration. This paper also addresses regional considerations by focusing on the context of Spain, which holds one of the highest concentrations of World Heritage Sites globally and where many monuments are constructed from vulnerable calcareous materials such as fossiliferous calcarenites and marly limestones. Special attention is given to the types of salts most commonly encountered in Spanish soils—particularly chlorides and sulfates—and their thermodynamic behavior under fluctuating environmental conditions. Ultimately, this study underscores the pressing need for integrated, preventive conservation strategies. These include the implementation of drainage systems, capillary barriers, and the use of compatible materials in restoration, as well as the application of non-destructive diagnostic techniques such as electrical resistivity tomography and hyperspectral imaging. Understanding the interplay between soil moisture dynamics, salt crystallization, and material degradation is essential for safeguarding the cultural and structural value of historic buildings in the face of ongoing environmental challenges and climate variability. Full article

Annexins (ANNs) are a family of calcium (Ca²⁺)-dependent and phospholipid-binding proteins, which are implicated in the regulation of plant growth and development as well as protection from biotic and abiotic stresses. Corydalis saxicola Bunting, an endangered benzylisoquinoline alkaloid (BIA)-rich herbaceous plant, widely used in traditional Chinese medicine, is endemic to the calciphilic karst region of China. However, whether and how ANNs are involved in the biosynthesis pathway of BIAs and/or help C. saxicola plants cope with abiotic properties, such as calcareous soils, are largely unknown. Here, nine CsANN genes were identified from C. saxicola, and they were divided into three subfamilies, namely subfamilies I, II, and IV, based on the phylogenetic tree. The CsANNs clustered into the same clade, sharing similar gene structures and conserved motifs. The nine CsANN genes were located on five chromosomes, and their expansions were mainly attributed to tandem and whole-genome duplications. The CsANN transcripts displayed organ-specific and Ca²⁺-responsive expression patterns across various tissues. In addition, transient overexpression assays showed that CsANN1 could positively regulate the accumulation of BIA compounds in C. saxicola leaves, probably by directly interacting with key BIA-biosynthetic-pathway enzymes or by interacting with BIA-biosynthetic regulatory factors, such as MYBs. This study sheds light on the profiles and functions of the CsANN gene family and paves the way for unraveling the molecular mechanism of BIA accumulation, which is regulated by Ca²⁺ through CsANNs. Full article

This study proposes an advanced thermodynamic energy equation to accurately simulate the stress–dilatancy relationship in granular soils for both uncrushed and crushed sands. Traditional energy formulations primarily consider dissipation energy and often neglect the role of free energy. Recent developments have introduced free energy components to account for plastic energy contributions from dilation and particle crushing. However, significant discrepancies between theoretical predictions and experimental observations remain, largely due to the omission of complex mechanisms such as contact network rearrangement, force-chain buckling, grain rolling, rotation without slip, and particle crushing. To address these gaps, the proposed model incorporates dual exponential decay functions into the free energy framework. Rather than explicitly modeling each mechanism, this formulation aims to phenomenologically capture the interplay between fundamentally opposing thermodynamic forces arising from complex mechanisms during granular microstructure evolution. The model’s applicability is validated using the experimental results from both uncrushed silica sand and crushed calcareous sand. Through extensive comparison with over 100 drained triaxial tests on various sands, the proposed model shows substantial improvement in reproducing stress–dilatancy behavior. The average discrepancy between predicted and measured $\eta –D$ relationships is reduced to below 15%, compared to over 60% using conventional models. This enhanced energy equation provides a robust and practical tool for predicting granular soil behavior, supporting a wide range of geotechnical engineering applications. Full article

Circular economy in the context of municipal organic waste management has boosted the emergence of novel composting scenarios, such as community composting and decentralized urban composting in small installations, which favors localized management and valorization of organic waste streams. However, there is little information about the agronomic use of the composts obtained from these new organic waste management systems as an alternative for inorganic fertilization in crop production. In this work, municipal solid waste-derived composts from two decentralized composting scenarios (CM1 and CM2 from community composting, and CM3 and CM4 from decentralized urban small-scale composting plants) were applied and mixed in the top layer of a calcareous clayey-loam soil to assess their effects as alternative substitutes for conventional soil inorganic fertilization (IN) during two successive cultivation cycles of lettuce (Lactuca sativa L.) grown in pots with the amended soils. These treatments were also compared with an organic waste (goat–rabbit manure, E) and a control treatment without fertilization (B). The effects of the fertilizing treatments on the crop yield and quality, as well as on the properties of the soil considered were studied. In general, the application of the different composts did not produce negative effects on lettuce yield and quality. The compost-derived fertilization showed similar lettuce yields compared to the inorganic and manure-derived fertilizations (IN and E, respectively), and higher yields than the soil without amendment (B), with increases in the initial yield values of B, for the first cycle from 34.2% for CM1 to 53.8% for CM3, and from 20.3% for CM3 to 92.4% for CM1 in the second cycle. Furthermore, the organically amended soils showed a better crop development, obtaining higher values than the control treatment in the parameters studied. In addition, the incorporation of the organic treatments improved the soil characteristics, leading to 1.3 and 1.2 times higher organic matter contents in the soils with CM2 and in the soils with CM1, CM3, and E, respectively, compared to the control soil without fertilizing treatment (B), and 2.0 and 1.8 times greater organic matter contents, respectively, compared to soil with inorganic fertilization (IN). Therefore, the use of municipal solid waste-derived composts from these new organic waste management systems, such as the decentralized composting scenarios studied (community composting and urban decentralized small-scale composting plants), is presented, not only as a sustainable valorization method, but also as an alternative for the use of inorganic fertilizers in lettuce cultivation, while enhancing soil properties, contributing to increasing the circularity of agriculture. Full article

Electrolysis desaturation has emerged as an innovative technique to mitigate liquefaction risk by reducing soil saturation in liquefiable foundations. This study evaluated the effectiveness of horizontal electrolysis on calcareous sandy foundations in marine environments by employing 35‰ NaCl solution as pore fluid under different current intensities (1A, 2A, and 4A). Experimental results demonstrated that hydrogen gas was generated at the cathode, while chlorine gas was produced at the anode, with peak gas retention rates of 100%, 90.83%, and 63.26% for 1A; 97.61%, 79.04%, and 60.94% for 2A; and 95.37%, 48.49%, and 42.81% for 4A over three electrolysis cycles. Three key findings emerged from our investigation: First, the resistivity of calcareous sand displayed a three-stage variation pattern, primarily governed by temperature and gas content evolution. Second, the temperature-corrected resistivity model provided reliable saturation data, revealing that electrode-adjacent soil layers exhibited significantly greater saturation reduction compared to intermediate layers. The average saturation variation during a single electrolysis cycle reached 3.2%, 2.6%, and 4.4% for 1A, 2A, and 4A, respectively, in the soil layers near the electrodes, compared to 2.1%, 1.7%, and 3.3% in the middle soil layers under the same current intensities. Third, upon stopping electrolysis, gas redistribution led to decreased saturation in upper soil layers, with lower current intensities more effective in retaining gases within the soil matrix. Based on these findings, an electrolytic influence coefficient for calcareous sand applicable to Archie’s formulation is proposed. This study enhances the understanding of the mechanism of electrolysis desaturation and provides a theoretical basis for the effectiveness of electrolysis desaturation on calcareous sand foundations. Full article

The influence of petroleum hydrocarbons (PHCs) on the transport and transformation of heavy metals may limit bioremediation efficiency. The mechanisms by which PHC degradation intermediates control heavy metal distribution in calcareous soils from karst areas require further exploration. This study systematically investigated how compositional changes in diesel fuel during aging regulated the fate of Cd and Pb in calcareous soils. The results demonstrated that the low-molecular-weight fractions of diesel fuel (C₁₀−C₁₆) were preferentially degraded. This degradation process altered zeta potential, cation exchange capacity (CEC), and pH, thereby promoting Cd stabilization through electrostatic attraction and speciation transformation. Particularly, reducible Cd content showed a strong positive correlation with C₁₆ content (r = 0.88, p < 0.05). Furthermore, the degradation of C₁₀−C₁₆ fractions caused Pb transformation from residual to bioavailable fractions by stimulating microbial activity. Residual Pb content was positively correlated with C₁₀−C₁₆ fractions (r = 0.55, p < 0.05). Notably, dissolved organic matter (DOM) and CaCO₃ content in calcareous soils enhanced Cd and Pb adsorption, thereby weakening the interactions between these metals and C₁₀−C₁₆ fractions. Consequently, multiple linear regression (MLR) models relying exclusively on C₁₀−C₁₆ degradation parameters showed poor fitting coefficients for Cd/Pb mobility. The present work provides scientific guidance for heavy metal bioremediation in calcareous soils. Full article