Search Results (449)

The typical ranges available for electric vehicles (EVs) may be considered by users to be inadequate when compared to long, real-life trips, and charging operations may need to be planned along journeys. To evaluate the compatibility between vehicle features and charging options for realistic journeys performed by car, a simulation approach is proposed here, using travel data collected from real vehicles to obtain trip chains for multiple consecutive days. Car travel activities, including stops with the option of charging, were simulated by applying an agent-based approach. Charging operations can be integrated into trip chains for user activities, assuming that they remain unchanged in the event that vehicles switch to electric. The energy consumption of the analyzed trips, disaggregated by vehicle type, was estimated using the average travel speed, which is useful for capturing the main route features (ranging from urban to motorways). Data were recorded for approximately 25,000 vehicles in the Turin Metropolitan Area for six consecutive days. Market segmentation of the vehicles was introduced to take into consideration different energy consumption rates and charging times, given that the electric power, battery size, and consumption rate can be related to the vehicle category. Charging activities carried out using public infrastructure during idle time between consecutive trips, as well as those carried out at home or work, were identified in order to model different needs. Full article

This article presents a comparative study of the storage of energy produced by photovoltaic panels by means of two types of batteries: Lead–Acid and Lithium-Ion batteries. The work involved the construction of a model in MATLAB-Simulink for controlling the loading/unloading of storage batteries with energy produced by photovoltaic panels through a buck-type DC-DC convertor, controlled by means of the MPPT algorithm implemented through the method of incremental conductance based on a MATLAB function. The program for the MATLAB function was developed by the author in the C++ programming environment. The MPPT algorithm provides maximum energy transfer from the photovoltaic panels to the battery. The electric power taken over at a certain moment by Lithium-Ion batteries in photovoltaic panels is higher than the electric power taken over by Lead–Acid batteries. Two types of batteries were successively used in this model: Lead–Acid and Lithium-Ion batteries. Based on the results being obtained and presented in this work it may be affirmed that the storage battery Lithium-Ion is more performant than the Lead-Acid storage battery. At the Laboratory of Electrical Machinery and Drives of the Engineering Faculty of Bacau, an experimental stand was built for a storing system for electric energy produced by photovoltaic panels. For controlling DC-DC buck-type convertors, a program was developed in the programming environment Arduino IDE for implementing the MPPT algorithm for incremental conductance. The simulation part of this program is similar to that of the program developed in C++. Through conducting experiments, it was observed that, during battery charging, along with an increase in the charging voltage, an increase in the filling factor of the PWM signal controlling the buck DC-DC convertor also occurred. The findings of this study may be applicable to the storage of battery-generated electrical energy used for supplying electrical motors in electric cars. Full article

Internal combustion engine vehicles damage the environment and public health by emitting toxic fumes, such as CO₂ or CO and other trace compounds. The use of electric cars helps to reduce the emission of pollutants into the environment due to the use of batteries with no direct and local emissions. However, accidents of battery electric vehicles pose new challenges, such as thermal runaway. Such accidents can be serious and, in some cases, may result in uncontrolled overheating that causes the battery pack to spontaneously ignite. In particular, the most dangerous vehicles are heavy goods vehicles (HGVs), as they release a large amount of energy that generate high temperatures, poor visibility, and respiratory damage. This study aims to determine the potential consequences of large BEV fires in road tunnels using computational fluid dynamics (CFD). Furthermore, a comparison between a BEV and an ICEV fire shows the differences related to the thermal and the toxic impact. Furthermore, the adoption of a longitudinal ventilation system in the tunnel helped to mitigate the BEV fire risk, keeping a safer environment for tunnel users and rescue services through adequate smoke control. Full article

The improvement of environmental conditions has become a priority for governments and legislators. New electrified mobility systems are increasingly present in our environment, as they enable the reduction of polluting emissions. Electric vehicles (EVs) are one of the fastest-growing alternatives to date, with exponential growth expected over the next few years. In this article, the various charging modes for EVs are explored, and the risks associated with charging technologies are analysed, particularly for charging systems in high-power DC with Lithium battery energy storage, given their long market deployment and characteristic behaviour. In particular, the Arc Flash (AF) risk present in high-power DC chargers will be studied, involving numerous simulations of the charging process. Subsequently, the Incident Energy (IE) analysis is carried out at different specific points of a commercial high-power ‘Mode 4’ charger. For this purpose, different analysis methods of recognised prestige, such as Doan, Paukert, or Stokes and Oppenlander, are applied, using the latest version of the ETAP^® simulation tool version 22.5.0. This study focuses on quantifying the potential severity (consequences) of an AF event, assuming its occurrence, rather than performing a probabilistic risk assessment according to standard methodologies. The primary objective of this research is to comprehensively quantify the potential consequences for workers involved in the operation, maintenance, repair, and execution of tasks related to EV charging systems. This analysis makes it possible to provide safe working conditions and to choose the appropriate and necessary personal protective equipment (PPE) for each type of operation. It is essential to develop this novel process to quantify the consequences of AF and to protect the end users of EV charging systems. Full article

This paper presents a high-fidelity multi-physics dynamic model for electric vehicles, serving as a fundamental building block for intelligent vehicle-to-grid (V2G) integration systems. The model accurately captures complex vehicle dynamics of the powertrain, battery, and regenerative braking, enabling precise energy consumption evaluation, including in AI-driven V2G scenarios. Validated using real-world data from a Citroën Ami operating on urban routes in Naples, Italy, it achieved exceptional accuracy with a root mean square error (RMSE) of 1.28% for dynamic state of charge prediction. This robust framework provides an essential foundation for AI-driven digital twin technologies in V2G applications, significantly advancing sustainable transportation and smart grid integration through predictive simulation. Its versatility supports diverse fleet applications, from residential energy management and coordinated charging optimization to commercial car sharing operations, leveraging backup power during peak demand or grid outages, so to maximize distributed battery storage utilization. Full article

There has been a great need for replacing combustion-powered vehicles with electric vehicles (EV), and fully electric cars are meant to replace combustion engine cars. This has led to considerable research into improving the performance of EVs, especially via electric motor voltage control. A wide range of optimization algorithms have been used as traditional approaches, but the dynamic parameters of electric motors, impacted by temperature and different driving cycles, continue to be a problem. This study introduces an improved version of the Parrot Optimizer (IPO) aimed at enhancing voltage regulation in EVs. The algorithm can intelligently adjust certain motor parameters for adaptive management to maintain performance based on different situations. To ensure a stable and sustainable power supply for the powertrain of the EV, a photovoltaic (PV) system is used with energy storage batteries. Such an arrangement seeks to deliver permanent electric energy, a solution to traditional grid electricity reliance. This demonstrates the effectiveness of IPO, with the resultant motor performance remaining optimal despite parameter changes. It is also illustrated that energy production, by integrating PV systems, prevents excessive voltage line drops and thus voltage imbalances. The proposed intelligent controller is verified based on multiple simulations, demonstrating and ensuring significant improvements in EV efficiency and reliability. Full article

Electric passenger vehicles are set to dominate the European car market, driven by EU climate policies and the 2035 ban on internal combustion engine production. This study assesses the sustainability of this transition, focusing on global warming potential and Critical Raw Material (CRM) extraction throughout its life cycle. The intensive use of CRMs raises environmental, economic, social, and geopolitical concerns. These materials are scarce and are concentrated in a few politically sensitive regions, leaving the EU highly dependent on external suppliers. The extraction, transport, and refining of CRMs and battery production are high-emission processes that contribute to climate change and pose risks to ecosystems and human health. A Life Cycle Assessment (LCA) was conducted, using OpenLCA software and the Ecoinvent 3.10 database, comparing a Peugeot 308 in its diesel and electric versions. This study adopts a cradle-to-grave approach, analyzing three phases: production, utilization, and end-of-life treatment. Key indicators included Global Warming Potential (GWP100) and Abiotic Resource Depletion Potential (ADP) to assess CO₂ emissions and mineral resource consumption. Technological advancements could mitigate mineral depletion concerns. Li-ion battery recycling is still underdeveloped, but has high recovery potential, with the sector expected to expand significantly. Moreover, repurposing used Li-ion batteries for stationary energy storage in renewable energy systems can extend their lifespan by over a decade, decreasing the demand for new batteries. Such innovations underscore the potential for a more sustainable electric vehicle industry. Full article

This paper presents the results of the mathematical modeling and experimental studies of charging a traction lithium-ion battery of a passenger electric car using an integrated charger based on a traction voltage inverter. An original three-stage charging algorithm (3PT/PN) has been developed and implemented, which provides a sequential decrease in the charging current when the specified voltage and temperature levels of the battery module are reached. As part of this study, a comprehensive mathematical model has been created that takes into account the features of the power circuit, control algorithms, thermal effects and characteristics of the storage battery. The model has been successfully verified based on the experimental data obtained when charging the battery module in real conditions. The maximum error of voltage modeling has been 0.71%; that of current has not exceeded 1%. The experiments show the achievement of a realized capacity of 8.9 Ah and an integral efficiency of 85.5%, while the temperature regime remains within safe limits. The proposed approach provides a high charge rate, stability of the thermal state of the battery and a long service life. The results can be used to optimize the charging infrastructure of electric vehicles and to develop intelligent battery module management systems. Full article

The transition to passenger car electrification is a crucial step in China’s strategic efforts to achieve carbon peak and carbon neutrality. However, previous research has not considered the variances in vehicle models. Hence, this study aims to fill this gap by comparing the carbon emission reduction and economic feasibility of battery electric vehicles (BEVs) in the Chinese market, taking into account different powertrains, vehicle segments, classes, and driving ranges. Next, the study identifies the most cost-effective BEV within each market segment, employing life-cycle assessment and life cycle cost analysis methods. Moreover, at different levels of technological development, we construct three low-carbon measures, including electricity decarbonization (ED), energy efficiency improvement (EEI), and vehicle lightweight (LW), to quantify the emission mitigation potentials from different carbon reduction pathways. The findings indicate that BEVs achieve an average carbon reduction of about 31.85% compared to internal combustion engine vehicles (ICEVs), demonstrating a significant advantage in carbon reduction. However, BEVs are not economically competitive. The total life cycle cost of BEVs is 1.04–1.68 times higher than that of ICEVs, with infrastructure costs accounting for 18.8–57.8% of the vehicle’ s life cycle costs. In terms of cost-effectiveness, different models yield different results, with sedans generally outperforming sport utility vehicles (SUVs). Among sedans, both A-class and B-class sedans have already reached a point of cost-effectiveness, with the BEV400 emerging as the optimal choice. In low-carbon emission reduction scenarios, BEVs could achieve carbon reduction potentials of up to 45.3%, 14.9%, and 9.0% in the ED, EEI, and LW scenarios, respectively. Thus, electricity decarbonization exhibits the highest potential for mitigating carbon emissions, followed by energy efficiency improvement and vehicle lightweight. There are obvious differences in the stages of impact among different measures. The ED measure primarily impacts the waste treatment process (WTP) stage, followed by the vehicle cycle, while the EEI measure only affects the WTP stage. The LW measure has a complex impact on emission reductions, as the carbon reductions achieved in the WTP stage are partially offset by the increased carbon emissions in the vehicle cycle. Full article

Nowadays, when battery-powered electric vehicles (EVs) travel along motorways, their drivers decide where to recharge their cars’ batteries with no or scarce information on the occupancy status of the next charging stations. While this may still be acceptable in most countries, due to the limited number of EVs on motorways, long queues may build-up in the coming years with increased electric mobility, unless smart allocation strategies are designed and implemented. For instance, as we shall investigate in this manuscript, a centralised coordination of the charging strategies of individual EVs has the potential to significantly reduce the queuing time at charging stations. In particular, in this paper we explain how the charging problem on motorways can be modelled as an optimisation problem, we propose some strategies based on dynamic optimisation to solve it, and we explain how this may be implemented in practice using a centralised charge manager that exchanges information with the EVs and solves the optimisation problems. Finally, we compare in a realistic scenario the current decentralised recharging strategies with a centralised one, and we show that, under simplifying assumptions, queueing times can be reduced by more than 50%. Such a significant reduction allows one to greatly improve vehicular flows and general journey durations without requiring building new infrastructure. Reducing queuing times has a positive impact on traffic congestion and emissions, and the more geographically balanced energy demand of the proposed methodology mitigates energy consumption peaks. Full article

The long-standing need for a modern public transportation system in Lebanon, a developing country of the Middle East with an almost exclusive dependence on costly and polluting passenger cars, has become more pressing in recent years due to the worsening economic crisis and the onset of hyperinflation. This study investigates the potential reductions in energy use, emissions, and costs from the possible introduction of natural gas, hybrid, and battery-electric buses compared to traditional diesel buses in local real driving conditions. Four operating conditions were considered including severe congestion, peak, off-peak, and bus rapid transit (BRT) operation. Battery-electric buses are found to be the best performers in any traffic operation, conditional on having clean energy supply at the power plant and significant subsidy of bus purchase cost. Natural gas buses do not provide significant greenhouse gas emission savings compared to diesel buses but offer substantial reductions in the emission of all major pollutants harmful to human health. Results also show that accounting for additional energy consumption from the use of climate-control auxiliaries in hot and cold weather can significantly impact the performance of all bus technologies by up to 44.7% for electric buses on average. Performance of all considered bus technologies improves considerably in free-flowing traffic conditions, making BRT operation the most beneficial. A vehicle mix of diesel, natural gas, and hybrid bus technologies is found most feasible for the case of Lebanon and similar developing countries lacking necessary infrastructure for a near-term transition to battery-electric technology. Full article

The development of electric mobility offers new perspectives in the energy sector and improves resource efficiency and sustainability. This paper proposes a new strategy for synchronizing the energy requirements of home, commercial, and vehicle mobility, with a focus on the batteries of electric cars. In particular, this paper describes the coordination between a battery management algorithm that optimally assigns its capacity so that at least a part is reserved for mobility and a vehicle-to-building (V2B) service algorithm that uses a share of EV battery energy to improve user participation in renewable energy exploitation at home and at work. The system offers the user the choice of always maintaining a minimum charge for mobility or providing more flexible use of energy for business needs while maintaining established vehicle autonomy. Suitable management at home and at work allows always charging the vehicle to the required level of charge with renewable power excess, highlighting how the cooperation of home and work charging may provide novel frameworks for a smarter and more sustainable integration of electric mobility, reducing energy consumption and providing more effective energy management. The effectiveness of the proposed solution is demonstrated in a realistic configuration with real data and an experimental setup. Full article

To address energy management challenges for intelligent connected automated range-extended electric vehicles under vehicle-road cooperative environments, a hierarchical energy management strategy (EMS) based on speed prediction is proposed from the perspective of multi-objective optimization (MOO), with comprehensive system performance being significantly enhanced. Focusing on connected car-following scenarios, acceleration sequence prediction is performed based on Kalman filtering and preceding vehicle acceleration. A dual-layer optimization strategy is subsequently developed: in the upper layer, optimal speed curves are planned based on road network topology and preceding vehicle trajectories, while in the lower layer, coordinated multi-power source allocation is achieved through EMS_MPC-P, a Bayesian-optimized model predictive EMS based on Pontryagin’ s minimum principle (PMP). A MOO model is ultimately formulated to enhance comprehensive system performance. Simulation and bench test results demonstrate that with SoC₀ = 0.4, 7.69% and 5.13% improvement in fuel economy is achieved by EMS_MPC-P compared to the charge depleting-charge sustaining (CD-CS) method and the charge depleting-blend (CD-Blend) method. Travel time reductions of 62.2% and 58.7% are observed versus CD-CS and CD-Blend. Battery lifespan degradation is mitigated by 16.18% and 5.89% relative to CD-CS and CD-Blend, demonstrating the method’s marked advantages in improving traffic efficiency, safety, battery life maintenance, and fuel economy. This study not only establishes a technical paradigm with theoretical depth and engineering applicability for EMS, but also quantitatively reveals intrinsic mechanisms underlying long-term prediction accuracy enhancement through data analysis, providing critical guidance for future vehicle–road–cloud collaborative system development. Full article

China’s leading development of a complete battery value chain for electric vehicles (EVs) is restructuring the global automotive sector. In contrast with the normal point of view, which emphasizes the role of industrial policy, this article argues that the competitive advantage of China’s EV battery industry lies in firms’ core competency and political economic geography. Based on first-hand empirical material and data obtained from years of fieldwork carried out at an EV battery cluster in south China, this paper identifies the Chinese EV battery industry’s core competency and details how it is built up from below. The current core competency of Chinese battery firms is their mass manufacturing capability, which allows them to supply vehicle manufacturers (OEMs) with lithium-ion batteries of stable and consistent quality at competitive prices. This competency is acquired by firms through technological learning at the workshop level while making use of the experiences they have accumulated while mass producing batteries for consumer electronics sectors. Furthermore, the rapid learning and accumulation of knowledge of battery manufacturing on a large scale is also facilitated by the local industrial cluster environment where firms are embedded. Supported and promoted by local government policies, Chinese EV battery clusters are composed of firms from different segments of a complete battery value chain. The findings have significant implications for battery and car makers in global competition as well as for national and local governments which aim to promote EV battery development. Full article

The reliable operation of current collectors is the most important factor in the efficiency and service life of electric vehicles. This article presents a study devoted to modeling the impact of operating modes on the reliability and durability of the accumulator battery of an electric bus. The purpose of this study is to determine the optimal modes of operation of the battery, which provide maximum service life while maintaining the operational efficiency of the vehicle. The developed simulation model considers the relationship between the thermal and electrical characteristics of the battery, as well as the process of its aging under the influence of various factors, including temperature, depth of discharge and charging/discharging modes. The work provides an assessment of the impact of various operating scenarios, including the charging modes typical of urban routes, on the loss of battery capacity. Using this model, it was established and experimentally confirmed that the greatest decrease in battery life occurs at a high level of battery charge. The best operating conditions range from 10 to 60%. The charge–discharge current should not exceed the nominal current, since an increase in the current level to 2C leads to a decrease in the resource by 30%, and an increase of up to 4C results in a decrease of 47%. The proposed model allow for the determination of the optimal ranges of the state of charge and temperature modes of battery operation, which ensure maximum service life while maintaining the efficiency of the electric bus on the specified routes. Full article