Search Results (9,923)

Ternary chalcogenide-based sulfide materials with distorted morphologies such as BaZrS₃, CaZrS₃, and SrZrS₃, have recently gained much attention in optoelectronics and photovoltaics due to their high structural and thermal stability and compatibility with low-cost, earth-abundant synthesis routes. However, their relatively large bandgaps often limit their suitability for near-infrared (NIR) photodetectors. Here, we conducted a comprehensive investigation of SrHfSe₃, a ternary chalcogenide with an orthorhombic crystal structure and distinctive needle-like morphology, as a promising candidate for NIR photodetection. SrHfSe₃ exhibits a direct bandgap of 1.02 eV, placing it well within the NIR range. Its robust structure, high temperature stability, phase stability and natural abundance make it a compelling material for next-generation, self-powered NIR photodetectors. An in-depth analysis of the SrHfSe₃-based photodetector was performed using SCAPS-1D simulations, focusing on key performance metrics such as J–V behavior, photoresponsivity, and specific detectivity. Device optimization was achieved by thoroughly altering each layer thickness, doping concentrations, and defect densities. Additionally, the influence of interface defects, absorber bandgap, and operating temperature was assessed to enhance the photoresponse. Under optimal conditions, the device achieved a short-circuit current density (Jsc) of 45.88 mA/cm², an open-circuit voltage (Voc) of 0.7152 V, a peak photoresponsivity of 0.85 AW⁻¹, and a detectivity of 2.26 × 10¹⁴ Jones at 1100 nm. A broad spectral response spanning 700–1200 nm confirms its efficacy in the NIR region. These results position SrHfSe₃ as a strong contender for future NIR photodetectors and provide a foundation for experimental validation in advanced optoelectronic applications. Full article

Although numerous studies have examined the spatial patterns of traditional villages and their driving factors, limited attention has been devoted to the transformation of tourism. This study focused on traditional villages in Shaanxi Province, employing geodetector and grounded theory methods to analyze their spatial distribution characteristics and influencing factors. First, most traditional villages have not developed tourism. Only 11.98% reached the relatively mature tourism stage. Second, the spatial distribution of mature traditional tourism villages is scattered and primarily clustered in Liuba County, Mizhi County, and Jia County. Third, the factors influencing spatial distribution characteristics include resource endowment, transportation accessibility, and regional economic conditions. Among these factors, the level of traditional villages, village heritage values, and the local tourism environment show the strongest explanatory power. These findings can help enhance cultural resilience, promote economic transformation and upgrading, and support the sustainable development of traditional villages. Full article

Micronutrients play a prominent role in plant growth and development, and their bioavailability is a growing global concern. Zinc is one of the most important micronutrients in the plant life cycle, acting as a metallic cofactor for numerous biochemical reactions within plant cells. Zinc deficiency in plants leads to various physiological abnormalities, ultimately affecting nutritional quality and posing challenges to food security. Biofortification methods have been adopted by agronomists to increase Zn concentrations in crops through optimal foliar and soil applications. Changing climatic conditions and conventional agricultural practices alter edaphic factors, reducing zinc bioavailability in soils due to abrupt weather changes. Precision agriculture emphasizes need-based and site-specific technologies to address these nutritional deficiencies. Nanoscience, a multidimensional approach, reduces particle size to the nanometer (nm) scale to enhance their efficiency in precise amounts. Nanoscale forms of Zn⁺² and their broad applications across crops are gaining attention in agriculture under varied application methods. This review focuses on the significance of Zn oxide (ZnO) nanoparticles (ZnONPs) and their extensive application in crop production. We also discuss optimum dosage levels, ZnONPs synthesis, application methods, toxicity, and promising future strategies in this field. Full article

This study examines the moral agency of French secondary school headteachers through the lens of the theory of conventions. Using qualitative data from interviews with fifteen headteachers involved in professional development, this study explores how these leaders justify their practices within a centralized, bureaucratic, and hierarchical education system. It identifies a variety of conventions—civic, domestic, industrial, project, market, inspired, and fame—that headteachers draw on to navigate institutional constraints, manage professional relationships, and foster pedagogical and organizational change. Particular attention is given to how civic and domestic conventions shape leadership discourse and practices, especially regarding trust building, decision making, and reform implementation. We also compare the French context with international examples from the International Successful School Principalship Project (ISSPP), focusing on Nordic countries, where leadership emphasizes democratic participation, professional trust, and shared responsibility. This study underscores the uniqueness of the French leadership model, which resists managerial and market logics while remaining rooted in republican and egalitarian ideals. It concludes by advocating for a more context-aware, ethically grounded, and dialogical approach to school leadership. Full article

Aging in wooden barrels is a proven technique that enhances the sensory complexity of alcoholic beverages by promoting the extraction of volatile and phenolic compounds. While oak has been traditionally used, there is a growing interest in exploring alternative wood species that can impart distinct sensory characteristics and promote innovative maturation processes. This review examines the impact of alternative woods on the aging of beverages, such as wine, cachaça, tequila, and beer, focusing on their influence on aroma, flavor, color, and chemical composition. A bibliometric analysis highlights the increasing scientific attention toward wood diversification and emerging aging technologies, including ultrasound and micro-oxygenation, which accelerate maturation while preserving sensory complexity. The role of toasting techniques in modulating the release of phenolic and volatile compounds is also discussed, emphasizing their contribution to unique sensory profiles. Additionally, regulatory aspects and sustainability considerations are explored, suggesting that alternative woods can expand flavor possibilities while supporting environmentally sustainable practices. This review underscores the potential of non-traditional wood species to drive innovation in the aging of alcoholic beverages and provide new sensory experiences that align with evolving consumer preferences and market trends. Full article

Early-career teachers (ECTs) entered the profession during the COVID-19 pandemic, a period that introduced unique stressors to an already-demanding career phase. This systematic review examines empirical studies published between 2020 and February 2025 to explore how the pandemic influenced ECT wellbeing, with particular attention to stressors and protective factors impacting long-term retention and professional sustainability. Guided by PRISMA protocols, databases including Web of Science, ERIC, Google Scholar, and Scopus were searched, screening 470 records and identifying 30 studies that met inclusion criteria: peer-reviewed, empirical, focused on early-career teachers (within the first five years), and situated in or explicitly addressing the pandemic and its ongoing impacts. The results of Braun and Clarke’s thematic analysis (2006) revealed that pandemic-related challenges such as increased workload, professional isolation, disrupted induction processes, and emotional strain have persisted into the post-pandemic era, contributing to sustained risks of burnout and attrition. Regardless, protective factors identified during the pandemic—including high-quality mentoring, structured induction programmes, collegial support, professional autonomy, and effective individual coping strategies—continue to offer essential support, enhancing resilience and professional wellbeing. These findings underscore the necessity of institutionalising targeted supports to address the enduring effects of pandemic-related stressors on ECT wellbeing. By prioritising sustained mental health initiatives and structural supports, education systems can effectively mitigate long-term impacts and improve retention outcomes for early-career teachers in a post-pandemic educational landscape. Full article

To meet the demands for real-time and accurate fault warning of wind turbine gear transmission systems, this study proposes an innovative intelligent warning method based on the integration of digital twin and multi-source data fusion. A digital twin system architecture is developed, comprising a high-precision geometric model and a dynamic mechanism model, enabling real-time interaction and data fusion between the physical transmission system and its virtual model. At the algorithmic level, a CNN-LSTM-Attention fault prediction model is proposed, which innovatively integrates the spatial feature extraction capabilities of a convolutional neural network (CNN), the temporal modeling advantages of long short-term memory (LSTM), and the key information-focusing characteristics of an attention mechanism. Experimental validation shows that this model outperforms traditional methods in prediction accuracy. Specifically, it achieves average improvements of 0.3945, 0.546 and 0.061 in Root Mean Square Error (RMSE), Mean Absolute Percentage Error (MAPE), and R-squared (R²) metrics, respectively. Building on the above findings, a monitoring and early warning platform for the wind turbine transmission system was developed, integrating digital twin visualization with intelligent prediction functions. This platform enables a fully intelligent process from data acquisition and status evaluation to fault warning, providing an innovative solution for the predictive maintenance of wind turbines. Full article

Among brain regions, the cerebellum (CBL) has traditionally been associated with motor control. However, increasing evidence from connectomics and functional imaging has expanded this view, revealing its involvement in a wide range of cognitive and integrative processes. Despite this emerging relevance, the CBL has received comparatively less attention in aging research, which has focused mainly on other central nervous system (CNS) regions such as the neocortex and hippocampus. This review synthesizes the current evidence on glial cell aging across the CNS, emphasizing how cerebellar circuits follow distinct trajectories in terms of cellular remodeling, transcriptional reprogramming, and structural vulnerability. Recent findings highlight that cerebellar astrocytes and microglia exhibit specific signatures related to aging compared to their cortical counterpart, including moderate reactivity, selective immune response, and spatial reorganization. Cerebellar white matter (WM) undergoes structural alteration, suggesting that oligodendroglial cells may undergo region-specific alterations, particularly within WM tracts, although these aspects remain underexplored. Despite the presence of glial remodeling, the CBL maintains a notable degree of structural and functional integrity during aging. This resilience may be the result of the CBL’s ability to maintain synaptic adaptability and homeostatic balance, supported by its highly organized and compartmentalized architecture. A better understanding of the dynamics of cerebellar glial cells in aging may provide new insight into the mechanisms of brain maintenance and identify potential biomarkers for healthy brain aging. Full article

Background/Objectives: Medulloblastoma is the most common malignant brain tumor in children and comprises four molecular subtypes—WNT, SHH, Group 3, and Group 4—each with distinct genetic, epigenetic, and metabolic features. Increasing evidence highlights the critical role of metabolic reprogramming and epigenetic alterations in driving tumor progression, therapy resistance, and clinical outcomes. This review aims to explore the interplay between metabolic and epigenetic mechanisms in medulloblastoma, with a focus on their functional roles and therapeutic implications. Methods: A comprehensive literature review was conducted using PubMed and relevant databases, focusing on recent studies examining metabolic pathways and epigenetic regulation in medulloblastoma subtypes. Particular attention was given to experimental findings from in vitro and in vivo models, as well as emerging preclinical therapeutic strategies targeting these pathways. Results: Medulloblastoma exhibits metabolic adaptations such as increased glycolysis, lipid biosynthesis, and altered amino acid metabolism. These changes support rapid cell proliferation and interact with the tumor microenvironment. Concurrently, epigenetic mechanisms—including DNA methylation, histone modification, chromatin remodeling, and non-coding RNA regulation—contribute to tumor aggressiveness and treatment resistance. Notably, metabolic intermediates often serve as cofactors for epigenetic enzymes, creating feedback loops that reinforce oncogenic states. Preclinical studies suggest that targeting metabolic vulnerabilities or epigenetic regulators—and particularly their combination—can suppress tumor growth and overcome resistance mechanisms. Conclusions: The metabolic–epigenetic crosstalk in medulloblastoma represents a promising area for therapeutic innovation. Understanding subtype-specific dependencies and integrating biomarkers for patient stratification could facilitate the development of precision medicine approaches that improve outcomes and reduce long-term treatment-related toxicity in pediatric patients. Full article

Diamond, renowned for its exceptional electrical, physical, and chemical properties, including ultra-wide bandgap, superior hardness, high thermal conductivity, and unparalleled stability, serves as an ideal candidate for next-generation high-power and high-temperature electronic devices. Among diamond-based devices, Schottky barrier diodes (SBDs) have garnered significant attention due to their simple architecture and superior rectifying characteristics. This review systematically summarizes recent advances in diamond SBDs, focusing on both metal–semiconductor (MS) and metal–interlayer–semiconductor (MIS) configurations. For MS structures, we critically analyze the roles of single-layer metals (including noble metals, transition metals, and other metals) and multilayer metals in modulating Schottky barrier height (SBH) and enhancing thermal stability. However, the presence of interface-related issues such as high densities of surface states and Fermi level pinning often leads to poor control of the SBH, limiting device performance and reliability. To address these challenges and achieve high-quality metal/diamond interfaces, researchers have proposed various interface engineering strategies. In particular, the introduction of interfacial layers in MIS structures has emerged as a promising approach. For MIS architectures, functional interlayers—including high-k materials (Al₂O₃, HfO₂, SnO₂) and low-work-function materials (LaB₆, CeB₆)—are evaluated for their efficacy in interface passivation, barrier modulation, and electric field control. Terminal engineering strategies, such as field-plate designs and surface termination treatments, are also highlighted for their role in improving breakdown voltage. Furthermore, we emphasize the limitations in current parameter extraction from current–voltage (I–V) properties and call for a unified new method to accurately determine SBH. This comprehensive analysis provides critical insights into interface engineering strategies and evaluation protocols for high-performance diamond SBDs, paving the way for their reliable deployment in extreme conditions. Full article

Growing interest in the future applications of nanotechnology in medicine has led to groundbreaking developments in nanosensors. Nanosensors are excellent platforms that provide reliable solutions for continuous monitoring and real-time detection of clinical targets. Nanosensors have attracted great attention due to their remarkable sensitivity, portability, selectivity, and automated data acquisition. The exceptional nanoscale properties of nanomaterials used in the nanosensors boost their sensing potential even at minimal concentrations of analytes present in a clinical sample. Along with applications in diverse sectors, the beneficial aspects of nanosensors have been exploited in healthcare systems to utilize their applications in diagnosing, treating, and preventing diseases. Hence, in this review, we have presented an overview of the disease-prognostic applications of nanosensors in chronic diseases through a detailed literature analysis. We focused on the advances in various nanosensors in the field of major diseases such as cancer, cardiovascular diseases, diabetes mellitus, and neurodegenerative diseases along with other prevalent diseases. This review demonstrates various categories of nanosensors with different nanoparticle compositions and detection methods suitable for specific diagnostic applications in clinical settings. The chemical properties of different nanoparticles provide unique characteristics to each nanosensors for their specific applications. This will aid the detection of potential biomarkers or pathological conditions that correlate with the early detection of various diseases. The potential challenges and possible recommendations of the applications of nanosensors for disease diagnosis are also discussed. The consolidated information present in the review will help to better understand the disease-prognostic potentials of nanosensors, which can be utilized to explore new avenues in improved therapeutic interventions and treatment modalities. Full article

This paper presents field investigations of a corrugated steel soil–steel arch structure with a span of 25.7 m and a rise of 9.0 m—currently the largest single-span structure of its kind in Europe. The structure, serving as a wildlife crossing along the DK16 expressway in northeastern Poland, was constructed using deep corrugated steel plates (500 mm× 237 mm) made from S315MC steel, without additional reinforcements such as stiffening ribs or geosynthetics. The study focused on monitoring the structural behavior during the critical backfilling phase. Displacements and strains were recorded using 34 electro-resistant strain gauges and a geodetic laser system at successive backfill levels, with particular attention to the loading stage at the crown. The measured results were compared with predictions based on the Swedish Design Method (SDM). The SDM equations did not accurately predict internal forces during backfilling. At the crown level, bending moments and axial forces were overestimated by approximately 69% and 152%, respectively. At the final backfill level, the SDM underestimated bending moments by 55% and overestimated axial forces by 90%. These findings highlight limitations of current design standards and emphasize the need for revised analytical models and long-term monitoring of large-span soil–steel structures. Full article

Cultured meat is emerging as a sustainable alternative to conventional animal agriculture, with scaffolds playing a central role in supporting cellular attachment, growth, and tissue maturation. This review focuses on the development of gel-based hybrid biomaterials that meet the dual requirements of biocompatibility and food safety. We explore recent advances in the use of naturally derived gel-forming polymers such as gelatin, chitosan, cellulose, alginate, and plant-based proteins as the structural backbone for edible scaffolds. Particular attention is given to the integration of food-grade functional additives into hydrogel-based scaffolds. These include nanocellulose, dietary fibers, modified starches, polyphenols, and enzymatic crosslinkers such as transglutaminase, which enhance mechanical stability, rheological properties, and cell-guidance capabilities. Rather than focusing on fabrication methods or individual case studies, this review emphasizes the material-centric design strategies for building scalable, printable, and digestible gel scaffolds suitable for cultured meat production. By systemically evaluating the role of each component in structural reinforcement and biological interaction, this work provides a comprehensive frame work for designing next-generation edible scaffold systems. Nonetheless, the field continues to face challenges, including structural optimization, regulatory validation, and scale-up, which are critical for future implementation. Ultimately, hybrid gel-based scaffolds are positioned as a foundational technology for advancing the functionality, manufacturability, and consumer readiness of cultured meat products, distinguishing this work from previous reviews. Unlike previous reviews that have focused primarily on fabrication techniques or tissue engineering applications, this review provides a uniquely food-centric perspective by systematically evaluating the compositional design of hybrid hydrogel-based scaffolds with edibility, scalability, and consumer acceptance in mind. Through a comparative analysis of food-safe additives and naturally derived biopolymers, this review establishes a framework that bridges biomaterials science and food engineering to advance the practical realization of cultured meat products. Full article

Phubbing, a relatively new phenomenon in the field of digital risks, refers to the act of ignoring someone in favor of focusing on a smartphone during face-to-face interactions. Parental phubbing, a specific form of this behavior, is a prevalent negative parenting practice that can affect parent–child relationships and child development. However, the impact of parental phubbing on the emotional and behavioral development of preschool children remains unclear. This study aims to explore the relationship between parental phubbing and preschoolers’ behavioral problems, as well as test whether parents’ mindful attention awareness (MAA) acts as a mediator between them. Method: A questionnaire was administered to 138 Italian parents (mean age = 38.5, SD = 6.2) of 138 kindergarten preschoolers (mean age = 3.9, SD = 1.03). Questionnaires included the Generic Scale of Phubbing (GSP), the Mindful Attention Awareness Scale (MAAS), and the Strengths and Difficulties Questionnaire (SDQ). Results: Analyses revealed a significant negative correlation between the MAAS and SDQ total scores, a positive correlation between the GSP total score and the SDQ total score, and a negative correlation between the GSP total score and the MAAS total score. The mediation analysis did not show a direct effect of GSP on SDQ, suggesting that parental phubbing did not directly predict children’s behavioral difficulties. Nevertheless, the indirect effect measured by bootstrapping was significant, indicating that parental MAA fully mediated the relationship between parental phubbing and preschoolers’ problematic behaviors. Conclusions: Although further research is needed, parental mindfulness may influence phubbing behaviors in parents providing valuable insights for early interventions aimed at reducing problem behaviors in young children. Full article

This essay provides a fine-grained analysis of selected passages of Giulio Aleni (艾儒略 1582–1649)’s translation of Catholic liturgy into classical Chinese in late imperial China. It focuses on the hitherto underexplored relationships between Aleni’s resort to medieval Aristotelianism and Thomism, as well as his translation-based introduction of Catholic Eucharistic theology into China. The case studies here revolve around Aleni’s Chinese translation of Aristotelian-Thomistic hylomorphism, with a focus on his interpretation of “anima” (i.e., the soul, which corresponds largely to linghun 靈魂 in Chinese), which is a multifaceted Western concept that pertains simultaneously to Aristotelian-Thomistic philosophy and Eucharistic theology. It is argued that in his overarching project of introducing Western learnings (i.e., 西學) to sixteenth- and seventeenth-century China, Aleni’s attention is centered primarily on the body-soul and form-matter relationship. This is, as understood here, motivated to a great extent by his scholarly awareness that properly informing Chinese Catholics of the Aristotelian-Thomistic underpinning of Western metaphysics enacts an indispensable role in introducing Catholic liturgy into China, notably the mystery of the Eucharist and Transubstantiation that would not have been effectively introduced to China without having the Western philosophical underpinnings already made available to Chinese intellectuals. Aleni’s use of medieval European cultural legacy thus requires more in-depth analysis vis-à-vis his translational poetics in China. Accordingly, the intellectual and liturgical knowledge in Aleni’s Chinese œuvres shall be investigated associatively, and the medievalism embodied by Aleni offers a valid entry point and productive critical prism. Full article