Search Results (19)

Herein, we report a one-pot palladium- and ligand-free tandem Sonogashira coupling/regioselective 6-endo-dig oxacyclization reaction of 2,4-diiodo-1-methyl-imidazole-5-carboxylic acid with terminal alkynes mediated by Copper(I). This impressive approach offers a straightforward, practical, and efficient tandem procedure for accessing 2-alkynylated pyrano[4,3-d]imidazol-4-one in moderate to good yields with an exclusive 6-endo-dig oxacyclization. Notably, this cost-effective methodology demonstrates broad substrate compatibility with various commercially available aliphatic and (hetero)aromatic terminal alkynes. Furthermore, DFT studies were performed to elucidate the origin of this regioselective 6-endo-dig oxacyclization reaction. Full article

Acetylene and methylacetylene are impurities commonly found in the raw materials used for the production of polymers such as polypropylene and polyethylene. Experimental evidence indicates that both acetylene and methylacetylene can decrease the productivity of the Ziegler-Natta catalyst and alter the properties of the resulting polymer. However, there is still a lack of understanding regarding the mechanisms through which these substances affect this process. Therefore, elucidating these mechanisms is crucial to develop effective solutions to this problem. In this study, the inhibition mechanisms of the Ziegler-Natta catalyst by acetylene and methylacetylene are presented and compared with the incorporation of the first propylene monomer (chain initiation) to elucidate experimental effects. The Density Functional Theory (DFT) method was used, along with the B3LYP-D3 functional and the 6-311++G(d,p) basis set. The recorded adsorption energies were −11.10, −13.99, and −0.31 kcal mol⁻¹, while the activation energies were 1.53, 2.83, and 28.36 kcal mol⁻¹ for acetylene, methylacetylene, and propylene, respectively. The determined rate constants were 4.68 × 10¹¹, 5.29 × 10¹¹, and 2.3 × 10⁻⁸ M⁻¹ s⁻¹ for acetylene, methylacetylene, and propylene, respectively. Based on these values, it is concluded that inhibition reactions are more feasible than propylene insertion only if an ethylene molecule has not been previously adsorbed, as such an event reinforces propylene adsorption. Full article

A Sonogashira coupling of meta-iodocalix[4]arene with various terminal acetylenes confirmed that the meta position of calixarene is well addressable, and that both thermal and microwave protocols led to good yields of alkynylcalixarenes. Alkynes thus obtained were subjected to the ferric chloride and diphenyl diselenide-promoted electrophilic closure. It turns out that the calix[4]arenes give completely different bridging products than those described for the non-macrocyclic starting compounds. This can be demonstrated not only by the isolation of products with a six-membered ring (6-exo-dig), but mainly by the smooth formation of the 5-endo-dig cyclization, which has never been observed in the aliphatic series. An attempt at electrocyclization led to a high yield of the 1,2-diketone (oxidation of the starting alkyne), again in contrast to the reaction described for the acyclic derivatives. The structures of the unexpected products were unequivocally established by X-ray analysis and clearly demonstrate how the preorganized macrocyclic skeleton favors a completely different regioselectivity of cyclization reactions compared to common aliphatic compounds. Full article

Conjugated diyne derivatives are important scaffolds in modern organic synthetic chemistry. Using the Glaser reaction involves the coupling of terminal alkynes which can efficiently produce conjugated diyne derivatives, while the use of a stoichiometric amount of copper salts, strong inorganic base, and excess oxidants is generally needed. Developing an environmentally friendly and effective method for the construction of symmetrical 1,3-diynes compounds by Glaser coupling is still highly desirable. In this study, we present an economical method for the production of symmetric diynes starting from various terminal acetylenes in a Glaser reaction. A simple and practical bis-N-heterocyclic carbene ligand has been introduced as efficient ligands for the Cu-catalyzed Glaser reaction. High product yields were obtained at 100 °C for a variety of substrates including aliphatic and aromatic terminal alkynes and differently substituted terminal alkynes including the highly sterically hindered substrate 2-methoxy ethynylbenzene or 2-trifluoromethyl ethynylbenzene and a series of functional groups, such as trifluoromethyl group, ester group, carboxyl group, and nitrile group. The established protocol is carried out in air under base-free condition and is operationally simple. These research work suggest that bis-N-heterocyclic carbene could also an appealing ligand for Glaser reaction and provide a reference for the preparation of symmetric 1,3-diynes in industrial filed. Full article

Dehydrogenative borylation of terminal alkynes has recently emerged as an atom-economical one-step alternative to traditional alkyne borylation methodologies. Using lithium aminoborohydrides, formed in situ from the corresponding amine-boranes and n-butyllithium, a variety of aromatic and aliphatic terminal alkyne substrates were successfully borylated in high yield. The potential to form mono-, di-, and tri-B-alkynylated products has been shown, though the mono-product is primarily generated using the presented condition. The reaction has been demonstrated at large (up to 50 mmol) scale, and the products are stable to column chromatography as well as acidic and basic aqueous conditions. Alternately, the dehydroborylation can be achieved by treating alkynyllithiums with amine-boranes. In that respect, aldehydes can act as starting materials by conversion to the 1,1-dibromoolefin and in situ rearrangement to the lithium acetylide. Full article

A small library of 1H-benzo[4,5]imidazo[1,2-c][1,3]oxazin-1-one derivatives was prepared in good to excellent yields, involving a Ag₂CO₃/TFA-catalyzed intramolecular oxacyclization of N-Boc-2-alkynylbenzimidazole substrates. In all experiments, the 6-endo-dig cyclization was exclusively achieved since the possible 5-exo-dig heterocycle was not observed, indicating the high regioselectivity of this process. The scope and limitations of the silver catalyzed 6-endo-dig cyclization of N-Boc-2-alkynylbenzimidazoles as substrates, bearing various substituents, were investigated. While ZnCl₂ has shown limits for alkynes with an aromatic substituent, Ag₂CO₃/TFA demonstrated its effectiveness and compatibility regardless of the nature of the starting alkyne (aliphatic, aromatic or heteroaromatic), providing a practical regioselective access to structurally diverse 1H-benzo[4,5]imidazo[1,2-c][1,3]oxazin-1-ones in good yields. Moreover, the rationalization of oxacyclization selectivity in favor of 6-endo-dig over 5-exo-dig was explained by a complementary computational study. Full article

This work aims to investigate the effect of process temperature and catalyst content by pyrolysis and thermal catalytic cracking of (organic matter + paper) fraction from municipal household solid waste (MHSW) on the yields of reaction products (bio-oil, bio-char, H₂O, and gas), acid value, chemical composition of bio-oils, and characterization of bio-chars in laboratory scale. The collecting sectors of MHSW in the municipality of Belém-Pará-Brazil were chosen based on geographic and socio-economic database. The MHSW collected and transported to the segregation area. The gravimetric analysis of MHSW was carried out and the fractions (Paper, Cardboard, Tetra Pack, Hard Plastic, Soft Plastic, Metal, Glass, Organic Matter, and Inert) were separated. The selected organic matter and paper were submitted to pre-treatment of crushing, drying, and sieving. The experiments carried out at 400, 450, and 475 °C and 1.0 atmosphere, and at 475 °C and 1.0 atmosphere, using 5.0, 10.0, and 15.0% (wt.) Ca(OH)₂, in batch mode. The bio-oil was characterized for acid value. The chemical functions present in bio-oil were identified by FT-IR and the composition was identified by GC-MS. The bio-char was characterized by SEM, FT-IR, and XRD. The variance in mass (wt.%) for organic fractions of municipal household solid waste (OFMHSW), between 56.21 and 67.45% (wt.), lies with the interval of 56% (wt.) and 64% (wt.) of OFMHSW for middle- and low-income countries. The pyrolysis of MHSW fraction (organic matter + paper) shows bio-oil yields between 2.63 and 9.41% (wt.), aqueous phase yields between 28.58 and 35.08% (wt.), solid phase yields between 35.29 and 45.75% (wt.), and gas yields between 16.54 and 26.72% (wt.). The bio-oil yield increases with pyrolysis temperature. For the catalytic cracking, the bio-oil and gas yields increase slightly with CaO content, while that of bio-char decreases, and the H₂O phase remains constant. The GC-MS of liquid reaction products identified the presence of hydrocarbons (alkanes, alkenes, alkynes, cycloalkanes, and aromatics) and oxygenates (carboxylic acids, ketones, esters, alcohols, phenols, and aldehydes), as well as compounds containing nitrogen, including amides and amines. The acidity of bio-oil decreases with increasing process temperature and with aid Ca(OH)₂ as a catalyst. The concentration of hydrocarbons in bio-oil increases with increasing Ca(OH)₂-to-OFMHSW fraction ratio due to the catalytic deoxygenation of fatty acid molecules, by means of decarboxylation/decarbonylation, producing aliphatic and aromatic hydrocarbons. Full article

A new class of phosphorus dendritic compounds (PDCs) having a cyclotriphosphazene (P₃N₃) core and decorated with six β-cyclodextrin (βCD) units, named P₃N₃-[O-C₆H₄-O-(CH₂)_n-βCD]₆, where n = 3 or 4 was designed, and the synthesis was performed using copper (I) catalyzed alkyne-azide cycloaddition (CuAAC). To obtain the complete substitution of the P₃N₃, two linkers consisting of an aromatic ring and an aliphatic chain of two different lengths were assessed. We found that, with both linkers, the total modification of the periphery was achieved. The two new obtained dendritic compounds presented a considerably high water solubility (>1 g/mL). The compounds comprised in this new class of PDCs are potential drug carrier candidates, since the conjugation of the βCD units to the P₃N₃ core through the primary face will not only serve as surface cover but, also, provide them the faculty to encapsulate various drugs inside the βCDs cavities. Full article

Rhodium complexes ligated by imidazolium-substituted phosphine were used as catalysts in the hydrosilylation of alkynes (1-heptyne, 1-octyne, and phenylacetylene) with 1,1,1,3,5,5,5-heptamethyltrisiloxane (HMTS) or triethylsilane (TES). In all cases, the above complexes showed higher activity and selectivity compared to their precursors ([Rh(PPh₃)₃Cl] and [{Rh(µ-Cl)(cod)}₂]). In the reactions with aliphatic alkynes (both when HMTS and TES were used as hydrosilylating agents), β(Z) isomer was mainly formed, but, in the reaction of phenylacetylene with TES, the β(E) product was formed. The catalysts are very durable, stable in air and first and foremost insoluble in the reactants which facilitated their isolation and permitted their multiple use in subsequent catalytic runs. They make a very good alternative to the commonly used homogeneous catalysts. Full article

Nanoparticles have emerged as versatile carriers for various therapeutics and can potentially treat a wide range of diseases in an accurate and disease-specific manner. Polymeric biomaterials have gained tremendous attention over the past decades, owing to their tunable structure and properties. Aliphatic polyesters have appealing attributes, including biodegradability, non-toxicity, and the ability to incorporate functional groups within the polymer backbone. Such distinctive properties have rendered them as a class of highly promising biomaterials for various biomedical applications. In this article, well-defined alkyne-functionalized poly(ethylene glycol)-b-poly(ε-caprolactone) (PEG-b-PCL) diblock copolymer was synthesized and studied for pH-responsive delivery of doxorubicin (DOX). The alkyne-functionalized PEG-b-PCL diblock copolymer was prepared by the synthesis of an alkyne-functionalized ε-caprolactone (CL), followed by ring-opening polymerization (ROP) using PEG as the macroinitiator. The alkyne functionalities of PEG-b-PCL were modified through copper(I)-catalyzed alkyne-azide cycloaddition (CuAAC) click reaction to graft aldehyde (ALD) groups and obtain PEG-b-PCL-g-ALD. Subsequently, DOX was conjugated on PEG-b-PCL-g-ALD through the Schiff base reaction. The resulting PEG-b-PCL-g-DOX polymer-drug conjugate (PDC) self-assembled into a nano-sized micellar structure with facilitated DOX release in acidic pH due to the pH-responsive linkage. The nanostructures of PDC micelles were characterized using transmission electron microscopy (TEM) and dynamic light scattering (DLS). In vitro studies of the PDC micelles, revealed their improved anticancer efficiency towards MCF-7 cells as compared to free DOX. Full article

Developing efficient solid acid catalysts for aqueous organic reactions is of great importance for the development of sustainable chemistry. In this work, a porous polymeric acid catalyst was synthesized via a solvothermal copolymerization and a successive ion-exchange method. Physicochemical characterizations suggested that the prepared polymers possessed large Brunauer-Emmett-Teller (BET) surface areas, a hierarchically porous structure, excellent surface amphiphilicity, and nice swelling properties. Notably, an activity test in phenylacetylene hydration indicated that the prepared solid acid exhibited high catalytic activity in water, which outperformed commercial amberlyst-15, sulfuric acid, and benzenesulfonic acid. Moreover, the prepared solid acid can be easily recovered and reused at least four times. Additionally, a variety of aromatic and aliphatic alkynes could be effectively transformed into corresponding ketones under optimal reaction conditions. Full article

The synthesis and characterization of novel gold(I) complexes containing hydrophilic ferrocenylphosphino sulfonate ligands, i.e., compounds [AuCl{(η⁵-C₅H₃PR₂(SO₃ⁱPr))Fe(η⁵-C₅H₅)}] (R = Ph (2a), p-Tol (2b), Cy (2c)), are presented, including a single-crystal X-ray diffraction study on 2a. Complexes 2a–c were checked as catalysts for the intermolecular addition of carboxylic acids to nonactivated internal alkynes using water as a green reaction medium. The best results in terms of activity were obtained with 2a in combination with AgOAc, which was able to promote the selective anti addition of a variety of aromatic, aliphatic, and α,β-unsaturated carboxylic acids to both symmetrical and unsymmetrical internal alkynes at 60 °C, employing metal loadings of only 2 mol %. Full article

A concise synthetic route from methylmalonate to a tetravalent aliphatic scaffold has been developed. The ensuing tetra-tethered derivative is equipped with two hydroxyl groups, as well as orthogonal alkene and alkyne functionalities. The usefulness of the scaffold has been demonstrated with the preparation of two representative multivalent derivatives: (i) a tetravalent compound containing two D-mannose units, one fluorescent boron-dipyrromethene (BODIPY) dye and a suitably functionalized amino acid and (ii) by way of dimerization and saponification, a water-soluble tetramannan derivative containing two fluorescent BODIPY units. Additionally, photophysical measurements conducted on these derivatives support the viability of the herein designed single and double BODIPY-labeled carbohydrate-based clusters as fluorescent markers. Full article

Amino-bridged gel polymer P1 was discovered to catalyze alkyne halo-functionalization in excellent yields, regioselectivity, functional group compatibility, and recyclability. We have observed that both aromatic and aliphatic alkynes can be converted to α,α-dihalogenated ketones in the presence of polymer P1 under metal-free conditions at room temperature within a short reaction time. Full article

Ene-yne cross-metathesis from alkynes and ethylene is a useful method to produce substituted conjugated butadiene derivatives. If this method has been used with aliphatic alkynes, it has however never been used starting from diarylacetylenes as internal alkynes. We show that the ene-yne cross-metathesis catalyzed by the second generation Hoveyda ruthenium catalyst provides the 2,3-diarylbuta-1,3-dienes under 3 atm of ethylene at 100 °C. The scope and limitations of the reaction have been evaluated starting from unsymmetrical functionalized diarylacetylene derivatives hence leading to unsymmetrical 2,3-diarylbuta-1,3-dienes in a straightforward and environmentally acceptable manner. Full article