Search Results (833)

Soil acidification, salinization, and heavy metal pollution pose serious threats to global food security and sustainable agricultural development. Biochar, with its high porosity, large surface area, and abundant functional groups, can effectively improve soil properties. However, due to variations in feedstocks and pyrolysis conditions, it may contain potentially harmful substances. Industrial wastes such as fly ash, steel slag, red mud, and phosphogypsum are rich in minerals and show potential for soil improvement, but direct application may pose environmental risks. The co-application of biochar with these wastes can produce composite amendments that enhance pH buffering capacity, nutrient availability, and pollutant immobilization. Therefore, a review of biochar-industrial waste composites as soil amendments is crucial for addressing soil degradation and promoting resource utilization of wastes. In this study, the literature was retrieved from Web of Science, Scopus, and Google Scholar using keywords including biochar, fly ash, steel slag, red mud, phosphogypsum, combined application, and soil amendment. A total of 144 articles from 2000 to 2025 were analyzed. This review summarizes the physicochemical properties of biochar and representative industrial wastes, including pH, electrical conductivity, surface area, and elemental composition. It examines their synergistic mechanisms in reducing heavy metal release through adsorption, complexation, and ion exchange. Furthermore, it evaluates the effects of these composites on soil health and crop productivity, showing improvements in soil structure, nutrient balance, enzyme activity, and metal immobilization. Finally, it identifies knowledge gaps as well as future prospects and recommends long-term field trials and digital agriculture technologies to support the sustainable application of these composites in soil management. Full article

Mining waste presents significant environmental and public health risks due to the potential release of toxic substances when improperly managed. In this study, four tailings samples were taken to evaluate the environmental risks in the Ponce Enríquez mining area in Ecuador. Chemical characterization and X-ray Fluorescence Spectrometry (XRF) were used to analyze the content of potentially toxic elements (PTEs) of interest (As, Cd, Cr, Cu, Ni, Pb, and Zn), and X-ray Diffraction (XRD) for mineralogical characterization. The contamination index (IC) was calculated to assess the potential hazard associated with the content of PTEs in the mining wastes. To assess environmental risks, leaching tests were carried out to evaluate the potential release of PTEs, and Acid-Base Accounting (ABA) tests were conducted to determine the likelihood of acid mine drainage formation. The results revealed that the PETs concentration exceeded the maximum permissible limits in all samples, according to Ecuadorian regulations: As, Pb, and Cd were identified as critical contaminants. Mineralogically, quartz was the dominant phase, followed by carbonates (calcite, dolomite and magnesite), phyllosilicates (chlorite and illite), and minor amounts of pyrite and talc. The IC indicated high to very high contamination risk levels, with As being the predominant contributor. Although leaching tests met the established limits for non-hazardous mining waste, the ABA test showed that all samples had a high potential for long-term acid generation. These results underscore the need for implementing management strategies to mitigate the environmental impacts and the development of plans to protect local ecosystems and communities from the adverse effects of mining activities. Full article

Objectives: This research focuses on the development of fabrication approaches for microparticles intended for controlled drug delivery. The primary objective is to identify the most suitable polymer type, particle size, and morphology for encapsulating a water-soluble crystalline drug. Optimizing these parameters may enhance structural stability and prolong the release of this active substance. Methods: The microparticles were fabricated through the encapsulation of a drug substance within a polymer carrier and employing polymer casting on prepatterned surfaces, followed by the loading of drug precipitates and the application of a sealing layer. The crystalline powder 1-allyl-2,5-dimethylpiperidol-4 hydrochloride served as the core cargo material, while the walls of these particles were composed of polylactic acid (PLA) and a poly (α-caprolactone) (PCL) in a 70:30 composition ratio. Results: The size and volume of the microparticles were found to be dependent on the geometric parameters of the template and the concentration of the polymer solutions. The study demonstrates the formation, physical dimensions, and particle count at varied polymer compositions and concentrations. The formation of the PLA and PCL mixture occurred solely through physical interactions. Scanning electron microscopy (SEM) and optical microscopy were employed to observe the appearance and physical dimensions of the microparticles. The obtained data confirm that tailored polymer compositions can yield consistent particle morphology and a suitable drug elution rate. Conclusions: The results indicate that microparticles sealed with an optimal polymer composition exhibit enhanced release properties. This finding highlights the feasibility of microencapsulation at precise ratios and concentrations of polymers to achieve the long-lasting effects of water-soluble drugs. Full article

Volcanic eruptions release gases and particulates that may adversely affect human health. The Tajogaite eruption on La Palma provided a unique opportunity to evaluate inorganic pollutant exposure in a directly affected population. As part of the ISVOLCAN study, blood samples from 393 adults residing in the island’s western region were analyzed for 43 inorganic elements using Inductively Coupled Plasma Mass Spectrometry (ICP-MS), including 20 toxic elements identified by the Agency for Toxic Substances and Disease Registry (ATSDR). The median age of participants was 51 years, and 56.7% were female. Higher levels of Hg and Mn were associated with long-term occupational exposure, while smoking was linked to elevated Cd, Pb, and Sr levels. Participants living within 6.5 km of the volcano had significantly higher concentrations of Al and Ti. Ash cleanup activities were associated with increased levels of Ni and Cu, and those spending over five hours outdoors daily showed elevated Se and Pb. This is the first biomonitoring study to assess blood concentrations of inorganic pollutants in a population exposed to volcanic emissions. The findings highlight key exposure factors and underscore the need for continued research to assess long-term health effects and inform public health measures. Full article

The study of the effects of 2.45 GHz electromagnetic fields on the health and safety of people and organisms as a whole is essential due to their widespread use in everyday life. It is known that they can cause thermal and non-thermal effects—at the molecular, cellular and organismal level. Yeast suspensions were treated with 2.45 GHz microwave radiation in the near-field of antenna at two distances (2 and 4 cm) and two time periods (20 and 60 min)—setups resembling the use of mobile devices. The release of UV-absorbing substances from the cells was studied as an indicator of membrane permeabilization, total intracellular antioxidant activity and reduced glutathione were determined, and a comet assay for damage to the DNA was performed. A correlation between reduced antioxidants and increased membrane permeability during EMF treatment was observed at a distance of 2 cm for 20 min, suggesting the presence of oxidative stress, while a similar effect was not observed with conventional heating. Slightly increased membrane permeability was observed after irradiation for 60 min at a distance of 4 cm, but this was not related to the antioxidant status of the cells. A trend towards increased DNA damage was observed under both conditions. Full article

Vibrio species are among the primary pathogenic bacteria affecting abalone aquaculture, posing significant threats to farming practices. Current clinical control predominantly relies on antibiotics, which can result in antibiotic residues in both abalone and the surrounding marine environments. Lactobacillus plantarum (LP) has been shown to release bioactive antagonistic substances and exhibits potent inhibitory effects against marine pathogenic bacteria. This study aimed to screen and characterize the probiotic properties of LP strains isolated from rice wine lees to develop a novel biocontrol strategy against Vibriosis in abalone. The methods employed included selective media cultivation, streak plate isolation, and single-colony purification for strain screening, followed by Gram staining, 16S rDNA sequencing, and phylogenetic tree construction using MEGA11 for identification. The resilience, antimicrobial activity, and in vivo antagonistic efficacy of the strains were evaluated through stress tolerance assays, agar diffusion tests, and animal experiments. The results demonstrated the successful isolation and purification of four LP strains (NDMJ-1 to NDMJ-4). Phylogenetic analysis revealed closer genetic relationships between NDMJ-3 and NDMJ-4, while NDMJ-1 and NDMJ-2 were found to be more distantly related. All strains exhibited γ-hemolytic activity, bile salt tolerance (0.3–3.0%), and resistance to both acid (pH 2.5) and alkali (pH 8.5), although they were temperature sensitive (inactivated above 45 °C). The strains showed susceptibility to most of the 20 tested antibiotics, with marked variations in hydrophobicity (1.91–93.15%) and auto-aggregation (13.29–60.63%). In vitro antibacterial assays revealed that cell-free supernatants of the strains significantly inhibited Vibrio parahaemolyticus, V. alginolyticus, and V. natriegens, with NDMJ-4 displaying the strongest inhibitory activity. In vivo experiments confirmed that NDMJ-4 significantly reduced mortality in abalone infected with V. parahaemolyticus. In conclusion, the LP strains isolated from rice wine lees (NDMJ-1 to NDMJ-4) possess robust stress resistance, adhesion capabilities, and broad antibiotic susceptibility. Their metabolites exhibit significant inhibition against abalone-pathogenic Vibrios, particularly NDMJ-4, which demonstrates exceptional potential as a candidate strain for developing eco-friendly biocontrol agents against Vibriosis in abalone aquaculture. Full article

This study investigated sustainable activation strategies for residual slag micro powder derived from recycled waste concrete aggregates, aiming to advance circular economy principles in construction materials. An experimental study was carried out to explore the activation mechanisms of slag micro powder from recycled waste concrete aggregates to enhance its utility in building materials. Three methods—mechanical grinding, high-temperature calcination, and mechanical grinding–thermal activation—were evaluated comparatively. The results showed high-temperature calcination at 750 °C for 10 min proved most effective, achieving a 95.85% activity index. High-temperature calcination may contribute to the release of active SiO₂ and Al₂O₃ substances of slag micro powder, thereby improving the hydration performance of slag micro powder and its cement mortar’s compressive strength. The flexural strength of cement mortar after different activation treatments was also analyzed. Mechanical grinding alone showed limited benefits, only achieving a less than 65.59% activity index, while the combined method negatively impacted the mechanical properties of cement mortar samples. An SEM (scanning electron microscope) and EDS (energy dispersive X-ray spectrometer) microstructural analysis supported these findings, highlighting enhanced hydration product formation after calcination at 750 °C for 10 min. This work may contribute to sustainable construction practices through the resource-efficient utilization of industrial by-products. Full article

When lithium-ion batteries experience thermal runaway, a large amount of heat rapidly accumulates inside, causing the internal pressure to rise sharply. Once the pressure exceeds the battery’s safety valve design capacity, the valve activates and releases flammable gas. If ignited in a high-temperature environment, the escaping gas can cause a jet fire containing high-temperature substances. Effectively controlling the internal temperature of the jet fire, especially rapidly cooling the core area of the flame during the jet process, is important to prevent the spread of lithium-ion battery fires. Therefore, this work proposes a strategy of a synergistic effect using microcapsule fire extinguishing agents and fine water mist to achieve an external barrier and an internal attack. The microcapsule fire extinguishing agents are prepared by using melamine–urea–formaldehyde resin as the shell and 1,1,1,2,2,3,3,4,4-nonafluoro-4-methoxybutane (C₅H₃F₉O) and 1,1,2,2,3,3,4-heptafluorocyclopentane (C₅H₃F₇) as the composite core. During the process of lithium-ion battery thermal runaway, the microcapsule fire extinguishing agents can enter the inner area of the jet fire under the protection of the fine water mist. The microcapsule shell ruptures at 100 °C, releasing the highly effective composite fire suppressant core inside the jet fire. The fine water mist significantly blocks the transfer of thermal radiation, inhibiting the spread of the fire. Compared to the suppression with fine water mist only, the time required to reduce the battery temperature from the peak value to a low temperature is reduced by 66 s and the peak temperature of the high-temperature substances above the battery is reduced by 228.2 °C. The propagation of the thermal runaway is suppressed, and no thermal runaway of other batteries around the faulty unit will occur. This synergistic suppression strategy of fine water mist and microcapsule fire extinguishing agent (FWM@M) effectively reduces the adverse effects of jet fires on the propagation of thermal runaway (TR) of lithium-ion batteries, providing a new solution for efficiently extinguishing lithium-ion battery fires. Full article

Background/Objectives: In recent years, increasing attention has been paid to the stabilization of natural biologically active compounds in order to expand their application in the food, pharmaceutical, and cosmetic industries. Such compounds, such as polyphenols, essential fatty acids, or vitamins, are extremely sensitive to environmental factors. This study aims to review the spray-drying-based microencapsulation technology and its application for stabilizing sensitive biologically active substances. Methods: This article systematically analyzes the main steps of the spray-drying microencapsulation process and discusses traditional and innovative wall materials, including natural polymers (polysaccharides and proteins), as well as new raw material sources (e.g., yeast cells, canola and pea protein isolates, and hemicelluloses). It also examines the potential of these systems for the stimulated release of active ingredients. Results: This review provides a comprehensive overview of the main stages of the spray-drying process and critically examines both conventional (e.g., maltodextrin and gum Arabic) and innovative wall materials (e.g., plant-based proteins and food industry by-products). Studies show that using different wall materials can achieve high encapsulation efficiency, improve the stability of biologically active substances, and control their release. Various compounds have been successfully microencapsulated—polyphenols, essential oils, carotenoids, fatty acids, and vitamins—protecting them from oxidation, light, and temperature. The review identifies key factors that can enhance product quality, increase encapsulation yield, and reduce processing costs and energy input—offering meaningful insights for optimizing the microencapsulation process. Conclusions: Spray-drying-based microencapsulation is an advanced technology that effectively protects sensitive active ingredients and allows for wider industrial food, pharmaceutical, and cosmetic applications. In the future, more attention is expected to be paid to personalized formulations, stimulated release systems, and sustainable wall materials from by-products. Full article

The present study describes the mechanochemical synthesis and physicochemical characterization of a novel composite material composed of yellow clay, hydroxyapatite, and Clitoria ternatea L. The synthesis was carried out using a solvent-free, energy-efficient mechanochemical method. The composite was analyzed for its toxicity, particle size distribution, release of bioactive compounds, surface morphology, structural features, and electrokinetic properties. UV-VIS spectrophotometry revealed that the release of bioactive substances was approximately 1.5 to 3 times higher in the composite compared to control samples. Particle size analysis indicated a wide distribution ranging from 350 to 1300 nm. Nitrogen adsorption–desorption (ASAP) confirmed the porous nature of the material, while SEM and FTIR analyses verified the successful incorporation of all components. Electrokinetic studies showed zeta potential values ranging from +15 mV to –32 mV, indicating varying colloidal stability. The proposed composite demonstrates promising potential as a carrier of biologically active substances for pharmaceutical and cosmetic applications. Full article

Background/Objectives: In this study, we present a green, scalable platform for the production of water-dispersible powders co-encapsulating the lipophilic bioactives curcumin (Cur) and eugenol (Eug) within the amphiphilic polymer Soluplus^® (SP) via low-temperature spray drying. Methods: The amount of Cur (1%, 5%, and 10%) and Eug (5%, 10%, 15%, and 20%) was varied to achieve single- and double-loaded water-soluble powders with the maximum amount of active substances. The powders containing a higher loading of Cur, 5% and 10% (and Eug), were obtained from water/ethanol mixtures (2:1 and 5:1 v/v ratio), while the formulation with 1% of Cur was spray-dried by using water as a solvent. Results: By leveraging aqueous or aqueous–ethanolic feed systems, we achieved high loading of the bioactive substances—up to 10% Cur and 20% Eug (w/w)—while minimizing organic solvent use. Myo-inositol was incorporated as a stabilizing excipient to modulate particle morphology, improve powder flowability, and enhance redispersibility. Physicochemical characterization revealed nanoscale micellization (53–127 nm), amorphization of both actives as confirmed by XRD and DSC, and the absence of crystalline residue. Encapsulation efficiencies exceeded 95% for Cur and 93% for Eug. Dissolution tests demonstrated a rapid release from the 5% Cur/5% Eug formulation (>85% in 5 min), while higher-loaded single-formulations showed progressively slower release (up to 45 min). Conclusions: This work demonstrates a robust and environmentally responsible encapsulation strategy, suitable for delivering poorly water-soluble phytochemicals with potential applications in oral nutraceuticals and pharmaceutical dosage forms. Full article

In this study, a one-pot, ultrasonic-assisted solvothermal method was successfully employed to prepare three copper-containing compounds: copper benzene-1,3,5-tricarboxylate (Cu₃(BTC)₂), copper powder, and copper-metalized activated carbon (Cu@AC). This method is efficient and safe and has potential for use in scalable production. The characteristics of the resulting products were analyzed using various techniques, including X-ray diffraction (XRD), scanning electron microscopy (SEM), specific surface area measurement along with pore size distribution, and thermogravimetric analysis–differential scanning calorimetry (TG-DSC). Additionally, the catalytic effects of these products on the thermal decomposition of ammonium perchlorate (AP) were evaluated. All three substances were found to lower the thermal decomposition temperature of AP and enhance heat release. Cu₃(BTC)₂ demonstrated exceptional catalytic performance and compatibility with AP, as shown using the vacuum stability test (VST). The thermal analysis results indicated that the thermal decomposition temperature and apparent activation energy of AP decreased from ~442 °C to around 340 °C and from ~207 kJ mol⁻¹ to approximately 128 kJ mol⁻¹, respectively, when 3 wt% Cu₃(BTC)₂ was contained in AP. Moreover, the heat released via the exothermic decomposition of AP increased from 740 J g⁻¹ to1716 J g⁻¹. A possible reaction mechanism is proposed based on the evolved gas analysis (EGA) findings to explain the observed catalytic effects. Full article

Electron paramagnetic resonance (EPR) spectroscopy is gaining increasing recognition in research on various nanostructures. In the case of iron oxide nanoparticles, EPR measurements offer the possibility of determining the magnetic phase and the exact type (Fe₃O₄, γ-Fe₂O₃, α-Fe₂O₃, or a combination) of the core material. Furthermore, the EPR technique enables the study of relaxation processes, estimation of the effective and surface anisotropy constants, and assessment of the influence of sample aging on the magnetic properties of nanoparticles. The scope of the information obtained can be further expanded by utilizing spin labeling of polymer-coated nanoparticles. By analyzing the signals from the attached nitroxide, one can determine certain properties of the coating and its interactions with the environment (e.g., body fluids, cells, tissues) and also perform imaging of nanoparticles in various media. In some cases, EPR can help monitor the encapsulation of active substances and their release processes. Unfortunately, despite the enormous potential, not all of the possibilities offered by EPR are routinely used in nanoscience. Therefore, the present article aims not only to present the current applications and existing trends but also to indicate directions for future EPR research, constituting a road map. Full article

In the present study, the primary by-products of the hemp-seed oil process—hemp seed cake flour and hemp seed protein concentrate—underwent enzymatic hydrolysis using proteases and carbohydrases, either individually or in combination. The effectiveness of these enzymatic treatments in releasing bioactive compounds was evaluated by assessing the antioxidant and anti-inflammatory properties of the aqueous extracts of both hydrolysed and untreated hemp by-products. The aim was to explore their potential senotherapeutic properties and promote their application as dietary supplements. Secondary metabolites such as flavonoids, phenolic acids, and catechins were analysed using high-performance liquid chromatography. Total phenolic, flavonoid, and protein contents were determined using spectrophotometric methods. Scavenging activity (2,2-Diphenyl-1-picrylhydrazyl scavenging assay (DPPH assay)), antioxidant power (Ferric reducing antioxidant power assay (FRAP assay)), and lipid peroxidation-reducing activity (thiobarbituric acid-reactive substance analysis) were assessed through in vitro assays. Possible anti-inflammatory effects were evaluated by assessing haemolysis inhibition. The impact of extracts on albumin glycation induced by exposure to fructose was also determined. To assess the toxicity of extracts, a zebrafish larvae model was employed. All extracts contained significant amounts of phenolic compounds, flavonoids, and proteins, and they exhibited notable activities in reducing lipid peroxidation and stabilising erythrocyte cell membranes. However, they did not significantly influence protein glycation (the glycation inhibition was only in the range of 15–40%). Our research demonstrates the substantial health-promoting potential, including senescence delay, of aqueous extracts from by-products of the hemp-seed oil process, which are available in large quantities and can serve as valuable supplements to support the health of animals, including humans, rather than being discarded as waste from oil production. Full article

Background/Objectives: This study investigates the physical, rheological, and antioxidant properties of nano-liposomal formulations encapsulating Fumaria officinalis L. (fumitory) extract, focusing on their stability and performance under ultraviolet (UV) exposure, as well as polyphenol release within simulated skin conditions in a Franz diffusion cell. Methods: Liposomal formulations, composed of phospholipids with or without β-sitosterol or ergosterol, were evaluated for their encapsulation efficiency, liposome size, size distribution, zeta potential, viscosity, surface tension, density, oxidative stability, antioxidant capacity, and polyphenol recovery. Results: Encapsulation efficiency was the highest in phospholipid liposomes (72.2%) and decreased with the incorporation of sterols: 66.7% for β-sitosterol and 62.9% for ergosterol liposomes. Encapsulation significantly increased viscosity and reduced surface tension compared to the plain liposomes, suggesting modified interfacial behavior. The inclusion of fumitory extract significantly increased the viscosity of liposomes (from ~2.5 to 6.09–6.78 mPa × s), consistent with the observed reduction in particle size and zeta potential. Antioxidant assays (thiobarbituric acid reactive substances—TBARS, 2,2′-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid—ABTS, and 2,2-diphenyl-1-picrylhydrazyl—DPPH) confirmed enhanced lipid peroxidation inhibition and radical scavenging upon encapsulation, with ABTS activity reaching up to 95.05% in sterol-containing liposomes. Release studies showed that the free extract exhibited the fastest polyphenol diffusion (5.09 × 10⁻⁹ m²/s), while liposomes demonstrated slower/controlled release due to bilayer barriers. UV-irradiated liposomes released more polyphenols than untreated ones, particularly in the sterol-containing formulations, due to oxidative destabilization and pore formation. Conclusions: These findings highlight the potential of fumitory extract-loaded liposomes as stable, bioactive carriers with tunable polyphenol antioxidant release properties for dermal applications. Overall, liposomal formulations of fumitory extract exhibit significant potential for further development as a pharmaceutical, cosmetic, or dermo-cosmetic ingredient for use in the prevention and treatment of various skin disorders. Full article