Search Results (813)

This paper presents an optimization-based method to support distribution system operators (DSOs) in planning large-scale photovoltaic (PV) integration at the medium-voltage (MV) level. The PV hosting capacity (PV-HC) problem is formulated as a mixed-integer quadratically constrained program (MIQCP) without linearizing approximations to determine PV sizes and locations while enforcing operating limits and planning constraints, including candidate PV locations, per-unit PV capacity limits, active power exchange with the upstream grid, and PV power factor. Our method defines two HC solution classes: (i) sparse solutions, which allocate the PV capacity to a limited subset of candidate nodes, and (ii) non-sparse solutions, which are derived from locational hosting capacity (LHC) computations at all candidate nodes, and are then aggregated into conservative zonal HC values. The approach is implemented in a Hosting Capacity–Distribution Planning Tool (HC-DPT) composed of a Python–AMPL optimization environment and a Python–OpenDSS probabilistic evaluation environment. The worst-case operating conditions are obtained from probabilistic models of demand and solar irradiance, and Monte Carlo simulations quantify the performance under uncertainty over a representative daily window. To support integrated assessment, the index $G_{\exp }$ is introduced to jointly evaluate exported energy and changes in local distribution losses, enabling a system-level interpretation beyond loss variations alone. A strategy was also proposed to derive worst-case scenarios from zonal HC solutions to bound performance metrics across multiple PV integration schemes. Results from a real MV case study show that PV location policies, export constraints, and zonal HC definitions drive differences in losses, exported energy, and solution quality while maintaining computation times compatible with DSO planning workflows. Full article

This paper presents two enhanced variants of the Artificial Protozoa Optimizer (APO), namely the Adaptive Balanced Artificial Protozoa Optimizer (AB-APO) and the Fractional Calculus-Enhanced Artificial Protozoa Optimizer (FC-APO), for optimal multi-Distributed Energy Resources (DERs) planning in smart radial distribution networks. The proposed framework addresses the coordinated allocation of Electric Vehicle Charging Stations (EVCSs), photovoltaic (PV) units, and Battery Energy Storage Systems (BESS). The AB-APO introduces an adaptive balancing mechanism that dynamically regulates exploration and exploitation to improve convergence stability and robustness, while the FC-APO incorporates fractional-order dynamics to embed long-memory effects, enhancing numerical stability and search smoothness. The proposed optimizers are evaluated on the IEEE-33 and IEEE-69 bus systems under eight DERs penetration scenarios. Simulation results demonstrate significant reductions in real and reactive power losses, improved voltage profiles, and effective mitigation of EV-induced network stress. Real power loss reductions exceeding 54%, 38.53%, 53.78%, 38.20%, 61.68%, and 60.72% are achieved for the IEEE-33 system, while reductions of 64.32%, 63.51%, 64.33%, 63.51%, 67.31%, and 67.04% are obtained for the IEEE-69 system across Scenarios 3–8. Overall, the results highlight the effectiveness of adaptive balancing and fractional-order modeling in strengthening APO-based optimization and confirm the suitability of the AB-APO and FC-APO as efficient planning tools for future smart distribution networks. Full article

Background/Objectives: Data on the perpetrators of workplace violence (WPV) in healthcare settings are lacking. We sought to identify characteristics of perpetrators of WPV in a United States emergency department (ED) and explore associations between patient demographics and acute visit features. Methods: This is a retrospective descriptive study of the perpetrators of WPV against ED healthcare workers (HCWs) identified in a previous prospective study. Perpetrator demographics and visit features are described. Regression analyses were performed to assess for associations between perpetrator demographics and visit features with physical violence (PV) and restraint use. Results: 91 WPV encounters were included. The average age was 44.8 years. Most patients (n = 48; 53%) did not have an active psychiatric complaint and were not intoxicated, but 71 (78%) had a history of psychiatric illness. Twenty-four events (26%) involved PV, which was more common among patients on an emergency detention (RR 2.18; 95% CI 1.12–4.23) but was not associated with any patient demographics after adjustment. Restraints were ordered in 33 (36%) patients. Age, sex, PV, and intoxication or active psychiatric complaints were associated with restraint use, but in adjusted analysis, only PV (RR 1.89; 95% CI 1.13–3.16) and active psychiatric complaint or intoxication (RR 2.26; 95% CI 1.21–4.22) remained associated with restraint use. Conclusions: Half of perpetrators in this study were neither intoxicated nor had an active psychiatric complaint. PV was more common among patients on emergency detention. Restraint use was more likely in PV events and patients who were intoxicated or had psychiatric complaints. Full article

We propose the Hybrid Spatio-Temporal Transformer with Multi-Branch CNN/RNN and Extreme-Event Head (HST–MB–CREH), a hybrid spatio-temporal deep learning architecture for joint short-term photovoltaic (PV) power forecasting and the detection of rare extreme events, to support the reliable operation of renewable-rich power systems. The model combines a spatio-temporal transformer encoder with three convolutional neural network (CNN)/recurrent neural network (RNN) branches (CNN → long short-term memory (LSTM), LSTM → gated recurrent unit (GRU), CNN → GRU) and a dense pathway for tabular meteorological and calendar features. A multitask output head simultaneously performs the regression of PV power and binary classification of extremes defined above the 95th percentile. We evaluate HST–MB–CREH on the publicly available Renewable Power Generation and Weather Conditions dataset with hourly resolutions from 2017 to 2022, using a 5-fold TimeSeriesSplit protocol to avoid temporal leakage and to cover multiple seasons. Compared with tree ensembles (RandomForest, XGBoost), recurrent baselines (Stacked GRU, LSTM), and advanced hybrid/transformer models (Hybrid Multi-Branch CNN–LSTM/GRU with Dense Path and Extreme-Event Head (HMB–CLED) and Spatio-Temporal Multitask Transformer with Extreme-Event Head (STM–EEH)), the proposed architecture achieves the best overall trade-off between accuracy and rare-event sensitivity, with normalized performance of RMSE_z = 0.2159 ± 0.0167, MAE_z = 0.1100 ± 0.0085, mean absolute percentage error (MAPE) = 9.17 ± 0.45%, R² = 0.9534 ± 0.0072, and AUC_ext = 0.9851 ± 0.0051 across folds. Knowledge extraction is supported via attention-based analysis and permutation feature importance, which highlight the dominant role of global horizontal irradiance, diurnal harmonics, and solar geometry features. The results indicate that hybrid spatio-temporal multitask architectures can substantially improve both the forecast accuracy and robustness to extremes, making HST–MB–CREH a promising building block for intelligent decision-support tools in smart grids with a high share of PV generation. Full article

High penetration and output volatility of island wind and photovoltaics (PV) pose challenges to energy consumption and supply–demand balance, and cost-effective energy storage configuration. A coupled dispatch model for a wind–PV–storage system is proposed, which treats multiple canal units as virtual ‘loads’ that switch between generation and pumping under constraints of power balance and available water head model. Considering the variable reservoir–irrigation feature, a multi-objective model framework is developed to minimize both economic cost and storage capacity required. An augmented Lagrangian–Nash product enhanced NSGA-II (AL-NP-NSGA-II) algorithm enforces constraints of irrigation shortfall and overflow via an augmented Lagrangian term and allocates fair benefits across canal units through a Nash product reward. Moreover, updates of Lagrange multipliers and reward weights maintain power balance and accelerate convergence. Finally, a case simulation (3.7 MW wind, 7.1 MW PV, and 24 h rural load) is performed, where 440.98 kWh storage eliminates shortfall/overflow and yields 1.5172 × 10⁴ CNY. Monte Carlo uncertainty analysis (±10% perturbations in load, wind, and PV) shows that increasing storage to 680 kWh can stabilize reliability above 98% and raise economic benefit to 1.5195 × 10⁴ CNY. The dispatch framework delivers coordination of irrigation and power balance in island microgrids, providing a systematic configuration solution. Full article

The optimal allocation of Photovoltaic (PV) and wind-based renewable energy sources and Battery Energy Storage System (BESS) capacity is an important issue for efficient operation of a microgrid network (MGN). The impact of the unpredictability of PV and wind generation needs to be smoothed out by coherent allocation of BESS unit to meet out the load demand. To address these issues, this article proposes an efficient Energy Management System (EMS) and Demand Side Management (DSM) approaches for the optimal allocation of PV- and wind-based renewable energy sources and BESS capacity in the MGN. The DSM model helps to modify the peak load demand based on PV and wind generation, available BESS storage, and the utility grid. Based on the Real-Time Market Energy Price (RTMEP) of utility power, the charging/discharging pattern of the BESS and power exchange with the utility grid are scheduled adaptively. On this basis, a Jellyfish Search Algorithm (JSA)-based bi-level optimization model is developed that considers the optimal capacity allocation and power scheduling of PV and wind sources and BESS capacity to satisfy the load demand. The top-level planning model solves the optimal allocation of PV and wind sources intending to reduce the total power loss of the MGN. The proposed JSA-based optimization achieved 24.04% of power loss reduction (from 202.69 kW to 153.95 kW) at peak load conditions through optimal PV- and wind-based DG placement and sizing. The bottom level model explicitly focuses to achieve the optimal operational configuration of MGN through optimal power scheduling of PV, wind, BESS, and the utility grid with DSM-based load proportions with an aim to minimize the operating cost. Simulation results on the IEEE 33-node MGN demonstrate that the 20% DSM strategy attains the maximum operational cost savings of €ct 3196.18 (reduction of 2.80%) over 24 h operation, with a 46.75% peak-hour grid dependency reduction. The statistical analysis over 50 independent runs confirms the sturdiness of the JSA over Particle Swarm Optimization (PSO) and Osprey Optimization Algorithm (OOA) with a standard deviation of only 0.00017 in the fitness function, demonstrating its superior convergence characteristics to solve the proposed optimization problem. Finally, based on the simulation outcome of the considered bi-level optimization problem, it can be concluded that implementation of the proposed JSA-based optimization approach efficiently optimizes the PV- and wind-based resource allocation along with BESS capacity and helps to operate the MGN efficiently with reduced power loss and operating costs. Full article

This study investigates a water–energy investment in the Consorzio di Bonifica della Romagna Occidentale (Northern Italy) over the period 2015–2022, analysing how integrated irrigation and energy infrastructures can support agricultural resilience. In this area, pressurised irrigation systems are increasingly replacing traditional gravity-fed networks, enabling precise water distribution. However, their energy intensity raises operational costs and exposure to volatile electricity prices. To address these challenges, the research evaluates the coupling of pressurised irrigation with floating photovoltaic (PV) systems on irrigation reservoirs. Using plot-level economic data for vineyards and orchards, the analysis shows that, although pressurised systems entail higher costs in terms of Relative Water Cost (RWC) and Economic Water Productivity Ratio (EWPR), integrating them with PV production significantly improves economic performance. The findings show an average reduction in RWC of 1.44% for vineyards and 5.52% for orchards, and an average increase in EWPR of 38.51 units for vineyards and 24.81 units for orchards. This suggests that combining efficient irrigation systems with renewable energy could represent a viable pathway toward more sustainable water management. Policy implications may concern incentives for joint water–energy investments, adjustments to zero-injection rules, and broader reforms in agricultural, energy, and environmental policies. Full article

With growing community awareness of greenhouse gas emissions and their environmental consequences, distributed rooftop photovoltaic (PV) systems have emerged as a sustainable energy alternative in residential settings. However, the high penetration of these systems without effective operational strategies poses significant challenges for local distribution grids. Specifically, the estimation of surplus energy production from these systems, closely linked to complex outdoor weather conditions and seasonal fluctuations, often lacks an accurate forecasting approach to effectively capture the temporal dynamics of system output during peak periods. In response, this study proposes a recurrent neural network (RNN)- based forecasting framework to predict rooftop PV surplus in the context of micro-residential communities over time horizons not exceeding 48 h. The framework includes standard RNN, long short-term memory (LSTM), bidirectional LSTM (BiLSTM), and gated recurrent unit (GRU) networks. In this context, the study employed estimated surplus energy datasets from six single-family detached houses, along with weather-related variables and seasonal patterns, to evaluate the framework’s effectiveness. Results demonstrated the significant effectiveness of all framework models in forecasting surplus energy across seasonal scenarios, with low MAPE values of up to 3.02% and 3.59% over 24-h and 48-h horizons, respectively. Simultaneously, BiLSTM models consistently demonstrated a higher capacity to capture surplus energy fluctuations during peak periods than their counterparts. Overall, the developed data-driven framework demonstrates potential to enable short-term smart energy scheduling in micro-residential communities, supporting electric vehicle charging from single-family detached houses through efficient rooftop PV systems. It also provides decision-making insights for evaluating renewable energy contributions in the residential sector. Full article

The increasing penetration of variable renewable energy sources intensifies grid imbalance and challenges the reliability of small-scale power systems. This study addresses these challenges by developing and analyzing a fully integrated hybrid energy system that combines biogas upgrading to biomethane, photovoltaic (PV) generation, hydrogen production via alkaline electrolysis, hydrogen storage, and a gas-steam combined cycle (CCGT). The system is designed to supply uninterrupted electricity to a small municipality of approximately 4500 inhabitants under predominantly self-sufficient operating conditions. The methodology integrates high-resolution, full-year electricity demand and solar resource data with detailed process-based simulations performed using Aspen Plus, Aspen HYSYS, and PVGIS-SARAH3 meteorological inputs. Surplus PV electricity is converted into hydrogen and stored, while upgraded biomethane provides dispatchable backup during periods of low solar availability. The gas-steam combined cycle enables flexible and efficient electricity generation, with hydrogen blending supporting dynamic turbine operation and further reducing fossil fuel dependency. The results indicate that a 10 MW PV installation coupled with a 2.9 MW CCGT unit and a hydrogen storage capacity of 550 kg is sufficient to ensure year-round power balance. During winter months, system operation is sustained entirely by biomethane, while in high-solar periods hydrogen production and storage enhance operational flexibility. Compared to a conventional grid-based electricity supply, the proposed system enables near-complete elimination of operational CO₂ emissions, achieving an annual reduction of approximately 8800 tCO₂, corresponding to a reduction of about 93%. The key novelty of this work lies in the simultaneous and process-level integration of biogas, hydrogen, photovoltaic generation, energy storage, and a gas-steam combined cycle within a single operational framework, an approach that has not been comprehensively addressed in the recent literature. The findings demonstrate that such integrated hybrid systems can provide dispatchable, low-carbon electricity for small communities, offering a scalable pathway toward resilient and decentralized energy systems. Full article

Accurate short-term forecasting of photovoltaic (PV) output is critical to managing the variability of PV generation and ensuring reliable grid operation with high renewable integration. We propose an enhanced hybrid deep learning framework that combines Temporal Convolutional Networks (TCNs), Gated Recurrent Units (GRUs), and Random Forests (RFs) in an optimized weighted ensemble strategy. This approach leverages the complementary strengths of each component: TCNs capture long-range temporal dependencies via dilated causal convolutions; GRUs model sequential weather-driven dynamics; and RFs enhance robustness to outliers and nonlinear relationships. The model was evaluated on high-resolution operational data from the Yulara solar plant in Australia, forecasting horizons from 5 min to 1 h. Results show that the TCN-GRU-RF model consistently outperforms conventional benchmarks, achieving R² = 0.9807 (MAE = 0.0136; RMSE = 0.0300) at 5 min and R² = 0.9047 (RMSE = 0.0652) at 1 h horizons. Notably, the degradation in R² across forecasting horizons was limited to 7.7%, significantly lower than the typical 10–15% range observed in the literature, highlighting the model’s scalability and resilience. These validated results indicate that the proposed approach provides a robust, scalable forecasting solution that enhances grid reliability and supports the integration of distributed renewable energy sources. Full article

In photovoltaic (PV) power generation, the intermittency and uncertainty caused by meteorological factors pose challenges to grid operations. Accurate PV power prediction is crucial for optimizing power dispatching and balancing supply and demand. This paper proposes a PV power prediction model based on Density Peak Clustering Algorithm (DPCA)–Crested Porcupine Optimizer (CPO)–Random Forest (RF)–Gated Recurrent Unit (GRU)–Kolmogorov–Arnold Network (KAN). First, the DPCA is used to accurately classify weather conditions according to meteorological data such as solar radiation, temperature, and humidity. Then, the CPO algorithm is established to optimize the factor screening characteristic variables of the RF. Subsequently, a hybrid GRU model with a KAN layer is introduced for short-term PV power prediction. The Shapley Additive Explanation (SHAP) method values evaluating feature importance and the impact of causal features. Compared with other contrast models, the DPCA-CPO-RF-KAN-GRU model demonstrates better error reduction capabilities under three weather types, with an average fitting accuracy R² reaching 97%. SHAP analysis indicates that the combined average SHAP value of total solar radiation and direct solar radiation contributes more than 70%. Finally, the Kernel Density Estimation (KDE) is utilized to verify that the KAN-GRU model has high robustness in interval prediction, providing strong technical support for ensuring the stability of the power grid and precise decision-making in the electricity market. Full article

To enhance the power supply resilience of distribution networks with high-penetration distributed photovoltaic (PV) integration during extreme disasters, deploying Mobile Energy Storage Systems (MESSs) proves to be an effective countermeasure. This paper proposes an optimized operational strategy for distribution networks, integrating coordinated clustering of distributed PV systems and MESS operation to ensure power supply during both pre-disaster prevention and post-disaster restoration phases. In the pre-disaster prevention phase, an improved Louvain algorithm is first applied for PV clustering to improve source-load matching efficiency within each cluster, thereby enhancing intra-cluster power supply security. Subsequently, under the worst-case scenarios of PV output fluctuations, a robust optimization algorithm is utilized to optimize the pre-deployment scheme of MESS. In the post-disaster restoration phase, cluster re-partitioning is performed with the goal of minimizing load shedding to ensure power supply, followed by reoptimizing the scheduling of MESS deployment and its charging/discharging power to maximize the improvement of load power supply security. Simulations on a modified IEEE 123-bus distribution network, which includes two MESS units and twenty-four PV systems, demonstrate that the proposed strategy improved the overall restoration rate from 68.98% to 86.89% and increased the PV utilization rate from 47.05% to 86.25% over the baseline case, confirming its significant effectiveness. Full article

The rapid advancement of energy collection and storage systems (ECSSs) is fundamentally reshaping global energy markets and accelerating the transition toward low-carbon energy systems. This study provides a comprehensive assessment of the economic benefits and systemic effects of advanced ECSS technologies, including photovoltaic-thermal (PV/T) hybrid systems, advanced batteries, hydrogen-based storage, and thermal energy storage (TES). Through a mixed-methods approach combining techno-economic analysis, macroeconomic modeling, and policy review, we evaluate the cost trajectories, performance indicators, and deployment impacts of these technologies across major economies. The paper also introduces a novel economic-mathematical model to quantify the long-term macroeconomic benefits of large-scale ECSS deployment, including GDP growth, job creation, and import substitution effects. Our results indicate significant cost reductions for ECSS by 2050, with battery storage costs projected to fall below USD 50 per kilowatt-hour (kWh) and green hydrogen production reaching as low as USD 1.2 per kilogram. Large-scale ECSS deployment was found to reduce electricity costs by up to 12%, lower fossil fuel imports by up to 25%, and generate substantial GDP growth and job creation, particularly in regions with supportive policy frameworks. Comparative cross-country analysis highlighted regional differences in economic effects, with the European Union, China, and the United States demonstrating the highest economic gains from ECSS adoption. The study also identified key challenges, including high capital costs, material supply risks, and regulatory barriers, emphasizing the need for integrated policies to accelerate ECSS deployment. These findings provide valuable insights for policymakers, industry stakeholders, and researchers aiming to design effective strategies for enhancing energy security, economic resilience, and environmental sustainability through advanced energy storage technologies. Full article

This paper presents an intelligent operational strategy that performs the coordinated dispatch of active and reactive power from PV distributed generators (PV DGs) and Distributed Static Compensators (D-STATCOMs) to support secure and economical operation of active distribution networks. The problem is formulated as a nonlinear optimization problem that explicitly represents the P and Q control capabilities of Distributed Energy Resources (DER), encompassing small-scale generation and compensation units connected at the distribution level, such as PV generators and D-STATCOM devices, adjusting their reference power setpoints to minimize daily operating costs, including energy purchasing and DER maintenance, while satisfying device power limits and the voltage and current constraints of the grid. To solve this problem efficiently, a parallel version of the Population Continuous Genetic Algorithm (CGA) is implemented, enabling simultaneous evaluation of candidate solutions and significantly reducing computational time. The strategy is assessed on the 33- and 69-node benchmark systems under deterministic and uncertainty scenarios derived from real demand and solar-generation profiles from a Colombian region. In all cases, the proposed approach achieved the lowest operating cost, outperforming state-of-the-art metaheuristics such as Particle Swarm Optimization (PSO), Sine Cosine Algorithm (SCA), and Crow Search Algorithm (CSA), while maintaining power limits, voltages and line currents within secure ranges, exhibiting excellent repeatability with standard deviations close to 0.0090%, and reducing execution time by more than 68% compared with its sequential counterpart. The main contributions of this work are: a unified optimization model for joint P–Q control in PV and D–STATCOM units, a robust codification mechanism that ensures stable convergence under variability, and a parallel evolutionary framework that delivers optimal, repeatable, and computationally efficient energy management in distribution networks subject to realistic operating uncertainty. Full article

In this study, the technical, economic, and environmental performances of a Linear Fresnel Reflector (LFR) integrated with an Organic Rankine Cycle (ORC), designed with a non-storage approach, and a monocrystalline photovoltaic (PV) system were comparatively evaluated in meeting a building’s 10 kW electricity demand. Solar-based electricity generation systems play a critical role in reducing carbon emissions and increasing energy self-sufficiency in buildings, yet small-scale, storage-free LFR-ORC applications remain relatively underexplored compared to PV systems. The optimal areas for both systems were determined using the P₁–P₂ methodology. The electricity generation of the LFR-ORC system was calculated based on experimentally measured thermal power output and ORC efficiency, while the production of the PV system was determined using panel area, efficiency, and measured solar irradiation data. System performance was assessed through self-consumption and self-sufficiency ratios, and the economic analysis included life cycle savings (LCS), payback period, and levelized cost of electricity (LCOE). The results indicate that the PV system is more advantageous economically, with an optimal payback of 4.93 years and lower LCOE of 0.053 €/kWh when the economically optimal panel area is considered. On the other hand, the LFR-ORC system exhibits up to 35% lower life-cycle CO₂ emissions compared to grid electricity under grid-connected operation (15.86 tons CO₂-eq for the standalone LFR-ORC system versus 50.57 tons CO₂-eq for PV over 25-year lifetime), thus providing superiority in terms of environmental sustainability. In this context, the study presents an engineering-based approach for the technical, economic, and environmental assessment of small-scale, non-storage solar energy systems in line with the United Nations Sustainable Development Goals (SDG 7: Affordable and Clean Energy and SDG 13: Climate Action) and contributes to the existing literature. Full article