Search Results (32)

Background/Objectives: Homologous recombination deficiency (HRD) is a predictive biomarker in high-grade serous ovarian carcinoma for platinum-based chemotherapy and PARP inhibitors. The implementation of HRD testing in routine diagnostics has generated multiple commercial assays that differ in genomic targets, bioinformatic analysis, and HRD scoring strategies. We aimed to assess the analytical performance and feasibility of a locally semi-automated workflow based on the Agilent SureSelect CD HRR17 panel with SeqOne/SomaHRD analysis, and to compare it with established commercial HRD assays currently used in routine clinical practice: Myriad MyChoice CDx and SOPHiA DDM Dx HRD Solution. Methods: Thirty high-grade serous ovarian carcinoma cases diagnosed between 2019 and 2023 were retrospectively analyzed. HRD status was assessed with the Agilent-SeqOne workflow and compared with Myriad (n = 12) and SOPHiA (n = 18). Concordance and correlation between genomic instability metrics were evaluated. Results: The Agilent/SeqOne workflow showed high concordance with both comparison workflows. Genomic instability metrics strongly correlated across assays (R² up to 0.96). A lower proportion of inconclusive classifications was observed with the Agilent/SeqOne workflow. Discordances were mainly observed in borderline cases near classification thresholds. Variant detection was highly concordant within shared genomic regions. Conclusions: The locally semi-automated HRD workflow demonstrated high analytical concordance with established commercial assays in evaluable cases. Operational advantages related to workflow flexibility and local reanalysis support its potential implementation in routine molecular diagnostics. Full article

This study investigates the role of injection duration in marine diesel engine combustion within an optimised operating framework. While injection parameters are typically analysed in isolation, their interaction within a coupled engine system remains insufficiently understood, particularly under realistic operating conditions. To address this gap, a structured methodology integrating one-dimensional (1D) engine simulation and optimisation is applied to evaluate the sensitivity of injection duration around optimised operating points across multiple engine loads. The approach is based on a calibrated engine model developed in WAVE, coupled with an optimisation framework to determine load-dependent optimal control parameters. Injection duration is then systematically varied around its optimised values to assess its influence on engine performance, emissions, and heat release rate (HRR). This enables the evaluation of the robustness of the optimised solution under realistic deviations. The results demonstrate that injection duration governs the transition between premixed and diffusion-controlled combustion, directly influencing heat release structure, combustion stability, and emissions formation. Longer injection durations promote mixing-limited combustion, leading to reduced peak temperatures and lower nitrogen oxide (NO_x) emissions, but increased incomplete combustion products, including carbon monoxide (CO) and unburned hydrocarbons (HCs), due to reduced oxidation efficiency. These effects are strongly load-dependent, with part-load operation showing higher sensitivity. The study provides a system-level interpretation of injection duration as a control variable rather than an isolated parameter, offering new insight into its role in combustion regime transitions and engine response. The proposed framework enables a more physically consistent understanding of injection control in modern electronically controlled marine diesel engines and supports the development of robust optimisation and calibration strategies. Full article

An advanced, eco-friendly, and fully bio-based flame retardant (FR) system has been created and applied to the cellulose structure of the cotton fabric through a layer-by-layer coating method. This study examines the flame-retardant mechanism of protein-based and phosphorus-containing coatings to improve fire resistance. During combustion, the phosphate groups (−PO₄²⁻) in phosphorus containing flame retardant layers interact with the amino groups (–NH₂) of protein, forming ester bonds, which results in the generation of a crosslinked network between the amino groups and the phosphate groups. This structure greatly enhances the thermal stability of the residual char, hence improving fire resistance. Cone calorimeter and flammability tests show significant improvements in fire safety, including lower peak heat release rates, reduced smoke production, and higher char residue, all contributing to better flame-retardant performance. pHRR, THR, and TSP of the flame-retarded cotton fabric demonstrated 25, 54, and 72% reduction, respectively. These findings suggest that LbL-assembled protein–phosphorus-based coatings provide a promising, sustainable solution for creating efficient flame-retardant materials. Full article

Compression ignition engines are widely recognized for their reliability and efficiency, remaining essential for transportation and power generation despite the transition toward sustainable energy solutions. This study employs ANSYS Forte to analyze the combustion and performance characteristics of a direct-injection, single-cylinder, four-stroke engine fueled with an n-heptane-based diesel surrogate. The investigation considers varying SOI timings (−32.5°, −27.5°, −22.5°, and −17.5° BTDC) and EGR rates (0%, 15%, 30%, 45%, and 60%). The simulation incorporates the RNG k-ε turbulence model, the power-law combustion model, and the KH-RT spray breakup model. The results indicate that the optimal peak pressure and temperature occur at an SOI of −22.5° BTDC with 0% EGR. Advancing SOI enhances oxidation, reducing NOx and CO emissions but increasing UHC due to delayed fuel–air mixing. Higher EGR rates lower in-cylinder pressure, temperature, HRR, and NOx emissions while elevating CO and UHC levels due to oxygen depletion and incomplete combustion. These findings highlight the trade-offs between combustion efficiency and emissions, emphasizing the need for optimized SOI and EGR strategies to achieve balanced engine performance. Full article

Recently, homologous recombination deficiency (HRD) has become a new target for hereditary cancers. Molecular-based approaches for hereditary cancers in the clinical setting have been reviewed. In particular, the efficacy of the PARP inhibitor has been considered by several clinical trials for various kinds of hereditary cancers. This indicates that the PARP inhibitor can be effective for any kind of BRCA mutated cancers, regardless of the organ-specific cancer. Homologous recombination deficiency (HRD) has become a new target for hereditary cancers, indicating the necessity to confirm the status of HRD-related genes. ARID1A, ATM, ATRX, PALB2, BARD1, RAD51C and CHEK2 are known as HRD-related genes for which simultaneous examination as part of panel testing is more suitable. Both surgical and medical oncologists should learn the basis of genetics including HRD. An understanding of the basic mechanism of homologous repair recombination (HRR) in BRCA-related breast cancer is mandatory for all surgical or medical oncologists because PARP inhibitors may be effective for these cancers and a specific strategy of screening for non-cancers exists. The clinical behavior of each gene should be clarified based on a large-scale database in the future, or, in other words, on real-world data. Firstly, HRD-related genes should be examined when the hereditary nature of a cancer is placed in doubt after an examination of the relevant family history. Alternatively, HRD score examination is a solution by which to identify HRD-related genes at the first step. If lifetime risk is estimated at over 20%, an annual breast MRI is necessary for high-risk screening. However, there are limited data to show its benefit compared with BRCA. Therefore, a large-scale database, including clinical information and a long-term follow-up should be established, after which a periodical assessment is mandatory. The clinical behavior of each gene should be clarified based on a large-scale database, or, in other words, real-world data. Full article

Increasing the flame retardancy of lignocellulosic materials such as Miscanthus × giganteus can effectively enable their wide use. This study examines the fireproofing process of Miscanthus particles using an eco-friendly process by grafting phytic acid and urea in aqueous solution. Miscanthus particles underwent a steam explosion step before being grafted. Fireproof binderless particle panels were manufactured from miscanthus particles with or without adding olive pomace by hot-pressing. The effect of the steam explosion and/or the flame-retardant treatment on the morphology, chemical composition and thermal stability of the particles, as well as the thermal stability of the panels, was investigated. The results showed that water impregnation followed by a steam explosion at 210 °C for 8 min resulted in particles that were rich in lignin and more homogeneous in size (length and width). Fireproof particles were produced with relatively low P and N contents. The flame retardancy of the binderless particle panels was significantly improved when using miscanthus particles treated with phytic acid and urea, as shown by a reduced heat release (HRR) and an increased time-to-ignition. However, the presence of olive pomace significantly decreased the flame retardancy of the panels. Binderless particle panels prepared from grafted miscanthus particles showed the best fire properties and are considered fireproof. Full article

In this study, vanadium (3.5⁺) electrolyte was prepared for vanadium redox flow batteries (VRFBs) through a reduction reaction using a batch-type hydrothermal reactor, differing from conventional production methods that utilize VOSO₄ and V₂O_5. The starting material, V₂O₅, was mixed with various concentrations (0.8 M, 1.2 M, 1.6 M, 2.0 M) of citric acid (CA) as the reducing agent and stirred for 60 min at 90 °C using a hot plate to ensure complete dispersion in the solution. The resulting solution was subsequently subjected to a hydrothermal reduction reaction (HRR) furnace at 150 °C for 24 h to generate vanadium (3.5⁺). The mixed states of the produced vanadium (3⁺) and vanadium (4⁺) were confirmed using UV-vis spectroscopy. The electrochemical properties of the electrolyte were investigated through cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS), revealing that the optimal concentration of the CA was 1.6 M. The current efficiency, energy efficiency, and voltage efficiency of the electrolyte produced via the HRR process was compared with that prepared using VOSO₄ in charge and discharge experiments. The results demonstrate that the HRR process yields an enhanced electrolyte across all efficiency metrics produced through the given improved performance in all efficiencies. These findings indicate that the HRR process using citric acid can facilitate the straightforward preparation of vanadium (3.5⁺) electrolyte, making it suitable for large-scale production. Full article

The flammability of epoxy resins and knowing how to achieve curing are particularly important factors during use. A novel approach for enhancing the fire resistance and reducing the smoke emission of epoxy resin during the curing process is suggested, which involves the utilization of a three-source integrated polymerization intumescent flame-retardant. In this study, the synthesis of poly 4,4-diaminodiphenylsulfone spirocyclic pentaerythritol bisphosphonate (PCS) is achieved through using solution polymerization, utilizing 4,4′-diaminodiphenylsulfone (DDS) and spirocyclic pentaerythritol bisphosphorate disphosphoryl chloride (SPDPC) as initial components. Following that, the EP underwent the inclusion of PCS to examine its resistance to heat, its ability to prevent flames, its effectiveness in reducing smoke and its curing effect. Compared to the unmodified epoxy resin, the addition of PCS can not only cure the epoxy resin, but also decompose before the epoxy resin and has a good carbonization effect. With the addition of 7 wt.% PCS, the LOI value can achieve 31.2% and successfully pass the UL-94 test with a V-0 rating. Moreover, the cone calorimeter experiment demonstrated a noteworthy decline of 59.7% in the maximum heat release rate (pHRR), 63.7% in overall heat release (THR), and 42.3% in total smoke generation (TSP). Based on the examination of TG-FTIR and SEM findings, there is ample evidence to suggest that PCS, functioning as a phosphorus-nitrogen intumescent flame-retardant that combines three origins, has the potential to exhibit a favorable flame-retardant impact in both its gas and condensed phases. Full article

The increased demand for cladding in high-rise buildings has prompted engineers to explore alternative products utilizing recycled materials. However, ensuring fire compliance in these alternative claddings, which are predominantly composed of low-volume polymer-based composites, poses a critical challenge. Traditional experimental methods for fire evaluation are costly, time consuming, and environmentally impactful. Considering this, a numerical approach was proposed for evaluating the fire performance of glass-polymer composite materials, which contain a high proportion of recycled glass and a lower percentage of rigid polyurethane. A cone calorimeter test was simulated using Computational Fluid Dynamics (CFD) software to investigate the flammability of the novel glass–polymer composite material. This validated numerical model was employed to assess the combustibility of the glass–polyurethane composite materials and identify influential parameters using the Design of Experiments (DoE) method. Statistical analysis revealed that three material properties, namely, the heat of combustion, the absorption coefficient, and the heat of reaction, significantly influenced the peak heat release rate (pHRR) of the glass–polyurethane composite materials compared to other properties. Based on these findings, an empirical equation was proposed that demonstrates a reasonable correlation with the pHRR of low-polymer recycled glass composite materials. The outcomes of this study hold considerable importance for understanding and predicting the combustibility behaviour of low-polymer–glass composites. By providing a validated numerical model and identifying critical material properties, this research contributes to the development of sustainable fire safety solutions for buildings, enabling the use of recycled materials and reducing reliance on conventional claddings. Full article

In miniaturized and integrated electronic devices, thermal potential and fire hazards caused by heat diffusion require an efficient thermal management system with versatile electronic packaging equipment. The flame retardancy was endowed on the surface of carbon nitride after thermal etching (CNNS) containing piperazine pyrophosphate (PPAP) by hydrogen bonding, and the obtained nanosheet was defined as PPAP-CNNS. During solution blending and program-controlled curing, PPAP-CNNS was used as a multifunctional filler to fabricate highly thermoconductive and fire retardant epoxy resin (EP) composites. In line with expectations, the resultant EP composites containing 7 wt% PPAP-CNNS had an exceptional thermal conductivity (TC) of 1.1 W·m⁻¹K⁻¹, which was 4.8 times higher than pure EP. Simultaneously, there was a sharp drop in the heat release rate (HRR), total heat release (THR), smoke production rate (SPR), and total smoke production (TSP) compared to pure EP. These reductions were, respectively, 63.7%, 54.2%, 17.9%, and 57.2%. The addition of PPAP-CNNS increased the specific surface area, which increased the heat conduction routes, and also the shape of the compact and solid char layer during burning, protecting the underlying polymer. These improvements to dispersion and surface functionalization were made possible by the compound. These results indicate that the preparation of integrated multi-functional resin described in this study has a wide application. Full article

Fire-retardant (FR) treated wood-based panels, used commonly in furniture and construction, need to meet stringent fire safety regulations. This study presents a novel treatment for imparting fire resistance to wood composites by applying separate solutions of phytic acid and sodium silicate onto wood particles before the hot pressing at 160 °C. A scanning electron microscopy-energy dispersive X-ray spectroscopy (SEM-EDX) analysis revealed that phytic acid and sodium silicate were uniformly distributed throughout the wood particles, and the formation of silica gel resulted in the aggregation of elemental silicon. Fourier-transform infrared spectroscopy (FTIR) displayed that phytic acid caused the thermal degradation of hemicelluloses, which led to a brownish outer appearance of the FR-treated composites. Fire performance was assessed using both limiting oxygen index (LOI) and a cone calorimeter. These techniques showed a higher LOI value and a significant reduction in heat-release rate (HRR), total heat release (THR), smoke-production rate (SPR), and total smoke production (TSP). In addition, cone calorimeter and thermogravimetric (TGA) analyses consistently showed increased char residue in treated wood composites. Moreover, internal bond strength (IB) and modulus of elasticity (MOE) of the wood composite were not significantly changed compared with those of the untreated composite. Surprisingly, in the FR-treated composite, the 24 h-thickness swelling, and the water uptake were slightly decreased. Consequently, this new treatment has the potential to increase the fire retardancy of wood composites, such as particleboard, without deteriorating the key mechanical properties. Full article

In this study, fire-retardant plywood was fabricated using a simple guanidine phosphate (GP) impregnation treatment of the veneers, and the influence of the treatment on the flame resistance and bonding strength of the plywood was fully investigated. The results showed that GP modification could effectively endow the plywood with excellent fire resistance and smoke-suppression effect. When 10% GP solution was applied, the limiting oxygen index (LOI) of the impregnated wood was up to 37%, which was almost twice of unmodified plywood. The heat-release rate (HRR) and total smoke production (TSP) were also greatly decreased from the pristine 94.14 MJ/m² and 0.77 m² to that of modified 43.94 MJ/m² and 0.08 m², respectively. The excellent fireproof performance was mainly due to the thermal decomposition of GP to phosphoric acid and guanidine during combustion, which could promote the catalytic carbonization of wood and release of incombustible CO₂ and NH₃ to dilute and decrease the combustible gases, thus collectively preventing the wood form burning. However, the guanidine phosphate modification could seriously damage the bond performance of plywood, especially the UF resin adhesive-bonded plywood. When 10% guanidine phosphate was applied, the dry and wet bonding strength of the UF resin adhesive-bonded plywood were decreased to only 0.7 MPa and 0.12 MPa, respectively, which may be due to the blocking effect of GP in wood pores and the hygroscopic and soluble properties of GP itself in water, thus decreasing the effective bonding between wood veneers. What’s worse, the poor water resistance of the UF resin adhesive was also adverse to the bonding strength of plywood. Surprisingly, the PF resin adhesive was proved to be suitable for gluing the GP-modified wood without obviously decreasing the bonding strength, which could be used to prepare plywood with both high bonding strength and flame resistance. Full article

In this study, the two eco-friendly flame retardants of the polymeric type (PA-PEI) and monomeric type (PA-Arg) phytate amine complexes were prepared via the ionic reaction of polyethylenimine (PEI) or arginine (Arg), respectively, with phytic acid in an aqueous solution. The chemical structure and thermal stability of PA-PEI and PA-Arg were characterized by Fourier-transform infrared spectroscopy (FTIR) and thermogravimetric analysis (TGA). In order to improve the flame retardancy of the polylactic acid (PLA)/polybutylene succinate (PBS) biocomposites (P/15B-based biocomposites), the flame retardants PA-PEI and PA-Arg were embedded into P/15B by thermal blending procedures, respectively, to obtain P/15B/PA-PEI series and P/15B/PA-Arg series biocomposites. The TGA analyses demonstrated that incorporating PA-PEI or PA-Arg into the P/15B polymer enhances the char residues in these P/15B biocomposites. The XRD and SEM analyses of the P/15B/PA-PEI series and P/15B/PA-Arg series suggested the PA-PEI and PA-Arg were embedded into the P/15B polymer matrixes, respectively. The mechanical results showed that P/15B/PA-Arg series exhibited higher values than the P/15B/PA-PEI series biocomposite, which were associated with less roughness of P/15B/PA-Arg than that of the P/15B/PA-PEI series. The flammability results of the P/15B/PA-PEI series and P/15B/PA-Arg series biocomposites exhibited a V-2 level in UL94 vertical test. Further, the fire resistance performance of P/15B-based biocomposites was enhanced by incorporating PA-PEI or PA-Arg into the P/15B matrix through the analyses of the Cone calorimeter test (CCT), as a comparison with neat P/15B. The peak heat release rate (pHRR), the total heat release rate (THR), and char residues of P/15B/15PA-Arg biocomposite were significantly improved to 280.26 kW/m², 107.89 MJ/m², and 10.4%, respectively. The enhancement of the P/15B-based composites’ fire resistance is attributed to the interplay effect on the catalytic and condensed effect on the thermal decomposition of PA-PEI or PA-Arg in P/15B biocomposites. The resultant eco-friendly flame-retardant P/15B biocomposites reported in this study can be widely applied in various fields, including construction, electronic appliances, and other fields. Full article

The building and construction industry consumes a significant amount of virgin resources and minimizing the demand with alternative waste materials can provide a contemporary solution. In this study, thermal components of kraft fibres (KFs) derived from waste cardboard are investigated. The mechanical properties containing KFs within concrete composites are evaluated. Metakaolin (MK) and KFs were integrated into concrete samples as a partial substitute for cement. Silica Fume (SF) was applied to the KF (SFKFs) with a view to enhancing the fibre durability. The results indicated that there was a reduction in compressive strength of 44 and 56% when 10% raw and modified KFs were integrated, respectively. Raw, fibre and matrix-modified samples demonstrated a 35, 4 and 24% flexural strength reduction, respectively; however, the tensile strength improved by 8% when the matrix was modified using MK and SFKF. The morphology of the fibres was illustrated using a scanning electron microscope (SEM), with an energy dispersion X-ray spectroscopy (EDS) provision and Fourier transform infrared spectroscopy (FT-IR) employed to gain insights into their chemical nature. The thermal, calorimetric and combustion attributes of the fibres were measured using thermogravimetric analysis (TGA), differential scanning calorimetry (DSC) and pyrolysis combustion flow calorimetry (PCFC). SFKFs showed a lower heat release capacity (HRC), demonstrating a lower combustion propensity compared to raw KFs. Furthermore, the 45% decreased peak heat release rate (pHRR) of SFKFs highlighted the overall reduction in the fire hazards associated with these materials. TGA results also confirmed a lower mass weight loss of SFKFs at elevated temperatures, thus corroborating the results from the PCFC runs. Full article

Many studies have shown that the linear elastic fracture mechanics (LEFM) method based on the stress intensity factor range (ΔK) has limitations that cannot be ignored. Due to neglecting the influence of plastic deformation near the crack tip, LEFM shows apparent deviations in evaluating the fracture behaviour. Therefore, in this study, the crack tip opening displacement range (ΔCTOD) is chosen as an alternative to ΔK and based on the elastic–plastic fracture mechanics (EPFM) to develop a new fracture behaviour assessment approach for marine structures. Firstly, a ΔCTOD model based on the HRR (Hutchinson, Rice, and Rosengren) solution is proposed considering the crack closure effect. Secondly, a series of compact tension (CT) specimen crack growth experiments under constant amplitude loading is carried out. According to the experimental results, the prediction accuracy of the HRR model and traditional Irwin and Dugdale models is compared and analysed. The rationality of ΔCTOD as an alternative to ΔK is verified. The results show that ΔCTOD can describe the crack propagation behaviour well. The proposed HRR model shows better accuracy and a more comprehensive application range than the traditional models, which has a guiding significance for studying fracture behaviour for marine structural applications. Full article