Search Results (145)

Energy management strategies (EMSs) play a critical role in improving both the efficiency and durability of fuel cell electric vehicles (FCEVs). To overcome the limited adaptability and insufficient durability consideration of existing deep reinforcement learning-based EMSs, this study develops a degradation-aware energy management strategy based on the Soft Actor–Critic (SAC) algorithm. By leveraging SAC’s maximum-entropy framework, the proposed method enhances exploration efficiency and avoids premature convergence to operating patterns that are unfavorable to fuel cell durability. A reward function explicitly penalizing hydrogen consumption, power fluctuation, and degradation-related operating behaviors is designed, and the influences of reward weighting and key hyperparameters on learning stability and performance are systematically analyzed. The proposed SAC-based EMS is evaluated against Deep Q-Network (DQN) and Proximal Policy Optimization (PPO) strategies under both training and unseen driving cycles. Simulation results demonstrate that SAC achieves a superior and robust trade-off between hydrogen economy and degradation mitigation, maintaining improved adaptability and durability under varying operating conditions. These findings indicate that integrating degradation awareness with entropy-regularized reinforcement learning provides an effective framework for practical EMS design in FCEVs. Full article

To identify the emission reduction potential and policy synergies of Tokyo’s road passenger and urban road freight transport under the “carbon neutrality target,” this paper constructs an assessment framework for megacities. First, based on macroeconomic socioeconomic variables (population, GDP, road length, and employment), regression equations are used to predict traffic turnover for different modes of transport from 2021 to 2050. Then, the prediction results are imported into the LEAP (Long-range Energy Alternatives Planning) model. By adjusting three policy levers—vehicle technology substitution (ZEV: EV/FCEV), energy intensity improvement, and upstream electricity and hydrogen supply decarbonization—a “single-factor vs. multi-factor (policy synergy)” scenario matrix is designed for comparison. The results show that the emission reduction potential of a single measure is limited; upstream decarbonization yields the greatest independent emission reduction effect, while the emission reduction effect of deploying zero-emission vehicles and improving energy efficiency alone is small. In the most ambitious composite scenario, emissions will decrease by approximately 83% by 2050 compared to the baseline scenario, with cumulative emissions decreasing by over 35%. Emissions from rail and taxis will approach zero, while buses and freight will remain the primary residual sources. This indicates that achieving net zero emissions in the transportation sector requires not only accelerated ZEV penetration but also the simultaneous decarbonization of electricity and hydrogen, as well as policy timing design oriented towards fleet replacement cycles. The integrated modeling and scenario analysis presented in this paper provide quantifiable evidence for the formulation of a medium- to long-term emissions reduction roadmap and the optimization of policy mix in Tokyo’s transportation sector. Full article

Nowadays, the automotive industry is primarily driven by the CO₂ policy that targets net zero carbon emissions by 2035 from passenger cars and commercial vehicles. The main path to achieve this goal is the implementation of electric powertrains with the energy stored in batteries, as the case for battery electric vehicles (BEV). However, this technology still faces some difficulties in terms of energy density, overall weight, charging time, and vehicle autonomy. From the other point of view, fuel cell electric vehicles (FCEV) offer the same advantages as BEV in terms of CO₂ reduction, providing better autonomy and lower refueling time. The energy demand by the electric powertrain strongly depends on the vehicle driving conditions as it directly affects energy consumption. In that context, the article aims to study the electrical energy demand of an ultra-energy efficient vehicle intended for a Shell eco-marathon competition in order to minimize hydrogen consumption. The study was carried out over a single lap on the racing track in Nogaro, France while applying the race rules from the competition in 2023. It includes a numerical evaluation of the vehicle resistance forces in different driving strategies and experimental validation on the propulsion test bench. Full article

This study investigates whether Battery Electric Vehicles (BEVs) or Fuel Cell Electric Vehicles (FCEVs) represent the superior alternative to conventional vehicles for last-mile delivery, with a particular focus on large enterprises that prioritize both economic feasibility and environmental performance. Life Cycle Assessment and Life Cycle Cost methodologies are applied to evaluate both technologies across the full cradle-to-grave life cycle within a unified framework. The functional unit is defined as one kilometer traveled by a BEV or FCEV in last-mile transportation, and the system boundary includes vehicle manufacturing, operation, maintenance, and end-of-life treatment. The environmental impacts are assessed using the ReCiPe 2016 Midpoint (H) method implemented in OpenLCA 2.0.4, and normalization follows the standards provided by the official ReCiPe 2016 framework. The East China Power Grid serves as the baseline electricity mix for the operational stage. Regarding GHG emissions, FCEVs demonstrate a 12.36% reduction in carbon dioxide (CO₂) emissions compared to BEVs. This reduction is particularly significant during the operational phase, where FCEVs can lower CO₂ emissions by 53.51% per vehicle relative to BEVs, largely due to hydrogen energy’s higher efficiency and durability. In terms of economic costs, BEVs hold a slight advantage over FCEVs, costing approximately 0.8 RMB/km/car less. However, during the manufacturing phase, FCEVs present greater environmental challenges. It is recommended that companies fully consider which environmental issues they wish to make a greater contribution to when selecting vehicle types. This study provides insight and implications for large companies with financial viability concerns about environmental impact regarding selecting the two types of vehicles for last-mile transportation. The conclusions offer guidance for companies assessing which vehicle technology better aligns with their long-term operational and sustainability priorities. It can also help relevant practitioners and researchers to develop solutions to last-mile transportation from the perspective of different enterprise sizes. Full article

This study aims to provide a comprehensive and realistic evaluation of consumer and external costs associated with commercially available passenger cars. The central research question is: How do Total Cost of Ownership (TCO) and external costs differ between conventional vehicles, Battery Electric Vehicles (BEVs), and Fuel Cell Electric Vehicles (FCEVs) across various vehicle segments? The methodological approach includes the selection of 55 commonly registered vehicle variants in Germany and the calculation of TCO and external costs over a 16-year vehicle lifetime. TCO components include purchase price, governmental subsidies, remaining value, fuel or energy expenses, maintenance, insurance and taxes. External costs incorporate emissions, land use and the societal costs from purchase bonuses. Apart from the large quantity of considered vehicles and the depth of investigation, this study’s main contribution is the consideration of tax revenue as a negative external cost. The results show that BEVs consistently exhibit the lowest TCO and external cost across all segments. For example, a BEV in the E segment has 26% lower TCO and 14,300 € lower external cost than an equivalent diesel vehicle. FCEVs show competitive results in both TCO and external costs, though limited by market availability. While higher in TCO, vehicles in higher segments generally lead to lower external cost due to higher tax revenue. The findings support the economic and ecological advantages of BEVs, which should therefore be primarily considered by consumers and policy-makers. Full article

Heavy-duty trucking is central to the U.S. economy, and improving its long-term sustainability requires cost-effective, energy-efficient, and reliable operations. Emerging technologies—advanced powertrains, batteries, and alternative fuels—offer potential solutions, but their economic and operational viability remains uncertain. This study evaluates the performance of Class 8 battery electric (BEV), plug-in hybrid (PHEV), fuel cell electric (FCEV), and diesel trucks in terms of energy use and the levelized cost of driving (LCOD) to determine when these technologies become competitive without compromising operational reliability. The analysis explores how evolving fuel prices and vehicle technology improvements in 2023, 2035, and 2050 influence the cost competitiveness of each powertrain. By comparing the results at both the technology level and the fleet level, the study demonstrates that powertrains that appear cost-effective on individual routes may not always scale to fleet-wide viability, and vice versa. The analysis is based on real-world data from over 15,700 Class 8 truck trips recorded in California in 2022, capturing diverse driving scenarios, payload conditions, and operational constraints. The results show that BEV250 can deliver cost-effective performance in short-haul operations (0–250 miles) under depot electricity prices below USD 0.34/kWh and maintain this advantage through 2050 as battery costs decline. In the 250–500-mile segment, the technology-level analysis indicates that BEV500 often achieves the lowest LCOD on individual tours, particularly under low electricity prices, while the fleet-level results show that FCEVs provide a more consistent cost performance across all tours, especially when the route variability is high. For long-haul operations (>500 miles), where BEVs are assumed to operate without en-route charging, FCEVs emerge as the most cost-effective non-diesel option by 2050, provided hydrogen prices fall below USD 6/kg. PHEVs show a limited long-term competitiveness and are mainly viable under transitional fuel price conditions. Overall, the findings underscore that there is no one-size-fits-all solution. Powertrain adoption must be range-aware, infrastructure-sensitive, and fleet-structured. By integrating technology-level and fleet-level perspectives, this study provides actionable insights for fleet operators, policymakers, and industry stakeholders seeking to balance cost, reliability, and sustainability in heavy-duty freight. Full article

The study analyzed the energy flow of a second-generation Toyota Mirai FCEV under Real Driving Conditions (RDC) in ECO and Normal driving modes. The results demonstrated significant operational differences between the two modes. The ECO mode reduced the maximum motor torque from 286.5 Nm to 187.6 Nm (−51%) but increased the high-voltage (HV) battery State of Charge swing (ΔSOC = 17.26% vs. 10.59%, +63%). Regenerative energy recovery rose by ~19.8% overall and by 25.7% in urban driving. The ECO mode exhibited higher HV battery cycling (4.03 Wh vs. 3.27 Wh) and slightly higher fuel cell energy use in urban conditions (+8.5%). The average fuel cell power was 36% higher in Normal mode, whereas the HV battery output was 11.4% higher in ECO mode. Hydrogen consumption in Normal mode was two times higher in urban and highway phases and three times higher in rural driving compared to ECO mode. In summary, the ECO mode enhances regenerative energy utilization and reduces total onboard energy consumption, at the expense of peak torque and increased battery cycling. These results provide valuable insights for optimizing energy management strategies in fuel cell electric powertrains under real driving conditions. The study introduces an independent methodology for high-resolution (1 Hz) electric energy-flow monitoring and quantification of energy exchange between the fuel cell, high-voltage battery, and powertrain system under Real Driving Conditions (RDC). Unlike manufacturer-derived data or laboratory simulations, the presented approach enables empirical validation of on-board energy management strategies in production FCEVs. The results reveal distinctive energy-flow patterns in ECO and Normal modes, offering reference data for the optimization of future hybrid control algorithms in hydrogen-powered vehicles. Full article

The controller of the energy management system must be capable of meeting the rapid and dynamic demands of fuel cell electric vehicles (FCEVs) without compromising its performance and durability. The performance of FCEVs can be enhanced through powertrain hybridization with battery and ultracapacitor systems. The overall dynamic optimization of the energy between the batteries/ultracapacitors and the Proton Exchange Membrane Fuel Cell (PEMFC) output can play an important role in hydrogen fuel economy and the durability of vehicle systems. The present study investigates the system’s efficiency and fuel consumption in European Drive Cycles when employing diverse energy management strategies. This investigation utilizes a novel switch real-time strategy (SWA_RTO), which is founded on an A-factor algorithm that alternates between the most effective Real Time Optimization (RTO) strategies. The objective of this paper is to underscore the significance of algorithmic optimization by presenting the optimal results obtained for the fuel economy of the SWA_RTO strategy. These results are compared with the basic RTO strategy and the static Feed-Forward (sFF) reference strategy. The load demand during driving cycles is primarily determined by the PEMFC system. Minor discrepancies in power balance are addressed by the hybrid battery and ultracapacitor system. Consequently, the lifespan of the subject will increase, and the state of charge (SOC) will no longer be a factor in monitoring. Full article

Electromobility is a key element of efforts to reduce transport emissions at points where transport tasks are carried out (e.g., along roads, in urban areas). At the same time, the implementation of electromobility, as a whole, encompasses the movement of people and cargo using electric vehicles (EVs), is strongly dependent on the deployment of EV charging points, which are part of the alternative fuel infrastructure. At the current stage of electromobility development, the process of deploying alternative fuel infrastructure along the TEN-T (Trans-European transport network) is underway, a process mandated by the AFIR (Regulation for the Deployment of Alternative Fuels Infrastructure). The AFIR regulation assumes the construction of infrastructure adapted to serve low- and zero-emission vehicles along the TEN-T network. The elements of the infrastructure under construction include a recharging pool, a recharging station, a recharging point for electric vehicles (EVs), and hydrogen refueling stations for fuel cell electric vehicles (FCEVs). It should be noted that infrastructure elements must be adapted to support light-duty electric vehicles (eLDVs) and heavy-duty electric vehicles (eHDVs). This approach expands the possibilities of using electric vehicles in passenger and freight transport within the TEN-T network. The aim of this article is to estimate the impact of electric vehicle charging points on electromobility in a selected area. During the research phase, spatial interpolation of electric vehicle charging points was conducted using GIS tools. The spatial interpolation of electric vehicle charging points presented in the article represents an innovative approach at the stage of analysis and development of alternative fuel infrastructure along the TEN-T network. Full article

Fuel cell electric vehicles (FCEVs) rely on a battery system to manage transient load demands and to recover braking energy. In recent years, hybrid topologies that also integrate supercapacitors have gained considerable attention, since they can improve system efficiency, driving dynamics, and component lifetime. Supercapacitors, thanks to their much higher power density compared to conventional batteries, are particularly promising for adoption in FCEVs. Most studies in the literature, however, evaluate these architectures under standardized homologation driving cycles. While such cycles provide a common benchmark for comparison, they generally exhibit less energy-intensive profiles and therefore do not fully capture the real operating demands of a vehicle. For this reason, the present work investigates the use of batteries and supercapacitors in FCEVs under an actual urban driving mission, where the route includes an experimentally measured altitude profile. This approach allows for a more realistic assessment of energy requirements. Furthermore, the analysis carried out in this study considers different powertrain configurations: the exclusive use of a battery, the sole use of a supercapacitor, and a hybrid combination of both systems. These scenarios are evaluated both for an FCEV that can only be refueled with hydrogen and for a plug-in hybrid version of the vehicle that can also recharge its battery from an external charging station. Full article

With growing global demand for sustainable decarbonization, hydrogen energy systems have emerged as a key pillar in achieving carbon neutrality. This study assesses the greenhouse gas (GHG) reduction efficiency of Republic of Korea’s hydrogen ecosystem from a life-cycle perspective, focusing on production and utilization stages. Using empirical data—including the national hydrogen supply structure, fuel cell electric vehicle (FCEV) deployment, and hydrogen power generation records, the analysis compares hydrogen-based systems with conventional fossil fuel systems. Results show that current hydrogen production methods, mainly by-product and reforming-based hydrogen, emit an average of 6.31 kg CO₂-eq per kg H₂, providing modest GHG benefits over low-carbon fossil fuels but enabling up to a 77% reduction when replacing high-emission sources like anthracite. In the utilization phase, grey hydrogen-fueled stationary fuel cells emit more GHGs than the national grid. By contrast, FCEVs demonstrate a 58.2% GHG reduction compared to internal combustion vehicles, with regional variability. Importantly, this study omits the distribution phase (storage and transport) due to data heterogeneity and a lack of reliable datasets, which limits the comprehensiveness of the LCA. Future research should incorporate sensitivity or scenario-based analyses such as comparisons between pipeline transport and liquefied hydrogen transport to better capture distribution-phase impacts. The study concludes that the environmental benefit of hydrogen systems is highly dependent on production pathways, end-use sectors, and regional conditions. Strategic deployment of green hydrogen, regional optimization, and the explicit integration of distribution and storage in future assessments are essential to enhancing hydrogen’s contribution to national carbon neutrality goals. Full article

This review analyzes how recent electric-vehicle LCAs have been carried out, emphasizing goals and scope, functional units, system boundaries (cradle-to-grave and well-to-wheel), and attributional versus consequential modeling rather than reporting outcomes. Using a systematic search of studies mainly from 2018–2025, it maps common tools and data sources (Ecoinvent, GREET, GaBi, and regional inventories) and summarizes LCIA practices, underscoring the need to report versions, regionalization, and assumptions transparently for comparability. Uncertainty studies are uneven: sensitivity and scenario analyses are common, while probabilistic approaches (e.g., Monte Carlo) are less used, indicating room for more consistent, multi-parameter uncertainty analysis. The results show that outcomes are context-dependent: BEVs deliver the largest life-cycle GHG cuts on low-carbon grids with improved battery production and end-of-life management; PHEVs and HEVs act as transitional options shaped by real-world use; and FCEV benefits depend on low-carbon hydrogen. Vehicle-integrated photovoltaics and solar-powered vehicles are promising yet under-studied, with performance tied to local irradiance, design, and grid evolution. Future research suggests harmonized reporting, more regionalized and time-aware modeling, broader probabilistic uncertainty, and comprehensive LCAs of VIPV/SPV and circular pathways to support policy-ready, comparable results. Full article

The paper studies and analyzes electric vehicle engines powered by hydrogen under the WLTP standard driving protocol. The driving range extension is estimated using a specific protocol developed for FCEV compared with the standard value for battery electric vehicles. The driving range is extended by 10 km, averaging over the four protocols, with a maximum of 11.6 km for the FTP-75 and a minimum of 7.7 km for the WLTP. This driving range extension represents a 1.8% driving range improvement, on average. Applying the FCEV current weight, the driving range is extended to 18.9 km and 20.4 km, on average, when using power source energy capacity standards for BEVs and FCEVs. Full article

This paper analyzes the potential of hydrogen technologies in transport, placing it within the context of global environmental and energy challenges. Its primary purpose is to evaluate the prospects for the implementation of these technologies at international and national levels, including Poland. This study utilizes a literature review and an analysis of the results of a highly limited, exploratory pilot survey measuring public perception of hydrogen technology in transport. It is critical to note that the survey was conducted on a small, non-representative sample and exhibited a strong geographical bias, primarily collecting responses from Europe (50 people) and North America (30 people). This study also details hydrogen vehicle types (FCEV, HICE) and the essential infrastructure required (HRS). Despite solid technological foundations, the development of hydrogen technology heavily relies on non-technical factors, such as infrastructure development, support policy, and social acceptance. Globally, the number of vehicles and stations is growing but remains limited, with the pace of development correlating with the involvement of countries. The pilot survey revealed a generally positive perception of the technology (mainly due to environmental benefits) but highlighted three key barriers: limited availability of refueling infrastructure—51.5% of respondents strongly agreed on this obstacle, high purchase and maintenance costs, and insufficient public awareness. Infrastructure subsidies and tax breaks were identified as effective incentives. Hydrogen technology offers a potentially competitive and sustainable transport solution, but it demands significant systemic support, intensive investment in large-scale infrastructure expansion, and comprehensive educational activities. Further governmental engagement is crucial. The severe limitations resulting from the pilot nature of the survey should be rigorously taken into account during interpretation. Full article

The integration of electric vehicles (EVs) and fuel-cell electric vehicles (FCEVs) requires accessible and profitable facilities for fast charging. To promote fast-charging stations (FCSs), a systematic analysis that encompasses both planning and operation is required, including the incorporation of multi-energy resources and uncertainty. This paper presents an optimization framework that addresses a joint strategy for the configuration and operation of an EV/FCEV fast-charging station (FCS) integrated with distributed energy resources (DERs) and hydrogen systems. The framework incorporates uncertainties related to solar photovoltaic (PV) generation and demand for EVs/FCEVs. The proposed joint strategy comprises a four-phase decision-making framework. Phase 1 involves modeling EV/FECE demand, while Phase 2 focuses on determining an optimal long-term infrastructure configuration. Subsequently, in Phase 3, the operator optimizes daily power scheduling to maximize profit. A real-time uncertainty update is then executed in Phase 4 upon the realization of uncertainty. The proposed optimization framework, formulated as mixed-integer quadratic programming (MIQP), considers configuration investment, operational, maintenance, and penalty costs for excessive grid power usage. A heuristic algorithm is proposed to solve this problem. It yields good results with significantly less computational complexity. A case study shows that under the most adverse conditions, the proposed joint strategy increases the FCS owner’s profit by 3.32% compared with the deterministic benchmark. Full article