Search Results (20,560)

Larix olgensis, a keystone timber species in Northeast China, is increasingly threatened by Neofusicoccum laricinum-induced shoot blight, a devastating disease that compromises forest health and necessitates sustainable management strategies. Here, we demonstrate that the endophytic bacterium Bacillus amyloliquefaciens JL54 elicits multifaceted defense responses in L. olgensis, enhancing resistance to pathogen infection. Greenhouse assays revealed that JL54 pretreatment reduced disease incidence by 12.5% and achieved 43.75% control efficacy while maintaining host vigor. Histochemical analyses identified JL54-induced rapid hydrogen peroxide (H₂O₂) accumulation, extensive lignin deposition, and localized programmed cell death (PCD), indicative of a primed immune response. Transcriptomic analyses uncovered distinct temporal defense patterns: early-stage responses (0 h post-inoculation) were characterized by upregulation of cutin, suberin, and wax biosynthesis pathways, reinforcing physical barriers, whereas late-stage responses (12 h post-inoculation) were dominated by ribosome- and proteostasis-related pathways (e.g., heat shock proteins [HSPs], glutathione S-transferases [GSTs]) to mitigate cellular damage. Biochemical assays corroborated these findings, with JL54 colonization reducing membrane lipid peroxidation (27.2% decrease in malondialdehyde content) and significantly elevating the activity of key defense enzymes, including peroxidase (POD), phenylalanine ammonia-lyase (PAL), and GST. Phytohormone profiling implicated jasmonic acid (JA) as the central mediator of induced systemic resistance (ISR), with JL54-potentiated JA signaling preceding pathogen containment. Collectively, these results demonstrate that JL54 contributes to a coordinated defense strategy in L. olgensis, integrating structural reinforcement (cuticle/lignin), oxidative stress management, and JA-mediated immune priming. These insights advance the understanding of endophyte-conferred resistance in conifers and highlight JL54’s potential as a biocontrol agent for sustainable forestry. Full article

This paper presents two complementary classes of analytical benchmark problems for the one-dimensional wave equation governing longitudinal vibration of a prismatic rod with mixed (clamped–free) boundary conditions. The first benchmark class consists of classical initial-value problems and includes both compatible and incompatible initial data at the space–time corners, highlighting their influence on convergence, regularity, and termwise differentiation of displacement, velocity, and axial force series representations. The second benchmark class prescribes the displacement at two time instants (initial and final time), leading to a fundamentally different modal structure and revealing spectral conditioning effects governed by the ratio $L/\left(c{t}_e\right)$. The derived closed-form solutions provide reference configurations for verification of transient numerical solvers, particularly in scenarios where classical smooth compatibility assumptions are not satisfied. Full article

Pyrolysis of refuse-derived fuel (RDF) is a promising waste-to-energy route, but its use in higher-value applications remains limited by tar carryover, benzene, toluene, ethylbenzene, and xylenes (BTEX), heteroatom-containing compounds, and pollutant accumulation in recirculated scrubber water. This study evaluated operating windows for RDF pyrolysis coupled with direct wet scrubbing and closed-loop water reuse, with the aim of identifying regimes suitable for different end-use tiers. A Taguchi L27 design of experiments (DOE), i.e., an orthogonal array comprising 27 experimental runs, was applied to evaluate the effects of pyrolysis temperature, residence time, scrubber liquid-to-gas ratio, and scrubber-water temperature, while sequential reuse of the same scrubber-water inventory was evaluated at 5, 10, and 15 cycles. Cleaned-gas pollutants were quantified by compound-resolved gas chromatography–mass spectrometry (GC–MS) after solid-phase adsorption (SPA) sampling, while phenolics and polycyclic aromatic hydrocarbons (PAHs) in scrubber water were determined by extraction followed by GC–MS. Feasibility within each end-use tier was defined as simultaneous satisfaction of tier-specific cleaned-gas thresholds (C_tar, C_BTEX, I_N, and I_S) and the corresponding water-loop hazard limit (I_tox), using literature-informed engineering screening criteria. The results showed that stronger scrubbing reduced gas-phase tar and BTEX burdens, whereas extended water reuse caused systematic accumulation of phenolics and PAHs and increased the composite water-loop hazard index. Boiler-grade operation remained feasible across a broad operating range, with 23 of the 27 tested conditions remaining robust, whereas internal combustion engine combined heat and power (ICE-CHP) feasibility was restricted to a narrow robust regime, and no robust microturbine-grade condition was identified. These findings show that operating windows for RDF pyrolysis must be defined jointly by gas cleanliness and water-loop management constraints. Full article

Background: Renal dysfunction is common in patients hospitalized with acute decompensated heart failure (ADHF) and represents a key component of cardiorenal syndrome. However, the relationships between renal impairment, cardiorenal biomarkers, and echocardiographic markers of myocardial function remain incompletely characterized in ADHF populations. Methods: We conducted a cross-sectional analysis of 144 consecutive patients hospitalized with ADHF. Renal dysfunction was defined as an estimated glomerular filtration rate (eGFR) < 60 mL/min/1.73 m². Clinical, laboratory, and echocardiographic parameters were compared according to renal function. Correlation analyses, multivariable logistic regression, and receiver operating characteristic (ROC) curve analyses were performed to evaluate associations between renal dysfunction, cardiorenal biomarkers, and myocardial functional indices. Results: Patients with renal dysfunction were older (p = 0.002) and more frequently had diabetes mellitus (p = 0.006). Echocardiographic evaluation demonstrated significantly lower systolic mitral annular velocity (S′) (p < 0.001) and higher E/e′ ratios (p < 0.001) in patients with renal dysfunction, whereas left ventricular ejection fraction (p = 0.133) and global longitudinal strain (GLS) (p = 0.121) were similar between groups. Log-transformed NT-proBNP and albuminuria were significantly correlated with S′, GLS, and E/e′ (all p < 0.001). In multivariable analysis adjusted for clinically relevant confounders, chronic kidney disease (OR 8.16, 95% CI 2.13–31.34; p = 0.002) and the E/e′ ratio (OR 2.01, 95% CI 1.52–2.66; p < 0.001) remained independently associated with renal dysfunction. ROC analysis showed that E/e′ had the strongest ability to distinguish between patients with and without renal dysfunction (AUC 0.887, 95% CI 0.834–0.941; p < 0.001). Conclusions: Renal dysfunction in ADHF is associated with echocardiographic markers reflecting impaired longitudinal myocardial function and elevated filling pressure, with E/e′ emerging as the strongest echocardiographic correlate. The integration of echocardiographic parameters with cardiorenal biomarkers may improve the characterization of the cardiorenal profile in patients hospitalized with ADHF. Full article

This study was carried out to investigate the antimicrobial performance and color stability of silver (Ag)-modified polyurethane and waterborne coating systems applied to Oriental beech (Fagus orientalis L.) wood after the specimens were subjected to UV aging for 24 h. Antimicrobial activity and color stability were evaluated before and after aging against Escherichia coli (E. coli, ATCC 25922), Staphylococcus aureus (S. aureus, NCTC 13552), and Candida albicans (C. albicans) in accordance with the JIS Z 2801 standard. Color changes were determined using CIELab parameters (ΔL*, Δa*, Δb*, and ΔE*) in accordance with the TS EN ISO 16474-3 standard. Prior to UV exposure, the highest antibacterial activity against E. coli occurred in Ag-modified waterborne varnish coatings, whereas the highest antifungal activity against C. albicans occurred in Ag-modified polyurethane paint systems. After UV aging, antimicrobial performance varied depending on the coating type. Particularly, Ag-modified waterborne varnish coatings retained significant antibacterial activity against E. coli and S. aureus and exhibited the highest antifungal performance against C. albicans. Color analysis revealed that UV exposure also caused significant changes in all coating systems. The most pronounced variations were observed for the lightness difference (ΔL*), red–green color difference (Δa*), and yellow–blue color difference (Δb*) parameters, while the lowest total color difference (ΔE*) values were observed for Ag-modified polyurethane and Ag-modified waterborne varnish coatings. Overall, Ag-modified waterborne varnish systems demonstrated superior performance in both antimicrobial activity and color stability after UV aging. Full article

Understanding the genetic changes that allow avian influenza A viruses (IAVs) to switch their natural hosts and establish productive infection in humans is important for pandemic risk assessment. Adaptations in the IAV polymerase are required to overcome species-specific restrictions imposed by host ANP32 proteins. Notably, avian virus polymerase is generally only poorly supported by human ANP32 proteins due to species-specific differences. Consequently, efficient polymerase adaptation to the binding interface of human ANP32 requires distinct amino acid changes, such as PB2 E627K. A separate adaptation, PB2 M631L, has recently been reported in mammalian-adapted IAV; however, its functional role across divergent viral lineages and its relationship to host ANP32-dependent adaptation remain incompletely defined. Here, we examine PB2 M631L in the polymerases of a 1918 pandemic strain, a recombinant contemporary H1N1pdm09, and a recent clade 2.3.4.4b H5N1 virus. Using polymerase activity and protein-interaction assays, we show that PB2 M631L enhances polymerase activity and ANP32 binding in human—but not avian—contexts, and that this effect is conserved across multiple viral backgrounds. In H1N1pdm09, PB2 M631L also increased virus replication in mammalian cells. These findings indicate that PB2 M631L contributes to enhanced polymerase compatibility with human ANP32 proteins and are consistent with a role in adaptation across multiple influenza virus lineages. Our results highlight how analysis of historical pandemic strains can inform risk assessment for future emerging viruses. Full article

Background/Objectives: Seasonal waves of respiratory viruses—including SARS-CoV-2, influenza A virus (IAV), and respiratory syncytial virus (RSV)—continue to pose a global health burden and highlight the need for antiviral agents that are effective, safe, broadly active, affordable, and widely accessible. Current interventions are limited by the need for their early administration, the risk of resistance, their costs, and the restricted availability in large parts of the world. For certain natural products, such as European black elderberry (Sambucus nigra L.) fruit extract (ElderCraft^®; EC) and the seaweed-derived sulfated polymer iota-carrageenan (IC), antiviral activities against respiratory viruses, particularly IAV and SARS-CoV-2, have previously been shown. Here, we assessed the antiviral activity of IC and an anthocyanin-standardized EC extract against SARS-CoV-2, IAV, and RSV, either as monotherapy or in multiple-dose combinations. Methods: MDCKII cells were infected with IAV_PR8, human Calu-3 lung epithelial cells with the SARS-CoV-2 Omicron variant, and HEp-2 cells with RSV (A2 strain). Inhibitors were administered either by pre-incubation of cell-free virions prior to infection or, in separate time-of-addition experiments, during or post-infection. Viral replication was quantified by qRT-PCR or intracellular immunostaining. Cytotoxicity was evaluated using a neutral red uptake assay. Results: Most intriguingly, both EC and IC are able to neutralize virions derived from SARS-CoV-2, IAV, or RSV extracellularly in a dose-dependent manner. Notably, EC and IC alone exhibited strong anti-RSV activity, which was not reported previously. Most importantly, combined treatment with IC and EC caused a pronounced synergistic antiviral effect against the tested viruses, as confirmed by the Bliss independence model, without any detectable impact on cell viability. Finally, solutions prepared from matrix-standardized mono- or combi-lozenges, containing IC and/or EC in high or low doses, reproduced the antiviral and synergistic combination effects observed with the pure compounds. Conclusions: In summary, these findings support further development of EC and IC as a topically accessible, virion-neutralizing combination (e.g., lozenges) to provide additional protection against major respiratory viruses and potentially strengthen pandemic preparedness. Full article

In this study, TiO₂ nanoparticles (NPs), CdS NPs and TiO₂/CdS nanocomposite were synthesized via the sol–gel, hydrothermal and ex situ method, respectively. The synthesized materials were characterized using XRD, UV–vis DRS, FTIR, SEM, and EDX analysis. XRD analysis confirmed the crystalline structure of the as-prepared samples, while the bandgap energy of TiO₂ NPs, CdS NPs, and TiO₂/CdS nanocomposite were determined to be 2.98, 1.94, and 2.27 eV, respectively. Photocatalytic efficiency of TiO₂ NPs, CdS NPs, and TiO₂/CdS nanocomposite was systematically evaluated by photocatalytic degradation of crystal violet (CV) dye under visible-light irradiation. Under optimized reaction conditions of [CV concentration] = 20 mg/L, [catalyst dosage] = 0.25 g/L, and pH = 6, TiO₂/CdS nanocomposite achieved 86.3% removal of CV within 180 min, outperforming pure TiO₂ NPs (16.4%) and CdS NPs (66.9%). The enhanced performance of TiO₂/CdS nanocomposite as compared to CdS NPs is attributed to improved charge separation via heterojunction formation, while significantly superior performance over TiO₂ demonstrates successful visible-light activation. Further optimization study revealed that maximum removal efficiency of CV (97.1%) was achieved at lower dye concentration (10 mg/L). Photocatalytic degradation of CV followed pseudo-first-order kinetics. Moreover, scavenger experiments confirmed hydroxyl radicals (^•OH) as dominant reactive species. Furthermore, the TiO₂/CdS nanocomposite demonstrated good reusability with minimal activity loss after five runs. Additionally, the as-prepared nanocomposites showed significant antibacterial activity against Pseudomonas aeruginosa (P. aeruginosa). The present study indicated that TiO₂/CdS nanocomposite could be simultaneously used for degradation of organic pollutants as well as for removal of microorganisms while targeting environmental sustainability and water purification. Full article

Activated carbons are usually prepared from natural precursors (e.g., fruit stones or nutshells) by carbonization and activation processes carried out at 400–1000 °C. They exhibit well-developed porosity, and chemical activation introduces hydrophilic functional groups on their surface, providing excellent sorption properties. However, the high temperatures required during thermal treatment increase production costs. In this work, cost-reducing methods for preparing carbon sorbents are proposed. Carbonization of H₃PO₄ activated waste pistachio nutshells was performed using classical pyrolysis (500 or 550 °C, 30 min, N₂ atmosphere) and microwave treatment (power 1000 W, 20 min). The properties of the synthesized carbons were characterized using thermogravimetry and spectroscopic techniques including infrared (ATR), Raman, photoelectron (XPS) spectroscopies, and scanning electron microscopy with energy-dispersive X-ray spectroscopy (SEM-EDS). Porous structure parameters were determined using nitrogen adsorption experiments. The efficiency of Pb²⁺ removal from spiked ultrapure, tap and river water was evaluated by batch sorption experiments and inductively coupled plasma–mass spectrometry. The most porous carbons were those prepared at 500 and 550 °C, with specific surface areas of 910 and 256 m²/g, respectively. Surface phosphates increased the Pb²⁺ sorption efficiency to 99% from ultrapure water, at an initial concentration of 300 µg Pb²⁺/L. The material obtained with the microwave method was not fully carbonized and remained nonporous, but it also exhibited 99% Pb²⁺ uptake from ultrapure water due to the presence of oxygen-containing surface groups. The Pb²⁺ removal from spiked tap and river water reached up to 84% and 94%, respectively, at the spiking level of 300 µg Pb²⁺/L. Full article

Aflatoxin B1 (AFB1) poses a serious threat to global food and feed safety. Laccase-based enzymatic degradation represents a promising green strategy for AFB1 removal; however, its industrial application is severely limited by the rapid thermal inactivation of wild-type enzymes under high-temperature processing conditions (>70 °C). Here, we engineered the thermal stability of a laccase from Bacillus amyloliquefaciens B10 through an integrated strategy combining computational structural biology with semi-rational design. By coupling molecular dynamics (MD) simulations with folding free-energy (ΔΔG) calculations, we identified key flexible regions associated with thermal instability and subsequently implemented iterative saturation mutagenesis. The best single mutant, R196C, retained more than 96% relative activity after heat treatment at 80 °C for 10 min. Further iterative mutational stacking progressively enhanced thermostability: the R90E/R196C double mutant showed 1.25-fold higher activity at 80 °C than R196C, and the R90E/R196C/H54F triple mutant showed a further 1.16-fold increase over the double mutant. The final quadruple mutant, R90E/R196C/H54F/R253I, achieved 86.9% AFB1 degradation at 80 °C after 24 h. High-temperature MD simulations (100 ns at 353.15 K) indicated that the enhanced thermostability was associated with reduced conformational flexibility, lower radius of gyration (Rg) and solvent-accessible surface area (SASA), and a coil-to-β-sheet transition that contributed to stabilization of the protein core. In addition, efficient secretory expression of the engineered enzyme was achieved in Pichia pastoris, reaching 3.0 U/mL, while the crude enzyme maintained more than 70% activity at 80 °C. Collectively, these results provide a practical basis for the rational engineering and scalable production of thermostable biocatalysts for AFB1 detoxification-related applications of AFB1 control, and offer broader insights into the targeted enhancement of thermal stability in industrial enzymes. Full article

Listeria monocytogenes is considered a highly persistent risk for public health in food production facilities. Food business operators manufacturing ready-to-eat foods (RTE) are required to sample processing areas for L. monocytogenes as part of their environmental monitoring plans. The aim of the study was to identify suitable sampling devices, demonstrating the crucial role of the sampling technique in the method performance for L. monocytogenes monitoring. Detection of Listeria spp. and L. monocytogenes from surfaces in an RTE food production facility was evaluated by using two different sampling methods (swabs and sponges). When using swabs, 46 sampling points were negative for both targets. However, when sampling same points with sponges, 30% samples (14 out of 46) were positive for Listeria spp. with 8 samples (17%) positive for L. monocytogenes. During subsequent in vitro experiments, L. monocytogenes strains spiked onto three different surfaces (stainless steel, Teflon and epoxy) showed recoveries of between 76% and 93% when using sponges, while in swabs, recoveries where always below 50%. All L. monocytogenes strains isolated belonged to the major clonal complexes (CC) circulating in Europe in food industry (e.g., CC121 and CC9) and none of them are considered among the hypervirulent strains. Genomic analysis, including new tools for source tracking (Gene Up Typer, bioMérieux) showed differences between strains isolated from different risk hygienic zones. Full article

This research presents a hybrid geometric computed torque control method for an aerial manipulation system composed of a quadrotor UAV and a 2-DOF planar manipulator. The fully coupled system’s dynamic model is derived following the Euler–Lagrange (E-L) formulation. The proposed control architecture leverages the geometric controller provided by the RotorS simulator as a high-level quadrotor trajectory tracking module. Tracking reference commands are generated using the geometric SE(3) position controller, which computes desired translational and angular accelerations from position/velocity and attitude/angular rate errors, respectively, serving as input to the low-level computed torque controller that explicitly accounts for the coupled 8-DoF aerial manipulator system dynamics. The desired generalized acceleration vector ${\ddot{\mathbf{q}}}_{\mathrm{des}}$ combines quadrotor translational and rotational acceleration commands with a PD-based joint acceleration command for the attached manipulator. The computed torque controller produces generalized forces for the coupled system, which are subsequently separated into quadrotor forces and moments and manipulator joint torques. The resulting quadrotor forces and moments are mapped to rotor speeds using the standard RotorS control allocation matrix, while the manipulator joints are controlled at the torque level via ROS built-in effort controllers. Extensive simulated experiments demonstrate the effectiveness of the coupled hybrid approach compared to decoupled control strategies, showing significant improvements in tracking accuracy and dynamic response. Full article

Background: Pneumococcal conjugate vaccines (PCVs) prevent severe disease in children, but high costs limit access. PCV10-SII (PNEUMOSIL), a 10-valent PCV prequalified by the World Health Organization (WHO) in 2019, offers a cost-effective alternative. This study assessed its safety and immunogenicity in Vietnamese children aged 6 weeks–24 months. Methods: An open-label, single-arm study enrolled 304 children in three age groups: 6 weeks–6 months (n = 151), >6–12 months (n = 76), and >12–24 months (n = 77). Participants received two or three doses. Safety was evaluated through immediate reactions, adverse events (AEs), serious adverse events (SAEs), and withdrawals. Immunogenicity was measured 28 days after the final dose using serotype-specific IgG geometric mean concentrations (GMCs), opsonophagocytic activity (OPA) titers, and seroresponse rates. The trial was approved by the IRB of the National Ethics Council (code: No. 75/CN-HĐĐĐ on date 4 June 2021) and was registered with ClinicalTrials.gov, NCT05140720. Results: Of 304 enrolled participants, 294 (96.7%) completed follow-up. No immediate adverse events or serious adverse events occurred. Unsolicited adverse events were reported in 17%, mainly respiratory, while serious adverse events occurred in 4%. Mild local/systemic reactions (e.g., injection site pain, crying) resolved without sequelae. Immunogenicity was strong, with GMCs 1.8–9.11 µg/mL, GMTs 277.8–22,342, and seroresponse rates >90% for 9 of 10 serotypes, serotype 6B demonstrated a slightly lower seroresponse rate of 88.6%. Conclusions: PCV10-SII demonstrated favorable safety and robust immunogenicity, supporting its inclusion in national immunization programs as an affordable option for pneumococcal disease prevention. Full article

Background: Bedaquiline (BDQ) resistance poses a serious threat to its long-term efficacy, particularly in high-burden settings like South Africa, where data remain scattered and largely non-synthesized. Objective: This study aimed to estimate the trends of BDQ resistance in drug resistant tuberculosis (DR-TB), characterize associated resistance mechanisms, and evaluate implications for treatment outcomes in South Africa. Eligibility criteria: We included primary studies reporting BDQ resistance, resistance mechanisms, minimum inhibitory concentrations (MICs), or treatment outcomes among patients with MDR- or XDR-TB treated with BDQ-containing regimens in South Africa. Information sources: PubMed, Web of Science, and Embase were searched for studies published between January 2016 and July 2024. Risk of bias: Study quality was assessed using the Joanna Briggs Institute (JBI) Critical Appraisal Checklist. Synthesis of results: Random-effects meta-analysis with Freeman–Tukey double-arcsine transformation was used to estimate pooled BDQ resistance prevalence. Heterogeneity, sensitivity analyses, and publication bias were assessed. Results: Twenty-eight studies were included. The pooled prevalence of BDQ resistance was 6.0% (95% CI: 4.1–7.9%; I² = 62%). Treatment success averaged 63.5%, and culture conversion reached 84.1%. Resistance-associated mutations were most frequently reported in Rv0678, followed by atpE and pepQ, often associated with elevated MICs (≥2–4 μg/mL). Evidence of small-study effects was observed (Egger’s test, p = 0.0012). A pooled prevalence estimate was calculated; however, evidence of small-study effects suggests that estimates should be interpreted cautiously. Limitations: Heterogeneity in study design, outcome definitions, and resistance testing methods limited comparability across studies. Conclusions: Bedaquiline remains effective for DR-TB treatment in South Africa; however, emerging resistance and its molecular drivers pose a growing threat to regimen sustainability, including BPaL. Strengthened surveillance and standardized resistance testing are urgently needed. Full article

Escherichia coli (E. coli) is a microorganism commonly found in water and food matrices, and its rapid and accurate detection is crucial for maintaining public health and ensuring food safety. However, traditional molecularly imprinted polymer (MIP) sensors often face challenges such as tedious template removal and prolonged sensing times. This study develops a label-free bacterial molecularly imprinted sensor that utilizes the synergistic effect of polypyrrole (PPy) and multi-walled carbon nanotubes (MWCNTs) to achieve highly sensitive detection of E. coli. Based on the large specific surface area and superior conductivity of MWCNTs, as well as the favorable electrochemical polymerization properties of PPy, a PPy/MWCNTs composite film was fabricated via a one-step electropolymerization process. The prepared sensor exhibited excellent kinetic characteristics, with a template removal time of only 15 min, and could be regenerated and used for subsequent detection within 30 min. Under optimized conditions, the biosensor showed a satisfactory linear response over the concentration range of 10²–10⁸ CFU/mL, with a low detection limit of 65 CFU/mL (3σ/S). Furthermore, recovery experiments conducted in tap water and lemon juice samples yielded satisfactory recoveries ranging from 87.1% to 114.8%, demonstrating the reliability and practical applicability of the proposed sensor for bacterial detection in real samples. This sensor offers advantages such as simple preparation, low material cost, and high sensitivity, providing a reliable and practical analytical platform for the rapid and reliable detection of bacteria. Full article