Search Results (37)

Row crops are regarded as a transitional type between continuous and discrete vegetation. Previous studies idealized row crops as periodic hedgerows with rectangular cross-sections. However, these models relied on oversimplified assumptions, failing to capture the intrinsic heterogeneity of canopy or its dynamic evolution over the life cycle. In 2020, we proposed a row crop model with a gradual decrease in leaf area volume density (LAVD) from the center of the row to the edge, partially overcoming these limitations. Building on this previous model, this paper introduces the leaf shape factor proposed by Mõttus et al. into the model. Three control parameters, a leaf width control parameter (β), leaf length control parameter (ψ), and leaf azimuth control parameter (e), are proposed to regulate the spatial distribution of LAVD. Additionally, an empirical exponential function from Watanabe et al. is adopted to describe the leaf zenith angle distribution, enabling the realistic calculation of the G-function and Γ-function in conjunction with leaf azimuth distribution. The LAVD is formulated at three hierarchical scales: individual scale, row scale, and scene scale. The model delivers two key advancements: enabling pronounced spatial heterogeneity and high tunability of the LAVD, and accurately simulating row crops throughout the life cycle, which bridges the row structure and continuous stages of row crops. Radiative transfer simulations are conducted to derive the bidirectional reflectance distribution function (BRDF), which is validated against the discrete anisotropic radiative transfer (DART) model. Comparisons across three growth stages demonstrated good consistency. Furthermore, this paper investigates the sensitivity of the BRDF to three control parameters (β, ψ, and e). The results indicate that changes in three parameters significantly affect the reflectance in the darkspot direction, leading to a maximum error of 22.6%. In carrying out remote sensing applications such as parameter inversion and yield estimation for row crops, the new model is recommended for more accurate BRDF simulations. Full article

Atmospheric aerosols significantly influence photosynthetically active radiation (PAR), critical for plant photosynthesis and ecosystem functioning. This study systematically reviewed recent research (2021–2025) on aerosol–PAR interactions. Using targeted keywords, 22 open-access articles from Scopus and Google Scholar were analyzed via VOSviewer for thematic, methodological, and geographic trends. Analysis revealed a strong concentration in Earth and Environmental Sciences, showcasing significant advances in radiative transfer modeling, remote sensing, and machine learning for estimating aerosol impacts on PAR. Studies primarily utilized satellite data and models (e.g., DART, SCOPE) to assess diffuse/direct radiation changes. The literature consistently demonstrates how aerosols modulate PAR, influencing canopy light penetration and photosynthetic efficiency. However, critical gaps persist, including limited field validation in tropical biomes (e.g., Amazon, Cerrado, Pantanal) and a lack of studies differentiating aerosol types like black and brown carbon. This synthesis underscores the need for expanded monitoring and integrated modeling efforts to improve understanding of aerosol–PAR interactions, particularly in underrepresented tropical regions. Full article

Vegetation indices, especially the normalized difference vegetation index (NDVI), are widely used in urban vegetation assessments. However, estimating the vegetation abundance in urban scenes using the NDVI has constraints due to the complex spectral signature related to the urban structure, materials and other factors compared to natural ground surfaces. This paper employs the 3D discrete anisotropic radiative transfer (DART) model to simulate the spectro-directional reflectance of synthetic urban scenes with various urban geometries and building materials using a flux-tracking method under shaded and sunlit conditions. The NDVI is calculated using the spectral radiance in the red (0.6545 μm) and near-infrared bands (0.865 μm). The effects of the urban material heterogeneity and 3D structure on the NDVI, and the performance of three NDVI-based fractional vegetation cover (FVC) inversion algorithms, are evaluated. The results show that the effects of the building material heterogeneity on the NDVI are negligible under sunlit conditions but not negligible under shaded conditions. The NDVI value of building components within synthetic scenes is approximately zero. The shaded road exhibits a higher NDVI value in comparison to the illuminated road because of scattering from adjacent pixels. In order to correct the effects of scattering caused by building geometry, the reflectance of the Landsat 8/OLI image is corrected using the sky view factor (SVF) and then used to calculate the FVC. Jilin-1 satellite images with high spatial resolution (0.5 m) are used to extract the vegetation cover and then aggregated to 30 m spatial resolution to calculate the FVC for validation. The results show that the RMSE is up to 0.050 after correction, while the RMSE is 0.169 before correction. This study makes a contribution to the understanding of the effects of the urban 3D structure and material reflectance on the NDVI and provides insights into the retrieval of the FVC in different urban scenes. Full article

Urban trees contribute to urban well-being but face challenging environments that can reduce their lifespan and increase young tree mortality. Although many studies have used remote sensing data to monitor the functional status of trees in rural areas, few have done so in urban areas to assess the health or estimate the biomass of large green areas. This study assessed the suitability of using Sentinel-2 images to characterize two urban tree functional traits—leaf chlorophyll content (Cab) and leaf area density (LAD)—in isolated trees and tree rows. Simulated Sentinel-2 images were generated using the DART radiative transfer model, considering 16 tree-endogenous and 14 tree-exogenous parameters, with 15 vegetation indices (VIs) analyzed. Sensitivity analysis was performed in four contrasting urban environments using local climate zone taxonomy. The accuracy of the simulated images was validated with real Sentinel-2 images, field measurements, and ancillary data collected for four tree species in Rennes, France. The results showed that the tree parameters significantly influenced Sentinel-2 spectral bands, with NGBDI and OSAVI VIs being most sensitive to Cab and LAD. The model showed high accuracy, with a mean RMSE of 0.016 for key spectral bands. The results also highlighted the importance of considering ancillary data to capture specific urban characteristics. Full article

Leaf chlorophyll content is a major indicator of plant health and productivity. Optical remote sensing estimation of chlorophyll limits its retrievals to two-dimensional (2D) estimates, not allowing examination of its distribution within the canopy, although it exhibits large variation across the vertical profile. Multispectral and hyperspectral Terrestrial Laser Scanning (TLS) instruments can produce three-dimensional (3D) chlorophyll estimates but are not widely available. Thus, in this study, 14 chlorophyll vegetation indices were developed using six wavelengths employed in commercial TLS instruments (532 nm, 670 nm, 808 nm, 785 nm, 1064 nm, and 1550 nm). For this, 200 simulations were carried out using the novel bidirectional mode in the Discrete Anisotropic Radiative Transfer (DART) model and a realistic forest stand. The results showed that the Green Normalized Difference Vegetation Index (GNDVI) of the 532 nm and either the 808 nm or the 785 nm wavelengths were highly correlated to the chlorophyll content (R² = 0.74). The Chlorophyll Index (CI) and Green Simple Ratio (GSR) of the same wavelengths also displayed good correlation (R² = 0.73). This study was a step towards canopy 3D chlorophyll retrieval using commercial TLS instruments, but methods to couple the data from the different instruments still need to be developed. Full article

Urban trees play an important role in mitigating effects of climate change and provide essential ecosystem services. However, the urban environment can stress trees, requiring the use of effective monitoring methods to assess their health and functionality. The objective of this study, which focused on four deciduous tree species in Rennes, France, was to evaluate the ability of hybrid inversion models to estimate leaf chlorophyll content (LCC), leaf area index (LAI), and canopy chlorophyll content (CCC) of urban trees using eight Sentinel-2 (S2) images acquired in 2021. Simulations were performed using the 3D radiative transfer model DART, and the hybrid inversion models were developed using machine-learning regression algorithms (random forest (RF) and gaussian process regression). Model performance was assessed using in situ measurements, and relations between satellite data and in situ measurements were investigated using spatial allocation (SA) methods at the pixel and tree scales. The influence of including environment features (EFs) as model inputs was also assessed. The results indicated that random forest models that included EFs and used the pixel-scale SA method were the most accurate with R² values of 0.33, 0.29, and 0.46 for LCC, LAI, and CCC, respectively, with notable variability among species. Full article

Radiative transfer models (RTMs) are often used to retrieve biophysical parameters from earth observation data. RTMs with multi-temporal and realistic forest representations enable radiative transfer (RT) modeling for real-world dynamic processes. To achieve more realistic RT modeling for dynamic forest processes, this study presents the 3D-explicit reconstruction of a typical temperate deciduous forest in 2015 and 2022. We demonstrate for the first time the potential use of bitemporal 3D-explicit RT modeling from terrestrial laser scanning on the forward modeling and quantitative interpretation of: (1) remote sensing (RS) observations of leaf area index (LAI), fraction of absorbed photosynthetically active radiation (FAPAR), and canopy light extinction, and (2) the impact of canopy gap dynamics on light availability of explicit locations. Results showed that, compared to the 2015 scene, the hemispherical-directional reflectance factor (HDRF) of the 2022 forest scene relatively decreased by 3.8% and the leaf FAPAR relatively increased by 5.4%. At explicit locations where canopy gaps significantly changed between the 2015 scene and the 2022 scene, only under diffuse light did the branch damage and closing gap significantly impact ground light availability. This study provides the first bitemporal RT comparison based on the 3D RT modeling, which uses one of the most realistic bitemporal forest scenes as the structural input. This bitemporal 3D-explicit forest RT modeling allows spatially explicit modeling over time under fully controlled experimental conditions in one of the most realistic virtual environments, thus delivering a powerful tool for studying canopy light regimes as impacted by dynamics in forest structure and developing RS inversion schemes on forest structural changes. Full article

This paper highlights the advantages of an affordable multi-wavelength ground-based camera, called WaltRCam, for monitoring Aerosol Optical Depth (AOD) in a clear case over a peri-urban area. To simulate the performance of this low-cost camera, for which data are not yet available, we use data from an expensive hyperspectral camera (HSI) to mimic its characteristics. Our methodology is based on the construction of look-up tables using the DART (Discrete Anisotropic Radiative Transfer) 3D radiative transfer model. DART simulates the different spectra observed by the WaltRCam camera, which then provides the AODs for all image pixels in near-real-time. Moreover, DART is coupled to a 3D scale-model of the city of Toulouse (dating from 2014) to model complex urban geometries and to associate specific optical properties to the various objects that make up the environment. Moreover, we use a neural-network-based method to recognize the various objects in the image in order to take into account only pixels common between the observations. In this way, we take account of changes to the peri-urban area, such as vegetation growth, construction, demolition of buildings, etc. The results of this study show that the WaltRCam camera, by capturing eight wavelengths, can deliver convincing results compared with ground and satellite reference data, with a correlation coefficient of 0.9 and an average RMSE of less than 0.02. Full article

Light detection and ranging (LiDAR) is a widely used technology for the acquisition of three-dimensional (3D) information about a wide variety of physical objects and environments. However, before conducting a campaign, a test is typically conducted to assess the potential of the utilized algorithm for information retrieval. It might not be a real campaign but rather a simulation to save time and costs. Here, a multi-platform LiDAR simulation model considering the location, direction, and wavelength of each emitted laser pulse was developed based on the large-scale remote sensing (RS) data and image simulation framework (LESS) model, which is a 3D radiative transfer model for simulating passive optical remote sensing signals using the ray tracing algorithm. The LESS LiDAR simulator took footprint size, returned energy, multiple scattering, and multispectrum LiDAR into account. The waveform and point similarity were assessed with the LiDAR module of the discrete anisotropic radiative transfer (DART) model. Abstract and realistic scenes were designed to assess the simulated LiDAR waveforms and point clouds. A waveform comparison in the abstract scene with the DART LiDAR module showed that the relative error was lower than 1%. In the realistic scene, airborne and terrestrial laser scanning were simulated by LESS and DART LiDAR modules. Their coefficients of determination ranged from $0.9108$ to $0.9984$. Their mean was $0.9698$. The number of discrete returns fitted well and the coefficient of determination was $0.9986$. A terrestrial point cloud comparison in the realistic scene showed that the coefficient of determination between the two sets of data could reach $0.9849$. The performance of the LESS LiDAR simulator was also compared with the DART LiDAR module and HELIOS++. The results showed that the LESS LiDAR simulator is over three times faster than the DART LiDAR module and HELIOS++ when simulating terrestrial point clouds in a realistic scene. The proposed LiDAR simulator offers two modes for simulating point clouds: single-ray and multi-ray modes. The findings demonstrate that utilizing a single-ray simulation approach can significantly reduce the simulation time, by over 28 times, without substantially affecting the overall point number or ground pointswhen compared to employing multiple rays for simulations. This new LESS model integrating a LiDAR simulator has great potential in terms of simultaneously simulating LiDAR data and optical images based on the same 3D scene and parameters. As a proof of concept, the normalized difference vegetation index (NDVI) results from multispectral images and the vertical profiles from multispectral LiDAR waveforms were simulated and analyzed. The results showed that the proposed LESS LiDAR simulator can fulfill its design goals. Full article

Solar-induced chlorophyll fluorescence (SIF) has been found to be a useful indicator of vegetation’s gross primary productivity (GPP). However, the directional SIF observations obtained from a canopy only represent a portion of the total fluorescence emitted by all the leaf photosystems because of scattering and reabsorption effects inside the leaves and canopy. Hence, it is crucial to downscale the SIF from canopy level to leaf level by modeling fluorescence escape probability (f_esc) for improved comprehension of the relationship between SIF and GPP. Most methods for estimating f_esc rely on the assumption of a “black soil background,” ignoring soil reflectance and the effect of scattering between soils and leaves, which creates significant uncertainties for sparse canopies. In this study, we added a correction factor considering soil reflectance, which was modeled using the Gaussian process regression algorithm, to the semi-empirical NIRv/FAPAR model and obtained the improved f_esc model accounting for soil reflectance (called the f_{esc_GPR-SR} model), which is suitable for near-infrared SIF downscaling. The evaluation results using two simulation datasets from the Soil–Canopy–Observation of Photosynthesis and the Energy Balance (SCOPE) model and the Discrete Anisotropic Radiative Transfer (DART) model showed that the f_{esc_GPR-SR} model outperformed the NIRv/FAPAR model, especially for sparse vegetation, with higher accuracy for estimating f_esc (R² = 0.954 and RMSE = 0.012 for SCOPE simulations; R² = 0.982 and RMSE = 0.026 for DART simulations) compared with the NIRv/FAPAR model (R² = 0.866 and RMSE = 0.100 for SCOPE simulations; R² = 0.984 and RMSE = 0.070 for DART simulations). The evaluation results using in situ observation data from multi-species canopies also suggested that the leaf-level SIF calculated by the f_{esc_GPR-SR} model tracked better with photosynthetic active radiation absorbed by green components (APAR_green) for sparse vegetation (R² = 0.937, RMSE = 0.656 mW/m²/nm) compared with the NIRv/FAPAR model (R² = 0.921, RMSE = 0.904 mW/m²/nm). The leaf-level SIF calculated by the f_{esc_GPR-SR} model was less sensitive to observation angles and differences in canopy structure among multiple species. These results emphasize the significance of accounting for soil reflectance in the estimation of f_esc and demonstrate that the f_{esc_GPR-SR} model can contribute to further exploring the physiological mechanism between SIF and GPP. Full article

High-resolution albedo has the advantage of a higher spatial scale from tens to hundreds of meters, which can fill the gaps of albedo applications from the global scale to the regional scale and can solve problems related to land use change and ecosystems. The Sentinel-2 satellite provides high-resolution observations in the visible-to-NIR bands, giving possibilities to generate a high-resolution surface albedo at 10 m. This study attempted to evaluate the performance of the four data-driven machine learning algorithms (i.e., random forest (RF), artificial neural network (ANN), k-nearest neighbor (KNN), and XGBoost (XGBT)) for the generation of a Sentinel-2 albedo over flat and rugged terrain. First, we used the RossThick-LiSparseR model and the 3D discrete anisotropic radiative transfer (DART) model to build the narrowband surface reflectance and broadband surface albedo, which acted as the training and testing datasets over flat and rugged terrain. Second, we used the training and testing datasets to drive the four machine learning models, and evaluated the performance of these machine learning models for the generation of Sentinel-2 albedo. Finally, we used the four machine learning models to generate a Sentinel-2 albedo and compared them with in situ albedos to show the models’ application potentials. The results show that these machine learning models have great performance in estimating Sentinel-2 albedos at a 10 m spatial scale. The comparison with in situ albedos shows that the random forest model outperformed the others in estimating a high-resolution surface albedo based on Sentinel-2 datasets over the flat and rugged terrain, with an RMSE smaller than 0.0308 and R² larger than 0.9472. Full article

Anisotropic canopy reflectance plays a crucial role in estimating vegetation biophysical parameters, whereas soil reflectance anisotropy affects canopy reflectance. However, woodland canopy bidirectional reflectance distribution function (BRDF) models considering soil anisotropy are far from universal, especially for the BRDF models of mountain forest. In this study, a mountain forest canopy model, named geometric-optical and mutual shadowing and scattering from arbitrarily inclined-leaves model coupled with topography (GOSAILT), was extended to consider the soil anisotropic reflectance characteristics by introducing the simple soil directional (SSD) reflectance model. The modified GOSAILT model (named GOSAILT-SSD) was evaluated using unmanned aerial vehicle (UAV) field observations and discrete anisotropic radiative transfer (DART) simulations. Then, the effects of Lambertian soil assumption on simulating the vi-directional reflectance factor (BRF) were evaluated across different fractions of vegetation cover (Cv), view zenith angles (VZA), solar zenith angles (SZA), and spectral bands with the GOSAILT-SSD model. The evaluation results, with the DART simulations, show that the performance of the GOSAILT-SSD model in simulating canopy BRF is significantly improved, with decreasing RMSE, from 0.027 to 0.017 for the red band and 0.051 to 0.037 for the near-infrared (NIR) band. Meanwhile, the GOSAILT-SSD simulations show high consistency with UAV multi-angular observations (R² = 0.97). Besides, it is also found that the BRF simulation errors caused by Lambertian soil assumption are too large to be neglected, with a maximum relative bias of about 45% for the red band. This inappropriate assumption results in a remarkable BRF underestimation near the hot spot direction and an obvious BRF overestimation for large VZA in the solar principal plane (PP). Meanwhile, this simulation bias decreases with the increase of fraction of vegetation cover. This study provides an effective technique to improve the capability of the mountain forest canopy BRDF model by considering the soil anisotropic characteristics for advancing the modeling of radiative transfer (RT) processes over rugged terrain. Full article

One of the main initiatives for China to achieve the goal of being carbon neutral before 2060 is transforming monocultures into mixed plantations in subtropical China, because mixed forests possess a higher quality than monocultures in various ways. Very high spatial resolution (VHR) satellite imagery is very promising to precisely monitor the transformation process under the premise of clarifying the canopy reflectance anisotropy of mixed plantations. However, it is almost impossible to understand the canopy reflectance anisotropy of mixed plantations with real satellite data due to the extreme lack of multiangular VHR satellite images. In this study, the effects of the mixture mode on the canopy bidirectional reflectance factor (BRF) were comprehensively analyzed with simulated VHR images. The three-dimensional (3D) Discrete Anisotropic Radiative Transfer model (DART) was used to construct a pure coniferous scene, a pure broadleaved scene, and 27 coniferous–broadleaved mixed plantation scenes containing 3 mixture patterns (i.e., mixed by single trees, mixed by stripes, and mixed by patches) and 9 mixing proportions (i.e., from 10% to 90% with the interval of 10%), and to simulate red (R) and near-infrared (NIR) VHR images for these 3D scenes at both the solar principal plane (SPP) and perpendicular plane (PP) under different solar-viewing geometries. Negative correlations were generally found between the canopy BRF and the ratio of conifers in a mixed stand. The anisotropy of conifer dominated plantations is more prominent than broadleaf dominated plantations, especially for the single tree mixture. Although the level of anisotropy is much lower for PP than SPP, it should not be ignored, especially for the R band. Observations under large viewing zenith angles at PP are more preferred to study the effect of mixing proportions, followed by forward observations at SPP. The R band image has higher potential to distinguish mixture patterns for broadleaf-dominated situations, while the NIR band image has a higher potential for conifer-dominated situations. Furthermore, the canopy BRF generally increases with the solar zenith angle, and one meter can be considered as the optimal spatial resolution for the optical monitoring of the mixture mode. The findings of the current study add some valuable theoretical knowledge for the accurate monitoring of coniferous–broadleaved mixed plantations with VHR imagery. Full article

The image-based modeling and simulation of plant growth have numerous and diverse applications. In this study, we used image-based and manual field measurements to develop and validate a methodology to simulate strawberry (Fragaria × ananassa Duch.) plant canopies throughout the Florida strawberry growing season. The simulated plants were used to create a synthetic image using radiative transfer modeling. Observed canopy properties were incorporated into an L-system simulator, and a series of strawberry canopies corresponding to specific weekly observation dates were created. The simulated canopies were compared visually with actual plant images and quantitatively with in-situ leaf area throughout the strawberry season. A simple regression model with L-system-derived and in-situ total leaf areas had an $Adj R^2$ value of 0.78. The L-system simulated canopies were used to derive information needed for image simulation, such as leaf area and leaf angle distribution. Spectral and plant canopy information were used to create synthetic high spatial resolution multispectral images using the Discrete Anisotropic Radiative Transfer (DART) software. Vegetation spectral indices were extracted from the simulated image and used to develop multiple regression models of in-situ biophysical parameters (leaf area and dry biomass), achieving $Adj R^2$ values of 0.63 and 0.50, respectively. The Normalized Difference Vegetation Index (NDVI) and the Red Edge Simple Ratio (SRre) vegetation indices, which utilize the red, red edge, and near infrared bands of the spectrum, were identified as statistically significant variables (p < 0.10). This study showed that both geometric (canopy seize metrics) and spectral variables were successful in modeling in-situ biomass and leaf area. Combining the geometric and spectral variables, however, only slightly improved the prediction model. These results show the feasibility of simulating strawberry canopies and images with inherent geometrical, topological, and spectral properties of real strawberry plants. The simulated canopies and images can be used in applications beyond creating realistic computer graphics for quantitative applications requiring the depiction of vegetation biological processes, such as stress modeling and remote sensing mission planning. Full article

In recent years, technology advancement has led to an enormous increase in the amount of satellite data. The availability of huge datasets of remote sensing measurements to be processed, and the increasing need for near-real-time data analysis for operational uses, has fostered the development of fast, efficient-retrieval algorithms. Deep learning techniques were recently applied to satellite data for retrievals of target quantities. Forward models (FM) are a fundamental part of retrieval code development and mission design, as well. Despite this, the application of deep learning techniques to radiative transfer simulations is still underexplored. The DeepLIM project, described in this work, aimed at testing the feasibility of the application of deep learning techniques at the design of the retrieval chain of an upcoming satellite mission. The Land Surface Temperature Mission (LSTM) is a candidate for Sentinel 9 and has, as the main target, the need, for the agricultural community, to improve sustainable productivity. To do this, the mission will carry a thermal infrared sensor to retrieve land-surface temperature and evapotranspiration rate. The LSTM land-surface temperature retrieval chain is used as a benchmark to test the deep learning performances when applied to Earth observation studies. Starting from aircraft campaign data and state-of-the-art FM simulations with the DART model, deep learning techniques are used to generate new spectral features. Their statistical behavior is compared to the original technique to test the generation performances. Then, the high spectral resolution simulations are convolved with LSTM spectral response functions to obtain the radiance in the LSTM spectral channels. Simulated observations are analyzed using two state-of-the-art retrieval codes and deep learning-based algorithms. The performances of deep learning algorithms show promising results for both the production of simulated spectra and target parameters retrievals, one of the main advances being the reduction in computational costs. Full article