Search Results (156)

4-Sulfanyl-1,2,3-triazole (L1) accelerated the solvent-free CuAAC efficiently with low catalyst loading (0.1 mol% for common azides and 1 mol% for sulfonyl azides). L1 exhibited higher catalytic activity compared to 1,4-substituted 1,2,3-triazole without sulfanyl group (5a) and sulfide, demonstrating that coordination of both sulfanyl and 1,2,3-triazole moieties with copper was critical to enhance the activity of L1. The Cu(OAc)₂/L1 catalytic system displayed high selectivity in synthesis of alkynyl- or azido-involved 1,2,3-triazoles. The di-copper system Cu(OAc)₂/CuBr/L1 promoted the reaction of electron-deficient and less reactive sulfonyl azides well, generating N-sulfonyl-1,2,3-triazoles in good yields, and L1 showed better performance than 1,3-di-o-tolylthiourea (L′). Other features of this protocol included recyclable ligand, 1:1 substance ratio, high yields, wide substance scope, and easily scaled up and facile purification of most products. Full article

1-Phenyl-4-p-tolyl-[1,2,3]triazole was obtained via a CuAAC reaction involving phenyl azide and 1-ethynyl-4-methylbenzene. The NMR spectra of the compound are discussed, and its crystal structure was studied by X-ray analysis. According to the latter analysis and a Hirshfeld surface analysis, the predominant intermolecular C-H⋅⋅⋅N and C-H⋅⋅⋅π interactions in this molecule are responsible for crystal packing. Full article

Electrochemical biosensors integrated into wearable devices have revolutionized the technology in terms of health monitoring and diagnostic systems. However, when it comes to moving the devices from the laboratory to real-world environments, a critical problem emerges with the interface. The problem, in essence, is that biorecognition elements tend to lose their activity, delaminate, and drift when exposed to various environmental stresses. The traditional methods for the immobilization of the biorecognition elements result in receptors with random orientations, hydrolytically unstable bonds, and batch-to-batch variability, regardless of the method, including physisorption or non-selective covalent attachment, like using EDC/NHS. This review is organized around a comparative question: which limitations of classical immobilization strategies (physisorption, self-assembled monolayers used as passive anchoring platforms, and EDC/NHS coupling) can be resolved by click chemistry, which can be resolved by mechanistic features? Accordingly, CuAAC, SPAAC, IEDDA, and thiol-ene/yne photoclick reactions are discussed, not as an isolated catalog of ligations, but as complementary solutions to specific interfacial failure modes, including random bioreceptor orientation, hydrolytically vulnerable attachment, poor batch reproducibility, catalyst sensitivity, and the difficulty of functionalizing soft polymeric or textile substrates. In this framework, click chemistry is treated as a deterministic interface-engineering strategy that enables defined covalent fixation, programmable probe density, and improved mechanical and electrochemical robustness under wearable operating conditions. Full article

Monoacylglycerol lipase (MAGL) is a key regulator of lipid signaling networks implicated in tumor progression and represents an attractive anticancer target. To combine MAGL inhibition with potentially enhanced uptake by highly glycolytic cancer cells, we designed glycoconjugated analogs of a N-benzoylpiperidine MAGL inhibitor scaffold bearing a glucopyranose unit. An alkyne-functionalized benzoylpiperidine intermediate was prepared and coupled to azido sugars through a CuAAC “click” reaction to afford two triazole-linked glycoconjugates. In a colorimetric assay on human MAGL, the new compounds 17 and 18 inhibited the enzyme with IC₅₀ values of 43.3 and 68.8 μM, respectively, confirming compatibility with MAGL inhibition albeit with reduced potency versus reference triazole-substituted benzoylpiperidine 13 (IC₅₀ = 4.1 μM). In PANC-1 pancreatic cancer cells, both glycoconjugates were inactive in high-glucose medium, but displayed antiproliferative activity under low-glucose conditions (GI₅₀ 17 = 129 μM; GI₅₀ 18 = 12 μM), consistent with glucose-dependent uptake/competition. Overall, these first-in-class MAGL-targeting glycoconjugates provide a starting point for optimizing dual MAGL inhibition and metabolically driven cellular selectivity. Full article

The cycloaddition reaction is one of the most common reactions in organic chemistry. It has been applied in various fields. Herein, we focus on the application of cycloaddition reactions in investigating biological molecules and materials using magnetic resonance techniques. To facilitate magnetic resonance studies such as electron paramagnetic resonance (EPR) spectroscopy and paramagnetic nuclear magnetic resonance (NMR) spectroscopy, there is often a requirement to attach spin labels and paramagnetic tags to the system of interest. The cycloaddition reaction is one of the ways to tether these spin labels and paramagnetic tags. In this review, we highlight the applications of various cycloaddition reactions such as the Cu(I)-catalyzed azide–alkyne cycloaddition (CuAAC) reaction, the strain-promoted azide–alkyne cycloaddition (SPAAC) reaction and the Diels–Alder reaction in the interdisciplinary field of magnetic resonance studies of biomolecules, including proteins, nucleic acids, carbohydrates, lipids and glycans, as well as materials. Full article

Click chemistry is highly valued in the design of polymeric biomaterials due to its ability to generate complex structures and localized surface modifications. However, prominent mechanisms in click chemistry, such as copper-catalyzed azide-alkyne cycloaddition (CuAAC), are inefficient for the synthesis and/or modification of biomaterials because they present significant limitations for in vivo applications. The presence of residual copper in the material is toxic and requires extensive purification, increasing production costs and hindering scalability and availability for in vivo applications. To overcome these limitations and ensure the safety and biocompatibility of materials, biorthogonal reactions such as strain-promoted azide-alkyne cycloaddition (SPAAC) have been developed. Thiol-ene/thiol-yne and Diels–Alder mechanisms are also relevant for the formation of robust polymer networks with specific characteristics and attractive advantages for generating biocompatible materials. These reactions not only improve cell integration and reduce fibrosis in in vivo applications but also enable the creation of functional structures for tissue regeneration. This review provides a comprehensive analysis of advances in the synthesis of biomaterials for tissue regeneration using hydrogels designed via click chemistry, as well as the various mechanisms and structural considerations. Full article

A synthetically accessible library of N-acyl sulfonamides was constructed using a combination of copper(I)-catalyzed azide–alkyne cycloaddition (CuAAC) and N-acylation of primary sulfonamides. The proposed two-step reaction sequence had a high experimentally confirmed synthetic success rate (up to 85%) and gave reasonable product yields (up to 61%). As a result of the validation process, a 262-member compound library (out of >70K accessible combinations) was prepared. Biological profiling of the synthesized library by differential scanning fluorimetry and enzymatic assays identified several low micromolar inhibitors of human carbonic anhydrase. The interaction of the discovered hits with the biological target was studied by docking and molecular dynamics. Full article

A method for the mechanochemical CuAAC click reaction (Cu⁺-promoted azido–alkyne cycloaddition) in the presence of bronze powder/copper beads without the use of a pre-introduced catalyst and ligands with greener prospect is presented. A new type of tri-, tetra-, and penta-ethylene glycols (PEGs) α,ω-disubstituted with 4-(PAH)-1H-1,2,3-triazole moieties has been synthesized by means of solvent-free click reaction in the planetary ball-milling in absence of a pre-introduced Cu(I) catalyst. The reaction afforded the above-mentioned compounds at room temperature in as short as 3 h in up to 96% yields and with E-factor values as low as 0.38. For the comparison, some of the key compounds were obtained by the conventional click synthesis in DMF solution. The compounds obtained were synthesized for the first time and can be considered as representative examples of bola-type chemosensors for the detection of electron-deficient species. This work presents a method for catalyzing a click reaction using bronze microparticles that are formed in situ during powder milling. This heterophase catalyst has been shown to be efficient and inexpensive and is suitable for green chemistry methods under solvent-free ball-milling conditions. Full article

A collection of 40 derivatives of 1,2-diphenyl-2-[1,2,3]triazol-1-yl-ethanol was obtained through a sequence of reactions, starting with benzoin as the initial raw material and using the CuAAC reaction as the key step in this process. The structure of a pair of these compounds was ultimately corroborated by single-crystal X-ray diffraction studies, which also reveals important O-H···N interactions. The antimicrobial activity of synthesized 1,2,3-triazoles was assessed against strains that include Candida albicans and Staphylococcus aureus. The antiproliferative properties of some of these novel compounds were also tested using a variety of tumor cell lines, including U251 (human glioblastoma), PC-3 (human prostate cancer cell line), K562 (human leukemia), HCT-15 (human colorectal adenocarcinoma), MCF-7 (human breast adenocarcinoma), and SKLU (human lung adenocarcinoma). Full article

Click chemistry, and particularly the Cu-catalyzed Azide Alkyne Cycloaddition (CuAAC) reaction has gained increased attention in recent years as an invaluable tool for synthesizing pharmaceutical active organic compounds. In this study, quinolinones and triazoles, two bioactive heterocyclic moieties amenable to various substitutions, were employed to design and synthesize novel quinolinone–triazole hybrid molecules via the CuAAC click reaction under microwave irradiation. The synthesized hybrid molecules and their alkyne precursors were structurally characterized and evaluated for their antioxidant capacity, lipoxygenase (LOX) inhibitory activity, cell viability using HaCaT epithelial cells, and cytotoxicity against two cancer lines. The results indicated that, among the precursors, alkyne 4c exhibits the best combined antioxidant and anti-inflammatory activity (100% lipid peroxidation inhibition, IC₅₀ = 22.5 μM for LOX inhibition); among the hybrid molecules, compound 5a was the most potent (98.0% lipid peroxidation inhibition, IC₅₀ = 10.0 μM for LOX inhibition). Regarding the assessment of HaCaT cell viability, all studied compounds showed encouraging results, with cell viability rates between 61.5% and 100%. Moreover, based on the results of the cytotoxicity against cancer lines A549 and A375, it emerged that the tested compounds exhibited moderate–low or no cytotoxicity. These results highlight the potential of quinolinone–triazole hybrids as valuable candidates in drug discovery. Full article

Nucleopeptides (NPs) are unnatural hybrid polymers designed by coupling nucleobases to the side chains of amino acid residues within peptides. In this study, we present the synthesis of an Fmoc-protected nucleobase amino acid (NBA) monomer (Fmoc-1,4-TzlNBA_A) with adenine attached to the side chain of L-homoazidoalanine (Aha) through a 1,4-linked-1,2,3-triazole. The coupling was accomplished by a Cu(I)-catalyzed azide–alkyne cycloaddition (CuAAC) of Fmoc-Aha and N9-propargyladenine. Subsequently, a homotrinucleopeptide (HalTzl_AAA) containing three 1,4-TzlNBA_A residues was synthesized, using different solid-phase peptide synthesis (SPPS) approaches, and its ability to recognize U-rich motifs of RNAs involved in the HIV replication cycle was studied using circular dichroism (CD) and fluorescence spectroscopy. CD curves confirmed the binding of HalTzl_AAA to U-rich motifs of the transactivation responsive element (TAR UUU RNA HIV-1) bulge and the anticodon stem–loop domain of human tRNALys3 (ASLLys3) by a decrease in the positive ellipticity band intensity around 265 nm during the complexation. 5′-(FAM(6))-labeled TAR UUU and hASLLys3 were used for fluorescence anisotropy binding studies. Fluorescence data revealed that HalTzl_AAA bound TAR’s UUU bulge with a moderate affinity (K_d ≈ 38 µM), whereas the ASLLys3 UUUU-containing loop sequence was recognized with 2.5 times lower affinity (with K_d ≈ 75 µM). Both the standard SPPS method and its variants, which involved the attachment of adenine to the L-Aha side chain using the click reaction during the synthesis on the resin or after the nucleopeptide cleavage, were characterized by a similar efficiency and yield. The CD and fluorescence results demonstrated that HalTzl_AAA recognized the U-rich sequences of the RNAs with moderate and varied affinities. It is likely that both the hydrogen bonds associated with the complementarity of the interacting sequences and the conformational aspects associated with the high conformational dynamics of U-rich motifs are important in the recognition process. The nucleopeptide represents a new class of RNA binders and may be a promising scaffold for the development of new antiviral drugs. Full article

Chitosan is a biopolymer with excellent properties such as biodegradability, biocompatibility, bioactivity, and non-toxicity, making it an attractive material for various applications. In this study, to enhance these properties particularly for the development of food coatings chitosan derivatives (1,2,3-triazoles) were synthesized via microwave-assisted 1,3-dipolar cycloaddition (CuAAC) using different terminal alkynes. The resulting compounds were obtained in high yields 79.7–88.0% and characterized by vibrational (IR) and electronic (UV–Visible) spectroscopy. Films were formed by combining the derivatives with PVA and characterized using differential scanning calorimetry (DSC), tensile strength testing, and water vapor permeability analysis. The resulting films exhibited improved mechanical properties, homogeneous thicknesses, low-porosity surfaces, and favorable barrier properties, highlighting their potential applicability as food coating materials. Full article

A synthetic methodology of the CuAAC “click” approach was exploited for the construction of 1,2-azolyltriazole quinine derivatives by the reaction of O-propargylquinine with azidomethyl-1,2-azoles in methanol. Quinine–piperidine and quinine–anabasine conjugates were obtained using a chloroacetate linker by reacting quinine chloroacetate with piperidine or anabasine in a diethyl ether medium. Cinchophene ester was obtained by the acylation of quinine with cinchophen acid chloride in methylene chloride. The antibacterial, fungicidal, analgesic and cytotoxic properties of the obtained compounds were examined. Full article

Estradiol (E2) plays an important role in cell proliferation and certain brain functions. To reveal its mechanism of action, its detectability is essential. Only a few fluorescent-labeled hormonally active E2s exist in the literature, and their mechanism of action usually remains unclear. It would be of particular interest to develop novel labeled estradiol derivatives with retained biological activity and improved optical properties. Due to their superior optical characteristics, aza-BODIPY dyes are frequently used labeling agents in biomedical applications. E2 was labeled with the aza-BODIPY dye at its phenolic hydroxy function via an alkyl linker and a triazole coupling moiety. The estrogenic activity of the newly synthesized fluorescent conjugate was evaluated via transcriptional luciferase assay. Docking calculations were performed for the classical and alternative binding sites (CBS and ABS) of human estrogen receptor α. The terminal alkyne function was introduced into the tetraphenyl aza-BODIPY core via selective formylation, oxidation, and subsequent amidation with propargyl amine. The conjugation was achieved via Cu(I)-catalyzed azide–alkyne click reaction of the aza-BODIPY-alkyne with the 3-O-(4-azidobut-1-yl) derivative of E2. The labeled estrogen induced a dose-dependent transcriptional activity of human estrogen receptor α with a submicromolar EC₅₀ value. Docking calculations revealed that the steroid part has a perfect overlap with E2 in ABS. In CBS, however, a head-tail binding deviation was observed. A facile, fluorescent labeling methodology has been elaborated for the development of a novel red-emitting E2 conjugate with substantial estrogenic activity. Docking experiments uncovered the binding mode of the conjugate in both ABS and CBS. Full article

Mechanochemical and transition-metal-catalyzed reactions of alkynes, exhibiting significant advantages like short reaction time, solvent-free, high yield and good selectivity, were considered to be green and sustainable pathways to access functionalized molecules and obtained increasing attention due to the superiorities of mechanochemical processes and the reactivities of alkynes. The ball milling and CuI-catalyzed Sonogashira coupling of alkyne and aryl iodide avoided the use of common palladium catalysts. The mechanochemical Rh(III)- and Au(I)-catalyzed C–H alkynylations of indoles formed the 2-alkynylated and 3-alkynylated indoles selectively. The mechanochemical and copper-catalyzed azide-alkyne cycloaddition (CuAAC) between alkynes and azides were developed to synthesize 1,2,3-triazoles. Isoxazole could be formed through ball-milling-enabled and Ru-promoted cycloaddition of alkyne and hydroxyimidel chloride. In this review, the generation of mechanochemical and transition-metal-catalyzed reactions of alkynes was highlighted. Firstly, the superiority and application of transition-metal-catalyzed reactions of alkynes were briefly introduced. After presenting the usefulness of green chemistry and mechanochemical reactions, mechanochemical and transition-metal-catalyzed reactions of alkynes were classified and demonstrated in detail. Based on different kinds of reactions of alkynes, mechanochemical and transition-metal-catalyzed coupling, cycloaddition and alkenylation reactions were summarized and the proposed reaction mechanisms were disclosed if available. Full article