Search Results (41)

Background: Minimally invasive hyperthermia and regenerative therapies require materials that deliver precise, localized heat without compromising biocompatibility. Most conventional polymers are thermally insulating and challenging to control in vivo, motivating this review. Objectives: We aimed to (i) examine the use of thermally enhanced biopolymers in hyperthermia-based therapies, (ii) appraise evidence from clinical and preclinical studies, (iii) identify and classify principal applications in regenerative medicine. Methods: A PRISMA-guided systematic review (2020–2025) with predefined inclusion/exclusion criteria was conducted and complemented by a bibliometric analysis using VOSviewer for mapping and visualization. Results: Modifying biopolymers—via functionalization with photothermal or magnetic nanoagents (Au; Fe₂O₃/Fe₃O₄/CoFe₂O₄; CuS; Ag; MXenes, e.g., Nb₂C), crosslinking strategies, and hybrid formulations—significantly increased thermal conductivity, enabling localized hyperthermia and controlled drug release. In vitro and in vivo studies showed that europium-doped iron oxide nanoparticles embedded in chitosan generated heat efficiently while sparing healthy tissues, underscoring the need to balance biocompatibility and thermal performance. Hydrogel systems enriched with carbon nanomaterials (graphene, carbon nanotubes) and matrices such as GelMA, PNIPAM, hyaluronic acid, and PLA/PLGA demonstrated tissue compatibility and effective thermal behavior; graphene was compatible with neural tissue without inducing inflammation. Conclusions: Thermally conductive biopolymers show growing potential for oncology and regenerative medicine. The evidence supports further academic and interdisciplinary research to optimize safety, performance, and translational pathways. Full article

High-Bandwidth Memory (HBM) enables the bandwidth required by modern AI and high-performance computing, yet its three dimensional stack traps heat and amplifies thermo mechanical stress. We first review how conventional solutions such as heat spreaders, microchannels, high density Through-Silicon Vias (TSVs), and Mass Reflow Molded Underfill (MR MUF) underfills lower but do not eliminate the internal thermal resistance that rises sharply beyond 12layer stacks. We then synthesize recent hybrid bonding studies, showing that an optimized Cu pad density, interface characteristic, and mechanical treatments can cut junction-to-junction thermal resistance by between 22.8% and 47%, raise vertical thermal conductivity by up to three times, and shrink the stack height by more than 15%. A meta-analysis identifies design thresholds such as at least 20% Cu coverage that balances heat flow, interfacial stress, and reliability. The review next traces the chain from Coefficient of Thermal Expansion (CTE) mismatch to Cu protrusion, delamination, and warpage and classifies mitigation strategies into (i) material selection including SiCN dielectrics, nano twinned Cu, and polymer composites, (ii) process technologies such as sub-200 °C plasma-activated bonding and Chemical Mechanical Polishing (CMP) anneal co-optimization, and (iii) the structural design, including staggered stack and filleted corners. Integrating these levers suppresses stress hotspots and extends fatigue life in more than 16layer stacks. Finally, we outline a research roadmap combining a multiscale simulation with high layer prototyping to co-optimize thermal, mechanical, and electrical metrics for next-generation 20-layer HBM. Full article

Two new Cu(II) (CP1) and Co(II) (CP2) coordination polymers (CPs) with the triazole ligand 5-methyl-1-(pyridin-4-yl-methyl)-1H-1,2,3-triazole-4-carboxylate (L1) have been synthesized and structurally characterized by SCXRD (Single Crystal X-Ray Difraccion), PXRD (Power X-Ray Difracction), FT-IR (Fourier Transform Infrared), TG (Theermo Gravimetric), and electrochemical techniques. Both CPs were obtained at the water/n-butanol interface by reacting nitrate salts of each metal with the NaL1 ligand. SCXRD analysis revealed that CP1 (Coordination Polymer 1) and CP2 (Coordination Polymer 2) crystallize in the monoclinic space groups C2/c (No. 15) and P2₁/n (No. 14), respectively, forming 1D zigzag chain structures, which further lead to a 2D supramolecular network through O-H⋯O and C-H⋯O hydrogen bond interactions, respectively. In CP1, the supramolecular structure is assembled by hydrogen bonds involving water molecules. In contrast, CP2 forms its supramolecular network mainly through hydrogen bonds between adjacent triazole ligand molecules. Hirshfeld surface analysis revealed that the most significant contributions to the crystal packing come from H⋯O/O⋯H, H⋯H, H⋯N/N⋯H, and H⋯C/C⋯H interactions. In addition, FT-IR provided information on the functional groups involved in the coordination, while the decomposition patterns of both CPs were evaluated by TGA. Electrochemical studies conducted in a saline environment showed that CP1 exhibits superior hydrogen evolution reaction (HER) kinetics compared to CP2, as evidenced by a higher exchange current density and a lower Tafel slope. Density functional theory calculations and experimental bandgap measurements provided a deeper understanding of the electronic properties influencing the electrochemical behavior. The results highlight the potential of CP1 as an efficient catalyst for HER under saline conditions. Full article

The oxime group is important in organic and inorganic chemistry. In most cases, this group is part of an organic molecule possessing one or more donor sites capable of forming bonds to metal ions. One family of such compounds is the group of 2-pyridyl (aldo)ketoximes. Metal complexes of 2-pyridyl oximes continue to attract the intense interest of many inorganic chemistry groups around the world for a variety of reasons, including their interesting structures, physical and biological properties, and applications. A unique member of 2-pyridyl ketoximes is di-2-pyridyl ketoxime (dpkoxH), which contains two 2-pyridyl groups and an oxime functionality that can be easily deprotonated giving the deprotonated ligand (dpkox⁻). The extra 2-pyridyl site confers a remarkable flexibility resulting in metal complexes with exciting structural and reactivity features. Our and other research groups have prepared and characterized many metal complexes of dpkoxH and dpkox⁻ over the past 30 years or so. This work is an attempt to build a “periodic table” of dpkoxH, which is near completion. The filled spaces of this “periodic table” contain metal ions whose dpkoxH/dpkox⁻ complexes have been structurally characterized. This work reviews comprehensively the to-date published coordination chemistry of dpkoxH with emphasis on the syntheses, reactivity, relationship to metallacrown chemistry, structures, and properties of the metal complexes; selected unpublished results from our group are also reported. The sixteen coordination modes adopted by dpkoxH and dpkox⁻ have provided access to monomeric and dimeric complexes, trinuclear, tetranuclear, pentanuclear, hexanuclear, heptanuclear, enneanuclear, and decanuclear clusters, as well as to a small number of 1D coordination polymers. With few exceptions ({M^IILn^III₂} and {Ni^II₂Mn^III₂}; M = Ni, Cu, Pd, and Ln = lanthanoid), most complexes are homometallic. The metals whose ions have yielded complexes with dpkoxH and dpkox⁻ are Cr, Mn, Fe, Co, Ni, Cu, Zn, Ru, Rh, Pd, Ag, Cd, Re, Os, Ir, Au, Hg, lanthanoids (mainly Pr and Nd), and U. Most metal complexes are homovalent, but some mixed-valence Mn, Fe, and Co compounds have been studied. Metal ion-assisted/promoted transformations of dpkoxH, i.e., reactivity patterns of the coordinated ligand, are also critically discussed. Some perspectives concerning the coordination chemistry of dpkoxH and research work for the future are outlined. Full article

The utilization of self-healing polymers is a promising way of solving problems associated with the wear and tear of polymer products, such as those caused by mechanical stress or environmental factors. In this study, a series of novel self-healing, high-strength copolymers of acrylamide, acrylic acid, and novel acrylic complexes of 4′-phenyl-2,2′:6′,2″-terpyridine [Co(II), Ni(II), and Cu(II)] was prepared. A systematic study of the composition and properties of the obtained polymers was carried out using a variety of physicochemical techniques (elemental analysis, gel permeation chromatography (GPC), attenuated total reflectance Fourier transform infrared spectroscopy (ATR/FT-IR), ultraviolet-visible spectroscopy (UV-vis), small-angle X-ray scattering (SAXS), wide-angle X-ray scattering (WAXS), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), dynamic mechanical analysis (DMA), confocal laser scanning microscopy (CLSM), and tensile testing). All metallopolymer samples exhibit autonomous intrinsic healing along with maintaining high tensile strength values (for some samples, the initial tensile strength exceeded 100 MPa). The best values of healing efficiency are possessed by metallopolymers with a nickel complex (up to 83%), which is most likely due to the highest lability of the metal–heteroatom coordination bonds. The example of this system shows the ability to re-heal with negligible deterioration of the mechanical properties. The possibility of tuning the mechanical properties of self-healing films through the use of different metal ions has been demonstrated. Full article

New flower-shaped metallophthalocyanine polymers (THB-4-M, M = Co, Cu) have been synthesized by using 1,3,5-Tri(4-hydroxyphenhyl) benzene (THB) as rigid and contorted units to control the morphology under the solvothermal method. The polymers were characterized using FT-IR, UV-vis, SEM, TGA, and XPS. These polymers were applied as heterogeneous catalysts for the chemical fixation of carbon dioxide (CO₂) to cyclic carbonates without solvent. The influence of reaction parameters and different metal centers on the catalytic performance were studied in detail. Under optimal conditions, the catalysts showed high conversion (49.9–99.0%), selectivity (over 85%), and reusability at ambient conditions (at 1 bar CO₂). Full article

The metal–radical approach is a well-established synthetic way toward multi-spin systems that relies on the coordination of stable radical ligands with transition metal ions. The advantage offered by the use of paramagnetic ligands is that metal–radical magnetic exchange coupling is direct between the magnetic orbitals of the radical and metal ion. With the aim of further exploring this approach, crystals of four heterspin complexes, [M(hfac)₂L^F]₂ {M = Mn, Co, or Ni and hfac = hexafluoroacetylacetonate} and [Cu(hfac)₂L^F]_n, were obtained using a new fluorinated pyrazolyl-substituted nitronyl nitroxide radical, 4,4,5,5-tetramethyl-2-(5-fluoro-1-methyl-1H-pyrazol-4-yl)-4,5-dihydro-1H-imidazole-3-oxide-1-oxyl (L^F) as a ligand. The newly synthesized complexes were fully characterized, including X-ray crystallography and magnetometry. XRD analysis revealed that complexes [M(hfac)₂L^F]₂ have similar dimer structures in which a metal ion is in a six-coordinated environment with four O atoms from the two hfac ligands, one radical O atom, and one pyrazole N atom from ligand L^F. Nonetheless, the packing patterns of the complexes were found to be considerably different. In [Mn(hfac)₂L^F]₂, there are no magnetically important short contacts between manganese dimers. By contrast, in [Co(hfac)₂L^F]₂ and [Ni(hfac)₂L^F]₂, there are short contacts between non-coordinate O atoms of nitronyl nitroxide moieties. Magnetic behaviors of [M(hfac)₂L^F]₂ showed that the M ions and the directly coordinated radicals are strongly antiferromagnetically coupled (J_Mn-ON = −84.1 ± 1.5 cm⁻¹, J_Co-ON = −134.3 ± 2.6 cm⁻¹, and J_Ni-ON = −276.2 ± 2.1 cm⁻¹; $\widehat{H}=-2J{\widehat{\stackrel{⃑}{S}}}_{\mathrm{M}}{\widehat{\stackrel{⃑}{S}}}_{\mathrm{N}\mathrm{O}}$). Notably, the magnetization of [Mn(hfac)₂L^F]₂ having molecular structure proved to be accompanied by hysteresis. The [Cu(hfac)₂L^F]_n complex has a chain-polymer structure with alternating magnetic fragments: three spin exchange clusters {O_NO–Cu(II)–O_NO} and {Cu(II)} ions. Despite the direct coordination of radicals, its magnetic properties are weakly ferromagnetic (J_Cu-ON = 14.8 ± 0.3 cm⁻¹). Full article

Three new products, [Cu₂(μ₃-dppa)(2,2′-bipy)₂(H₂O)]_n·2nH₂O (1), [Co₄(μ₄-dppa)₂(phen)₄(H₂O)₄]·2H₂O (2), and [Co₂(μ₆-dppa)(μ-4,4′-bipy)(H₂O)₂]_n·3nH₂O (3) were synthesized using a hydrothermal method from Cu(II) and Co(II) metal(II) chlorides, 3-(3,4-dicarboxyphenoxy)phthalic acid (H₄dppa), and different auxiliary ligands, namely 2,2′-bipyridine (2,2′-bipy),1,10-phenanthroline (phen), and 4,4′-bipyridine (4,4′-bipy). Products 1–3 were characterized by elemental analysis, FTIR, TGA, PXRD, SEM, and single-crystal X-ray crystallography. The structure of 1 features a 1D chain of the 2C1 topological type. Compound 2 shows a discrete tetrameric complex. Product 3 demonstrates a 3D metal–organic framework (MOF) with the new topology. Their structure and topology, thermal stability, and catalytic activity were studied. In particular, excellent catalytic activity was demonstrated for copper(II)-polymer 1 in the cyanosilylation reaction at 35 °C. Full article

Innovative materials and technologies capable of extraction and recovery of technologically relevant metal ions from various water sources, such as lakes, oceans, ponds, or wastewater reservoirs, are in great demand. Polymer beads are among the most well-known solid-phase adsorbents and ion exchangers employed in metal ion recovery. On the other hand, hydrogels are an emerging platform for producing innovative adsorbents, which are environmentally friendly and biocompatible materials. In this work, we take advantage of both technologies and produce a new type of material by loading nanostructured polymer microsphere adsorbent into a PVA matrix to obtain a hydrogel polymer microsphere (HPM) composite in the form of a block. The main role of the poly(4-vinylpyrridine-co-methacrylic acid) microspheres is to adsorb metal ions, such as Cu(II), from model water samples. The secondary role of these microspheres in the hydrogel is to change the hydrogel morphology by softening it and stabilizing it under a foam-like morphology. The foam-like morphology endows these composites with the capability of floating on water surfaces. In this work, we report, for the first time, an HPM composite capable of floating on water surfaces and extracting Cu(II) ions from model water samples. This could enable more environmentally friendly hydrological mining technologies by simply deploying adsorbents on water surfaces for metal ion extraction and recovery, thus eliminating the need for water pumping and mechanical processing steps. Full article

Today, the high concentrations of copper found in water resources result in an urgent problem to solve since human health and aquatic ecosystems have been affected. Functionalized crosslinked polyketone resins (XLPK) have demonstrated high performance for the uptake of heavy metals in water solutions. In addition, its green chemical synthesis makes these resins very attractive as sorbents for metal ions contained in wastewater. XLPK are not soluble in aqueous media and do not require any catalyst, solvent, or harsh conditions to carry out the uptake process. In this paper, a series of functionalized XLPK with pending amino-derivatives namely; butylamine (BA), amino 2-propanol (A2P), 4-(aminomethyl) benzoic acid (HAMC), 6-aminohexanoic acid (PAMBA), and 1,2 diamino propane (DAP) directly attached to the pyrrole backbone of the polymers and crosslinked by di-amine derivatives was investigated using Density Functional Theory (DFT) calculations. Our computational analysis revealed that dipole-dipole interactions played a crucial role in enhancing the adsorption of Cu²⁺ ions onto XLPKs. The negatively charged ketone moieties and functional groups within XLPKs were identified as key adsorption sites for the selective binding of Cu²⁺ ions. Additionally, we found that XLPKs exhibited strong electrostatic interactions primarily through the –NH₂ and –C=O groups. Evaluation of the adsorption energies in XLPK-Cu(II) complexes showed that the DAP-Cu(II) complex exhibited the highest stability, attributed to strong Cu(II)-N binding facilitated by the amino moiety (–NH₂). The remaining XLPKs displayed binding modes involving oxygen atoms (Cu(II)-O) within the ketone moieties in the polymer backbone. Furthermore, the complexation and thermochemical analysis emphasized the role of the coordinator atom (N or O) and the coordinating environment, in which higher entropic effects involved in the adsorption of Cu²⁺ ions onto XLPKs describes a lower spontaneity of the adsorption process. The adsorption reactions were favored at lower temperatures and higher pressures. These findings provide valuable insights into the reactivity and adsorption mechanisms of functionalized and crosslinked polyketones for Cu²⁺ uptake, facilitating the design of high-performance polymeric resins for water treatment applications. Full article

This article presents a study on the synthesis and catalytic properties of copper complex (TPhTz)₂[CuBr₄] (here TPhTz is 2,3,5-triphenyltetrazolium). The obtained complex was characterized by various spectroscopic methods. The catalytic properties of the complex were evaluated in the curing of an epoxy vinyl ester system and their effectiveness was compared with that of cobalt octoate (its synonyms are known as Co(Oct)₂, cobalt(II) 2-ethylhexanoate, cobalt isocaprylate, etc.). The catalyst was added at an amount of 2 w.%. The results showed that a 8 w.% solution of the complex provides catalytic properties with an activation energy of 54.7 kJ/mol, which is 25.2 kJ/mol higher than a standard curing system with Co(Oct)₂. Thus, the solution of (TPhTz)₂[CuBr₄] in THF/DMSO accelerates the initiator decay process at room temperature, but for a longer time. The authors suggest that the curing mechanism may be accelerated by the appearance of (TPhTz)₂[Cu^IBr₃] and free bromine in the system. A strength test of fiberglass-reinforced plastic revealed that the addition of this complex did not lead to a decrease in flexural strength and hardness. Thus, use of the complex allowed for the production of polymer composite products using vacuum-assisted resin transfer molding where an extended injection time was needed. Full article

Bisphenol A (BPA) is an endocrine-disrupting chemical (EDC) that can cause adverse effects on human health. The incorporation of materials as visible light photocatalysts and its energy storage capability allow for the photodegradation of BPA, especially in the absence of a light source. To date, there have been no significant studies regarding energy storage in membrane technology, with only a focus on the suspension form. Hence, this study was conducted to degrade the pollutant through a co-extrusion process using a mixture of copper (II) oxide and tungsten oxide as the photocatalyst and energy storage materials, respectively. Both materials were embedded into polyvinylidene (PVDF) membranes to produce a Cu₂O/WO₃/PVDF dual-layer hollow fiber (DLHF) membrane. The outer dope extrusion flow rate was set at 3 mL/min, 6 mL/min, and 9 mL/min with photocatalyst:polymer ratios of 0.3, 0.50, and 0.7 Cu₂O/WO₃/PVDF, respectively. The performance of the membranes for each ratio was evaluated using 2 ppm of BPA with visible light irradiation. The results showed that each membrane’s outer and inner layers featured finger-like void structures, while the intermediate part had a sponge-like structure. The membrane with the photocatalyst:polymer ratio of 0.5 was hydrophilic and had a high porosity of 54.97%, resulting in a high flow of 510 L/m²h. Under visible light irradiation, a 0.5 Cu₂O/PVDF DLHF membrane with a 6-mL/min outer dope flow rate was able to remove 97.82% of 2-ppm BPA without copper leaching into the water sample. Under dark conditions, the DLHF sample showed the capability of energy storage performance and could drive certain degradation after lighting off up to 70.73% of 2-ppm BPA. The photocatalytic DLHF membrane with the ratio of 0.5 was the most optimal due to its potential morphology and ability to degrade a large amount of BPA. It is important to emphasize that usage of materials with the capability for energy storage can provide a significant contribution toward more practical membranes, so photodegradation can occur even in dark conditions. Full article

Eight polymer-metal complexes were synthesized from complexation of divalent Mn(II), Ni(II), Co(II), and Cu(II) metal ions with modified polystyrene-alt-(maleic anhydride) (PSMAP and PSMAM) ligands. The structures of these new complexes were characterized using a variety of techniques, including magnetic moment susceptibility, conductance measurements, FT-IR spectroscopy, ultraviolet-visible (UV-VIS), thermogravimetric analysis (TGA), as well as scanning electron microscopy (SEM). All metal-polymer complexes have a non-electrolytic nature based on conductance measurements. The polymer molecule behaves as neutral bidentate NO ligand through O atoms of carbonyl (C=O) and N atoms of amide (O=C-NH). Divalent Mn²⁺, Ni²⁺, Co²⁺ and Cu²⁺ complexes have an octahedral geometry based on their electronic spectra and magnetic values. Based on thermal analysis data, those new complexes are more thermally stable than the ligands. SEM and TEM are manipulated to give the surface structure and the particle size measurements where they give different shapes and sizes of the synthesized complexes. Full article

Four new Ni^II, Co^II, Zn^II, and Cu^II complexes with the promising anti-tuberculosis drug (E/Z)-N′-((5-Hydroxy-3,4-bis(hydroxymethyl)-6-methylpyridin-2-yl)methylene)-isonicotino-hydrazide (LH) were synthesized and characterized by structural methods: single-crystal X-ray diffraction, vibrational spectroscopy, and mass spectrometry. The Ni^II, Co^II, and Zn^II metal ions form only amorphous phases with various morphologies according to mass spectrometry and IR spectroscopy. The Cu^II forms a crystalline 1D coordination polymer with the relative formula $\left\{\left[\mathrm{Cu}L\mathrm{Cl}\right]·0.5{\mathrm{H}}_2\mathrm{O}\right\}_{\infty }^1$. Even though the LH ligand in the crystalline state includes a mixture of E-/Z-isomers, only the tautomeric iminol E-/Z-form is coordinated by Cu^II in the crystal. The copper(II) complex crystallizes in the monoclinic P2₁/n space group with the corresponding cell parameters a = 16.3539(11) Å, b = 12.2647(6) Å, and c = 17.4916(10) Å; α = 90°, β = 108.431(7)°, and γ = 90°. DFT calculations showed that the Z-isomer of the LH ligand in solution has the lowest formation energy due to intramolecular hydrogen bonds. According to the quantum chemical calculations, the coordination environment of the Cu^II atom during the transfer of the molecule into the solution remains the same as in the crystal, except for the polymeric bond, namely, distorted trigonal bipyramidal. Some of the complexes investigated can be used as effective sensors in biosystems. Full article

The novel [Cuphen(VBA)₂H₂O] complex (phen: phenanthroline, VBA: vinylbenzoate) was prepared and used as a functional monomer to preorganize a new ion-imprinted polymer (IIP). By leaching the Cu(II) from the molecular imprinted polymer (MIP), [Cuphen(VBA)₂H₂O-co-EGDMA]_n (EGDMA: ethylene glycol dimethacrylate), the IIP was obtained. A non-ion-imprinted polymer (NIIP) was also prepared. The crystal structure of the complex and some physicochemical, spectrophotometric techniques were also used for the MIP, IIP, and NIIP characterization. The results showed that the materials are nonsoluble in water and polar solvents, which are the main features of polymers. The surface area of the IIP is higher than the NIIP demonstrated by the blue methylene method. The SEM images show monoliths and particles smoothly packed together on spherical and prismatic-spherical surfaces in the morphology of MIP and IIP, respectively. Moreover, the MIP and IIP could be considered as mesoporous and microporous materials, shown by the size of the pores determined by the BET and BJH methods. Furthermore, the adsorption performance of the IIP was studied using copper(II) as a contaminant heavy metal. The maximum adsorption capacity of IIP was 287.45 mg/g at 1600 mg/L Cu²⁺ ions with 0.1 g of IIP at room temperature. The Freundlich model was found to best describe the equilibrium isotherm of the adsorption process. The competitive results indicate that the stability of the Cu-IIP complex is higher than the Ni-IIP complex with a selectivity coefficient of 1.61. Full article