Reviewer Board
Members of the reviewer board are selected from all Metals reviewers for regularly providing timely high quality reports on submitted manuscripts. Responsibilities of reviewers are available here.
Members
Mechanical Engineering Department, Faculdade de Engenharia, University of Porto, Porto 4099-002, Portugal
Interests: electrical discharge machining; materials; Optimization
Interests: electrical discharge machining; materials; Optimization
Machine Design and Production Engineering Lab, Research Institute for Science and Material Engineering, University of Mons, Place du Parc 20, 7000 Mons, Belgium
Interests: manufacturing; finite element; engineering; virtual manufacturing; Ti6Al4V; composite; additive manufacturing
Interests: manufacturing; finite element; engineering; virtual manufacturing; Ti6Al4V; composite; additive manufacturing
Institut de Recherche Expérimentale et Clinique (IREC), Université Catholique de Louvain, 1348 Ottignies-Louvain-la-Neuve, Belgium
Interests: biomaterials; tissue engineering; surgery; regenerative medicine; anatomy scaffolds; biomimetic materials
Interests: biomaterials; tissue engineering; surgery; regenerative medicine; anatomy scaffolds; biomimetic materials
Faculty of Mechanical Engineering, Department of Foundry Engineering, Silesian University of Technology, 44-100 Gliwice, Poland
Interests: layered castings; metal matrix composites; mechanical properties; cast iron; cast steel; crystallization process; diffusion
Interests: layered castings; metal matrix composites; mechanical properties; cast iron; cast steel; crystallization process; diffusion
Department of Mechanical Engineering, Faculty of Mechanical Engineering and Design, Kaunas University of Technology, Studentu str. 56, LT-51424 Kaunas, Lithuania
Interests: fracture mechanics; Low Cycle Fatigue; static and dynamic analysis of building and equipment; deterministic-probabilistic structural integrity analysis
Interests: fracture mechanics; Low Cycle Fatigue; static and dynamic analysis of building and equipment; deterministic-probabilistic structural integrity analysis
Technical University of Kosice
Faculty of Manufacturing Technologies with a seat in Presov
Bayerova 1
080 01 Presov
Slovakia
Interests: manufacturing; simulation; ergonomics; scheduling
Interests: manufacturing; simulation; ergonomics; scheduling
Department of Materials Technology, Faculty of Advanced Technologies & Chemistry, Military University of Technology, 00-908 Warsaw, Poland
Interests: additive manufacturing; metals and alloys; relationship between structure and structural and functional properties of metals and alloys; functional graded materials and composites; powder metallurgy; CNC machining
Interests: additive manufacturing; metals and alloys; relationship between structure and structural and functional properties of metals and alloys; functional graded materials and composites; powder metallurgy; CNC machining
Institut Jean Lamour, UMR 7198 Université de Lorraine/CNRS, Campus Artem, 2 allée André Guinier–BP 50840, Labex Damas, CEDEX, F-54011 Nancy, France
Interests: numerical modeling and simulation; metals; Computational Fluid Dynamics; CFD Simulation; Computational Fluid Mechanics; FLUENT; mathematical modelling; remelting processes; Electroslag Remelting (ESR); solidification; var; ESR
Interests: numerical modeling and simulation; metals; Computational Fluid Dynamics; CFD Simulation; Computational Fluid Mechanics; FLUENT; mathematical modelling; remelting processes; Electroslag Remelting (ESR); solidification; var; ESR
University of California, Los Angeles, CA, USA.
Interests: electrochemistry; material science; neurochemical sensing; boron doped diamond; biosensing; chemical sensors; electrochemical impedance spectroscopy; raman spectroscopy; X-ray photoelectro spectroscopy; microfabrication; corrosion; SOFC; gassensor
Interests: electrochemistry; material science; neurochemical sensing; boron doped diamond; biosensing; chemical sensors; electrochemical impedance spectroscopy; raman spectroscopy; X-ray photoelectro spectroscopy; microfabrication; corrosion; SOFC; gassensor
Department of Marine Maintenance, Faculty of Marine Engineering, Gdynia Maritime University, 81-225 Gdynia, Poland
Interests: mechanical and materials engineering; production engineering; plastic working; machining; burnishing
Interests: mechanical and materials engineering; production engineering; plastic working; machining; burnishing
RWTH Aachen University
Department for Industrial Furnaces and Heat Engineering
Kopernikusstr. 10
52074 Aachen
Germany
Interests: steelmaking; process modelling; electric arc furnace; industrial furnace; process analysis and optimization
Interests: steelmaking; process modelling; electric arc furnace; industrial furnace; process analysis and optimization
GKN Composites Technology Centre, Bristol BS34 9AU, UK
Interests: welding, casting, AM and machining of Aluminium and Titanium alloys; manufacturing of aero-structures; Mechanical Testing; Heat treatment optimisation; Residual stresses and (FEM-based) distortion modeling; Certification of large structure’s (detailed testing), impact of defects on performance; Digital twin: part footprint through the whole process lifetime
Interests: welding, casting, AM and machining of Aluminium and Titanium alloys; manufacturing of aero-structures; Mechanical Testing; Heat treatment optimisation; Residual stresses and (FEM-based) distortion modeling; Certification of large structure’s (detailed testing), impact of defects on performance; Digital twin: part footprint through the whole process lifetime
Institute of Strength Physics and Materials Science of Siberian Branch of Russian Academy of Sciences (ISPMS SB RAS), Tomsk, Russian Federation
Interests: friction stir welding; fusion welding; microstructure; friction drilling; friction; wear
Interests: friction stir welding; fusion welding; microstructure; friction drilling; friction; wear
Department of Chemical Engineering, Université Laval, Québec, QC G1V 0A6, Canada
Interests: hydrometallurgy; rare earth elements; mineral processing; mineral carbonation; mining and environment
Interests: hydrometallurgy; rare earth elements; mineral processing; mineral carbonation; mining and environment
Institute of Materials Science, Joining and Forming, Graz University of Technology, Kopernikusgasse 24, 8010 Graz, Austria
Interests: welding; materials; failure case analysis
Interests: welding; materials; failure case analysis
South Ural State University, 76, Lenin avenue, 454080 Chelyabinsk, Russia
Interests: Foundry, metal forming, digital technologies, metallurgy, mechanical engineering
Interests: Foundry, metal forming, digital technologies, metallurgy, mechanical engineering
Department of Automotive Production, Faculty of Mechanical Engineering, Technical University of Košice, Mäsiarska 74, 040 01 Košice, Slovakia
Interests: predictions of technological formability of steel sheets with higher strength properties; testing of material properties of steel sheets; automation of TPV engineering activities; numerical simulation of technological processes of pressing; optimization of technological processes; research of tribological conditions in pressing processes; evaluation of the technical and economic level of engineering productions and products; laboratory accreditation
Interests: predictions of technological formability of steel sheets with higher strength properties; testing of material properties of steel sheets; automation of TPV engineering activities; numerical simulation of technological processes of pressing; optimization of technological processes; research of tribological conditions in pressing processes; evaluation of the technical and economic level of engineering productions and products; laboratory accreditation
Polytechnic University of Bari
Interests: logistic; simulation; waste management; ergonomy
Interests: logistic; simulation; waste management; ergonomy
Department of Economy, Engineering, Society and Business; University of Tuscia, 01100 Viterbo, Italy
Interests: FEM; additive manufacturing; lattice materials; metamaterials; composites
Interests: FEM; additive manufacturing; lattice materials; metamaterials; composites
CanmetMATERIALS, Natural Resources, Hamilton, ON L8P 0AS, Canada
Interests: steel; Microstructure; phase transformations; Thermomechanical Processing; physical simulation; mechanical properties; aluminum alloys
Interests: steel; Microstructure; phase transformations; Thermomechanical Processing; physical simulation; mechanical properties; aluminum alloys
State Key Laboratory of Metastable Materials Science and Technology , Yanshan University, Qinhuangdao 066004, China
Interests: Amorphous Alloys; deformation; shear band; Molecular dynamics simulation
Interests: Amorphous Alloys; deformation; shear band; Molecular dynamics simulation
Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, GA 30332, USA
Interests: mechanical properties; finite element analysis; Microstructure
Interests: mechanical properties; finite element analysis; Microstructure
Department of Mechanical Engineering and Industrial Design, School of Engineering, University of Cádiz, 11130 Cádiz, Spain
Interests: mechanical engineering; conventional and non-conventional machining; Tool Wear; machining tribology
Interests: mechanical engineering; conventional and non-conventional machining; Tool Wear; machining tribology
Département de Génie Mécanique, École de Technologie Supérieure, 1100, rue Notre-Dame Ouest, Montréal, QC H3C 1K3, Canada
Interests: welding; Stainless Steel; robotic welding; advanced high strength steels; Heat Treatment; Microstructure
Interests: welding; Stainless Steel; robotic welding; advanced high strength steels; Heat Treatment; Microstructure
CEA, Service de la Corrosion et du Comportement des Matériaux dans leur Environnement, Université Paris‐Saclay,Gif‐sur‐Yvette 91190, France
Interests: corrosion; simulation; HCl; mateirals
Interests: corrosion; simulation; HCl; mateirals
Materials Science Division, Department of Engineering and Mathematics, Luleå University of Technology, SE-97187 Luleå, Sweden
Interests: steel; thermomechanical treatments; Microstructure; mechanical properties; quenching and partitioning; carbide free bainite; additive manufacturing of stainless steel
Interests: steel; thermomechanical treatments; Microstructure; mechanical properties; quenching and partitioning; carbide free bainite; additive manufacturing of stainless steel
The University of Tokyo
Interests: mineral processing; chemical engineering; environmental treatment; nanomaterials; colloid; recycling
Interests: mineral processing; chemical engineering; environmental treatment; nanomaterials; colloid; recycling
Division of Welding Engineering, Faculty of Mechanical Engineering and Ship Technology, Gdańsk University of Technology, G. Narutowicza 11/12, 80-233 Gdańsk, Poland
Interests: underwater welding; fusion welding; solid state welding; Brazing; thermal spraying; Hydrogen Embrittlement; cold cracking; high strength steel; Stainless Steel; coatings
Interests: underwater welding; fusion welding; solid state welding; Brazing; thermal spraying; Hydrogen Embrittlement; cold cracking; high strength steel; Stainless Steel; coatings
Faculty of Mechatronics and Mechanical Engineering, Kielce University of Technology, Aleja Tysiaclecia Panstwa Polskiego 7, 25-314 Kielce, Poland
Interests: fracture mechanics; machine design; fatigue; finite element method
Interests: fracture mechanics; machine design; fatigue; finite element method
1. ISEL, Department of Mechanical Engineering, Polytechnic Institute of Lisbon, Rua Conselheiro Emídio Navarro, 1959-007 Lisboa, Portugal
2. CEMMPRE, Department of Mechanical Engineering, University of Coimbra, Rua Luís Reis Santos, 3030-788 Coimbra, Portugal
Interests: solid-state welding; friction stir welding; explosion welding; dissimilar materials welding; solid-state processing
2. CEMMPRE, Department of Mechanical Engineering, University of Coimbra, Rua Luís Reis Santos, 3030-788 Coimbra, Portugal
Interests: solid-state welding; friction stir welding; explosion welding; dissimilar materials welding; solid-state processing
