Reviewer Board
Members of the reviewer board are selected from all Metals reviewers for regularly providing timely high quality reports on submitted manuscripts. Responsibilities of reviewers are available here.
Members
1. Industrial Machines and Equipment Department, Faculty of Engineering, Lucian Blaga University of Sibiu, Sibiu 550024, Romania; Mechanical Engineering Section, Technical Sciences Academy of Romania, Sibiu 550024, Romania
2. Research Centre for Metal Forming, Lucian Blaga University of Sibiu, Sibiu 550024, Romania
Interests: metal forming; incremental forming; history of technics
2. Research Centre for Metal Forming, Lucian Blaga University of Sibiu, Sibiu 550024, Romania
Interests: metal forming; incremental forming; history of technics
School of Engineering, University of Waikato, Private Bag 3105, Hamilton 3240, New Zealand
Interests: near-net-shape manufacturing; Powder Metallurgy; casting; light metals; High Entropy Alloys; processing-microstructure-properties relationships; functionalised materials; additive manufacturing
Interests: near-net-shape manufacturing; Powder Metallurgy; casting; light metals; High Entropy Alloys; processing-microstructure-properties relationships; functionalised materials; additive manufacturing
Faculty of Natural Sciences and Engineering, University of Ljubljana, Askerceva 12, 1000 Ljubljana, Slovenia
Interests: recrystallization; steel; hydrogen embrittlement; alloy design; hot deformation
Interests: recrystallization; steel; hydrogen embrittlement; alloy design; hot deformation
Department of Engineering Materials and Biomaterials, Faculty of Mechanical Engineering, Silesian University of Technology, 44-100 Gliwice, Poland
Interests: materials science; heat treatment; thermomechanical treatment; plastic deformation; hot rolling; phase transformations; physical simulation; gleeble simulations; advanced high-strength steels (AHSS); high-manganese steels; trip steels; twip steels; TRIPLEX steels; high-strength low-alloyed steels (HSLA); stainless steels; light metal alloys
Interests: materials science; heat treatment; thermomechanical treatment; plastic deformation; hot rolling; phase transformations; physical simulation; gleeble simulations; advanced high-strength steels (AHSS); high-manganese steels; trip steels; twip steels; TRIPLEX steels; high-strength low-alloyed steels (HSLA); stainless steels; light metal alloys
Ariel University, Science Park Ariel, Israel
Interests: surfaces; coatings; plasma electrolytic oxidation; nano composite; Mg alloys; Al alloys; solid oxide fuel cells
Interests: surfaces; coatings; plasma electrolytic oxidation; nano composite; Mg alloys; Al alloys; solid oxide fuel cells
College of Dentistry, The Ohio State University, 3005L Postle Hall, 305 W. 12th Ave., Columbus, OH 43210, USA
Interests: structure-property relationships for high-palladium dental alloys; hydroxyapatite-coated titanium dental implants; orthodontic materials; thermal analysis of elastomeric dental materials; biological properties of dental materials; applications of materials science principles to the study of biomaterials; nickel-titanium alloys for orthodontics and endodontics; new biomedical titanium alloys; laser sintering and laser deposition of metallic dental materials; metal-ceramic bonding for dental applications
Interests: structure-property relationships for high-palladium dental alloys; hydroxyapatite-coated titanium dental implants; orthodontic materials; thermal analysis of elastomeric dental materials; biological properties of dental materials; applications of materials science principles to the study of biomaterials; nickel-titanium alloys for orthodontics and endodontics; new biomedical titanium alloys; laser sintering and laser deposition of metallic dental materials; metal-ceramic bonding for dental applications
Department of Materials Science and Physical Metallurgy, Polytechnic University of Bucharest, București 060042 Romania
Interests: microstructure; material characterization; materials; advanced materials; materials testing; materials processing; metals; material characteristics
Interests: microstructure; material characterization; materials; advanced materials; materials testing; materials processing; metals; material characteristics
Department of Engineering Mechanics, Faculty of Engineering, University of Rijeka, Vukovarska 58, HR-51000 Rijeka, Croatia
Interests: numerical and experimental analysis; finite element method; carbon nanotubes; nanocomposites; fused filament fabrication; material characterization and properties; fatigue; engineering
Interests: numerical and experimental analysis; finite element method; carbon nanotubes; nanocomposites; fused filament fabrication; material characterization and properties; fatigue; engineering
Oak Ridge National Laboratory, Oak Ridge, TN 37830, USA
Interests: bulk metallic glasses; high entropy alloys; irradiation effects; serrated flow; nanoindentation; mathematical analysis; X-ray diffraction
Interests: bulk metallic glasses; high entropy alloys; irradiation effects; serrated flow; nanoindentation; mathematical analysis; X-ray diffraction
Mechanical Design and Manufacturing, Brandenburg University of Technology Cottbus - Senftenberg, Konrad - Wachsmann - Allee 17, Cottbus D-03046, Germany
Interests: hot stamping; simulation and optimization
Interests: hot stamping; simulation and optimization
Department of Mechanical Engineering, Barcelona School of Engineering (ETSEIB), Universitat Politècnica de Catalunya, Avda. Diagonal 647, 08028 Barcelona, Spain
Interests: roughness; fused deposition modeling; honing; milling
Interests: roughness; fused deposition modeling; honing; milling
Research and Development at Eloxalwerk Ludwigsburg GmbH, DE-71642 Ludwigsburg, Germany
Interests: lightweight metals; surfaces; tribology; corrosion; wear protection; coatings; microstructure; oxide layers
Interests: lightweight metals; surfaces; tribology; corrosion; wear protection; coatings; microstructure; oxide layers
Technical University of Kosice, Faculty of Metallurgy, Kosice, Slovakia
Interests: physical modelling and simulation of flow processes; lime utilization in metallurgy including testing of its properties; continuous casting; research of high temperature stability of quartzite; high temperature laboratory experiments; hydrogen utilization in metallurgy; optimization of properties of metallurgical slag; secondary steelmaking processes
Interests: physical modelling and simulation of flow processes; lime utilization in metallurgy including testing of its properties; continuous casting; research of high temperature stability of quartzite; high temperature laboratory experiments; hydrogen utilization in metallurgy; optimization of properties of metallurgical slag; secondary steelmaking processes
Łukasiewicz Research Network - Institute of Non-Ferrous Metals, Gliwice Sowinskiego 5, 44-100, Poland
Interests: phase transformations; precipitation processes; thermodynamics calculations; Cu base alloys; additive manufacturing; nanocrystalline alloys; bainite steel; bainitic transformations; martensite; austenite; maraging steel; terminal ballistics
Interests: phase transformations; precipitation processes; thermodynamics calculations; Cu base alloys; additive manufacturing; nanocrystalline alloys; bainite steel; bainitic transformations; martensite; austenite; maraging steel; terminal ballistics
Institute of Manufacturing Technologies, Warsaw University of Technology, Narbutta 85 str., 02-524 Warsaw, Poland
Interests: metal forming; mechanical joining; Self-piercing riveting; micro-forming; numerical modeling in metal forming design; finite element method (FEM)
Interests: metal forming; mechanical joining; Self-piercing riveting; micro-forming; numerical modeling in metal forming design; finite element method (FEM)
Department of Civil Engineering, Polythecnic School, University of Burgos, 09001 Burgos, Spain
Interests: metals characterization; mechanical behaviour of materials; thermal treatments; cryogenic treatments; magnesium alloys
Interests: metals characterization; mechanical behaviour of materials; thermal treatments; cryogenic treatments; magnesium alloys
Department of Materials Science & Engineering, Texas A&M University, College Station, TX 77843, USA
Interests: Corrosion Science; materials science; corrosion and protection; steels; modeling
Interests: Corrosion Science; materials science; corrosion and protection; steels; modeling
Department of Mechanical Engineering, Villanova University, 800 Lancaster Ave, Villanova, PA 19085, USA
Interests: computational mechanics; multiscale modeling of materials; machine learning; materials genome initiative; Materials under extreme conditions; nuclear fusion materials
Interests: computational mechanics; multiscale modeling of materials; machine learning; materials genome initiative; Materials under extreme conditions; nuclear fusion materials
Department of Earth Sciences, University of New Brunswick, Fredericton, NB E3B 5A3, Canada
Interests: hot deformation; forging; open die forging
Interests: hot deformation; forging; open die forging
Department of Nuclear Engineering, Kyung Hee University, Yongin-City 17104, Korea
Interests: nuclear materials; phase-field modeling; radiation damage
Interests: nuclear materials; phase-field modeling; radiation damage
Nuclear Fuels and Materials Division, Institute of Nuclear Energy Research, Taoyuan 32546, Taiwan
Interests: stress corrosion cracking; hydrogen embrittlement; failure analysis; thermal spray; electron backscatter diffraction; corrosion; wear; steel; heat treatment; welding
Interests: stress corrosion cracking; hydrogen embrittlement; failure analysis; thermal spray; electron backscatter diffraction; corrosion; wear; steel; heat treatment; welding
State key lab of metal matrix composites, Shanghai JiaoTong University, Shanghai 200240, China
Interests: metal matrix composites; 3D printing; crystallography; residual stress; functional materials; materials characterization based on synchrotron/neutron scattering/diffraction technique
Interests: metal matrix composites; 3D printing; crystallography; residual stress; functional materials; materials characterization based on synchrotron/neutron scattering/diffraction technique
Department of Industrial Engineering and Management Systems, “Vasile Alecsandri” University of Bacau, Calea Marasesti 157, 600115 Bacau, Romania
Interests: machining; materials processing; process optimization; surface quality; residual stress; mechanical properties; metal forming; sustainable manufacturing
Interests: machining; materials processing; process optimization; surface quality; residual stress; mechanical properties; metal forming; sustainable manufacturing
Department of Materials Science and Engineering, Kookmin University, Seoul 02707, Republic of Korea
Interests: secondary hardening martensitic steels; structural material design; machine learning; Physical metallurgy; phase transformation; microstructure characteristics; Powder Metallurgy; ultrahigh strength steels; precipitation kinetics; fracture behavior
Interests: secondary hardening martensitic steels; structural material design; machine learning; Physical metallurgy; phase transformation; microstructure characteristics; Powder Metallurgy; ultrahigh strength steels; precipitation kinetics; fracture behavior
Departamentul de Construcţii Metalice, Universitatea Politehnica din Timisoara, 300006 Timisoa, Romania
Interests: steel structures; composite steel and concrete structures; seismic behaviour of steel and composite structures; steel/composite connections
Interests: steel structures; composite steel and concrete structures; seismic behaviour of steel and composite structures; steel/composite connections
ESTG, Departamento de Engenharia Mecânica, Instituto Politécnico de Leiria, 2411-901 Leiria, Portugal
Interests: contact fatigue; X-ray diffraction; Residual Stresses; gearbox; additive manufacturing; nitriding
Interests: contact fatigue; X-ray diffraction; Residual Stresses; gearbox; additive manufacturing; nitriding
Department of Engineering and Architecture, University of Parma, V.le delle Scienze 181/A, 43124 Parma, Italy
Interests: fatigue and fracture; mechanical behaviour of materials; NDT techniques
Interests: fatigue and fracture; mechanical behaviour of materials; NDT techniques
Politecnico di Milano, Department of Mechanical Engineering, Via La Masa 1, I-20154 Milan, Italy
Interests: internal damping modeling; creep and creep fatigue crack growth; machine design
Interests: internal damping modeling; creep and creep fatigue crack growth; machine design
Politecnico di Bari
Interests: additive manufacturing; selective laser melting; direct laser metal deposition; laser; friction stir welding; laser cladding; laser ablation
Interests: additive manufacturing; selective laser melting; direct laser metal deposition; laser; friction stir welding; laser cladding; laser ablation
Department of Materials, Faculty of Mechanical Engineering and Naval Architecture, University of Zagreb, Ivana Lučića 1,10000 Zagreb, Croatia
Interests: shape memory alloys; smart materials; surface coatings; mechanical properties of materials; powder metallurgy; titanium alloys; cemented carbides
Interests: shape memory alloys; smart materials; surface coatings; mechanical properties of materials; powder metallurgy; titanium alloys; cemented carbides
