Supplementary Cementitious Materials in Concrete - Part II

Dear Colleagues,

In May 2019, we launched a Special Issue of Materials titled “Supplementary Cementitious Materials (SCM) in Concrete”, which resulted in growing interest in the use of SCM in cement matrix composites. Since then, various research papers and state-of-the art reviews have been published, covering the aspects of design, application and testing of different types of supplementary cementitious materials in concrete. Due to the continued interest in this topic, we decided to close this Special Issue with 20 published articles, and to initiate a second part.

The aim of the new Special Issue is to collect the latest research findings and advances in the field of SCMs, including material properties and application in cement-based composites. Particular attention will be devoted to the reduction of CO₂ and NO_x emissions, by recycling waste materials and by increasing the durability of cement-based composites made with SCMs.

It is our expectation that part II of the Special Issue on SCM will prove to be an interesting input, with many aspects related to concrete and cementitious matrix composites. Thus, we kindly invite the readers of Materials to submit original research manuscript(s). Full papers, communications, discussions and state-of-the art reviews are welcome.

The following aspects of supplementary cementitious materials are considered:

• Properties of various SCMs;
• SCMs pre-treatment methods for use in cement and concrete;
• Blended cements;
• Compatibility of SCMs with chemical admixtures;
• Alternative application of SCMs;
• Effects of the high volume of SCMs on the performances of fresh mix and hardened concrete;
• Designing structural elements made with normal and high-performance concretes containing SCMs;
• Durability and the environmental impact of cement-based materials and structures, when SCMs are used as additives or in blended cement.

Yours sincerely,

Dr. Daria Jóźwiak-Niedźwiedzka
Prof. Dr. Alessandro P. Fantilli
Guest Editors

Manuscript Submission Information

Manuscripts should be submitted online at www.mdpi.com by registering and logging in to this website. Once you are registered, click here to go to the submission form. Manuscripts can be submitted until the deadline. All submissions that pass pre-check are peer-reviewed. Accepted papers will be published continuously in the journal (as soon as accepted) and will be listed together on the special issue website. Research articles, review articles as well as short communications are invited. For planned papers, a title and short abstract (about 250 words) can be sent to the Editorial Office for assessment.

Submitted manuscripts should not have been published previously, nor be under consideration for publication elsewhere (except conference proceedings papers). All manuscripts are thoroughly refereed through a single-blind peer-review process. A guide for authors and other relevant information for submission of manuscripts is available on the Instructions for Authors page. Materials is an international peer-reviewed open access semimonthly journal published by MDPI.

Please visit the Instructions for Authors page before submitting a manuscript. The Article Processing Charge (APC) for publication in this open access journal is 2600 CHF (Swiss Francs). Submitted papers should be well formatted and use good English. Authors may use MDPI's English editing service prior to publication or during author revisions.