Skip to Content
You are currently on the new version of our website. Access the old version .
WindWind
  • Article
  • Open Access

27 October 2022

32 Pages

Wind Resource Assessment in Building Environment: Benchmarking of Numerical Approaches and Validation with Wind Tunnel Data

,
,
,
,
and
1
National Laboratory for Energy and Geology (LNEG), 2610-999 Lisbon, Portugal
2
Instituto de Mecánica de los Fluidos e Ingeniería Ambiental (FING-UDELAR), Montevideo 11300, Uruguay
3
Center for Renewable Energy, Federal University of Pernambuco (CER-UFPE), Recife 50670-901, Brazil
4
Graduate Program in Nuclear and Energy Technologies (PROTEN), Federal University of Pernambuco (UFPE), Recife 50670-901, Brazil

Abstract

In the framework of the wind energy network for distributed generation in urban environments for most South American countries, wind resource assessment studies have been carried out in activities to establish a suitable methodology to assess the wind potential in urban environments. Some methodologies are already published in research studies, and the wind tunnel is the most accurate solution to obtain insight into the wind resource when measurements are unavailable, which is the most frequent case. Nevertheless, besides its validity, one cannot disregard the high cost of producing a scaled urban model and access to a wind tunnel. In this sense, this paper compares results from a wind tunnel experiment and different numerical modeling approaches. Two commercial models (WindSim and Wasp Engineering) and one open-source CFD code (OpenFOAM) are used. The results from the modeling simulation concluded that CFD models could achieve lower deviations for the mean wind speed and turbulence intensity when compared with non-CFD models. With such results, CFD modeling is a promising tool for reliably evaluating wind potential in urban environments.

Article Metrics

Citations

Article Access Statistics

Multiple requests from the same IP address are counted as one view.