Physchem, Volume 6, Issue 2 (June 2026) – 10 articles

Glyphosate is a highly polar herbicide, the reliable molecular recognition of which is complicated by co-occurring structural analogues, metabolites, and derivatives in real-world samples. Rather than reporting new aptamer discovery, this study establishes a standardized, solution-phase isothermal titration calorimetry (ITC) workflow to thermodynamically reassess two literature-reported glyphosate DNA aptamers, Seq03 and Seq05, under matched buffer composition and instrument settings. After verification of baseline stability and evaluation of heat-of-dilution contributions, ligand-to-aptamer titrations yielded apparent dissociation constants of approximately 8.14 μM for Seq03 and 40.2 μM for Seq05, enabling affinity-based prioritization of these reported candidates within the tested concentration window. To define an application-relevant selectivity boundary, we further constructed a counter-screen panel restricted to glyphosate-related chemicals, including structural analogues, metabolites, and derivatives, and evaluated all candidates using an identical ITC protocol with explicit background handling. None of the counter-screen compounds produced binding-consistent, saturable isotherms after integration and control-based interpretation; instead, their responses remained close to background heat and were therefore operationally classified as having no detectable binding under the tested conditions, including a reverse-titration format check with Glufosinate-N-acetyl. Collectively, these results position ITC as a label-free, platform-independent validation step for small-molecule aptamer benchmarking prior to analytical translation, while also highlighting that the present conclusions are bounded by the tested PBS-based conditions and the sensitivity window of the current ITC configuration. Full article

The widespread adoption of additive manufacturing, particularly selective laser sintering (SLS), has raised concerns about the disposal of unused thermoplastic powder residues, such as polyamide 12 (PA12). The high cost of PA12 and its degradation during the SLS process highlight the need for sustainable reuse strategies. This study evaluates the feasibility of reprocessing non-sintered PA12 powder without the addition of virgin material through fused deposition modeling (FDM) and injection molding (IM). Thermal analysis showed that the material retains processing temperatures comparable to virgin PA12. However, a significant reduction in melt flow index (≈61%) was observed, reflecting reduced processability and suggesting molecular-level changes affecting chain mobility. Injection molding demonstrated consistent mechanical behavior and good ductility, confirming its suitability for processing recycled PA12. In contrast, FDM processing resulted in higher variability and reduced ductility, mainly due to limitations in interlayer bonding associated with the increased viscosity of the material. Overall, the results highlight injection molding as a robust route for the valorization of non-sintered PA12, while FDM remains a feasible but less reliable alternative requiring further optimization. Full article

This study uses a bismuth ferrite (BiFeO₃) and MXene (Ti₃C₂Tx) to design a surface plasmon resonance (SPR) biosensor for the sensitivity enhancement at a 633 nm wavelength. Here, MXene serves as a biorecognition element (BRE) layer to ensure stable and reliable biomolecule adsorption. The MXene is a family of two-dimensional (2D) materials with metallic-like conductivity, a large surface area that can attach biomolecules, and improve biocompatibility. The addition of a conductive 2D MXene layer and a high-index BiFeO₃ dielectric layer greatly improves light–matter interaction and evanescent field penetration at the sensing interface. Strong plasmonic coupling is indicated by the reflectance analysis, which shows a distinct and consistent shift in the resonance angle as analyte RI increases. This study examined the sensitivity at optimized Ag and BiFeO₃ layer thickness. At an Ag of 39 nm and BiFeO₃ of 3 nm thickness, the maximal sensitivity of 340.68°/RIU with a remarkable figure of merit (FoM) of 47.38/RIU is obtained. The overall detection accuracy (DA) and FoM are significantly improved by the large sensitivity enhancement, despite a slight increase in full width at half maximum (FWHM). Furthermore, the penetration depth (PD) of 198.50 nm (at RI:1.330) and 199.52 nm (at RI:1.335) is attained with the proposed structure. Due to its high sensitivity, reusability, and reproducibility, the SPR biosensor has the potential to be used in biochemical, environmental, and medical detection. Full article

This study reports that titanium nanoparticles can be used as a surface coating to enhance the corrosion resistance of 316 stainless steel. It specifically examines the influence of the deposition temperature (T_dep) on the coating’s structural and morphological properties, including corrosion behavior. TiO₂ nanoparticles were thoughtfully deposited on steel substrates at temperatures of 300, 400, and 500 °C using a horizontal hot-wall tubular reactor. This equipment was expertly engineered at the CIDETEQ laboratory through the metal–organic chemical vapor deposition (MOCVD) concept. Titanium isopropoxide [Ti(OC₃H₇)₄] was used as the precursor for the coating synthesis. Structural analysis was conducted using X-ray diffraction (XRD), energy-dispersive X-ray spectroscopy (EDS), and scanning electron microscopy (SEM). Corrosion performance was evaluated under accelerated conditions in 0.5 M H₂SO₄ using potentiodynamic anodic polarization (AP), cyclic voltammetry (CV), and electrochemical impedance spectroscopy (EIS). The corrosion test indicates that increasing T_dep significantly differentiates the coating morphology and improves corrosion resistance. AP revealed that the pitting potential (E_pit) shifted to more positive values, ranging from +1.4 to +1.5 V. CV voltammograms indicated that coated samples had lower passive current densities (I_p ≈ 10⁴ to 10⁵ A/cm²) than the bare substrate. EIS analysis demonstrated that the coating deposited at 500 °C processed the most favorable electrochemical performance, resisting corrosion for over 28 days. This coating achieved the highest electrical resistance (297 kΩ·cm²) and the lowest capacitance (2.7 μF/cm²), attributed to the formation of a crystalline anatase phase composed of pyramidal-like nanoparticle agglomerates (~40 nm). The dense packing structure effectively blocks charge-transfer pathways, restricting electron and ion transfer. Finally, MOCVD-based chemical surface modification with TiO₂ nanoparticles is considered an innovative method to improve the corrosion resistance of stainless steel, thereby prolonging its durability under accelerated sulfuric acid exposure. Full article

Polymer–graphene composites have emerged as an advantageous class of functional materials that combine the exceptional electrical, mechanical, and surface properties of graphene with the ability to be processed, modified, and made more flexible through polymers. Polymer–graphene composites have recently seen rapid growth in environmental applications, including water treatment, pollutant degradation, sensing, and energy–environment interfaces. This review critically examines recent advancements in polymer–graphene composites for catalysis (including photocatalysis, electrocatalysis, hydrogenation, and energy conversion) and environmental applications (such as water treatment, dye degradation, heavy-metal removal, and oil–water separation). There is considerable discussion about structure–property–performance relationships, catalytic and adsorption mechanisms, and the role of polymer matrices. Current challenges, scalability issues, and future research directions for sustainable, industrially viable polymer–graphene systems are highlighted. Full article

This study presents a statistically optimized protocol for the green synthesis of gold nanoparticles (Au NPs) using aqueous Kalanchoe pinnata leaf extract (AKPLE). An integrated experimental strategy, transitioning from preliminary one-factor-at-a-time (OFAT) screening to a five-factor Box–Behnken Design, was employed to model and simultaneously optimize two critical optical responses derived from surface plasmon resonance: the peak position (λ_max) and its absorbance intensity. Highly predictive quadratic models (R² > 0.97) revealed that synthesis outcomes are governed by significant nonlinear curvature, with minimal interaction effects. Multi-response optimization via a desirability function identified a harmonized set of conditions (HAuCl₄: 0.44 mM, AKPLE: 3.50% v/v, temperature: 80.6 °C, pH: 7.2, time: 66.7 min) predicted to minimize λ_max at 540 nm while maximizing absorbance to 0.61. Synthesis under these optimized conditions successfully produced spherical, crystalline Au NPs, as confirmed by characterization (average TEM size: 26.3 ± 4.1 nm; zeta potential: –30.45 mV). This work demonstrates that a hybrid OFAT-RSM approach is superior for the precise, multivariate optimization of plant-mediated Au NP synthesis, providing a validated and scalable framework to balance nanoparticle size and plasmonic intensity—an outcome unattainable through conventional OFAT methods. Full article

This study provides a theoretical assessment of the structural, electronic, and thermal properties of MgMH₃ (M = Mn and Ni) compounds using the full-potential linearized augmented plane wave (FP-LAPW) method, with a range of modern functionals. The thermoelectric properties that are surveyed here relate to the power factor, the dimensionless thermoelectric figure of merit, the thermal conductivity, and the electrical conductivity that are associated with these compounds. The study finds that MgNiH₃ has superior thermoelectric properties compared to MgMnH₃. The analysis of the band structure reveals that both materials conduct electricity like metals, as there is no energy gap (0 eV), indicating that the conduction and valence bands overlap. The thermal conductivity was found to be linearly related to an increase in temperature, whereas the electrical conductivity varied with temperature. At elevated temperatures, the maximum power factor values reach 1.45 × 10⁻³ W/(K².m) for MgMnH₃ and 1.96 × 10⁻³ W/(K².m) for MgNiH₃ at 900 K. Upon examination of the electronic states, the contributions to the metallic nature of these hydrides come largely from the Ni and Mn orbitals. This type of prospective information on the potential of MgNiH₃ and MgMnH₃ in industrial applications, especially thermoelectric applications, is a valuable contribution. Understanding their thermal and electronic structure will demonstrate their potential for industry. Full article

Green-synthesized silver nanoparticles (AgNPs) exhibit outstanding antibacterial and antioxidant potential for designing and developing nanomedicines and medical devices. Nephelium lappaceum or rambutan contains polyphenol-based phytochemicals, which suggests its suitability for the green synthesis of NPs. However, the lack of a systematic approach directly impacts the robustness and reproducibility of the process. Design of experiments can address these challenges in obtaining NPs with the desired quality profile. In this work, we demonstrated the advantages of a Plackett–Burman model in the semi-automated green synthesis of AgNPs using N. lappaceum peel extract. The extract concentration was the only significant factor affecting the particle size. The optimized NPs exhibited triangular and hexagonal morphologies and a hydrodynamic diameter of 80 nm after 24 h without a stabilizing agent, representing 1.2% prediction error according to the model’s equation. The in vitro antioxidant capacity was confirmed through the ABTS radical scavenging assay. The AgNPs displayed a minimum inhibitory concentration of 23.5 µg mL⁻¹ against Escherichia coli and Staphylococcus aureus. Overall, this work highlights the synergistic role between a DoE-assisted green synthesis, the phytochemicals from N. lappaceum peel extract, and the formed AgNPs, positioning this systematic approach as a sustainable and efficient process for novel antibacterial and antioxidant agents. Full article

This study reports the synthesis and evaluation of diclofenac-derived organotin(IV) complexes as photostabilizing additives for poly(vinyl chloride) (PVC). Diclofenac was selected as a ligand due to its aromatic structure and heteroatom-rich framework, enabling the formation of stable tin-based complexes with potential UV-absorbing and radical-scavenging properties. The synthesized di- and tri-organotin complexes were incorporated into PVC films at 0.5 wt.% and exposed to UV irradiation (365 nm) for up to 300 h to assess their stabilizing efficiency. Photodegradation was monitored by tracking changes in carbonyl, polyene, and hydroxyl indices, as well as weight loss and surface deterioration. Compared with blank PVC and ligand-containing films, the organotin-modified samples exhibited significantly slower growth of degradation indices, reduced mass loss, and improved surface integrity after irradiation. Among the evaluated additives, the tributyltin complex demonstrated the highest photostabilizing performance, showing superior retention of chlorine content and lower surface roughness parameters. Overall, the results indicate that diclofenac-based organotin(IV) complexes are effective photostabilizers for PVC, with the tributyltin derivative emerging as the most promising candidate for enhancing the durability of PVC materials under UV exposure. Full article

Efficient hydrogen separation and purification technology plays a crucial role in the hydrogen energy industry. VB-group alloy membranes have demonstrated favorable hydrogen permeability, but their hydrogen embrittlement resistance remains generally insufficient. This work designed Nb₃₅Hf₃₀Co₁₅Ni_20-xMo_x high-entropy alloy (HEA) membranes with regulated Ni and Mo contents. The influences of HEA compositions on microstructures, hydrogen permeability and hydrogen embrittlement resistance were systematically analyzed. On the one hand, the doping of Mo increased the volume and proportion of BCC-Nb phase, thus promoting hydrogen permeation; on the other hand, the hydrogen solubility was reduced, thus enhancing the hydrogen embrittlement resistance. The lattice distortion effect, sluggish diffusion effect and optimized Mo content collectively enhanced the comprehensive performance of Nb₃₅Hf₃₀Co₁₅Ni_12.5Mo_7.5, achieving a hydrogen permeability (Φ) of 2.68 × 10⁻⁸ mol H₂ m⁻¹·s⁻¹·Pa^−0.5 at 673 K and exhibiting excellent hydrogen embrittlement resistance, showing no hydrogen-induced fractures even at room temperature. This quantitatively demonstrates its excellent performance, which represents a certain breakthrough compared to related studies. The novel Nb₃₅Hf₃₀Co₁₅Ni_20-xMo_x HEA membranes offer excellent hydrogen permeability and improved hydrogen embrittlement resistance, thereby highlighting the potential for future hydrogen purification applications. Full article